From: arnd@arndb.de
To: cbe-oss-dev@ozlabs.org, linuxppc-dev@ozlabs.org,
linux-kernel@vger.kernel.org, paulus@samba.org
Cc: Kevin Corry <kevcorry@us.ibm.com>,
Arnd Bergmann <arnd.bergmann@de.ibm.com>
Subject: [PATCH 09/16] cell: add low-level performance monitoring code
Date: Tue, 24 Oct 2006 18:31:22 +0200 [thread overview]
Message-ID: <20061024163815.640685000@arndb.de> (raw)
In-Reply-To: 20061024163113.694643000@arndb.de
From: Kevin Corry <kevcorry@us.ibm.com>
Add routines for accessing the registers and counters in the performance
monitoring unit.
Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Index: linux-2.6/arch/powerpc/platforms/cell/Makefile
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/Makefile
+++ linux-2.6/arch/powerpc/platforms/cell/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \
- cbe_regs.o spider-pic.o pervasive.o
+ cbe_regs.o spider-pic.o pervasive.o \
+ pmu.o
obj-$(CONFIG_CBE_RAS) += ras.o
ifeq ($(CONFIG_SMP),y)
Index: linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/cbe_regs.h
+++ linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
@@ -35,6 +35,11 @@
*
*/
+/* Macros for the pm_control register. */
+#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
+#define CBE_PM_ENABLE_PERF_MON 0x80000000
+
+
union spe_reg {
u64 val;
u8 spe[8];
Index: linux-2.6/arch/powerpc/platforms/cell/pmu.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/cell/pmu.c
@@ -0,0 +1,328 @@
+/*
+ * Cell Broadband Engine Performance Monitor
+ *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Author:
+ * David Erb (djerb@us.ibm.com)
+ * Kevin Corry (kevcorry@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/reg.h>
+#include <asm/spu.h>
+
+#include "cbe_regs.h"
+#include "interrupt.h"
+#include "pmu.h"
+
+/*
+ * When writing to write-only mmio addresses, save a shadow copy. All of the
+ * registers are 32-bit, but stored in the upper-half of a 64-bit field in
+ * pmd_regs.
+ */
+
+#define WRITE_WO_MMIO(reg, x) \
+ do { \
+ u32 _x = (x); \
+ struct cbe_pmd_regs __iomem *pmd_regs; \
+ struct cbe_pmd_shadow_regs *shadow_regs; \
+ pmd_regs = cbe_get_cpu_pmd_regs(cpu); \
+ shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \
+ out_be64(&(pmd_regs->reg), (((u64)_x) << 32)); \
+ shadow_regs->reg = _x; \
+ } while (0)
+
+#define READ_SHADOW_REG(val, reg) \
+ do { \
+ struct cbe_pmd_shadow_regs *shadow_regs; \
+ shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \
+ (val) = shadow_regs->reg; \
+ } while (0)
+
+#define READ_MMIO_UPPER32(val, reg) \
+ do { \
+ struct cbe_pmd_regs __iomem *pmd_regs; \
+ pmd_regs = cbe_get_cpu_pmd_regs(cpu); \
+ (val) = (u32)(in_be64(&pmd_regs->reg) >> 32); \
+ } while (0)
+
+/*
+ * Physical counter registers.
+ * Each physical counter can act as one 32-bit counter or two 16-bit counters.
+ */
+
+u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr)
+{
+ u32 val_in_latch, val = 0;
+
+ if (phys_ctr < NR_PHYS_CTRS) {
+ READ_SHADOW_REG(val_in_latch, counter_value_in_latch);
+
+ /* Read the latch or the actual counter, whichever is newer. */
+ if (val_in_latch & (1 << phys_ctr)) {
+ READ_SHADOW_REG(val, pm_ctr[phys_ctr]);
+ } else {
+ READ_MMIO_UPPER32(val, pm_ctr[phys_ctr]);
+ }
+ }
+
+ return val;
+}
+
+void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val)
+{
+ struct cbe_pmd_shadow_regs *shadow_regs;
+ u32 pm_ctrl;
+
+ if (phys_ctr < NR_PHYS_CTRS) {
+ /* Writing to a counter only writes to a hardware latch.
