From: Alberto Bertogli <albertito@gmail.com>
To: Blaisorblade <blaisorblade@yahoo.it>
Cc: user-mode-linux-devel@lists.sourceforge.net,
Jeff Dike <jdike@addtoit.com>,
linux-kernel@vger.kernel.org
Subject: Re: [uml-devel] [UML] Problems building and running 2.6.17-rc4 on x86-64
Date: Thu, 18 May 2006 16:48:43 -0300 [thread overview]
Message-ID: <20060518194843.GA9593@gmail.com> (raw)
In-Reply-To: <200605170836.41009.blaisorblade@yahoo.it>
On Wed, May 17, 2006 at 08:36:40AM +0200, Blaisorblade wrote:
> On Wednesday 17 May 2006 04:39, Alberto Bertogli wrote:
> > On Tue, May 16, 2006 at 03:12:44PM -0400, Jeff Dike wrote:
> > > On Mon, May 15, 2006 at 12:29:58PM -0300, Alberto Bertogli wrote:
> > Here it is. While the patch worked, it was for 2.6.16, and I'm using
> > 2.6.17-rc4, I hope that's not a problem.
>
> Guess not - I'll test this patch soon because I have the same problem, however
> are you running a 2.6.16 host?
>
> If so, can you verify whether on a 2.6.15 host kernel the same binary runs
> fine (as is the case for me)?
I tried running 2.6.15.1 and 2.6.17-rc1 on the host. Both advanced more
than 2.6.17-rc4, but failed in different ways.
2.6.15.1 was the most successful one, it managed to boot and it kinda
worked, but I got semi-random segmentation faults when running some apps
like apt-get. I reported this some time ago to Jeff Dike.
2.6.17-rc1 didn't got that far, and 'panic'ed when starting runlevel 2;
I attach the output below.
Do you want me to try anything else?
Thanks,
Alberto
Initializing random number generator...done.
INIT: Entering runlevel: 2
INIT: PANIC: segmentation violation! sleeping for 30 seconds.
[42949380.750000] BUG: failure at /usr/src/linux-2.6.17-rc4/include/linux/elfcore.h:95/elf_core_copy_regs()!
[42949380.750000] Kernel panic - not syncing: BUG!
[42949380.750000]
[42949380.750000] Modules linked in:
[42949380.750000] Pid: 444, comm: init Not tainted 2.6.17-rc4
[42949380.750000] RIP: 0033:[<0000000040145896>]
[42949380.750000] RSP: 0000007f7f811f30 EFLAGS: 00000246
[42949380.750000] RAX: 0000000000000000 RBX: 0000000040017600 RCX: ffffffffffffffff
[42949380.750000] RDX: 0000000000000000 RSI: 0000007f7f811f48 RDI: 0000000000000002
[42949380.750000] RBP: 0000000000000000 R08: 00000000000001bc R09: 000000000000000b
[42949380.750000] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000002
[42949380.750000] R13: 00000000005096bc R14: 0000000000406b21 R15: 0000000000406b21
[42949380.750000] Call Trace:
[42949380.750000] 67efb768: [<6001a10a>] panic_exit+0x2a/0x50
[42949380.750000] 67efb778: [<60044acc>] notifier_call_chain+0x1c/0x30
[42949380.750000] 67efb798: [<600348cf>] panic+0xcf/0x170
[42949380.750000] 67efb7b8: [<600c336f>] ext3_mark_iloc_dirty+0xf/0x20
[42949380.750000] 67efb7f8: [<600c7000>] ext3_orphan_del+0x1d0/0x280
[42949380.750000] 67efb808: [<600c3528>] ext3_dirty_inode+0x78/0xa0
[42949380.750000] 67efb838: [<6009d1c2>] __mark_inode_dirty+0x102/0x1b0
[42949380.750000] 67efb848: [<600285b4>] set_signals+0x14/0x30
[42949380.750000] 67efb858: [<600742c8>] kmem_cache_alloc+0x48/0x70
[42949380.750000] 67efb878: [<600aa4e4>] elf_core_dump+0x264/0x2f0
[42949380.750000] 67efb938: [<6007554d>] do_truncate+0x5d/0x70
[42949380.750000] 67efb9a8: [<600842e7>] do_coredump+0x2c7/0x370
[42949380.750000] 67efba48: [<60040bd9>] recalc_sigpending+0x19/0x20
[42949380.750000] 67efba58: [<60041064>] __dequeue_signal+0x84/0xf0
[42949380.750000] 67efbad8: [<600432e3>] get_signal_to_deliver+0x3e3/0x400
[42949380.750000] 67efbb68: [<60065b6d>] __handle_mm_fault+0x23d/0x280
[42949380.750000] 67efbb88: [<6013f13e>] __up_read+0x1e/0xc0
