* Re: [PATCH] improve readability of arch/mips/Kconfig
@ 2006-05-05 18:17 Shane McDonald
2006-05-05 21:47 ` Ralf Baechle
0 siblings, 1 reply; 6+ messages in thread
From: Shane McDonald @ 2006-05-05 18:17 UTC (permalink / raw)
To: linux-mips
I'll try this again ... I think I've got the corrupt patch issue resolved.
From: Shane McDonald <shane_mcdonald@pmc-sierra.com>
The wording of the help entries for CPU_MIPS32_R1, CPU_MIPS32_R2,
CPU_MIPS64_R1, and CPU_MIPS64_R2 was confusing.
The entries have been slightly reworded to improve the readability.
Signed-off-by: Shane McDonald <shane_mcdonald@pmc-sierra.com>
---
diff -uprN a/arch/mips/Kconfig b/arch/mips/Kconfig
--- a/arch/mips/Kconfig 2006-05-04 16:25:32.000000000 -0600
+++ b/arch/mips/Kconfig 2006-05-04 16:50:08.000000000 -0600
@@ -1075,10 +1075,10 @@ config CPU_MIPS32_R1
Choose this option to build a kernel for release 1 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
MIPS processor are based on a MIPS32 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
- Release 2 of the MIPS32 architecture is available since several
- years so chances are you even have a MIPS32 Release 2 processor
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+ Release 2 of the MIPS32 architecture has been available for
+ several years so chances are you have a MIPS32 Release 2 processor
in which case you should choose CPU_MIPS32_R2 instead for better
performance.
@@ -1093,8 +1093,8 @@ config CPU_MIPS32_R2
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
MIPS processor are based on a MIPS32 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
config CPU_MIPS64_R1
bool "MIPS64 Release 1"
@@ -1108,10 +1108,10 @@ config CPU_MIPS64_R1
Choose this option to build a kernel for release 1 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
MIPS processor are based on a MIPS64 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
- Release 2 of the MIPS64 architecture is available since several
- years so chances are you even have a MIPS64 Release 2 processor
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+ Release 2 of the MIPS64 architecture has been available for
+ several years so chances are you have a MIPS64 Release 2 processor
in which case you should choose CPU_MIPS64_R2 instead for better
performance.
@@ -1127,8 +1127,8 @@ config CPU_MIPS64_R2
Choose this option to build a kernel for release 2 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
MIPS processor are based on a MIPS64 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
config CPU_R3000
bool "R3000"
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] improve readability of arch/mips/Kconfig
@ 2006-05-06 21:47 Shane McDonald
2006-05-11 16:43 ` Ralf Baechle
0 siblings, 1 reply; 6+ messages in thread
From: Shane McDonald @ 2006-05-06 21:47 UTC (permalink / raw)
To: linux-mips
> > I'll try this again ... I think I've got the corrupt patch
> issue resolved.
>
> Nope, still all tabs converted to spaces.
>
> Ralf
Oops, heh heh. One last time before I crawl back under my rock...
From: Shane McDonald <shane_mcdonald@pmc-sierra.com>
The wording of the help entries for CPU_MIPS32_R1, CPU_MIPS32_R2,
CPU_MIPS64_R1, and CPU_MIPS64_R2 was confusing.
The entries have been slightly reworded to improve the readability.
Signed-off-by: Shane McDonald <shane_mcdonald@pmc-sierra.com>
---
diff -uprN a/arch/mips/Kconfig b/arch/mips/Kconfig
--- a/arch/mips/Kconfig 2006-05-04 16:25:32.000000000 -0600
+++ b/arch/mips/Kconfig 2006-05-04 16:50:08.000000000 -0600
@@ -1075,10 +1075,10 @@ config CPU_MIPS32_R1
Choose this option to build a kernel for release 1 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
MIPS processor are based on a MIPS32 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
- Release 2 of the MIPS32 architecture is available since several
- years so chances are you even have a MIPS32 Release 2 processor
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+ Release 2 of the MIPS32 architecture has been available for
+ several years so chances are you have a MIPS32 Release 2 processor
in which case you should choose CPU_MIPS32_R2 instead for better
performance.