+ * The new value is not propagated to the actual counter
+ * until the performance monitor is enabled.
+ */
+ WRITE_WO_MMIO(pm_ctr[phys_ctr], val);
+
+ pm_ctrl = cbe_read_pm(cpu, pm_control);
+ if (pm_ctrl & CBE_PM_ENABLE_PERF_MON) {
+ /* The counters are already active, so we need to
+ * rewrite the pm_control register to "re-enable"
+ * the PMU.
+ */
+ cbe_write_pm(cpu, pm_control, pm_ctrl);
+ } else {
+ shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
+ shadow_regs->counter_value_in_latch |= (1 << phys_ctr);
+ }
+ }
+}
+
+/*
+ * "Logical" counter registers.
+ * These will read/write 16-bits or 32-bits depending on the
+ * current size of the counter. Counters 4 - 7 are always 16-bit.
+ */
+
+u32 cbe_read_ctr(u32 cpu, u32 ctr)
+{
+ u32 val;
+ u32 phys_ctr = ctr & (NR_PHYS_CTRS - 1);
+
+ val = cbe_read_phys_ctr(cpu, phys_ctr);
+
+ if (cbe_get_ctr_size(cpu, phys_ctr) == 16)
+ val = (ctr < NR_PHYS_CTRS) ? (val >> 16) : (val & 0xffff);
+
+ return val;
+}
+
+void cbe_write_ctr(u32 cpu, u32 ctr, u32 val)
+{
+ u32 phys_ctr;
+ u32 phys_val;
+
+ phys_ctr = ctr & (NR_PHYS_CTRS - 1);
+
+ if (cbe_get_ctr_size(cpu, phys_ctr) == 16) {
+ phys_val = cbe_read_phys_ctr(cpu, phys_ctr);
+
+ if (ctr < NR_PHYS_CTRS)
+ val = (val << 16) | (phys_val & 0xffff);
+ else
+ val = (val & 0xffff) | (phys_val & 0xffff0000);
+ }
+
+ cbe_write_phys_ctr(cpu, phys_ctr, val);
+}
+
+/*
+ * Counter-control registers.
+ * Each "logical" counter has a corresponding control register.
+ */
+
+u32 cbe_read_pm07_control(u32 cpu, u32 ctr)
+{
+ u32 pm07_control = 0;
+
+ if (ctr < NR_CTRS)
+ READ_SHADOW_REG(pm07_control, pm07_control[ctr]);
+
+ return pm07_control;
+}
+
+void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val)
+{
+ if (ctr < NR_CTRS)
+ WRITE_WO_MMIO(pm07_control[ctr], val);
+}
+
+/*
+ * Other PMU control registers. Most of these are write-only.
+ */
+
+u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg)
+{
+ u32 val = 0;
+
+ switch (reg) {
+ case group_control:
+ READ_SHADOW_REG(val, group_control);
+ break;
+
+ case debug_bus_control:
+ READ_SHADOW_REG(val, debug_bus_control);
+ break;
+
+ case trace_address:
+ READ_MMIO_UPPER32(val, trace_address);
+ break;
+
+ case ext_tr_timer:
+ READ_SHADOW_REG(val, ext_tr_timer);
+ break;
+
+ case pm_status:
+ READ_MMIO_UPPER32(val, pm_status);
+ break;
+
+ case pm_control:
+ READ_SHADOW_REG(val, pm_control);
+ break;
+
+ case pm_interval:
+ READ_SHADOW_REG(val, pm_interval);
+ break;
+
+ case pm_start_stop:
+ READ_SHADOW_REG(val, pm_start_stop);
+ break;
+ }
+
+ return val;
+}
+
+void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val)
+{
+ switch (reg) {
+ case group_control:
+ WRITE_WO_MMIO(group_control, val);
+ break;
+
+ case debug_bus_control:
+ WRITE_WO_MMIO(debug_bus_control, val);
+ break;
+
+ case trace_address:
+ WRITE_WO_MMIO(trace_address, val);
+ break;
+
+ case ext_tr_timer:
+ WRITE_WO_MMIO(ext_tr_timer, val);
+ break;
+
+ case pm_status:
+ WRITE_WO_MMIO(pm_status, val);
+ break;
+
+ case pm_control:
+ WRITE_WO_MMIO(pm_control, val);
+ break;
+
+ case pm_interval:
+ WRITE_WO_MMIO(pm_interval, val);
+ break;
+
+ case pm_start_stop:
+ WRITE_WO_MMIO(pm_start_stop, val);
+ break;
+ }
+}
+
+/*
+ * Get/set the size of a physical counter to either 16 or 32 bits.
