From: mahashakti89@wanadoo.fr (mahashakti89)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] ASUS P4P 800 and sensors.conf
Date: Sun, 21 May 2006 17:04:57 +0000 [thread overview]
Message-ID: <44709DB9.7000006@wanadoo.fr> (raw)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi !
I am using an ASUS P4P800 motherboard, and I cannot manage it to get
lm-sensors to work properly ; I mean some output values are obviously
quite wrong :
> w83627thf-isa-0290 Adapter: ISA adapter in0: +1.57 V (min = +1.46 V, max = +1.60 V)
> in1: +3.14 V (min = +2.85 V, max = +3.47 V) e/claude/sensor
> in2: +3.23 V (min = +3.14 V, max = +3.47 V)
> in3: +2.96 V (min = +2.85 V, max = +3.15 V)
> in4: +4.08 V (min = +0.34 V, max = +0.80 V) ALARM
> in7: +2.99 V (min = +2.83 V, max = +3.12 V)
> in8: +0.29 V (min = +2.40 V, max = +3.60 V) ALARM
> fan1: 1795 RPM (min = 11250 RPM, div = 8) ALARM
> fan2: 2235 RPM (min = 5113 RPM, div = 4) ALARM
> fan3: 0 RPM (min = 620 RPM, div = 128) ALARM
> temp1: +50?C (high = +60?C, hyst = +17?C) sensor = thermistor
> temp2: +41.0?C (high = +80?C, hyst = +75?C) sensor = thermistor
> temp3: -48.0?C (high = +80?C, hyst = +75?C) sensor = thermistor
> vid: +1.525 V (VRM Version 9.0)
> alarms:
> beep_enable:
> Sound alarm enabled
I am ashamed to say that I didn't find the solution to get lm-sensors
work , so I could need some good help to get a working sensors.conf for
this motherboard and also the explication of the thing in order to
understand how to solve this problem next time.
1.Output of sensors-detect
> To make the sensors modules behave correctly, add these lines to
> /etc/modules:
>
> #----cut here----
> # I2C adapter drivers
> # modprobe unknown adapter NVIDIA I2C Device
> # modprobe unknown adapter NVIDIA I2C Device
> # modprobe unknown adapter NVIDIA I2C Device
> i2c-i801
> i2c-isa
> # I2C chip drivers
> eeprom
> # Warning: the required module smbus-arp is not currently installed on your system.
> # For status of 2.6 kernel ports see http://secure.netroedge.com/~lm78/supported.html
> # If driver is built-in to the kernel, or unavailable, comment out the following line.
> smbus-arp
> w83627hf
> #----cut here----
2.lsmod
> Module Size Used by
> nls_cp437 5760 1
> vfat 9088 1
> ppp_async 8192 1
> crc_ccitt 2048 1 ppp_async
> nls_iso8859_15 4608 1
> cpufreq_ondemand 5392 1
> thermal 10760 0
> fan 3460 0
> button 5136 0
> processor 20172 1 thermal
> ipt_TOS 2176 12
> ipt_REJECT 3968 4
> ipt_LOG 5248 8
> xt_tcpudp 3072 25
> xt_state 1920 9
> xt_pkttype 1792 4
> iptable_raw 1792 0
> xt_CLASSIFY 2048 0
> ipt_owner 1920 0
> ipt_recent 8716 0
> ipt_iprange 1792 0
> ipt_policy 2816 0
> ipt_multiport 2304 4
> xt_conntrack 2304 0
> iptable_mangle 2304 1
> ip_nat_irc 2176 0
> ip_nat_tftp 1664 0
> ip_nat_ftp 2816 0
> iptable_nat 6276 0
> ip_nat 13204 4 ip_nat_irc,ip_nat_tftp,ip_nat_ftp,iptable_nat
> ip_conntrack_irc 5144 1 ip_nat_irc
> ip_conntrack_tftp 3348 1 ip_nat_tftp
> ip_conntrack_ftp 5660 1 ip_nat_ftp
> ip_conntrack 38340 10 xt_state,xt_conntrack,ip_nat_irc,ip_nat_tftp,ip_nat_ftp,iptable_nat,ip_nat,ip_conntrack_irc,ip_conntrack_tftp,ip_conntrack_ftp
> iptable_filter 2432 1
> ip_tables 9820 4 iptable_raw,iptable_mangle,iptable_nat,iptable_filter
