From: Tom Rini <trini@kernel.crashing.org>
To: Wolfgang Denk <wd@denx.de>
Cc: "linuxppc-dev@ozlabs.org list" <linuxppc-dev@ozlabs.org>,
Paul Mackerras <paulus@samba.org>
Subject: Re: FT u-boot shim
Date: Fri, 28 Apr 2006 12:44:57 -0700 [thread overview]
Message-ID: <20060428194457.GA458@smtp.west.cox.net> (raw)
In-Reply-To: <20060428191124.B202B353DAC@atlas.denx.de>
On Fri, Apr 28, 2006 at 09:11:24PM +0200, Wolfgang Denk wrote:
> In message <EA2821E8-FB7E-4DDA-8C18-C659B5483DC2@kernel.crashing.org>
> Kumar Gala wrote:
> >
> > What I envision as the way one boots for something like u-boot is one
> > of three options:
> > 1. using an old u-boot + boot wrapper (bd_t -> wrapper -> kernel)
> > 2. using a u-boot that is ft aware + dtb (boot command in u-boot
> > takes kernel & dtb images, updates blob and passes to kernel)
> > 3. using a u-boot that is ft aware + built in dtb.
> >
> > The issue is that for a given system/board you may need to support
> > multiple or all three. This raises the question where does the .dts
>
> Assuming we had 2., under which circumstances would we need 3. then?
Especially if we had mkuimage let you tack your dtb into the 'kernel'
image.
--
Tom Rini
http://gate.crashing.org/~trini/
next prev parent reply other threads:[~2006-04-28 20:50 UTC|newest]
Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-24 17:41 85xx FDT updates? Jon Loeliger
2006-04-24 19:04 ` Vitaly Bordug
2006-04-24 21:43 ` Kumar Gala
2006-04-24 22:31 ` Dan Malek
2006-04-25 6:08 ` Kumar Gala
2006-04-25 7:49 ` Eugene Surovegin
2006-04-25 14:05 ` Kumar Gala
2006-04-25 16:12 ` Eugene Surovegin
2006-04-25 16:25 ` Kumar Gala
2006-04-25 16:31 ` Eugene Surovegin
2006-04-25 16:51 ` Kumar Gala
2006-04-25 21:16 ` Wolfgang Denk
2006-04-25 21:19 ` Kumar Gala
2006-04-25 21:34 ` Wolfgang Denk
2006-04-25 16:49 ` Dan Malek
2006-04-25 16:55 ` Kumar Gala
2006-04-25 17:08 ` Eugene Surovegin
2006-04-25 17:39 ` Kumar Gala
2006-04-25 18:01 ` Eugene Surovegin
2006-04-25 18:14 ` Kumar Gala
2006-04-25 18:24 ` Eugene Surovegin
2006-04-25 18:29 ` Brent Cook
2006-04-25 18:33 ` Kumar Gala
2006-04-25 18:53 ` Eugene Surovegin
2006-04-25 19:20 ` Kumar Gala
2006-04-25 19:31 ` Eugene Surovegin
2006-04-25 19:41 ` Kumar Gala
2006-04-25 20:00 ` FT u-boot shim Kumar Gala
2006-04-25 21:30 ` Wolfgang Denk
2006-04-25 21:33 ` Kumar Gala
2006-04-25 21:39 ` Wolfgang Denk
2006-04-25 21:42 ` Kumar Gala
2006-04-25 22:28 ` Wolfgang Denk
2006-04-26 14:37 ` Kumar Gala
2006-04-26 19:19 ` Wolfgang Denk
2006-04-26 19:46 ` Geert Uytterhoeven
2006-04-27 18:18 ` Kumar Gala
2006-04-27 18:18 ` [U-Boot-Users] " Kumar Gala
2006-04-27 19:05 ` Wolfgang Denk
2006-04-27 19:05 ` [U-Boot-Users] " Wolfgang Denk
2006-04-27 19:20 ` Kumar Gala
