* Recurring MegaRAID SCSI Errors
@ 2006-10-19 22:09 Joshua Schmidlkofer
2006-10-19 22:11 ` Joshua Schmidlkofer
2006-10-19 22:26 ` Matt Domsch
0 siblings, 2 replies; 9+ messages in thread
From: Joshua Schmidlkofer @ 2006-10-19 22:09 UTC (permalink / raw)
To: linux-kernel
We are getting errors from a MegaRAID device. We have been able to
semi-consistently reproduce this by copying large files to the network.
This is a Dell PowerEdge 1800.
We have replaced everything in the system.
- 2 New RAID Cards.
- New Memory
- New Motherboard
- New case.
We are currently running 2.6.17.7 - we have been upgrading slowly.
First due to problems with the RAID that were fixed in 15 or 16, second,
the numerous special XFS fixes that have been needed.
I have no idea why this is happening, and could really use some guidance.
Dell is fast running out of suggestions. No errors except what the
kernel reports are being found.
sincerely,
joshua
02:05.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01)
02:05.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01)
Subsystem: Dell MegaRAID 518 DELL PERC 4/DC RAID Controller
Flags: bus master, 66Mhz, slow devsel, latency 32, IRQ 185
Memory at f80f0000 (32-bit, prefetchable) [size=64K]
Expansion ROM at fea00000 [disabled] [size=64K]
Capabilities: [80] Power Management version 2
[Snip]
[17333187.152000] megaraid: aborting-6172683 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: scsi cmd:6172683, do now own
[17333187.152000] megaraid: aborting-6172684 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: scsi cmd:6172684, do now own
[17333187.152000] megaraid: aborting-6172685 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172685:49[255:129], fw owner
[17333187.152000] megaraid: aborting-6172686 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172686:112[255:129], fw owner
[17333187.152000] megaraid: aborting-6172687 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172687:35[255:129], fw owner
[17333187.152000] megaraid: aborting-6172688 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172688:37[255:129], fw owner
[17333187.152000] megaraid: aborting-6172690 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172690:90[255:129], fw owner
[17333187.152000] megaraid: aborting-6172691 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172691:72[255:129], fw owner
[17333187.152000] megaraid: aborting-6172693 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172693:57[255:129], fw owner
[17333187.152000] megaraid: aborting-6172695 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172695:116[255:129], fw owner
[17333187.152000] megaraid: aborting-6172708 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172708:38[255:129], fw owner
[17333187.152000] megaraid: aborting-6172709 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172709:79[255:129], fw owner
[17333187.152000] megaraid: aborting-6172710 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172710:58[255:129], fw owner
[17333187.152000] megaraid: aborting-6172711 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172711:52[255:129], fw owner
[17333187.152000] megaraid: aborting-6172712 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172712:75[255:129], fw owner
[17333187.152000] megaraid: aborting-6172713 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172713:23[255:129], fw owner
[17333187.152000] megaraid: aborting-6172714 cmd=2a <c=2 t=1 l=0>
[17333187.152000] megaraid abort: 6172714:124[255:129], fw owner
[17333187.152000] megaraid: 15 outstanding commands. Max wait 300 sec
[17333187.152000] megaraid mbox: Wait for 15 commands to complete:300
[17333192.172000] megaraid mbox: Wait for 10 commands to complete:295
[17333197.192000] megaraid mbox: Wait for 3 commands to complete:290
[17333199.200000] megaraid mbox: reset sequence completed sucessfully
[17333237.288000] megaraid: aborting-6173089 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: scsi cmd:6173089, do now own
[17333237.288000] megaraid: aborting-6173090 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: scsi cmd:6173090, do now own
[17333237.288000] megaraid: aborting-6173091 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: scsi cmd:6173091, do now own
[17333237.288000] megaraid: aborting-6173092 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: scsi cmd:6173092, do now own
[17333237.288000] megaraid: aborting-6173093 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: scsi cmd:6173093, do now own
[17333237.288000] megaraid: aborting-6173094 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: scsi cmd:6173094, do now own
[17333237.288000] megaraid: aborting-6173095 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: scsi cmd:6173095, do now own
[17333237.288000] megaraid: aborting-6173096 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: scsi cmd:6173096, do now own
[17333237.288000] megaraid: aborting-6173098 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173098:90[255:129], fw owner
[17333237.288000] megaraid: aborting-6173099 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173099:120[255:129], fw owner
[17333237.288000] megaraid: aborting-6173103 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173103:49[255:129], fw owner
