All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Kok, Auke" <auke-jan.h.kok@intel.com>
To: "Garzik, Jeff" <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org, "Brandeburg,
	Jesse" <jesse.brandeburg@intel.com>,
	"Kok, Auke" <auke-jan.h.kok@intel.com>,
	"Kok, Auke" <auke@foo-projects.org>,
	"Ronciak, John" <john.ronciak@intel.com>
Subject: [PATCH 12/21] e1000: fix adapter led blinking inconsistency
Date: Wed, 21 Jun 2006 22:20:32 -0700	[thread overview]
Message-ID: <20060622052032.25497.4540.stgit@gitlost.site> (raw)
In-Reply-To: <20060622051815.25497.89192.stgit@gitlost.site>


Several e1000 adapters were not blinking correctly or inconsistently. This
patch cleans this up and makes them all behave the same as far as possible.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
---

 drivers/net/e1000/e1000_ethtool.c |   15 +--------------
 drivers/net/e1000/e1000_hw.c      |   38 +++++++++++++++++++++++++++++++++++++
 drivers/net/e1000/e1000_hw.h      |    1 +
 3 files changed, 40 insertions(+), 14 deletions(-)

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index cf5c5f4..0609155 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1786,21 +1786,8 @@ e1000_phys_id(struct net_device *netdev,
 		mod_timer(&adapter->blink_timer, jiffies);
 		msleep_interruptible(data * 1000);
 		del_timer_sync(&adapter->blink_timer);
-	} else if (adapter->hw.mac_type < e1000_82573) {
-		E1000_WRITE_REG(&adapter->hw, LEDCTL,
-			(E1000_LEDCTL_LED2_BLINK_RATE |
-			 E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK |
-			 (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT)));
-		msleep_interruptible(data * 1000);
 	} else {
-		E1000_WRITE_REG(&adapter->hw, LEDCTL,
-			(E1000_LEDCTL_LED2_BLINK_RATE |
-			 E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |
-			 (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT)));
+		e1000_blink_led_start(&adapter->hw);
 		msleep_interruptible(data * 1000);
 	}
 
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 749d621..1c5b184 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -5537,6 +5537,44 @@ e1000_setup_led(struct e1000_hw *hw)
 }
 
 /******************************************************************************
+ * Used on 82571 and later Si that has LED blink bits.
+ * Callers must use their own timer and should have already called
+ * e1000_id_led_init()
+ * Call e1000_cleanup led() to stop blinking
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+int32_t
+e1000_blink_led_start(struct e1000_hw *hw)
+{
+    int16_t  i;
+    uint32_t ledctl_blink = 0;
+
+    DEBUGFUNC("e1000_id_led_blink_on");
+
+    if (hw->mac_type < e1000_82571) {
+        /* Nothing to do */
+        return E1000_SUCCESS;
+    }
+    if (hw->media_type == e1000_media_type_fiber) {
+        /* always blink LED0 for PCI-E fiber */
+        ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+                     (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+    } else {
+        /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
+        ledctl_blink = hw->ledctl_mode2;
+        for (i=0; i < 4; i++)
+            if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
+                E1000_LEDCTL_MODE_LED_ON)
+                ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
+    }
+
+    E1000_WRITE_REG(hw, LEDCTL, ledctl_blink);
+
+    return E1000_SUCCESS;
+}
+
+/******************************************************************************
  * Restores the saved state of the SW controlable LED.
  *
  * hw - Struct containing variables accessed by shared code
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 467c9ed..941b47d 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -401,6 +401,7 @@ int32_t e1000_setup_led(struct e1000_hw 
 int32_t e1000_cleanup_led(struct e1000_hw *hw);
 int32_t e1000_led_on(struct e1000_hw *hw);
 int32_t e1000_led_off(struct e1000_hw *hw);
+int32_t e1000_blink_led_start(struct e1000_hw *hw);
 
