From: malahal@us.ibm.com
To: linux-scsi@vger.kernel.org
Subject: [PATCH 1/2] aic94xx SCSI timeout fix
Date: Wed, 4 Oct 2006 17:28:37 -0700 [thread overview]
Message-ID: <20061005002837.GA21898@us.ibm.com> (raw)
The patch updates DDB0 in the aic94xx driver itself. It doesn't supply
or use lldd_port_formed field. DDB0 is updated prior to posting
notification to libsas layer.
Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
diff -r 445d70ce1ff2 drivers/scsi/aic94xx/aic94xx_hwi.c
--- a/drivers/scsi/aic94xx/aic94xx_hwi.c Wed Oct 04 10:02:16 2006 -0700
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c Wed Oct 04 10:03:57 2006 -0700
@@ -112,6 +112,21 @@ static int asd_init_phy(struct asd_phy *
return 0;
}
+static void asd_init_ports(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ spin_lock_init(&asd_ha->asd_ports_lock);
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ struct asd_port *asd_port = &asd_ha->asd_ports[i];
+
+ memset(asd_port->sas_addr, 0, SAS_ADDR_SIZE);
+ memset(asd_port->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ asd_port->phy_mask = 0;
+ asd_port->num_phys = 0;
+ }
+}
+
static int asd_init_phys(struct asd_ha_struct *asd_ha)
{
u8 i;
@@ -121,6 +136,7 @@ static int asd_init_phys(struct asd_ha_s
struct asd_phy *phy = &asd_ha->phys[i];
phy->phy_desc = &asd_ha->hw_prof.phy_desc[i];
+ phy->asd_port = NULL;
phy->sas_phy.enabled = 0;
phy->sas_phy.id = i;
@@ -657,6 +673,8 @@ int asd_init_hw(struct asd_ha_struct *as
pci_name(asd_ha->pcidev));
goto Out;
}
+
+ asd_init_ports(asd_ha);
err = asd_init_scbs(asd_ha);
if (err) {
diff -r 445d70ce1ff2 drivers/scsi/aic94xx/aic94xx_hwi.h
--- a/drivers/scsi/aic94xx/aic94xx_hwi.h Wed Oct 04 10:02:16 2006 -0700
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.h Wed Oct 04 10:03:57 2006 -0700
@@ -192,6 +192,16 @@ struct asd_seq_data {
struct asd_ascb **escb_arr; /* array of pointers to escbs */
};
+/* This is an internal port structure. These are used to get accurate
+ * phy_mask for updating DDB 0.
+ */
+struct asd_port {
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ u32 phy_mask;
+ int num_phys;
+};
+
/* This is the Host Adapter structure. It describes the hardware
* SAS adapter.
*/
@@ -210,6 +220,8 @@ struct asd_ha_struct {
struct hw_profile hw_prof;
struct asd_phy phys[ASD_MAX_PHYS];
+ spinlock_t asd_ports_lock;
+ struct asd_port asd_ports[ASD_MAX_PHYS];
struct asd_sas_port ports[ASD_MAX_PHYS];
struct dma_pool *scb_pool;
diff -r 445d70ce1ff2 drivers/scsi/aic94xx/aic94xx_init.c
--- a/drivers/scsi/aic94xx/aic94xx_init.c Wed Oct 04 10:02:16 2006 -0700
+++ b/drivers/scsi/aic94xx/aic94xx_init.c Wed Oct 04 10:03:57 2006 -0700
@@ -766,8 +766,6 @@ static void asd_remove_driver_attrs(stru
}
static struct sas_domain_function_template aic94xx_transport_functions = {
- .lldd_port_formed = asd_update_port_links,
-
.lldd_dev_found = asd_dev_found,
.lldd_dev_gone = asd_dev_gone,
diff -r 445d70ce1ff2 drivers/scsi/aic94xx/aic94xx_sas.h
--- a/drivers/scsi/aic94xx/aic94xx_sas.h Wed Oct 04 10:02:16 2006 -0700
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h Wed Oct 04 10:03:57 2006 -0700
@@ -733,6 +733,7 @@ struct asd_phy {
struct sas_identify_frame *identify_frame;
struct asd_dma_tok *id_frm_tok;
+ struct asd_port *asd_port;
u8 frame_rcvd[ASD_EDB_SIZE];
};
diff -r 445d70ce1ff2 drivers/scsi/aic94xx/aic94xx_scb.c
--- a/drivers/scsi/aic94xx/aic94xx_scb.c Wed Oct 04 10:02:16 2006 -0700
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c Wed Oct 04 10:03:57 2006 -0700
@@ -168,6 +168,70 @@ static inline void asd_get_attached_sas_
}
}
+static void asd_form_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
+{
+ int i;
+ struct asd_port *free_port = NULL;
+ struct asd_port *port;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->asd_ports_lock, flags);
+ if (!phy->asd_port) {
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ port = &asd_ha->asd_ports[i];
+
+ /* Check for wide port */
+ if (port->num_phys > 0 &&
+ memcmp(port->sas_addr, sas_phy->sas_addr,
+ SAS_ADDR_SIZE) == 0 &&
+ memcmp(port->attached_sas_addr,
+ sas_phy->attached_sas_addr,
+ SAS_ADDR_SIZE) == 0) {
+ break;
+ }
+
+ /* Find a free port */
+ if (port->num_phys == 0 && free_port == NULL) {
+ free_port = port;
+ }
+ }
+
+ /* Use a free port if this doesn't form a wide port */
+ if (i >= ASD_MAX_PHYS) {
