* [lm-sensors] Intel 82801BA ICH2 worked some time ago
@ 2006-06-17 1:51 gimeshell at web.de
2006-06-18 0:04 ` gimeshell at web.de
0 siblings, 1 reply; 2+ messages in thread
From: gimeshell at web.de @ 2006-06-17 1:51 UTC (permalink / raw)
To: lm-sensors
Hi,
some time ago i used lm-sensors to monitor cpu temperature. That worked
so far. Now, perhaps one year later, i'm using Debian/sensors 2.9.1 but
i get totally shifted CPU temperature:
M/B Temp: +33?C (high = +105?C, hyst = +0?C)
CPU Temp: +5.2?C (high = +50?C, hyst = +46?C)
I have loaded modules i2c_i810 and w83781d.
Here is cut lspci output:
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 02)
Does anybody have an advice?
regards,
gimeshell
^ permalink raw reply [flat|nested] 2+ messages in thread
* [lm-sensors] Intel 82801BA ICH2 worked some time ago
2006-06-17 1:51 [lm-sensors] Intel 82801BA ICH2 worked some time ago gimeshell at web.de
@ 2006-06-18 0:04 ` gimeshell at web.de
0 siblings, 0 replies; 2+ messages in thread
From: gimeshell at web.de @ 2006-06-18 0:04 UTC (permalink / raw)
To: lm-sensors
solved. there is special line for my mainboard in sensors.conf.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-06-18 0:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-17 1:51 [lm-sensors] Intel 82801BA ICH2 worked some time ago gimeshell at web.de
2006-06-18 0:04 ` gimeshell at web.de
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.