[17333237.288000] megaraid: aborting-6173116 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173116:97[255:129], fw owner
[17333237.288000] megaraid: aborting-6173117 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173117:62[255:129], fw owner
[17333237.288000] megaraid: aborting-6173118 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173118:77[255:129], fw owner
[17333237.288000] megaraid: aborting-6173119 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173119:94[255:129], fw owner
[17333237.288000] megaraid: aborting-6173126 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173126:72[255:129], fw owner
[17333237.288000] megaraid: aborting-6173127 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173127:115[255:129], fw owner
[17333237.288000] megaraid: aborting-6173128 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173128:61[255:129], fw owner
[17333237.288000] megaraid: aborting-6173129 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173129:57[255:129], fw owner
[17333237.288000] megaraid: aborting-6173139 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173139:79[255:129], fw owner
[17333237.288000] megaraid: aborting-6173140 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173140:38[255:129], fw owner
[17333237.288000] megaraid: aborting-6173142 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173142:116[255:129], fw owner
[17333237.288000] megaraid: aborting-6173144 cmd=2a <c=2 t=1 l=0>
[17333237.288000] megaraid abort: 6173144:76[255:129], fw owner
[17333237.288000] megaraid: 15 outstanding commands. Max wait 300 sec
[17333237.288000] megaraid mbox: Wait for 15 commands to complete:300
[17333242.308000] megaraid mbox: Wait for 10 commands to complete:295
[17333247.328000] megaraid mbox: Wait for 3 commands to complete:290
[17333249.336000] megaraid mbox: reset sequence completed sucessfully
[17333310.648000] megaraid: aborting-6173544 cmd=2a <c=2 t=1 l=0>
[17333310.648000] megaraid abort: scsi cmd:6173544, do now own
[17333310.648000] megaraid: aborting-6173545 cmd=2a <c=2 t=1 l=0>
[17333310.648000] megaraid abort: scsi cmd:6173545, do now own
[17333310.648000] megaraid: aborting-6173546 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173546, do now own
[17333310.652000] megaraid: aborting-6173547 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173547, do now own
[17333310.652000] megaraid: aborting-6173563 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173563, do now own
[17333310.652000] megaraid: aborting-6173564 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173564, do now own
[17333310.652000] megaraid: aborting-6173565 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173565, do now own
[17333310.652000] megaraid: aborting-6173566 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173566, do now own
[17333310.652000] megaraid: aborting-6173567 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173567, do now own
[17333310.652000] megaraid: aborting-6173568 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173568, do now own
[17333310.652000] megaraid: aborting-6173569 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173569, do now own
[17333310.652000] megaraid: aborting-6173578 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173578, do now own
[17333310.652000] megaraid: aborting-6173579 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173579, do now own
[17333310.652000] megaraid: aborting-6173580 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173580, do now own
[17333310.652000] megaraid: aborting-6173583 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173583, do now own
[17333310.652000] megaraid: aborting-6173598 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173598, do now own
[17333310.652000] megaraid: aborting-6173599 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173599, do now own
[17333310.652000] megaraid: aborting-6173600 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173600, do now own
[17333310.652000] megaraid: aborting-6173601 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173601, do now own
[17333310.652000] megaraid: aborting-6173602 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173602, do now own
[17333310.652000] megaraid: aborting-6173603 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173603, do now own
[17333310.652000] megaraid: aborting-6173604 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173604, do now own
[17333310.652000] megaraid: aborting-6173605 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173605, do now own
[17333310.652000] megaraid: aborting-6173633 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173633, do now own
[17333310.652000] megaraid: aborting-6173638 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173638, do now own
[17333310.652000] megaraid: aborting-6173639 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173639, do now own
[17333310.652000] megaraid: aborting-6173640 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173640, do now own
[17333310.652000] megaraid: aborting-6173662 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173662, do now own
[17333310.652000] megaraid: aborting-6173663 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173663, do now own