+ */
+
+u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr)
+{
+ u32 pm_ctrl, size = 0;
+
+ if (phys_ctr < NR_PHYS_CTRS) {
+ pm_ctrl = cbe_read_pm(cpu, pm_control);
+ size = (pm_ctrl & CBE_PM_16BIT_CTR(phys_ctr)) ? 16 : 32;
+ }
+
+ return size;
+}
+
+void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size)
+{
+ u32 pm_ctrl;
+
+ if (phys_ctr < NR_PHYS_CTRS) {
+ pm_ctrl = cbe_read_pm(cpu, pm_control);
+ switch (ctr_size) {
+ case 16:
+ pm_ctrl |= CBE_PM_16BIT_CTR(phys_ctr);
+ break;
+
+ case 32:
+ pm_ctrl &= ~CBE_PM_16BIT_CTR(phys_ctr);
+ break;
+ }
+ cbe_write_pm(cpu, pm_control, pm_ctrl);
+ }
+}
+
+/*
+ * Enable/disable the entire performance monitoring unit.
+ * When we enable the PMU, all pending writes to counters get committed.
+ */
+
+void cbe_enable_pm(u32 cpu)
+{
+ struct cbe_pmd_shadow_regs *shadow_regs;
+ u32 pm_ctrl;
+
+ shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
+ shadow_regs->counter_value_in_latch = 0;
+
+ pm_ctrl = cbe_read_pm(cpu, pm_control) | CBE_PM_ENABLE_PERF_MON;
+ cbe_write_pm(cpu, pm_control, pm_ctrl);
+}
+
+void cbe_disable_pm(u32 cpu)
+{
+ u32 pm_ctrl;
+ pm_ctrl = cbe_read_pm(cpu, pm_control) & ~CBE_PM_ENABLE_PERF_MON;
+ cbe_write_pm(cpu, pm_control, pm_ctrl);
+}
+
+/*
+ * Reading from the trace_buffer.
+ * The trace buffer is two 64-bit registers. Reading from
+ * the second half automatically increments the trace_address.
