All of lore.kernel.org
 help / color / mirror / Atom feed
From: Keith Mannthey <kmannth@us.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@osdl.org, discuss@x86-64.org,
	Keith Mannthey <kmannth@us.ibm.com>,
	ak@suse.de, lhms-devel@lists.sourceforge.net,
	kamezawa.hiroyu@jp.fujitsu.com
Subject: [PATCH 7/10] hot-add-mem x86_64: x86_64 kernel mapping fix
Date: Fri, 4 Aug 2006 07:14:27 -0600	[thread overview]
Message-ID: <20060804131427.21401.22299.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20060804131351.21401.4877.sendpatchset@localhost.localdomain>

From: Keith Mannthey <kmannth@us.ibm.com>

  Fix for the x86_64 kernel mapping code.  Without this patch the update path
only inits one pmd_page worth of memory and tramples any entries on it. 
now the calling convention to phys_pmd_init and phys_init is to always
pass a [pmd/pud] page not an offset within a page. 

Signed-off-by: Keith Mannthey<kmannth@us.ibm.com>
---
 init.c |   51 ++++++++++++++++++++++++++-------------------------
 1 files changed, 26 insertions(+), 25 deletions(-)

diff -urN linux-2.6.17-stock/arch/x86_64/mm/init.c linux-2.6.17/arch/x86_64/mm/init.c
--- linux-2.6.17-stock/arch/x86_64/mm/init.c	2006-08-04 08:01:57.000000000 -0400
+++ linux-2.6.17/arch/x86_64/mm/init.c	2006-08-04 08:01:01.000000000 -0400
@@ -250,12 +250,13 @@
 }
 
 static void __meminit
-phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end)
+phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end)
 {
-	int i;
+	int i = pmd_index(address);
 
-	for (i = 0; i < PTRS_PER_PMD; pmd++, i++, address += PMD_SIZE) {
+	for (; i < PTRS_PER_PMD; i++, address += PMD_SIZE) {
 		unsigned long entry;
+		pmd_t *pmd = pmd_page + pmd_index(address);
 
 		if (address >= end) {
 			if (!after_bootmem)
@@ -263,6 +264,10 @@
 					set_pmd(pmd, __pmd(0));
 			break;
 		}
+		
+		if (pmd_val(*pmd))
+			continue;
+ 
 		entry = _PAGE_NX|_PAGE_PSE|_KERNPG_TABLE|_PAGE_GLOBAL|address;
 		entry &= __supported_pte_mask;
 		set_pmd(pmd, __pmd(entry));
@@ -272,45 +277,41 @@
 static void __meminit
 phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end)
 {
-	pmd_t *pmd = pmd_offset(pud, (unsigned long)__va(address));
-
-	if (pmd_none(*pmd)) {
-		spin_lock(&init_mm.page_table_lock);
-		phys_pmd_init(pmd, address, end);
-		spin_unlock(&init_mm.page_table_lock);
-		__flush_tlb_all();
-	}
+	pmd_t *pmd = pmd_offset(pud,0);
+	spin_lock(&init_mm.page_table_lock);
+	phys_pmd_init(pmd, address, end);
+	spin_unlock(&init_mm.page_table_lock);
+	__flush_tlb_all();
 }
 
-static void __meminit phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
+static void __meminit phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
 { 
-	long i = pud_index(address);
+	int i = pud_index(addr);
 
-	pud = pud + i;
 
-	if (after_bootmem && pud_val(*pud)) {
-		phys_pmd_update(pud, address, end);
-		return;
-	}
-
-	for (; i < PTRS_PER_PUD; pud++, i++) {
+	for (; i < PTRS_PER_PUD; i++, addr = (addr & PUD_MASK) + PUD_SIZE ) {
 		int map; 
-		unsigned long paddr, pmd_phys;
+		unsigned long pmd_phys;
+		pud_t *pud = pud_page + pud_index(addr);
 		pmd_t *pmd;
 
-		paddr = (address & PGDIR_MASK) + i*PUD_SIZE;
-		if (paddr >= end)
+		if (addr >= end)
 			break;
 
-		if (!after_bootmem && !e820_any_mapped(paddr, paddr+PUD_SIZE, 0)) {
+		if (!after_bootmem && !e820_any_mapped(addr,addr+PUD_SIZE,0)) {
 			set_pud(pud, __pud(0)); 
 			continue;
 		} 
 
+		if (pud_val(*pud)) {
+			phys_pmd_update(pud, addr, end);
+			continue;
+		}
+
 		pmd = alloc_low_page(&map, &pmd_phys);
 		spin_lock(&init_mm.page_table_lock);
 		set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE));
-		phys_pmd_init(pmd, paddr, end);
+		phys_pmd_init(pmd, addr, end);
 		spin_unlock(&init_mm.page_table_lock);
 		unmap_low_page(map);
 	}

  parent reply	other threads:[~2006-08-04 13:16 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-08-04 13:13 [PATCH 1/10] hot-add-mem x86_64: acpi motherboard fix Keith Mannthey
2006-08-04 13:13 ` [PATCH 2/10] hot-add-mem x86_64: fixup externs Keith Mannthey
2006-08-04 13:14 ` [PATCH 3/10] hot-add-mem x86_64: Kconfig changes Keith Mannthey
2006-08-04 13:14 ` [PATCH 4/10] hot-add-mem x86_64: Enable SPARSEMEM in srat.c Keith Mannthey
2006-08-04 15:17   ` [Lhms-devel] " Mika Penttilä
2006-08-04 19:36     ` keith mannthey
2006-08-04 17:42   ` Dave Hansen
2006-08-04 13:14 ` [PATCH 5/10] hot-add-mem x86_64: memory_add_physaddr_to_nid enable Keith Mannthey
2006-08-04 13:14 ` Keith Mannthey [this message]
2006-08-04 13:14 ` [PATCH 8/10] hot-add-mem x86_64: use CONFIG_MEMORY_HOTPLUG_SPARSE Keith Mannthey
2006-08-04 13:14 ` [PATCH 9/10] hot-add-mem x86_64: use CONFIG_MEMORY_HOTPLUG_RESERVE Keith Mannthey
2006-08-07 17:41   ` keith mannthey
2006-08-04 13:14 ` [PATCH 10/10] hot-add-mem x86_64: valid add range check Keith Mannthey
2006-08-05  5:39 ` [PATCH 1/10] hot-add-mem x86_64: acpi motherboard fix KAMEZAWA Hiroyuki
2006-08-05  5:51 ` KAMEZAWA Hiroyuki
2006-08-07 18:39   ` keith mannthey
2006-08-08  0:31     ` [Lhms-devel] " KAMEZAWA Hiroyuki
2006-08-08  0:56       ` keith mannthey
2006-08-08  2:08         ` KAMEZAWA Hiroyuki
2006-08-08  2:15           ` keith mannthey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060804131427.21401.22299.sendpatchset@localhost.localdomain \
    --to=kmannth@us.ibm.com \
    --cc=ak@suse.de \
    --cc=akpm@osdl.org \
    --cc=discuss@x86-64.org \
    --cc=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=lhms-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.