[17333310.652000] megaraid: aborting-6173664 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173664, do now own
[17333310.652000] megaraid: aborting-6173665 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173665, do now own
[17333310.652000] megaraid: aborting-6173675 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173675, do now own
[17333310.652000] megaraid: aborting-6173677 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173677, do now own
[17333310.652000] megaraid: aborting-6173678 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173678, do now own
[17333310.652000] megaraid: aborting-6173679 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173679, do now own
[17333310.652000] megaraid: aborting-6173685 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173685, do now own
[17333310.652000] megaraid: aborting-6173686 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173686, do now own
[17333310.652000] megaraid: aborting-6173687 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173687, do now own
[17333310.652000] megaraid: aborting-6173688 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173688, do now own
[17333310.652000] megaraid: aborting-6173699 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173699, do now own
[17333310.652000] megaraid: aborting-6173700 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173700, do now own
[17333310.652000] megaraid: aborting-6173701 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: scsi cmd:6173701, do now own
[17333310.652000] megaraid: aborting-6173702 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173702:112[255:129], fw owner
[17333310.652000] megaraid: aborting-6173712 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173712:25[255:129], fw owner
[17333310.652000] megaraid: aborting-6173713 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173713:92[255:129], fw owner
[17333310.652000] megaraid: aborting-6173717 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173717:31[255:129], fw owner
[17333310.652000] megaraid: aborting-6173718 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173718:54[255:129], fw owner
[17333310.652000] megaraid: aborting-6173722 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173722:124[255:129], fw owner
[17333310.652000] megaraid: aborting-6173723 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173723:56[255:129], fw owner
[17333310.652000] megaraid: aborting-6173728 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173728:107[255:129], fw owner
[17333310.652000] megaraid: aborting-6173733 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173733:8[255:129], fw owner
[17333310.652000] megaraid: aborting-6173736 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173736:98[255:129], fw owner
[17333310.652000] megaraid: aborting-6173737 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173737:33[255:129], fw owner
[17333310.652000] megaraid: aborting-6173738 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173738:1[255:129], fw owner
[17333310.652000] megaraid: aborting-6173743 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173743:10[255:129], fw owner
[17333310.652000] megaraid: aborting-6173759 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173759:21[255:129], fw owner
[17333310.652000] megaraid: aborting-6173760 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173760:5[255:129], fw owner
[17333310.652000] megaraid: aborting-6173769 cmd=2a <c=2 t=1 l=0>
[17333310.652000] megaraid abort: 6173769:127[255:129], fw owner
[17333310.652000] megaraid: 16 outstanding commands. Max wait 300 sec
[17333310.652000] megaraid mbox: Wait for 16 commands to complete:300
[17333315.672000] megaraid mbox: Wait for 10 commands to complete:295
[17333320.692000] megaraid mbox: Wait for 2 commands to complete:290
[17333321.696000] megaraid mbox: reset sequence completed sucessfully
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Recurring MegaRAID SCSI Errors
2006-10-19 22:09 Recurring MegaRAID SCSI Errors Joshua Schmidlkofer
@ 2006-10-19 22:11 ` Joshua Schmidlkofer
2006-10-19 22:26 ` Matt Domsch
1 sibling, 0 replies; 9+ messages in thread
From: Joshua Schmidlkofer @ 2006-10-19 22:11 UTC (permalink / raw)
To: linux-kernel
p.s. I am not on the list, so please include me in the reply.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Recurring MegaRAID SCSI Errors
2006-10-19 22:09 Recurring MegaRAID SCSI Errors Joshua Schmidlkofer
2006-10-19 22:11 ` Joshua Schmidlkofer
@ 2006-10-19 22:26 ` Matt Domsch
2006-10-19 22:37 ` Joshua Schmidlkofer
1 sibling, 1 reply; 9+ messages in thread
From: Matt Domsch @ 2006-10-19 22:26 UTC (permalink / raw)
To: Joshua Schmidlkofer; +Cc: linux-kernel
On Thu, Oct 19, 2006 at 03:09:46PM -0700, Joshua Schmidlkofer wrote:
> We are getting errors from a MegaRAID device. We have been able to
> semi-consistently reproduce this by copying large files to the network.
> This is a Dell PowerEdge 1800.
>
> We have replaced everything in the system.
> - 2 New RAID Cards.
> - New Memory
> - New Motherboard
> - New case.
>
> We are currently running 2.6.17.7 - we have been upgrading slowly.
> First due to problems with the RAID that were fixed in 15 or 16, second,
> the numerous special XFS fixes that have been needed.