+ */
+
+void cbe_read_trace_buffer(u32 cpu, u64 *buf)
+{
+ struct cbe_pmd_regs __iomem *pmd_regs = cbe_get_cpu_pmd_regs(cpu);
+
+ *buf++ = in_be64(&pmd_regs->trace_buffer_0_63);
+ *buf++ = in_be64(&pmd_regs->trace_buffer_64_127);
+}
+
Index: linux-2.6/arch/powerpc/platforms/cell/pmu.h
===================================================================
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/cell/pmu.h
@@ -0,0 +1,57 @@
+/*
+ * Cell Broadband Engine Performance Monitor
+ *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Author:
+ * David Erb (djerb@us.ibm.com)
+ * Kevin Corry (kevcorry@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __PERFMON_H__
+#define __PERFMON_H__
+
+enum pm_reg_name {
+ group_control,
+ debug_bus_control,
+ trace_address,
+ ext_tr_timer,
+ pm_status,
+ pm_control,
+ pm_interval,
+ pm_start_stop,
+};
+
+extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
+extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+extern u32 cbe_read_ctr(u32 cpu, u32 ctr);
+extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr);
+extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+extern u32 cbe_read_pm (u32 cpu, enum pm_reg_name reg);
+extern void cbe_write_pm (u32 cpu, enum pm_reg_name reg, u32 val);
+
+extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
+extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+extern void cbe_enable_pm(u32 cpu);
+extern void cbe_disable_pm(u32 cpu);
+
+extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
+
+#endif
--
WARNING: multiple messages have this Message-ID (diff)
From: arnd@arndb.de
To: cbe-oss-dev@ozlabs.org, linuxppc-dev@ozlabs.org,
linux-kernel@vger.kernel.org, paulus@samba.org
Cc: Kevin Corry <kevcorry@us.ibm.com>,
Arnd Bergmann <arnd.bergmann@de.ibm.com>
Subject: [PATCH 09/16] cell: add low-level performance monitoring code
Date: Tue, 24 Oct 2006 18:31:22 +0200 [thread overview]
Message-ID: <20061024163815.640685000@arndb.de> (raw)
In-Reply-To: 20061024163113.694643000@arndb.de
[-- Attachment #1: cbe-pmu-regs.diff --]
[-- Type: text/plain, Size: 11138 bytes --]
From: Kevin Corry <kevcorry@us.ibm.com>
Add routines for accessing the registers and counters in the performance
monitoring unit.
Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Index: linux-2.6/arch/powerpc/platforms/cell/Makefile
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/Makefile
+++ linux-2.6/arch/powerpc/platforms/cell/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \
- cbe_regs.o spider-pic.o pervasive.o
+ cbe_regs.o spider-pic.o pervasive.o \
+ pmu.o
obj-$(CONFIG_CBE_RAS) += ras.o
ifeq ($(CONFIG_SMP),y)
Index: linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/cbe_regs.h
+++ linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
@@ -35,6 +35,11 @@
*
*/
+/* Macros for the pm_control register. */
+#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
+#define CBE_PM_ENABLE_PERF_MON 0x80000000
+
+
union spe_reg {
u64 val;
u8 spe[8];
Index: linux-2.6/arch/powerpc/platforms/cell/pmu.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/cell/pmu.c
@@ -0,0 +1,328 @@
+/*
+ * Cell Broadband Engine Performance Monitor
+ *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Author:
+ * David Erb (djerb@us.ibm.com)
+ * Kevin Corry (kevcorry@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/reg.h>
+#include <asm/spu.h>
+
+#include "cbe_regs.h"
+#include "interrupt.h"
+#include "pmu.h"
+
+/*
+ * When writing to write-only mmio addresses, save a shadow copy. All of the
+ * registers are 32-bit, but stored in the upper-half of a 64-bit field in
+ * pmd_regs.
+ */
+
+#define WRITE_WO_MMIO(reg, x) \
+ do { \
+ u32 _x = (x); \
+ struct cbe_pmd_regs __iomem *pmd_regs; \
+ struct cbe_pmd_shadow_regs *shadow_regs; \
+ pmd_regs = cbe_get_cpu_pmd_regs(cpu); \
+ shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \
+ out_be64(&(pmd_regs->reg), (((u64)_x) << 32)); \
+ shadow_regs->reg = _x; \
+ } while (0)
+
+#define READ_SHADOW_REG(val, reg) \
+ do { \
+ struct cbe_pmd_shadow_regs *shadow_regs; \
+ shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \
+ (val) = shadow_regs->reg; \
+ } while (0)
+
+#define READ_MMIO_UPPER32(val, reg) \
+ do { \
+ struct cbe_pmd_regs __iomem *pmd_regs; \
+ pmd_regs = cbe_get_cpu_pmd_regs(cpu); \
+ (val) = (u32)(in_be64(&pmd_regs->reg) >> 32); \
+ } while (0)
+
+/*
+ * Physical counter registers.
+ * Each physical counter can act as one 32-bit counter or two 16-bit counters.