 /* Adaptive IFS Functions */
 



--
Auke Kok <auke-jan.h.kok@intel.com>

  parent reply	other threads:[~2006-06-22  5:14 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-22  5:18 [PATCH 00/21] e1000: driver update to 7.1.9-k2 Kok, Auke
2006-06-22  5:20 ` [PATCH 01/21] e1000: fix loopback ethtool test Kok, Auke
2006-06-22  5:20 ` [PATCH 02/21] e1000: rework driver hardware reset locking Kok, Auke
2006-06-27  1:42   ` Jeff Garzik
2006-06-27 14:42     ` Auke Kok
2006-06-22  5:20 ` [PATCH 03/21] e1000: Make PHY powerup/down a function Kok, Auke
2006-06-22  5:20 ` [PATCH 04/21] e1000: fix CONFIG_PM blocks Kok, Auke
2006-06-22  5:20 ` [PATCH 05/21] e1000: small performance tweak by removing double code Kok, Auke
2006-06-22  5:20 ` [PATCH 06/21] e1000: add smart power down code Kok, Auke
2006-06-27  1:43   ` Jeff Garzik
2006-06-27  8:49     ` Florian Reitmeir
2006-06-27 14:40     ` Auke Kok
2006-06-22  5:20 ` [PATCH 07/21] e1000: change printk into DPRINTK Kok, Auke
2006-06-22  5:20 ` [PATCH 08/21] e1000: recycle skb Kok, Auke
2006-06-22  5:20 ` [PATCH 09/21] e1000: rework module param code with uninitialized values Kok, Auke
2006-06-22  5:20 ` [PATCH 10/21] e1000: force register write flushes to circumvent broken platforms Kok, Auke
2006-06-27  1:47   ` Jeff Garzik
2006-06-27 14:36     ` Auke Kok
2006-06-27 15:41       ` Jeff Garzik
2006-06-27 15:56       ` Auke Kok
2006-06-22  5:20 ` [PATCH 11/21] e1000: disable CRC stripping workaround Kok, Auke
2006-06-22  5:31   ` Ben Greear
2006-06-22 15:36     ` Auke Kok
2006-06-22 15:39     ` Jesse Brandeburg
2006-06-22 15:55       ` Ben Greear
2006-06-22 16:01         ` Jesse Brandeburg
2006-06-22 15:57       ` Lennert Buytenhek
2006-06-27  1:48   ` Jeff Garzik
2006-06-27 14:29     ` Auke Kok
2006-06-22  5:20 ` Kok, Auke [this message]
2006-06-22  5:20 ` [PATCH 13/21] e1000: add E1000_BIG_ENDIAN symbol Kok, Auke
2006-06-27  1:49   ` Jeff Garzik
2006-06-27 14:25     ` Auke Kok
2006-06-22  5:20 ` [PATCH 14/21] e1000: M88 PHY workaround Kok, Auke
2006-06-22  5:20 ` [PATCH 15/21] e1000: check return value of _get_speed_and_duplex Kok, Auke
2006-06-22  5:20 ` [PATCH 16/21] e1000: disable ERT Kok, Auke
2006-06-22  5:20 ` [PATCH 17/21] e1000: add ich8lan core functions Kok, Auke
2006-06-27  1:52   ` Jeff Garzik
2006-06-27 16:12     ` Auke Kok
2006-06-22  5:20 ` [PATCH 18/21] e1000: integrate ich8 support into driver Kok, Auke
2006-06-27  1:54   ` Jeff Garzik
2006-06-22  5:20 ` [PATCH 19/21] e1000: allow user to disable ich8 lock loss workaround Kok, Auke
2006-06-27  1:55   ` Jeff Garzik
2006-06-27 14:21     ` Auke Kok
2006-06-22  5:20 ` [PATCH 20/21] e1000: add ich8lan device ID's Kok, Auke
2006-06-22  5:20 ` [PATCH 21/21] e1000: increase version to 7.1.9-k2 Kok, Auke
2006-06-27 22:48 ` [PATCH 00/21] e1000: driver update " Auke Kok

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060622052032.25497.4540.stgit@gitlost.site \
    --to=auke-jan.h.kok@intel.com \
    --cc=auke@foo-projects.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=jgarzik@pobox.com \
    --cc=john.ronciak@intel.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.