>
> I have no idea why this is happening, and could really use some guidance.
>
> Dell is fast running out of suggestions. No errors except what the
> kernel reports are being found.
Most likely you need this patch:
http://marc.theaimsgroup.com/?l=linux-scsi&m=115992186113515&w=2
Thanks,
Matt
--
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: Recurring MegaRAID SCSI Errors
@ 2006-10-20 12:41 Ju, Seokmann
2006-10-20 13:53 ` Joshua Schmidlkofer
0 siblings, 1 reply; 9+ messages in thread
From: Ju, Seokmann @ 2006-10-20 12:41 UTC (permalink / raw)
To: Andrew Morton, linux-scsi; +Cc: Joshua Schmidlkofer
Hi,
> [17333187.152000] megaraid: aborting-6172714 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172714:124[255:129], fw owner
> [17333187.152000] megaraid: 15 outstanding commands. Max wait 300 sec
> [17333187.152000] megaraid mbox: Wait for 15 commands to complete:300
> [17333192.172000] megaraid mbox: Wait for 10 commands to complete:295
> [17333197.192000] megaraid mbox: Wait for 3 commands to complete:290
> [17333199.200000] megaraid mbox: reset sequence completed sucessfully
Above messages indicate that,
- there are commands (mostly WRITE(10)) pending in MegaRAID F/W taking longer than given timeout period.
- After driver waitinf for 10 seconds, all of those commands had been returned successfully.
- So, the driver returned back to normal operation.
There is NO data loss/integrity error related to this messages as driver returned back to normal successfully.
Howerver, to get rid of those messages, I would like to ask you to check and upgrade F/W image on the controllers, first.
Thank you,
Seokmann
> -----Original Message-----
> From: Andrew Morton [mailto:akpm@osdl.org]
> Sent: Thursday, October 19, 2006 10:47 PM
> To: linux-scsi@vger.kernel.org
> Cc: Joshua Schmidlkofer; Ju, Seokmann
> Subject: Fw: Recurring MegaRAID SCSI Errors
>
>
>
> Begin forwarded message:
>
> Date: Thu, 19 Oct 2006 15:09:46 -0700
> From: Joshua Schmidlkofer <joshua@imrlive.com>
> To: linux-kernel@vger.kernel.org
> Subject: Recurring MegaRAID SCSI Errors
>
>
> We are getting errors from a MegaRAID device. We have been able to
> semi-consistently reproduce this by copying large files to
> the network.
> This is a Dell PowerEdge 1800.
>
> We have replaced everything in the system.
> - 2 New RAID Cards.
> - New Memory
> - New Motherboard
> - New case.
>
> We are currently running 2.6.17.7 - we have been upgrading slowly.
> First due to problems with the RAID that were fixed in 15 or
> 16, second,
> the numerous special XFS fixes that have been needed.
>
> I have no idea why this is happening, and could really use
> some guidance.
>
> Dell is fast running out of suggestions. No errors except what the
> kernel reports are being found.
>
> sincerely,
> joshua
>
>
> 02:05.0 RAID bus controller: LSI Logic / Symbios Logic
> MegaRAID (rev 01)
>
> 02:05.0 RAID bus controller: LSI Logic / Symbios Logic
> MegaRAID (rev 01)
> Subsystem: Dell MegaRAID 518 DELL PERC 4/DC RAID Controller
> Flags: bus master, 66Mhz, slow devsel, latency 32, IRQ 185
> Memory at f80f0000 (32-bit, prefetchable) [size=64K]
> Expansion ROM at fea00000 [disabled] [size=64K]
> Capabilities: [80] Power Management version 2
>
> [Snip]
>
> [17333187.152000] megaraid: aborting-6172683 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: scsi cmd:6172683, do now own
> [17333187.152000] megaraid: aborting-6172684 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: scsi cmd:6172684, do now own
> [17333187.152000] megaraid: aborting-6172685 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172685:49[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172686 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172686:112[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172687 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172687:35[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172688 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172688:37[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172690 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172690:90[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172691 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172691:72[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172693 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172693:57[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172695 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172695:116[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172708 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172708:38[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172709 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172709:79[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172710 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172710:58[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172711 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172711:52[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172712 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172712:75[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172713 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172713:23[255:129], fw owner
> [17333187.152000] megaraid: aborting-6172714 cmd=2a <c=2 t=1 l=0>
> [17333187.152000] megaraid abort: 6172714:124[255:129], fw owner
> [17333187.152000] megaraid: 15 outstanding commands. Max wait 300 sec
> [17333187.152000] megaraid mbox: Wait for 15 commands to complete:300
> [17333192.172000] megaraid mbox: Wait for 10 commands to complete:295
> [17333197.192000] megaraid mbox: Wait for 3 commands to complete:290
> [17333199.200000] megaraid mbox: reset sequence completed sucessfully
> [17333237.288000] megaraid: aborting-6173089 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: scsi cmd:6173089, do now own
> [17333237.288000] megaraid: aborting-6173090 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: scsi cmd:6173090, do now own
> [17333237.288000] megaraid: aborting-6173091 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: scsi cmd:6173091, do now own
