From: Mel Gorman <mel@csn.ul.ie>
To: davej@codemonkey.org.uk, tony.luck@intel.com,
linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org,
bob.picco@hp.com, ak@suse.de, linux-mm@kvack.org
Cc: Mel Gorman <mel@csn.ul.ie>
Subject: [PATCH 4/7] Have x86_64 use add_active_range() and free_area_init_nodes
Date: Thu, 13 Apr 2006 00:21:57 +0100 (IST) [thread overview]
Message-ID: <20060412232157.18862.57051.sendpatchset@skynet> (raw)
In-Reply-To: <20060412232036.18862.84118.sendpatchset@skynet>
Size zones and holes in an architecture independent manner for x86_64.
This has only been boot tested on an x86_64 with NUMA and SRAT.
arch/x86_64/Kconfig | 3 ++
arch/x86_64/kernel/e820.c | 19 ++++++++++++
arch/x86_64/mm/init.c | 60 +---------------------------------------
arch/x86_64/mm/numa.c | 15 +++++-----
include/asm-x86_64/e820.h | 1
include/asm-x86_64/proto.h | 2 -
6 files changed, 33 insertions(+), 67 deletions(-)
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/Kconfig linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/Kconfig
--- linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/Kconfig 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/Kconfig 2006-04-12 20:04:36.000000000 +0100
@@ -73,6 +73,9 @@ config ARCH_MAY_HAVE_PC_FDC
bool
default y
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
config DMI
bool
default y
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/kernel/e820.c linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/kernel/e820.c
--- linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/kernel/e820.c 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/kernel/e820.c 2006-04-12 22:58:05.000000000 +0100
@@ -220,6 +220,25 @@ e820_hole_size(unsigned long start_pfn,
return ((end - start) - ram) >> PAGE_SHIFT;
}
+/* Walk the e820 map and register active regions */
+unsigned long __init
+e820_register_active_regions(void)
+{
+ int i;
+ unsigned long start_pa, end_pa;
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ if (ei->type != E820_RAM)
+ continue;
+
+ start_pa = round_up(ei->addr, PAGE_SIZE);
+ end_pa = round_down(ei->addr + ei->size, PAGE_SIZE);
+
+ add_active_range(0, start_pa >> PAGE_SHIFT,
+ end_pa >> PAGE_SHIFT);
+ }
+}
+
/*
* Mark e820 reserved areas as busy for the resource manager.
*/
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/mm/init.c linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/mm/init.c
--- linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/mm/init.c 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/mm/init.c 2006-04-12 20:04:36.000000000 +0100
@@ -405,69 +405,13 @@ void __cpuinit zap_low_mappings(int cpu)
__flush_tlb_all();
}
-/* Compute zone sizes for the DMA and DMA32 zones in a node. */
-__init void
-size_zones(unsigned long *z, unsigned long *h,
- unsigned long start_pfn, unsigned long end_pfn)
-{
- int i;
- unsigned long w;
-
- for (i = 0; i < MAX_NR_ZONES; i++)
- z[i] = 0;
-
- if (start_pfn < MAX_DMA_PFN)
- z[ZONE_DMA] = MAX_DMA_PFN - start_pfn;
- if (start_pfn < MAX_DMA32_PFN) {
- unsigned long dma32_pfn = MAX_DMA32_PFN;
- if (dma32_pfn > end_pfn)
- dma32_pfn = end_pfn;
- z[ZONE_DMA32] = dma32_pfn - start_pfn;
- }
- z[ZONE_NORMAL] = end_pfn - start_pfn;
-
- /* Remove lower zones from higher ones. */
- w = 0;
- for (i = 0; i < MAX_NR_ZONES; i++) {
- if (z[i])
- z[i] -= w;
- w += z[i];
- }
-
- /* Compute holes */
- w = start_pfn;
- for (i = 0; i < MAX_NR_ZONES; i++) {
- unsigned long s = w;
- w += z[i];
- h[i] = e820_hole_size(s, w);
- }
-
- /* Add the space pace needed for mem_map to the holes too. */
- for (i = 0; i < MAX_NR_ZONES; i++)
- h[i] += (z[i] * sizeof(struct page)) / PAGE_SIZE;
-
- /* The 16MB DMA zone has the kernel and other misc mappings.
