[U-Boot-Users] PhyCore Board

[U-Boot-Users] PhyCore Board

[Kaushik karandikar]

Hi All, 
             I am using PhyCore board with ARM7TDMI. U-boot is working properly for this board when i did is all the required changes for this board  in u-boot.
             I wanna run the uClinux on this board. I just want to know about the entry-point in linux from u-boot. I am looking in the file lib/armlinux.c. 
  Where can i get the information about the booting of uClinux on Phytec board. What all changes do i need to do in u-boot fot booting linux on this board.
   
  Thanks and Regards,
  Kaushik
   

		
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2?/min or less.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060524/30e0ccc4/attachment.htm 

[U-Boot-Users] PhyCore Board

[Wolfgang Denk]

In message <20060524131021.89750.qmail@web30603.mail.mud.yahoo.com> you wrote:
>
>              I am using PhyCore board with ARM7TDMI. U-boot is working properly for this board when i did is all the required changes for this board  in u-boot.

Contgratulations. Then you are done with modifying U-Boot.

>              I wanna run the uClinux on this board. I just want to know about the entry-point in linux from u-boot. I am looking in the file lib/armlinux.c. 
>   Where can i get the information about the booting of uClinux on Phytec board. What all changes do i need to do in u-boot fot booting linux on this board.

You got this wrong. You don't modify U-Boot to boot Linux,  it's  the
other  way  round. You have to port Linux to your hardware. When this
has been done, U-Boot can be used to load and start the kernel.

> --0-191875865-1148476221=:89266
> Content-Type: text/html; charset=iso-8859-1
> Content-Transfer-Encoding: 8bit

Please NEVER post HTML on this list.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Lispers are among  the  best  grads  of  the  Sweep-It-Under-Someone-
Else's-Carpet  School of Simulated Simplicity. [Was that sufficiently
incendiary? :-)]  - Larry Wall in <1992Jan10.201804.11926@netlabs.com

[U-Boot-Users] PhyCore Board

[Robert Schwebel]

Kaushik,

On Wed, May 24, 2006 at 06:10:21AM -0700, Kaushik karandikar wrote:
> I am using PhyCore board with ARM7TDMI. U-boot is working properly for
> this board when i did is all the required changes for this board in
> u-boot.

Could you make your changes to U-Boot available to the public? It might
be interesting for other people as well.

> I wanna run the uClinux on this board. I just want to know about the
> entry-point in linux from u-boot. I am looking in the file
> lib/armlinux.c.  Where can i get the information about the booting of
> uClinux on Phytec board.  What all changes do i need to do in u-boot
> fot booting linux on this board.

As Wolfgang already told you you need to port Linux to the device.

Robert
-- 
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9