[42949380.750000] 67efbbe8: [<60017866>] kern_do_signal+0x86/0x230
[42949380.750000] 67efbc00: [<6001b370>] copy_chunk_from_user+0x0/0x40
[42949380.750000] 67efbc18: [<600197cb>] segv+0x21b/0x300
[42949380.750000] 67efbcb8: [<6002b8f8>] wait_stub_done+0x58/0x110
[42949380.750000] 67efbce8: [<600434de>] sys_rt_sigprocmask+0x7e/0x120
[42949380.750000] 67efbd28: [<60017a30>] do_signal+0x20/0x30
[42949380.750000] 67efbd38: [<60016795>] interrupt_end+0x45/0x60
[42949380.750000] 67efbd58: [<6002be8c>] userspace+0x15c/0x2f0
[42949380.750000] 67efbd78: [<6001b502>] copy_to_user_skas+0x72/0x90
[42949380.750000] 67efbde8: [<6001a8fe>] fork_handler+0xee/0x100
[42949380.750000]
[42949380.750000] * route del -host 192.168.0.2 dev tap0
[42949380.750000] * bash -c echo 0 > /proc/sys/net/ipv4/conf/tap0/proxy_arp
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
WARNING: multiple messages have this Message-ID (diff)
From: Alberto Bertogli <albertito@gmail.com>
To: Blaisorblade <blaisorblade@yahoo.it>
Cc: user-mode-linux-devel@lists.sourceforge.net,
Jeff Dike <jdike@addtoit.com>,
linux-kernel@vger.kernel.org
Subject: Re: [uml-devel] [UML] Problems building and running 2.6.17-rc4 on x86-64
Date: Thu, 18 May 2006 16:48:43 -0300 [thread overview]
Message-ID: <20060518194843.GA9593@gmail.com> (raw)
In-Reply-To: <200605170836.41009.blaisorblade@yahoo.it>
On Wed, May 17, 2006 at 08:36:40AM +0200, Blaisorblade wrote:
> On Wednesday 17 May 2006 04:39, Alberto Bertogli wrote:
> > On Tue, May 16, 2006 at 03:12:44PM -0400, Jeff Dike wrote:
> > > On Mon, May 15, 2006 at 12:29:58PM -0300, Alberto Bertogli wrote:
> > Here it is. While the patch worked, it was for 2.6.16, and I'm using
> > 2.6.17-rc4, I hope that's not a problem.
>
> Guess not - I'll test this patch soon because I have the same problem, however
> are you running a 2.6.16 host?
>
> If so, can you verify whether on a 2.6.15 host kernel the same binary runs
> fine (as is the case for me)?
I tried running 2.6.15.1 and 2.6.17-rc1 on the host. Both advanced more
than 2.6.17-rc4, but failed in different ways.
2.6.15.1 was the most successful one, it managed to boot and it kinda
worked, but I got semi-random segmentation faults when running some apps
like apt-get. I reported this some time ago to Jeff Dike.
2.6.17-rc1 didn't got that far, and 'panic'ed when starting runlevel 2;
I attach the output below.
Do you want me to try anything else?
Thanks,
Alberto
Initializing random number generator...done.
INIT: Entering runlevel: 2
INIT: PANIC: segmentation violation! sleeping for 30 seconds.
[42949380.750000] BUG: failure at /usr/src/linux-2.6.17-rc4/include/linux/elfcore.h:95/elf_core_copy_regs()!
[42949380.750000] Kernel panic - not syncing: BUG!
[42949380.750000]
[42949380.750000] Modules linked in:
[42949380.750000] Pid: 444, comm: init Not tainted 2.6.17-rc4
[42949380.750000] RIP: 0033:[<0000000040145896>]
[42949380.750000] RSP: 0000007f7f811f30 EFLAGS: 00000246
[42949380.750000] RAX: 0000000000000000 RBX: 0000000040017600 RCX: ffffffffffffffff
[42949380.750000] RDX: 0000000000000000 RSI: 0000007f7f811f48 RDI: 0000000000000002
[42949380.750000] RBP: 0000000000000000 R08: 00000000000001bc R09: 000000000000000b
[42949380.750000] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000002
[42949380.750000] R13: 00000000005096bc R14: 0000000000406b21 R15: 0000000000406b21
[42949380.750000] Call Trace:
[42949380.750000] 67efb768: [<6001a10a>] panic_exit+0x2a/0x50
[42949380.750000] 67efb778: [<60044acc>] notifier_call_chain+0x1c/0x30
[42949380.750000] 67efb798: [<600348cf>] panic+0xcf/0x170