- Account them too */
- if (h[ZONE_DMA]) {
- h[ZONE_DMA] += dma_reserve;
- if (h[ZONE_DMA] >= z[ZONE_DMA]) {
- printk(KERN_WARNING
- "Kernel too large and filling up ZONE_DMA?\n");
- h[ZONE_DMA] = z[ZONE_DMA];
- }
- }
-}
-
#ifndef CONFIG_NUMA
void __init paging_init(void)
{
- unsigned long zones[MAX_NR_ZONES], holes[MAX_NR_ZONES];
-
memory_present(0, 0, end_pfn);
sparse_init();
- size_zones(zones, holes, 0, end_pfn);
- free_area_init_node(0, NODE_DATA(0), zones,
- __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes);
+ e820_register_active_regions();
+ free_area_init_nodes(MAX_DMA_PFN, MAX_DMA32_PFN, end_pfn, end_pfn);
}
#endif
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/mm/numa.c linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/mm/numa.c
--- linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/mm/numa.c 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/mm/numa.c 2006-04-12 20:04:36.000000000 +0100
@@ -149,13 +149,12 @@ void __init setup_node_bootmem(int nodei
void __init setup_node_zones(int nodeid)
{
unsigned long start_pfn, end_pfn, memmapsize, limit;
- unsigned long zones[MAX_NR_ZONES];
- unsigned long holes[MAX_NR_ZONES];
start_pfn = node_start_pfn(nodeid);
end_pfn = node_end_pfn(nodeid);
+ add_active_range(nodeid, start_pfn, end_pfn);
- Dprintk(KERN_INFO "Setting up node %d %lx-%lx\n",
+ Dprintk(KERN_INFO "Setting up memmap for node %d %lx-%lx\n",
nodeid, start_pfn, end_pfn);
/* Try to allocate mem_map at end to not fill up precious <4GB
@@ -167,10 +166,6 @@ void __init setup_node_zones(int nodeid)
memmapsize, SMP_CACHE_BYTES,
round_down(limit - memmapsize, PAGE_SIZE),
limit);
-
- size_zones(zones, holes, start_pfn, end_pfn);
- free_area_init_node(nodeid, NODE_DATA(nodeid), zones,
- start_pfn, holes);
}
void __init numa_init_array(void)
@@ -312,12 +307,18 @@ static void __init arch_sparse_init(void
void __init paging_init(void)
{
int i;
+ unsigned long max_normal_pfn = 0;
arch_sparse_init();
for_each_online_node(i) {
setup_node_zones(i);
+ if (max_normal_pfn < node_end_pfn(i))
+ max_normal_pfn = node_end_pfn(i);
}
+
+ free_area_init_nodes(MAX_DMA_PFN, MAX_DMA32_PFN, max_normal_pfn,
+ max_normal_pfn);
}
/* [numa=off] */
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/include/asm-x86_64/e820.h linux-2.6.17-rc1-104-x86_64_use_init_nodes/include/asm-x86_64/e820.h
--- linux-2.6.17-rc1-103-x86_use_init_nodes/include/asm-x86_64/e820.h 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/include/asm-x86_64/e820.h 2006-04-12 20:04:36.000000000 +0100
@@ -53,6 +53,7 @@ extern void e820_bootmem_free(pg_data_t
extern void e820_setup_gap(void);
extern unsigned long e820_hole_size(unsigned long start_pfn,
unsigned long end_pfn);
+extern unsigned long e820_register_active_regions(void);
extern void __init parse_memopt(char *p, char **end);
extern void __init parse_memmapopt(char *p, char **end);
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/include/asm-x86_64/proto.h linux-2.6.17-rc1-104-x86_64_use_init_nodes/include/asm-x86_64/proto.h
--- linux-2.6.17-rc1-103-x86_use_init_nodes/include/asm-x86_64/proto.h 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/include/asm-x86_64/proto.h 2006-04-12 20:04:36.000000000 +0100
@@ -24,8 +24,6 @@ extern void mtrr_bp_init(void);
#define mtrr_bp_init() do {} while (0)
#endif
extern void init_memory_mapping(unsigned long start, unsigned long end);
-extern void size_zones(unsigned long *z, unsigned long *h,
- unsigned long start_pfn, unsigned long end_pfn);
extern void system_call(void);
extern int kernel_syscall(void);
WARNING: multiple messages have this Message-ID (diff)
From: Mel Gorman <mel@csn.ul.ie>
To: davej@codemonkey.org.uk, tony.luck@intel.com,
linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org,
bob.picco@hp.com, ak@suse.de, linux-mm@kvack.org
Cc: Mel Gorman <mel@csn.ul.ie>
Subject: [PATCH 4/7] Have x86_64 use add_active_range() and free_area_init_nodes
Date: Thu, 13 Apr 2006 00:21:57 +0100 (IST) [thread overview]
Message-ID: <20060412232157.18862.57051.sendpatchset@skynet> (raw)
In-Reply-To: <20060412232036.18862.84118.sendpatchset@skynet>
Size zones and holes in an architecture independent manner for x86_64.
