Multipath and LVM2 with hsg80

Multipath and LVM2 with hsg80

[John Vaughan]

[-- Attachment #1.1: Type: text/plain, Size: 524 bytes --]

 
 
Folks,
 
I have an hsg80 controller that I am trying to get to work with Redhat
ES 4 update 3.
 
I want to multipath and put LVM2 on top of the dm-# devices.
 
First,  Does this work and has it been tested?
 
Second,  Do I need to add the hp_sw handler to this release or is in
there already?
 
Third,  How do I get this to all work cleanly on boot?
 
 
I am asking  because I have not been able to get the correct
combination. And Redhat support has not been much help.
 
Thanks for the help
 
 

[-- Attachment #1.2: Type: text/html, Size: 2473 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: Multipath and LVM2 with hsg80

[Luca Berra]

On Sun, May 28, 2006 at 06:44:42PM -0400, John Vaughan wrote:
> 
> 
>Folks,
> 
>I have an hsg80 controller that I am trying to get to work with Redhat
>ES 4 update 3.
> 
>I want to multipath and put LVM2 on top of the dm-# devices.
> 
>First,  Does this work and has it been tested?

afaik it is not a supported configuration
http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=421487&targetPage=http%3A%2F%2Fh20000.www2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00635587%2Fc00635587.pdf

Regards,
L.

-- 
Luca Berra -- bluca@comedia.it
        Communication Media & Services S.r.l.
 /"\
 \ /     ASCII RIBBON CAMPAIGN
  X        AGAINST HTML MAIL
 / \