> x_tables 9092 15 ipt_TOS,ipt_REJECT,ipt_LOG,xt_tcpudp,xt_state,xt_pkttype,xt_CLASSIFY,ipt_owner,ipt_recent,ipt_iprange,ipt_policy,ipt_multiport,xt_conntrack,iptable_nat,ip_tables
> nvidia 4539572 12
> cpufreq_userspace 3240 0
> cpufreq_powersave 1792 0
> smbfs 51064 0
> 8250_pci 18176 0
> bsd_comp 5120 0
> loop 11272 0
> sg 23836 0
> dm_zero 1920 0
> dm_snapshot 12448 0
> dm_crypt 8712 0
> dm_mod 39828 3 dm_zero,dm_snapshot,dm_crypt
> sha512 9600 0
> sha256 11392 0
> crc32c 1920 0
> blowfish 8960 0
> libcrc32c 2688 1 crc32c
> fuse 29324 0
> rivafb 44176 0
> nvidiafb 48156 0
> i2c_algo_bit 7560 2 rivafb,nvidiafb
> ohci_hcd 15748 0
> snd_seq_oss 25828 0
> snd_seq_midi_event 5760 1 snd_seq_oss
> snd_seq 42188 4 snd_seq_oss,snd_seq_midi_event
> snd_seq_device 6540 2 snd_seq_oss,snd_seq
> xfrm_user 13572 0
> af_key 24592 0
> udf 67104 0
> romfs 6276 0
> msdos 7424 0
> fat 39452 2 vfat,msdos
> binfmt_misc 8072 0
> binfmt_aout 6156 0
> vga16fb 10504 0
> vgastate 7296 2 rivafb,vga16fb
> usb_storage 29188 1
> usbhid 24452 0
> usblp 10368 0
> ppp_deflate 4608 1
> zlib_deflate 18208 1 ppp_deflate
> ppp_generic 19476 7 ppp_async,bsd_comp,ppp_deflate
> slhc 5632 1 ppp_generic
> ide_floppy 13184 0
> eeprom 5520 0
> i2c_dev 6688 0
> w83627hf 21264 0
> i2c_isa 3584 1 w83627hf
> lm75 6416 0
> hwmon_vid 2304 1 w83627hf
> drm 54420 0
> agpgart 23392 2 nvidia,drm
> nvram 6536 0
> video 13316 0
> hw_random 4760 0
> snd_intel8x0 25628 0
> snd_ac97_codec 79648 1 snd_intel8x0
> snd_ac97_bus 2048 1 snd_ac97_codec
> snd_pcm_oss 39200 0
> snd_mixer_oss 13696 1 snd_pcm_oss
> snd_pcm 65284 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
> snd_timer 17412 2 snd_seq,snd_pcm
> sd_mod 11264 3
> snd 39520 9 snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> 8250_pnp 8448 0
> hsfpcibasic2 59664 2
> hsfserial 20420 4 hsfpcibasic2
> uhci_hcd 24720 0
> ehci_hcd 24712 0
> ohci1394 26416 0
> hsfengine 1312660 2 hsfpcibasic2,hsfserial
> hsfosspec 84328 4 hsfpcibasic2,hsfserial,hsfengine
> 8250 18272 2 8250_pci,8250_pnp
> i2c_i801 7180 0
> ata_piix 7300 1
> libata 44560 1 ata_piix
> ieee1394 273464 1 ohci1394
> soundcore 6752 1 snd
> usbcore 95776 8 ohci_hcd,usb_storage,usbhid,usblp,uhci_hcd,ehci_hcd,hsfosspec
> serial_core 15104 2 hsfserial,8250
> scsi_mod 72044 4 sg,usb_storage,sd_mod,libata
> sk98lin 130400 0
> pcspkr 2692 0
> i2c_core 15360 10 nvidia,rivafb,nvidiafb,i2c_algo_bit,eeprom,i2c_dev,w83627hf,i2c_isa,lm75,i2c_i801
> snd_page_alloc 7688 2 snd_intel8x0,snd_pcm
> parport_pc 28272 0
> parport 30408 1 parport_pc
> rtc 9652 1
> ide_cd 31136 1
> hsfsoar 85384 1 hsfpcibasic2
3.Motherboard is an ASUS P4P800, Kernel is 2.6.16, lm-sensors version is
Version : 1:2.10.0-5
Hope it's not too long.
Thanks for your help
mahashakti89
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFEcJ24PPuyRSaD7LoRAhLjAKCX4TXpb9BCdUSA8Owwrn5o+Qo0swCgg8GD
MRhYZi4yFTcfsexEiUsIzII=lHAm
-----END PGP SIGNATURE-----
next reply other threads:[~2006-05-21 17:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-21 17:04 mahashakti89 [this message]
2006-05-22 20:31 ` [lm-sensors] ASUS P4P 800 and sensors.conf Rudolf Marek
2006-05-23 4:51 ` mahashakti89
2006-06-07 15:31 ` mahashakti89
2006-06-07 21:24 ` Rudolf Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44709DB9.7000006@wanadoo.fr \
--to=mahashakti89@wanadoo.fr \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.