> [17333237.288000] megaraid: aborting-6173092 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: scsi cmd:6173092, do now own
> [17333237.288000] megaraid: aborting-6173093 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: scsi cmd:6173093, do now own
> [17333237.288000] megaraid: aborting-6173094 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: scsi cmd:6173094, do now own
> [17333237.288000] megaraid: aborting-6173095 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: scsi cmd:6173095, do now own
> [17333237.288000] megaraid: aborting-6173096 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: scsi cmd:6173096, do now own
> [17333237.288000] megaraid: aborting-6173098 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173098:90[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173099 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173099:120[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173103 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173103:49[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173116 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173116:97[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173117 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173117:62[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173118 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173118:77[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173119 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173119:94[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173126 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173126:72[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173127 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173127:115[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173128 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173128:61[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173129 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173129:57[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173139 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173139:79[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173140 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173140:38[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173142 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173142:116[255:129], fw owner
> [17333237.288000] megaraid: aborting-6173144 cmd=2a <c=2 t=1 l=0>
> [17333237.288000] megaraid abort: 6173144:76[255:129], fw owner
> [17333237.288000] megaraid: 15 outstanding commands. Max wait 300 sec
> [17333237.288000] megaraid mbox: Wait for 15 commands to complete:300
> [17333242.308000] megaraid mbox: Wait for 10 commands to complete:295
> [17333247.328000] megaraid mbox: Wait for 3 commands to complete:290
> [17333249.336000] megaraid mbox: reset sequence completed sucessfully
> [17333310.648000] megaraid: aborting-6173544 cmd=2a <c=2 t=1 l=0>
> [17333310.648000] megaraid abort: scsi cmd:6173544, do now own
> [17333310.648000] megaraid: aborting-6173545 cmd=2a <c=2 t=1 l=0>
> [17333310.648000] megaraid abort: scsi cmd:6173545, do now own
> [17333310.648000] megaraid: aborting-6173546 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173546, do now own
> [17333310.652000] megaraid: aborting-6173547 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173547, do now own
> [17333310.652000] megaraid: aborting-6173563 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173563, do now own
> [17333310.652000] megaraid: aborting-6173564 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173564, do now own
> [17333310.652000] megaraid: aborting-6173565 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173565, do now own
> [17333310.652000] megaraid: aborting-6173566 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173566, do now own
> [17333310.652000] megaraid: aborting-6173567 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173567, do now own
> [17333310.652000] megaraid: aborting-6173568 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173568, do now own
> [17333310.652000] megaraid: aborting-6173569 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173569, do now own
> [17333310.652000] megaraid: aborting-6173578 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173578, do now own
> [17333310.652000] megaraid: aborting-6173579 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173579, do now own
> [17333310.652000] megaraid: aborting-6173580 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173580, do now own
> [17333310.652000] megaraid: aborting-6173583 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173583, do now own
> [17333310.652000] megaraid: aborting-6173598 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173598, do now own
> [17333310.652000] megaraid: aborting-6173599 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173599, do now own
> [17333310.652000] megaraid: aborting-6173600 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173600, do now own
> [17333310.652000] megaraid: aborting-6173601 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173601, do now own
> [17333310.652000] megaraid: aborting-6173602 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173602, do now own
> [17333310.652000] megaraid: aborting-6173603 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173603, do now own
> [17333310.652000] megaraid: aborting-6173604 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173604, do now own
> [17333310.652000] megaraid: aborting-6173605 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173605, do now own
> [17333310.652000] megaraid: aborting-6173633 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173633, do now own
> [17333310.652000] megaraid: aborting-6173638 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173638, do now own
> [17333310.652000] megaraid: aborting-6173639 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173639, do now own
> [17333310.652000] megaraid: aborting-6173640 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173640, do now own