This has only been boot tested on an x86_64 with NUMA and SRAT.
arch/x86_64/Kconfig | 3 ++
arch/x86_64/kernel/e820.c | 19 ++++++++++++
arch/x86_64/mm/init.c | 60 +---------------------------------------
arch/x86_64/mm/numa.c | 15 +++++-----
include/asm-x86_64/e820.h | 1
include/asm-x86_64/proto.h | 2 -
6 files changed, 33 insertions(+), 67 deletions(-)
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/Kconfig linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/Kconfig
--- linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/Kconfig 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/Kconfig 2006-04-12 20:04:36.000000000 +0100
@@ -73,6 +73,9 @@ config ARCH_MAY_HAVE_PC_FDC
bool
default y
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
config DMI
bool
default y
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/kernel/e820.c linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/kernel/e820.c
--- linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/kernel/e820.c 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/kernel/e820.c 2006-04-12 22:58:05.000000000 +0100
@@ -220,6 +220,25 @@ e820_hole_size(unsigned long start_pfn,
return ((end - start) - ram) >> PAGE_SHIFT;
}
+/* Walk the e820 map and register active regions */
+unsigned long __init
+e820_register_active_regions(void)
+{
+ int i;
+ unsigned long start_pa, end_pa;
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ if (ei->type != E820_RAM)
+ continue;
+
+ start_pa = round_up(ei->addr, PAGE_SIZE);
+ end_pa = round_down(ei->addr + ei->size, PAGE_SIZE);
+
+ add_active_range(0, start_pa >> PAGE_SHIFT,
+ end_pa >> PAGE_SHIFT);
+ }
+}
+
/*
* Mark e820 reserved areas as busy for the resource manager.
*/
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/mm/init.c linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/mm/init.c
--- linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/mm/init.c 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/mm/init.c 2006-04-12 20:04:36.000000000 +0100
@@ -405,69 +405,13 @@ void __cpuinit zap_low_mappings(int cpu)
__flush_tlb_all();
}
-/* Compute zone sizes for the DMA and DMA32 zones in a node. */
-__init void
-size_zones(unsigned long *z, unsigned long *h,
- unsigned long start_pfn, unsigned long end_pfn)
-{
- int i;
- unsigned long w;
-
- for (i = 0; i < MAX_NR_ZONES; i++)
- z[i] = 0;
-
- if (start_pfn < MAX_DMA_PFN)
- z[ZONE_DMA] = MAX_DMA_PFN - start_pfn;
- if (start_pfn < MAX_DMA32_PFN) {
- unsigned long dma32_pfn = MAX_DMA32_PFN;
- if (dma32_pfn > end_pfn)
- dma32_pfn = end_pfn;
- z[ZONE_DMA32] = dma32_pfn - start_pfn;
- }
- z[ZONE_NORMAL] = end_pfn - start_pfn;
-
- /* Remove lower zones from higher ones. */
- w = 0;
- for (i = 0; i < MAX_NR_ZONES; i++) {
- if (z[i])
- z[i] -= w;
- w += z[i];
- }
-
- /* Compute holes */
- w = start_pfn;
- for (i = 0; i < MAX_NR_ZONES; i++) {
- unsigned long s = w;
- w += z[i];
- h[i] = e820_hole_size(s, w);
- }
-
- /* Add the space pace needed for mem_map to the holes too. */
- for (i = 0; i < MAX_NR_ZONES; i++)
- h[i] += (z[i] * sizeof(struct page)) / PAGE_SIZE;
-
- /* The 16MB DMA zone has the kernel and other misc mappings.