[42949380.750000] 67efb7b8: [<600c336f>] ext3_mark_iloc_dirty+0xf/0x20
[42949380.750000] 67efb7f8: [<600c7000>] ext3_orphan_del+0x1d0/0x280
[42949380.750000] 67efb808: [<600c3528>] ext3_dirty_inode+0x78/0xa0
[42949380.750000] 67efb838: [<6009d1c2>] __mark_inode_dirty+0x102/0x1b0
[42949380.750000] 67efb848: [<600285b4>] set_signals+0x14/0x30
[42949380.750000] 67efb858: [<600742c8>] kmem_cache_alloc+0x48/0x70
[42949380.750000] 67efb878: [<600aa4e4>] elf_core_dump+0x264/0x2f0
[42949380.750000] 67efb938: [<6007554d>] do_truncate+0x5d/0x70
[42949380.750000] 67efb9a8: [<600842e7>] do_coredump+0x2c7/0x370
[42949380.750000] 67efba48: [<60040bd9>] recalc_sigpending+0x19/0x20
[42949380.750000] 67efba58: [<60041064>] __dequeue_signal+0x84/0xf0
[42949380.750000] 67efbad8: [<600432e3>] get_signal_to_deliver+0x3e3/0x400
[42949380.750000] 67efbb68: [<60065b6d>] __handle_mm_fault+0x23d/0x280
[42949380.750000] 67efbb88: [<6013f13e>] __up_read+0x1e/0xc0
[42949380.750000] 67efbbe8: [<60017866>] kern_do_signal+0x86/0x230
[42949380.750000] 67efbc00: [<6001b370>] copy_chunk_from_user+0x0/0x40
[42949380.750000] 67efbc18: [<600197cb>] segv+0x21b/0x300
[42949380.750000] 67efbcb8: [<6002b8f8>] wait_stub_done+0x58/0x110
[42949380.750000] 67efbce8: [<600434de>] sys_rt_sigprocmask+0x7e/0x120
[42949380.750000] 67efbd28: [<60017a30>] do_signal+0x20/0x30
[42949380.750000] 67efbd38: [<60016795>] interrupt_end+0x45/0x60
[42949380.750000] 67efbd58: [<6002be8c>] userspace+0x15c/0x2f0
[42949380.750000] 67efbd78: [<6001b502>] copy_to_user_skas+0x72/0x90
[42949380.750000] 67efbde8: [<6001a8fe>] fork_handler+0xee/0x100
[42949380.750000]
[42949380.750000] * route del -host 192.168.0.2 dev tap0
[42949380.750000] * bash -c echo 0 > /proc/sys/net/ipv4/conf/tap0/proxy_arp
next prev parent reply other threads:[~2006-05-18 19:49 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-14 18:25 [uml-devel] [UML] Problems building and running 2.6.17-rc4 on x86-64 Alberto Bertogli
2006-05-14 18:25 ` Alberto Bertogli
2006-05-15 3:39 ` [uml-devel] " Jeff Dike
2006-05-15 3:39 ` Jeff Dike
2006-05-15 15:29 ` Alberto Bertogli
2006-05-15 15:29 ` Alberto Bertogli
2006-05-16 19:12 ` Jeff Dike
2006-05-16 19:12 ` Jeff Dike
2006-05-17 2:39 ` [uml-devel] [UML] Problems building and running 2.6.17-rc4 on x86-64ync-mailbox><next-undeleted><enter-command>set editor=vim Alberto Bertogli
2006-05-17 2:39 ` Alberto Bertogli
2006-05-17 6:36 ` Blaisorblade
2006-05-17 6:36 ` Blaisorblade
2006-05-17 18:57 ` [uml-devel] [UML] Problems building and running 2.6.17-rc4 on x86-64 Alberto Bertogli
2006-05-17 18:57 ` Alberto Bertogli
2006-05-18 19:48 ` Alberto Bertogli [this message]
2006-05-18 19:48 ` Alberto Bertogli
2006-05-19 1:20 ` Blaisorblade
2006-05-19 1:20 ` Blaisorblade
2006-05-17 18:12 ` [uml-devel] [UML] Problems building and running 2.6.17-rc4 on x86-64ync-mailbox><next-undeleted><enter-command>set editor=vim Jeff Dike
2006-05-17 18:12 ` Jeff Dike
2006-05-17 18:38 ` [uml-devel] [UML] Problems building and running 2.6.17-rc4 on x86-64 Alberto Bertogli
2006-05-17 18:38 ` Alberto Bertogli
2006-06-13 14:57 ` Alberto Bertogli
2006-06-13 14:57 ` Alberto Bertogli
2006-06-13 18:21 ` [uml-devel] " Jeff Dike
2006-06-13 18:21 ` Jeff Dike
2006-06-13 23:45 ` [uml-devel] " Paolo Giarrusso
2006-06-13 23:45 ` Paolo Giarrusso
2006-06-14 19:22 ` [uml-devel] " Jeff Dike
2006-06-14 19:22 ` Jeff Dike
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060518194843.GA9593@gmail.com \
--to=albertito@gmail.com \
--cc=blaisorblade@yahoo.it \
--cc=jdike@addtoit.com \
--cc=linux-kernel@vger.kernel.org \
--cc=user-mode-linux-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.