From: Dan Williams <dan.j.williams@intel.com>
To: neilb@suse.de, linux-raid@vger.kernel.org
Cc: akpm@osdl.org, linux-kernel@vger.kernel.org, christopher.leech@intel.com
Subject: [PATCH 07/19] raid5: remove compute_block and compute_parity5
Date: Mon, 11 Sep 2006 16:18:12 -0700 [thread overview]
Message-ID: <20060911231812.4737.28768.stgit@dwillia2-linux.ch.intel.com> (raw)
In-Reply-To: <1158015632.4241.31.camel@dwillia2-linux.ch.intel.com>
From: Dan Williams <dan.j.williams@intel.com>
replaced by the workqueue implementation
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/md/raid5.c | 123 ----------------------------------------------------
1 files changed, 0 insertions(+), 123 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index a07b52b..ad6883b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -964,129 +964,6 @@ #define check_xor() do { \
} while(0)
-static void compute_block(struct stripe_head *sh, int dd_idx)
-{
- int i, count, disks = sh->disks;
- void *ptr[MAX_XOR_BLOCKS], *p;
-
- PRINTK("compute_block, stripe %llu, idx %d\n",
- (unsigned long long)sh->sector, dd_idx);
-
- ptr[0] = page_address(sh->dev[dd_idx].page);
- memset(ptr[0], 0, STRIPE_SIZE);
- count = 1;
- for (i = disks ; i--; ) {
- if (i == dd_idx)
- continue;
- p = page_address(sh->dev[i].page);
- if (test_bit(R5_UPTODATE, &sh->dev[i].flags))
- ptr[count++] = p;
- else
- printk(KERN_ERR "compute_block() %d, stripe %llu, %d"
- " not present\n", dd_idx,
- (unsigned long long)sh->sector, i);
-
- check_xor();
- }
- if (count != 1)
- xor_block(count, STRIPE_SIZE, ptr);
- set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
-}
-
-static void compute_parity5(struct stripe_head *sh, int method)
-{
- raid5_conf_t *conf = sh->raid_conf;
- int i, pd_idx = sh->pd_idx, disks = sh->disks, count;
- void *ptr[MAX_XOR_BLOCKS];
- struct bio *chosen;
-
- PRINTK("compute_parity5, stripe %llu, method %d\n",
- (unsigned long long)sh->sector, method);
-
- count = 1;
- ptr[0] = page_address(sh->dev[pd_idx].page);
- switch(method) {
- case READ_MODIFY_WRITE:
- BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags));
- for (i=disks ; i-- ;) {
- if (i==pd_idx)
- continue;
- if (sh->dev[i].towrite &&
- test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
- ptr[count++] = page_address(sh->dev[i].page);
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- check_xor();
- }
- }
- break;
- case RECONSTRUCT_WRITE:
- memset(ptr[0], 0, STRIPE_SIZE);
- for (i= disks; i-- ;)
- if (i!=pd_idx && sh->dev[i].towrite) {
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- }
- break;
- case CHECK_PARITY:
- break;
- }
- if (count>1) {
- xor_block(count, STRIPE_SIZE, ptr);
- count = 1;
- }
-
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- sector_t sector = sh->dev[i].sector;
- struct bio *wbi = sh->dev[i].written;
- while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) {
- copy_data(1, wbi, sh->dev[i].page, sector);
- wbi = r5_next_bio(wbi, sector);
- }
-
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(R5_UPTODATE, &sh->dev[i].flags);
- }
-
- switch(method) {
- case RECONSTRUCT_WRITE:
- case CHECK_PARITY:
- for (i=disks; i--;)
- if (i != pd_idx) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- break;
- case READ_MODIFY_WRITE:
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- }
- if (count != 1)
- xor_block(count, STRIPE_SIZE, ptr);
-
- if (method != CHECK_PARITY) {
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
- } else
- clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
-}
-
static void compute_parity6(struct stripe_head *sh, int method)
{