> [17333310.652000] megaraid: aborting-6173662 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173662, do now own
> [17333310.652000] megaraid: aborting-6173663 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173663, do now own
> [17333310.652000] megaraid: aborting-6173664 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173664, do now own
> [17333310.652000] megaraid: aborting-6173665 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173665, do now own
> [17333310.652000] megaraid: aborting-6173675 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173675, do now own
> [17333310.652000] megaraid: aborting-6173677 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173677, do now own
> [17333310.652000] megaraid: aborting-6173678 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173678, do now own
> [17333310.652000] megaraid: aborting-6173679 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173679, do now own
> [17333310.652000] megaraid: aborting-6173685 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173685, do now own
> [17333310.652000] megaraid: aborting-6173686 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173686, do now own
> [17333310.652000] megaraid: aborting-6173687 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173687, do now own
> [17333310.652000] megaraid: aborting-6173688 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173688, do now own
> [17333310.652000] megaraid: aborting-6173699 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173699, do now own
> [17333310.652000] megaraid: aborting-6173700 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173700, do now own
> [17333310.652000] megaraid: aborting-6173701 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: scsi cmd:6173701, do now own
> [17333310.652000] megaraid: aborting-6173702 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173702:112[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173712 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173712:25[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173713 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173713:92[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173717 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173717:31[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173718 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173718:54[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173722 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173722:124[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173723 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173723:56[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173728 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173728:107[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173733 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173733:8[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173736 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173736:98[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173737 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173737:33[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173738 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173738:1[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173743 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173743:10[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173759 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173759:21[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173760 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173760:5[255:129], fw owner
> [17333310.652000] megaraid: aborting-6173769 cmd=2a <c=2 t=1 l=0>
> [17333310.652000] megaraid abort: 6173769:127[255:129], fw owner
> [17333310.652000] megaraid: 16 outstanding commands. Max wait 300 sec
> [17333310.652000] megaraid mbox: Wait for 16 commands to complete:300
> [17333315.672000] megaraid mbox: Wait for 10 commands to complete:295
> [17333320.692000] megaraid mbox: Wait for 2 commands to complete:290
> [17333321.696000] megaraid mbox: reset sequence completed sucessfully
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Recurring MegaRAID SCSI Errors
2006-10-20 12:41 Ju, Seokmann
@ 2006-10-20 13:53 ` Joshua Schmidlkofer
0 siblings, 0 replies; 9+ messages in thread
From: Joshua Schmidlkofer @ 2006-10-20 13:53 UTC (permalink / raw)
To: Ju, Seokmann
Cc: Andrew Morton, linux-scsi, Joshua Schmidlkofer, Mike Montagne
Ju, Seokmann wrote:
> Hi,
>
>> [17333187.152000] megaraid: aborting-6172714 cmd=2a <c=2 t=1 l=0>
>> [17333187.152000] megaraid abort: 6172714:124[255:129], fw owner
>> [17333187.152000] megaraid: 15 outstanding commands. Max wait 300 sec
>> [17333187.152000] megaraid mbox: Wait for 15 commands to complete:300
>> [17333192.172000] megaraid mbox: Wait for 10 commands to complete:295
>> [17333197.192000] megaraid mbox: Wait for 3 commands to complete:290
>> [17333199.200000] megaraid mbox: reset sequence completed sucessfully
>>
> Above messages indicate that,
> - there are commands (mostly WRITE(10)) pending in MegaRAID F/W taking longer than given timeout period.
> - After driver waitinf for 10 seconds, all of those commands had been returned successfully.
> - So, the driver returned back to normal operation.
>
> There is NO data loss/integrity error related to this messages as driver returned back to normal successfully.
> Howerver, to get rid of those messages, I would like to ask you to check and upgrade F/W image on the controllers, first.
>
> Thank you,
>
> Seokmann
>
Seokmann,
Thank you for your reply. This makes me feel _much_ better. =). We
have verified all the firmware levels except the PowerVault 220 external
chassis. We have only hit this error with external devices, and since
we went ot the PV220 from an older chassis it has continued. (All new
controllers, system and motherboard, but the same Debian Install w/ a
newer kernel). We have scheduled outage this weekend to down the
server and then use the diagnostic tools to check/update the firmware
inside the PowerVault.