- Account them too */
- if (h[ZONE_DMA]) {
- h[ZONE_DMA] += dma_reserve;
- if (h[ZONE_DMA] >= z[ZONE_DMA]) {
- printk(KERN_WARNING
- "Kernel too large and filling up ZONE_DMA?\n");
- h[ZONE_DMA] = z[ZONE_DMA];
- }
- }
-}
-
#ifndef CONFIG_NUMA
void __init paging_init(void)
{
- unsigned long zones[MAX_NR_ZONES], holes[MAX_NR_ZONES];
-
memory_present(0, 0, end_pfn);
sparse_init();
- size_zones(zones, holes, 0, end_pfn);
- free_area_init_node(0, NODE_DATA(0), zones,
- __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes);
+ e820_register_active_regions();
+ free_area_init_nodes(MAX_DMA_PFN, MAX_DMA32_PFN, end_pfn, end_pfn);
}
#endif
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/mm/numa.c linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/mm/numa.c
--- linux-2.6.17-rc1-103-x86_use_init_nodes/arch/x86_64/mm/numa.c 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/arch/x86_64/mm/numa.c 2006-04-12 20:04:36.000000000 +0100
@@ -149,13 +149,12 @@ void __init setup_node_bootmem(int nodei
void __init setup_node_zones(int nodeid)
{
unsigned long start_pfn, end_pfn, memmapsize, limit;
- unsigned long zones[MAX_NR_ZONES];
- unsigned long holes[MAX_NR_ZONES];
start_pfn = node_start_pfn(nodeid);
end_pfn = node_end_pfn(nodeid);
+ add_active_range(nodeid, start_pfn, end_pfn);
- Dprintk(KERN_INFO "Setting up node %d %lx-%lx\n",
+ Dprintk(KERN_INFO "Setting up memmap for node %d %lx-%lx\n",
nodeid, start_pfn, end_pfn);
/* Try to allocate mem_map at end to not fill up precious <4GB
@@ -167,10 +166,6 @@ void __init setup_node_zones(int nodeid)
memmapsize, SMP_CACHE_BYTES,
round_down(limit - memmapsize, PAGE_SIZE),
limit);
-
- size_zones(zones, holes, start_pfn, end_pfn);
- free_area_init_node(nodeid, NODE_DATA(nodeid), zones,
- start_pfn, holes);
}
void __init numa_init_array(void)
@@ -312,12 +307,18 @@ static void __init arch_sparse_init(void
void __init paging_init(void)
{
int i;
+ unsigned long max_normal_pfn = 0;
arch_sparse_init();
for_each_online_node(i) {
setup_node_zones(i);
+ if (max_normal_pfn < node_end_pfn(i))
+ max_normal_pfn = node_end_pfn(i);
}
+
+ free_area_init_nodes(MAX_DMA_PFN, MAX_DMA32_PFN, max_normal_pfn,
+ max_normal_pfn);
}
/* [numa=off] */
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/include/asm-x86_64/e820.h linux-2.6.17-rc1-104-x86_64_use_init_nodes/include/asm-x86_64/e820.h
--- linux-2.6.17-rc1-103-x86_use_init_nodes/include/asm-x86_64/e820.h 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/include/asm-x86_64/e820.h 2006-04-12 20:04:36.000000000 +0100
@@ -53,6 +53,7 @@ extern void e820_bootmem_free(pg_data_t
extern void e820_setup_gap(void);
extern unsigned long e820_hole_size(unsigned long start_pfn,
unsigned long end_pfn);
+extern unsigned long e820_register_active_regions(void);
extern void __init parse_memopt(char *p, char **end);
extern void __init parse_memmapopt(char *p, char **end);
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-103-x86_use_init_nodes/include/asm-x86_64/proto.h linux-2.6.17-rc1-104-x86_64_use_init_nodes/include/asm-x86_64/proto.h
--- linux-2.6.17-rc1-103-x86_use_init_nodes/include/asm-x86_64/proto.h 2006-04-03 04:22:10.000000000 +0100
+++ linux-2.6.17-rc1-104-x86_64_use_init_nodes/include/asm-x86_64/proto.h 2006-04-12 20:04:36.000000000 +0100
@@ -24,8 +24,6 @@ extern void mtrr_bp_init(void);
#define mtrr_bp_init() do {} while (0)
#endif
extern void init_memory_mapping(unsigned long start, unsigned long end);
-extern void size_zones(unsigned long *z, unsigned long *h,
- unsigned long start_pfn, unsigned long end_pfn);
extern void system_call(void);
