[lm-sensors] ASUS P4P 800 and sensors.conf

[mahashakti89@wanadoo.fr (mahashakti89)]

On Mon, May 22, 2006 at 10:31:01PM +0200, Rudolf Marek wrote :
> 
> Hello,
> 
> >I am using an ASUS P4P800 motherboard, and I cannot manage it to get
> >lm-sensors to work properly ; I mean some output values are obviously
> >quite wrong  :
> >
> >>w83627thf-isa-0290 Adapter: ISA adapter in0:       +1.57 V  (min =  +1.46 
> >>V, max =  +1.60 V)
> >>in1:       +3.14 V  (min =  +2.85 V, max =  +3.47 V)              
> >>e/claude/senso
> >>in2:       +3.23 V  (min =  +3.14 V, max =  +3.47 V)
> >>in3:       +2.96 V  (min =  +2.85 V, max =  +3.15 V)
> >>in4:       +4.08 V  (min =  +0.34 V, max =  +0.80 V)       ALARM
> >>in7:       +2.99 V  (min =  +2.83 V, max =  +3.12 V)
> >>in8:       +0.29 V  (min =  +2.40 V, max =  +3.60 V)       ALARM
> >>fan1:     1795 RPM  (min = 11250 RPM, div = 8)              ALARM
> >>fan2:     2235 RPM  (min = 5113 RPM, div = 4)              ALARM
> >>fan3:        0 RPM  (min =  620 RPM, div = 128)              ALARM
> >>temp1:       +50?C  (high =   +60?C, hyst =   +17?C)   sensor = thermistor
> >>temp2:     +41.0?C  (high =   +80?C, hyst =   +75?C)   sensor = thermistor
> >>temp3:     -48.0?C  (high =   +80?C, hyst =   +75?C)   sensor = thermistor
> >>vid:      +1.525 V  (VRM Version 9.0)
> >>alarms:
> >>beep_enable:
> >>          Sound alarm enabled
> >
> >I am ashamed to say that I didn't find the solution to get lm-sensors
> >work ,  so I could need some good help to get a working sensors.conf for
> >this motherboard and also the explication of the thing in order to
> >understand how to solve this problem next time.
> 
> There is a problem that the chip manufacturers must scale down the the 
> voltages to fit the ADC converters to its range. Problem is that the manuf. 
> are free
> to choose whatever resistors for scaling.
> 
> If you use acpi, please can you send us the dsdt.bin
> file?
> 
> You can obtain it via cat /proc/acpi/dsdt > /tmp/dsdt.bin
> 
> Thanks,
> regards
> Rudolf


Hi !

Just a few words to know if you received the file you were asking for, I
mean /tmp/dsdt.bin  ? And what could be the solution ? To wait for a new
version  of lm-sensors ??

Regards

mahashakti89