Since we have brand-new hardware all over - do you have any other
recommendations about what, if anything, further could be done, if the
firmware is confirmed up to date?
Sincerely,
Joshua
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: Recurring MegaRAID SCSI Errors
@ 2006-10-20 14:08 Ju, Seokmann
2006-10-20 15:07 ` Patrick_Boyd
0 siblings, 1 reply; 9+ messages in thread
From: Ju, Seokmann @ 2006-10-20 14:08 UTC (permalink / raw)
To: Joshua Schmidlkofer
Cc: Andrew Morton, linux-scsi, Joshua Schmidlkofer, Mike Montagne
On Friday, October 20, 2006 9:53 AM, Joshua Schmidlkofer wrote:
> Thank you for your reply. This makes me feel _much_
> better. =). We
> have verified all the firmware levels except the PowerVault
> 220 external
> chassis. We have only hit this error with external devices,
> and since
> we went ot the PV220 from an older chassis it has continued. (All new
> controllers, system and motherboard, but the same Debian Install w/ a
> newer kernel). We have scheduled outage this weekend to down the
> server and then use the diagnostic tools to check/update the
> firmware
> inside the PowerVault.
Hi Joshua,
If it is happening only with external chassis, you may want to check with DELl as I don't have any valueable clue with it.
Thank you,
Seokmann
> -----Original Message-----
> From: Joshua Schmidlkofer [mailto:joshua@imrlive.com]
> Sent: Friday, October 20, 2006 9:53 AM
> To: Ju, Seokmann
> Cc: Andrew Morton; linux-scsi@vger.kernel.org; Joshua
> Schmidlkofer; Mike Montagne
> Subject: Re: Recurring MegaRAID SCSI Errors
>
> Ju, Seokmann wrote:
> > Hi,
> >
> >> [17333187.152000] megaraid: aborting-6172714 cmd=2a <c=2 t=1 l=0>
> >> [17333187.152000] megaraid abort: 6172714:124[255:129], fw owner
> >> [17333187.152000] megaraid: 15 outstanding commands. Max
> wait 300 sec
> >> [17333187.152000] megaraid mbox: Wait for 15 commands to
> complete:300
> >> [17333192.172000] megaraid mbox: Wait for 10 commands to
> complete:295
> >> [17333197.192000] megaraid mbox: Wait for 3 commands to
> complete:290
> >> [17333199.200000] megaraid mbox: reset sequence completed
> sucessfully
> >>
> > Above messages indicate that,
> > - there are commands (mostly WRITE(10)) pending in MegaRAID
> F/W taking longer than given timeout period.
> > - After driver waitinf for 10 seconds, all of those
> commands had been returned successfully.
> > - So, the driver returned back to normal operation.
> >
> > There is NO data loss/integrity error related to this
> messages as driver returned back to normal successfully.
> > Howerver, to get rid of those messages, I would like to ask
> you to check and upgrade F/W image on the controllers, first.
> >
> > Thank you,
> >
> > Seokmann
> >
> Seokmann,
>
> Thank you for your reply. This makes me feel _much_
> better. =). We
> have verified all the firmware levels except the PowerVault
> 220 external
> chassis. We have only hit this error with external devices,
> and since
> we went ot the PV220 from an older chassis it has continued. (All new
> controllers, system and motherboard, but the same Debian Install w/ a
> newer kernel). We have scheduled outage this weekend to down the
> server and then use the diagnostic tools to check/update the
> firmware
> inside the PowerVault.
>
> Since we have brand-new hardware all over - do you have any other
> recommendations about what, if anything, further could be
> done, if the
> firmware is confirmed up to date?
>
>
> Sincerely,
> Joshua
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: Recurring MegaRAID SCSI Errors
2006-10-20 14:08 Ju, Seokmann
@ 2006-10-20 15:07 ` Patrick_Boyd
0 siblings, 0 replies; 9+ messages in thread
From: Patrick_Boyd @ 2006-10-20 15:07 UTC (permalink / raw)
To: Seokmann.Ju, joshua; +Cc: akpm, linux-scsi, jms, mike
You aren't lossing any data your commands are just taking a lot longer
than they should and the only variables left are your drives and your
enclosure. I would make sure that you are at firmware level E19 on the
PV220. If you still experience issue you might want to start looking at
firmware on the drives.