extern int kernel_syscall(void);
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2006-04-12 23:22 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-12 23:20 [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V2 Mel Gorman
2006-04-12 23:20 ` Mel Gorman
2006-04-12 23:20 ` [PATCH 1/7] Introduce mechanism for registering active regions of memory Mel Gorman
2006-04-12 23:20 ` Mel Gorman
2006-04-12 23:21 ` [PATCH 2/7] Have Power use add_active_range() and free_area_init_nodes() Mel Gorman
2006-04-12 23:21 ` Mel Gorman
2006-04-12 23:21 ` [PATCH 3/7] Have x86 use add_active_range() and free_area_init_nodes Mel Gorman
2006-04-12 23:21 ` Mel Gorman
2006-04-12 23:21 ` Mel Gorman [this message]
2006-04-12 23:21 ` [PATCH 4/7] Have x86_64 " Mel Gorman
2006-04-12 23:22 ` [PATCH 5/7] Have ia64 " Mel Gorman
2006-04-12 23:22 ` Mel Gorman
2006-04-12 23:22 ` [PATCH 6/7] Break out memory initialisation code from page_alloc.c to mem_init.c Mel Gorman
2006-04-12 23:22 ` Mel Gorman
2006-04-12 23:22 ` [PATCH 7/7] Print out debugging information during initialisation Mel Gorman
2006-04-12 23:22 ` Mel Gorman
2006-04-12 23:53 ` [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V2 Andi Kleen
2006-04-12 23:53 ` Andi Kleen
2006-04-13 0:22 ` Mel Gorman
2006-04-13 0:22 ` Mel Gorman
2006-04-13 0:56 ` Andi Kleen
2006-04-13 0:56 ` Andi Kleen
2006-04-13 1:08 ` Dave Hansen
2006-04-13 1:08 ` Dave Hansen
2006-04-13 1:08 ` Dave Hansen
2006-04-13 10:24 ` Mel Gorman
2006-04-13 9:52 ` Mel Gorman
2006-04-13 9:52 ` Mel Gorman
2006-04-13 10:32 ` Yasunori Goto
2006-04-13 10:32 ` Yasunori Goto
2006-04-13 10:32 ` Yasunori Goto
2006-04-13 10:51 ` Mel Gorman
2006-04-13 10:51 ` Mel Gorman
2006-04-13 10:51 ` Mel Gorman
2006-04-13 17:19 ` Luck, Tony
2006-04-13 17:19 ` Luck, Tony
2006-04-13 17:19 ` Luck, Tony
2006-04-13 17:30 ` Mel Gorman
2006-04-13 17:30 ` Mel Gorman
2006-04-13 17:30 ` Mel Gorman
2006-04-13 17:47 ` Luck, Tony
2006-04-13 17:47 ` Luck, Tony
2006-04-13 17:47 ` Luck, Tony
2006-04-13 19:14 ` Mel Gorman
2006-04-13 19:14 ` Mel Gorman
2006-04-13 19:14 ` Mel Gorman
2006-04-13 21:53 ` Luck, Tony
2006-04-13 21:53 ` Luck, Tony
2006-04-13 21:53 ` Luck, Tony
2006-04-14 13:12 ` Mel Gorman
2006-04-14 13:12 ` Mel Gorman
2006-04-14 13:12 ` Mel Gorman
2006-04-14 20:53 ` Luck, Tony
2006-04-14 20:53 ` Luck, Tony
2006-04-14 20:53 ` Luck, Tony
2006-04-14 22:54 ` Mel Gorman
2006-04-14 22:54 ` Mel Gorman
2006-04-14 22:54 ` Mel Gorman
2006-04-14 23:17 ` Nigel Cunningham
2006-04-14 23:17 ` Nigel Cunningham
2006-04-14 23:50 ` Mel Gorman
2006-04-14 23:50 ` Mel Gorman
2006-04-14 23:50 ` Mel Gorman
-- strict thread matches above, loose matches on Subject: below --
2006-04-18 13:00 [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V3 Mel Gorman
2006-04-18 13:01 ` [PATCH 4/7] Have x86_64 use add_active_range() and free_area_init_nodes Mel Gorman
2006-04-18 13:01 ` Mel Gorman
2006-04-24 20:20 [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V4 Mel Gorman
2006-04-24 20:21 ` [PATCH 4/7] Have x86_64 use add_active_range() and free_area_init_nodes Mel Gorman
2006-04-24 20:21 ` Mel Gorman
2006-05-01 13:35 [PATCH 0/7] Sizing zones and holes in an architecture independent manner V5 Mel Gorman
2006-05-01 13:36 ` [PATCH 4/7] Have x86_64 use add_active_range() and free_area_init_nodes Mel Gorman
2006-05-01 13:36 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060412232157.18862.57051.sendpatchset@skynet \
--to=mel@csn.ul.ie \
--cc=ak@suse.de \
--cc=bob.picco@hp.com \
--cc=davej@codemonkey.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.