@@ -1093,8 +1093,8 @@ config CPU_MIPS32_R2
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
MIPS processor are based on a MIPS32 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
config CPU_MIPS64_R1
bool "MIPS64 Release 1"
@@ -1108,10 +1108,10 @@ config CPU_MIPS64_R1
Choose this option to build a kernel for release 1 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
MIPS processor are based on a MIPS64 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
- Release 2 of the MIPS64 architecture is available since several
- years so chances are you even have a MIPS64 Release 2 processor
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+ Release 2 of the MIPS64 architecture has been available for
+ several years so chances are you have a MIPS64 Release 2 processor
in which case you should choose CPU_MIPS64_R2 instead for better
performance.
@@ -1127,8 +1127,8 @@ config CPU_MIPS64_R2
Choose this option to build a kernel for release 2 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
MIPS processor are based on a MIPS64 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
config CPU_R3000
bool "R3000"
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] improve readability of arch/mips/Kconfig
@ 2006-05-01 20:28 Shane McDonald
2006-05-02 20:27 ` Ralf Baechle
0 siblings, 1 reply; 6+ messages in thread
From: Shane McDonald @ 2006-05-01 20:28 UTC (permalink / raw)
To: linux-mips
From: Shane McDonald <shane_mcdonald@pmc-sierra.com>
The wording of the help entries for CPU_MIPS32_R1, CPU_MIPS32_R2,
CPU_MIPS64_R1, and CPU_MIPS64_R2 was confusing.
The entries have been slightly reworded to improve the readability.
Signed-off-by: Shane McDonald <shane_mcdonald@pmc-sierra.com>
---
diff -uprN a/arch/mips/Kconfig b/arch/mips/Kconfig
--- a/arch/mips/Kconfig 2006-05-01 13:41:40.000000000 -0600
+++ b/arch/mips/Kconfig 2006-05-01 13:54:26.000000000 -0600
@@ -1075,10 +1075,10 @@ config CPU_MIPS32_R1
Choose this option to build a kernel for release 1 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
MIPS processor are based on a MIPS32 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
- Release 2 of the MIPS32 architecture is available since several
- years so chances are you even have a MIPS32 Release 2 processor
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+ Release 2 of the MIPS32 architecture has been available for
+ several years so chances are you have a MIPS32 Release 2 processor
in which case you should choose CPU_MIPS32_R2 instead for better
performance.
@@ -1093,8 +1093,8 @@ config CPU_MIPS32_R2
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
MIPS processor are based on a MIPS32 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
config CPU_MIPS64_R1
bool "MIPS64 Release 1"
@@ -1108,10 +1108,10 @@ config CPU_MIPS64_R1
Choose this option to build a kernel for release 1 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
MIPS processor are based on a MIPS64 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
- Release 2 of the MIPS64 architecture is available since several
- years so chances are you even have a MIPS64 Release 2 processor
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+ Release 2 of the MIPS64 architecture has been available for
+ several years so chances are you have a MIPS64 Release 2 processor
in which case you should choose CPU_MIPS64_R2 instead for better
performance.
@@ -1127,8 +1127,8 @@ config CPU_MIPS64_R2
Choose this option to build a kernel for release 2 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
MIPS processor are based on a MIPS64 processor. If you know the
- specific type of processor in your system, choose those that one
- otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+ specific type of processor in your system, choose that one;
+ otherwise, CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
config CPU_R3000
bool "R3000"
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-05-11 16:43 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-05 18:17 [PATCH] improve readability of arch/mips/Kconfig Shane McDonald
2006-05-05 21:47 ` Ralf Baechle
-- strict thread matches above, loose matches on Subject: below --
2006-05-06 21:47 Shane McDonald
2006-05-11 16:43 ` Ralf Baechle
2006-05-01 20:28 Shane McDonald
2006-05-02 20:27 ` Ralf Baechle
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.