Patrick Boyd
Dell Storage Software Engineer
(512)728-3182
-----Original Message-----
From: linux-scsi-owner@vger.kernel.org
[mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Ju, Seokmann
Sent: Friday, October 20, 2006 9:08 AM
To: Joshua Schmidlkofer
Cc: Andrew Morton; linux-scsi@vger.kernel.org; Joshua Schmidlkofer; Mike
Montagne
Subject: RE: Recurring MegaRAID SCSI Errors
On Friday, October 20, 2006 9:53 AM, Joshua Schmidlkofer wrote:
> Thank you for your reply. This makes me feel _much_ better. =).
> We have verified all the firmware levels except the PowerVault 220
> external chassis. We have only hit this error with external devices,
> and since we went ot the PV220 from an older chassis it has continued.
> (All new controllers, system and motherboard, but the same Debian
> Install w/ a
> newer kernel). We have scheduled outage this weekend to down the
> server and then use the diagnostic tools to check/update the firmware
> inside the PowerVault.
Hi Joshua,
If it is happening only with external chassis, you may want to check
with DELl as I don't have any valueable clue with it.
Thank you,
Seokmann
> -----Original Message-----
> From: Joshua Schmidlkofer [mailto:joshua@imrlive.com]
> Sent: Friday, October 20, 2006 9:53 AM
> To: Ju, Seokmann
> Cc: Andrew Morton; linux-scsi@vger.kernel.org; Joshua Schmidlkofer;
> Mike Montagne
> Subject: Re: Recurring MegaRAID SCSI Errors
>
> Ju, Seokmann wrote:
> > Hi,
> >
> >> [17333187.152000] megaraid: aborting-6172714 cmd=2a <c=2 t=1 l=0>
> >> [17333187.152000] megaraid abort: 6172714:124[255:129], fw owner
> >> [17333187.152000] megaraid: 15 outstanding commands. Max
> wait 300 sec
> >> [17333187.152000] megaraid mbox: Wait for 15 commands to
> complete:300
> >> [17333192.172000] megaraid mbox: Wait for 10 commands to
> complete:295
> >> [17333197.192000] megaraid mbox: Wait for 3 commands to
> complete:290
> >> [17333199.200000] megaraid mbox: reset sequence completed
> sucessfully
> >>
> > Above messages indicate that,
> > - there are commands (mostly WRITE(10)) pending in MegaRAID
> F/W taking longer than given timeout period.
> > - After driver waitinf for 10 seconds, all of those
> commands had been returned successfully.
> > - So, the driver returned back to normal operation.
> >
> > There is NO data loss/integrity error related to this
> messages as driver returned back to normal successfully.
> > Howerver, to get rid of those messages, I would like to ask
> you to check and upgrade F/W image on the controllers, first.
> >
> > Thank you,
> >
> > Seokmann
> >
> Seokmann,
>
> Thank you for your reply. This makes me feel _much_ better. =).
> We have verified all the firmware levels except the PowerVault 220
> external chassis. We have only hit this error with external devices,
> and since we went ot the PV220 from an older chassis it has continued.
> (All new controllers, system and motherboard, but the same Debian
> Install w/ a
> newer kernel). We have scheduled outage this weekend to down the
> server and then use the diagnostic tools to check/update the firmware
> inside the PowerVault.
>
> Since we have brand-new hardware all over - do you have any other
> recommendations about what, if anything, further could be done, if the
> firmware is confirmed up to date?
>
>
> Sincerely,
> Joshua
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2006-10-20 15:07 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-19 22:09 Recurring MegaRAID SCSI Errors Joshua Schmidlkofer
2006-10-19 22:11 ` Joshua Schmidlkofer
2006-10-19 22:26 ` Matt Domsch
2006-10-19 22:37 ` Joshua Schmidlkofer
2006-10-20 0:38 ` Matt Domsch
-- strict thread matches above, loose matches on Subject: below --
2006-10-20 12:41 Ju, Seokmann
2006-10-20 13:53 ` Joshua Schmidlkofer
2006-10-20 14:08 Ju, Seokmann
2006-10-20 15:07 ` Patrick_Boyd
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.