2006-04-27 19:20 ` [U-Boot-Users] " Kumar Gala
2006-04-27 19:33 ` Jerry Van Baren
2006-04-27 19:33 ` [U-Boot-Users] " Jerry Van Baren
2006-04-27 19:42 ` Kumar Gala
2006-04-27 19:42 ` Kumar Gala
2006-04-27 19:43 ` Wolfgang Denk
2006-04-27 19:43 ` Wolfgang Denk
2006-04-27 20:40 ` Jerry Van Baren
2006-04-27 20:40 ` Jerry Van Baren
2006-04-27 21:25 ` Pantelis Antoniou
2006-04-27 21:25 ` Pantelis Antoniou
2006-04-27 21:45 ` Wolfgang Denk
2006-04-27 19:40 ` Wolfgang Denk
2006-04-27 19:40 ` [U-Boot-Users] " Wolfgang Denk
2006-04-27 19:46 ` Kumar Gala
2006-04-27 19:46 ` [U-Boot-Users] " Kumar Gala
2006-04-27 19:59 ` Kumar Gala
2006-04-27 19:59 ` [U-Boot-Users] " Kumar Gala
2006-04-27 21:36 ` Wolfgang Denk
2006-04-27 21:36 ` [U-Boot-Users] " Wolfgang Denk
2006-04-27 21:55 ` Tolunay Orkun
2006-04-27 21:55 ` Tolunay Orkun
2006-04-27 22:12 ` Wolfgang Denk
2006-04-27 22:28 ` Pantelis Antoniou
2006-04-27 22:55 ` Wolfgang Denk
2006-04-28 7:34 ` Pantelis Antoniou
2006-04-28 7:43 ` Wolfgang Denk
2006-04-28 8:03 ` Pantelis Antoniou
2006-04-28 9:37 ` ???
2006-04-28 9:51 ` Wolfgang Denk
2006-04-28 16:10 ` Tolunay Orkun
2006-04-28 16:36 ` [U-Boot-Users] Re: FT u-boot shim - using ramdisk? Roger Larsson
2006-04-28 19:30 ` Kumar Gala
2006-04-28 19:34 ` Wolfgang Denk
2006-04-25 21:33 ` FT u-boot shim Mark A. Greer
2006-04-25 21:38 ` Eugene Surovegin
2006-04-28 11:28 ` Paul Mackerras
2006-04-28 16:01 ` Kumar Gala
2006-04-28 19:11 ` Wolfgang Denk
2006-04-28 19:44 ` Tom Rini [this message]
2006-04-28 23:07 ` Wolfgang Denk
2006-04-28 23:22 ` Tom Rini
2006-04-29 0:32 ` Wolfgang Denk
2006-04-29 0:52 ` Tom Rini
2006-04-29 8:37 ` Wolfgang Denk
2006-04-29 15:33 ` Kumar Gala
2006-04-28 23:35 ` Paul Mackerras
2006-04-28 23:55 ` Wolfgang Denk
2006-04-28 19:52 ` Tom Rini
2006-04-25 18:48 ` 85xx FDT updates? Eugene Surovegin
2006-04-25 19:14 ` Andy Fleming
2006-04-25 19:22 ` Kumar Gala
2006-04-25 19:27 ` Eugene Surovegin
2006-04-25 19:58 ` Andy Fleming
2006-04-25 20:04 ` Eugene Surovegin
2006-04-25 21:29 ` Wolfgang Denk
2006-04-25 21:25 ` Wolfgang Denk
2006-04-25 18:31 ` Kumar Gala
2006-04-25 21:24 ` Wolfgang Denk
2006-04-25 21:32 ` Kumar Gala
2006-04-25 21:38 ` Wolfgang Denk
2006-04-25 21:22 ` Wolfgang Denk
2006-04-25 21:29 ` Kumar Gala
2006-04-25 21:36 ` Wolfgang Denk
2006-04-25 21:38 ` Kumar Gala
2006-04-25 22:22 ` Wolfgang Denk
2006-04-26 23:27 ` Dan Malek
2006-04-25 21:09 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2006-04-27 19:30 FT u-boot shim Rune Torgersen
2006-04-27 19:40 ` Kumar Gala
2006-04-27 19:45 ` Wolfgang Denk
2006-04-27 19:54 ` Kumar Gala
2006-04-27 21:34 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060428194457.GA458@smtp.west.cox.net \
--to=trini@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.