+ port = free_port;
+ BUG_ON(!port);
+ memcpy(port->sas_addr, sas_phy->sas_addr,
+ SAS_ADDR_SIZE);
+ memcpy(port->attached_sas_addr,
+ sas_phy->attached_sas_addr,
+ SAS_ADDR_SIZE);
+ }
+ port->num_phys++;
+ port->phy_mask |= (1U << sas_phy->id);
+ phy->asd_port = port;
+ }
+ ASD_DPRINTK("%s: updating phy_mask 0x%x for phy%d\n",
+ __FUNCTION__, phy->asd_port->phy_mask, sas_phy->id);
+ asd_update_port_links(asd_ha, phy);
+ spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
+}
+
+static void asd_deform_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
+{
+ struct asd_port *port = phy->asd_port;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->asd_ports_lock, flags);
+ if (port) {
+ port->num_phys--;
+ port->phy_mask &= ~(1U << sas_phy->id);
+ phy->asd_port = NULL;
+ }
+ spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
+}
+
static inline void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
struct done_list_struct *dl,
int edb_id, int phy_id)
@@ -187,6 +251,7 @@ static inline void asd_bytes_dmaed_taskl
asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
asd_dump_frame_rcvd(phy, dl);
+ asd_form_port(ascb->ha, phy);
sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
}
@@ -197,6 +262,7 @@ static inline void asd_link_reset_err_ta
struct asd_ha_struct *asd_ha = ascb->ha;
struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
u8 lr_error = dl->status_block[1];
u8 retries_left = dl->status_block[2];
@@ -221,6 +287,7 @@ static inline void asd_link_reset_err_ta
asd_turn_led(asd_ha, phy_id, 0);
sas_phy_disconnected(sas_phy);
+ asd_deform_port(asd_ha, phy);
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
if (retries_left == 0) {
@@ -248,6 +315,8 @@ static inline void asd_primitive_rcvd_ta
unsigned long flags;
struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha;
struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
u8 reg = dl->status_block[1];
u32 cont = dl->status_block[2] << ((reg & 3)*8);
@@ -284,6 +353,7 @@ static inline void asd_primitive_rcvd_ta
phy_id);
/* The sequencer disables all phys on that port.
* We have to re-enable the phys ourselves. */
+ asd_deform_port(asd_ha, phy);
sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
break;
@@ -351,6 +421,7 @@ static void escb_tasklet_complete(struct
u8 sb_opcode = dl->status_block[0];
int phy_id = sb_opcode & DL_PHY_MASK;
struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
if (edb > 6 || edb < 0) {
ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
@@ -395,6 +466,7 @@ static void escb_tasklet_complete(struct
asd_turn_led(asd_ha, phy_id, 0);
/* the device is gone */
sas_phy_disconnected(sas_phy);
+ asd_deform_port(asd_ha, phy);
sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
break;
case REQ_TASK_ABORT:
diff -r 445d70ce1ff2 drivers/scsi/aic94xx/aic94xx_seq.c
--- a/drivers/scsi/aic94xx/aic94xx_seq.c Wed Oct 04 10:02:16 2006 -0700
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c Wed Oct 04 10:03:57 2006 -0700
@@ -1369,10 +1369,9 @@ int asd_start_seqs(struct asd_ha_struct
* port_map_by_links is also used as the conn_mask byte in the
* initiator/target port DDB.
*/
-void asd_update_port_links(struct asd_sas_phy *sas_phy)
-{
- struct asd_ha_struct *asd_ha = sas_phy->ha->lldd_ha;
- const u8 phy_mask = (u8) sas_phy->port->phy_mask;
+void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
+{
+ const u8 phy_mask = (u8) phy->asd_port->phy_mask;
u8 phy_is_up;
u8 mask;
int i, err;
diff -r 445d70ce1ff2 drivers/scsi/aic94xx/aic94xx_seq.h
--- a/drivers/scsi/aic94xx/aic94xx_seq.h Wed Oct 04 10:02:16 2006 -0700
+++ b/drivers/scsi/aic94xx/aic94xx_seq.h Wed Oct 04 10:03:57 2006 -0700
@@ -64,7 +64,7 @@ int asd_init_seqs(struct asd_ha_struct *
int asd_init_seqs(struct asd_ha_struct *asd_ha);
int asd_start_seqs(struct asd_ha_struct *asd_ha);
-void asd_update_port_links(struct asd_sas_phy *phy);
+void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy);
#endif
#endif
next reply other threads:[~2006-10-05 0:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-05 0:28 malahal [this message]
2006-10-05 0:34 ` [PATCH 2/2] aic94xx SCSI timeout fix: SMP retry fix malahal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061005002837.GA21898@us.ibm.com \
--to=malahal@us.ibm.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.