raid6_conf_t *conf = sh->raid_conf;
next prev parent reply other threads:[~2006-09-11 23:18 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-11 23:00 [PATCH 00/19] Hardware Accelerated MD RAID5: Introduction Dan Williams
2006-09-11 23:00 ` Dan Williams
2006-09-11 23:17 ` [PATCH 01/19] raid5: raid5_do_soft_block_ops Dan Williams
2006-09-11 23:34 ` Jeff Garzik
2006-09-11 23:17 ` [PATCH 02/19] raid5: move write operations to a workqueue Dan Williams
2006-09-11 23:36 ` Jeff Garzik
2006-09-11 23:17 ` [PATCH 03/19] raid5: move check parity " Dan Williams
2006-09-11 23:17 ` [PATCH 04/19] raid5: move compute block " Dan Williams
2006-09-11 23:18 ` [PATCH 05/19] raid5: move read completion copies " Dan Williams
2006-09-11 23:18 ` [PATCH 06/19] raid5: move the reconstruct write expansion operation " Dan Williams
2006-09-11 23:18 ` Dan Williams [this message]
2006-09-11 23:18 ` [PATCH 08/19] dmaengine: enable multiple clients and operations Dan Williams
2006-09-11 23:44 ` Jeff Garzik
2006-09-12 0:14 ` Dan Williams
2006-09-12 0:52 ` Roland Dreier
2006-09-12 6:18 ` Dan Williams
2006-09-12 9:15 ` Evgeniy Polyakov
2006-09-13 4:04 ` Jeff Garzik
2006-09-15 16:38 ` Olof Johansson
2006-09-15 19:44 ` [PATCH] dmaengine: clean up and abstract function types (was Re: [PATCH 08/19] dmaengine: enable multiple clients and operations) Olof Johansson
2006-09-15 20:02 ` [PATCH] [v2] " Olof Johansson
2006-09-18 22:56 ` [PATCH] " Dan Williams
2006-09-19 1:05 ` Olof Johansson
2006-09-19 11:20 ` Alan Cox
2006-09-19 16:32 ` Olof Johansson
2006-09-11 23:18 ` [PATCH 09/19] dmaengine: reduce backend address permutations Dan Williams
2006-09-15 14:46 ` Olof Johansson
2006-09-11 23:18 ` [PATCH 10/19] dmaengine: expose per channel dma mapping characteristics to clients Dan Williams
2006-09-11 23:18 ` [PATCH 11/19] dmaengine: add memset as an asynchronous dma operation Dan Williams
2006-09-11 23:50 ` Jeff Garzik
2006-09-11 23:18 ` [PATCH 12/19] dmaengine: dma_async_memcpy_err for DMA engines that do not support memcpy Dan Williams
2006-09-11 23:51 ` Jeff Garzik
2006-09-11 23:18 ` [PATCH 13/19] dmaengine: add support for dma xor zero sum operations Dan Williams
2006-09-11 23:18 ` [PATCH 14/19] dmaengine: add dma_sync_wait Dan Williams
2006-09-11 23:52 ` Jeff Garzik
2006-09-11 23:18 ` [PATCH 15/19] dmaengine: raid5 dma client Dan Williams
2006-09-11 23:54 ` Jeff Garzik
2006-09-11 23:19 ` [PATCH 16/19] dmaengine: Driver for the Intel IOP 32x, 33x, and 13xx RAID engines Dan Williams
2006-09-15 14:57 ` Olof Johansson
2006-09-11 23:19 ` [PATCH 17/19] iop3xx: define IOP3XX_REG_ADDR[32|16|8] and clean up DMA/AAU defs Dan Williams
2006-09-11 23:55 ` Jeff Garzik
2006-09-11 23:19 ` [PATCH 18/19] iop3xx: Give Linux control over PCI (ATU) initialization Dan Williams
2006-09-11 23:56 ` Jeff Garzik
2006-09-11 23:19 ` [PATCH 19/19] iop3xx: IOP 32x and 33x support for the iop-adma driver Dan Williams
2006-09-11 23:38 ` [PATCH 00/19] Hardware Accelerated MD RAID5: Introduction Jeff Garzik
2006-09-11 23:38 ` Jeff Garzik
2006-09-11 23:53 ` Dan Williams
2006-09-12 2:41 ` Jeff Garzik
2006-09-12 5:47 ` Dan Williams
2006-09-13 4:05 ` Jeff Garzik
2006-09-13 7:15 ` Jakob Oestergaard
2006-09-13 19:17 ` Dan Williams
2006-09-14 7:42 ` Jakob Oestergaard
2006-10-11 1:46 ` Dan Williams
2006-10-08 22:18 ` Neil Brown
2006-10-10 18:23 ` Dan Williams
2006-10-11 2:44 ` Neil Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060911231812.4737.28768.stgit@dwillia2-linux.ch.intel.com \
--to=dan.j.williams@intel.com \
--cc=akpm@osdl.org \
--cc=christopher.leech@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.