+ */
+
+u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr)
+{
+ u32 val_in_latch, val = 0;
+
+ if (phys_ctr < NR_PHYS_CTRS) {
+ READ_SHADOW_REG(val_in_latch, counter_value_in_latch);
+
+ /* Read the latch or the actual counter, whichever is newer. */
+ if (val_in_latch & (1 << phys_ctr)) {
+ READ_SHADOW_REG(val, pm_ctr[phys_ctr]);
+ } else {
+ READ_MMIO_UPPER32(val, pm_ctr[phys_ctr]);
+ }
+ }
+
+ return val;
+}
+
+void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val)
+{
+ struct cbe_pmd_shadow_regs *shadow_regs;
+ u32 pm_ctrl;
+
+ if (phys_ctr < NR_PHYS_CTRS) {
+ /* Writing to a counter only writes to a hardware latch.
+ * The new value is not propagated to the actual counter
+ * until the performance monitor is enabled.
+ */
+ WRITE_WO_MMIO(pm_ctr[phys_ctr], val);
+
+ pm_ctrl = cbe_read_pm(cpu, pm_control);
+ if (pm_ctrl & CBE_PM_ENABLE_PERF_MON) {
+ /* The counters are already active, so we need to
+ * rewrite the pm_control register to "re-enable"
+ * the PMU.
+ */
+ cbe_write_pm(cpu, pm_control, pm_ctrl);
+ } else {
+ shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
+ shadow_regs->counter_value_in_latch |= (1 << phys_ctr);
+ }
+ }
+}
+
+/*
+ * "Logical" counter registers.
+ * These will read/write 16-bits or 32-bits depending on the
+ * current size of the counter. Counters 4 - 7 are always 16-bit.
+ */
+
+u32 cbe_read_ctr(u32 cpu, u32 ctr)
+{
+ u32 val;
+ u32 phys_ctr = ctr & (NR_PHYS_CTRS - 1);
+
+ val = cbe_read_phys_ctr(cpu, phys_ctr);
+
+ if (cbe_get_ctr_size(cpu, phys_ctr) == 16)
+ val = (ctr < NR_PHYS_CTRS) ? (val >> 16) : (val & 0xffff);
+
+ return val;
+}
+
+void cbe_write_ctr(u32 cpu, u32 ctr, u32 val)
+{
+ u32 phys_ctr;
+ u32 phys_val;
+
+ phys_ctr = ctr & (NR_PHYS_CTRS - 1);
+
+ if (cbe_get_ctr_size(cpu, phys_ctr) == 16) {
+ phys_val = cbe_read_phys_ctr(cpu, phys_ctr);
+
+ if (ctr < NR_PHYS_CTRS)
+ val = (val << 16) | (phys_val & 0xffff);
+ else
+ val = (val & 0xffff) | (phys_val & 0xffff0000);
+ }
+
+ cbe_write_phys_ctr(cpu, phys_ctr, val);
+}
+
+/*
+ * Counter-control registers.
+ * Each "logical" counter has a corresponding control register.
+ */
+
+u32 cbe_read_pm07_control(u32 cpu, u32 ctr)
+{
+ u32 pm07_control = 0;
+
+ if (ctr < NR_CTRS)
+ READ_SHADOW_REG(pm07_control, pm07_control[ctr]);
+
+ return pm07_control;
+}
+
+void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val)
+{
+ if (ctr < NR_CTRS)
+ WRITE_WO_MMIO(pm07_control[ctr], val);
+}
+
+/*
+ * Other PMU control registers. Most of these are write-only.
+ */
+
+u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg)
+{
+ u32 val = 0;
+
+ switch (reg) {
+ case group_control:
+ READ_SHADOW_REG(val, group_control);
+ break;
+
+ case debug_bus_control:
+ READ_SHADOW_REG(val, debug_bus_control);
+ break;
+
+ case trace_address:
+ READ_MMIO_UPPER32(val, trace_address);
+ break;
+
+ case ext_tr_timer:
+ READ_SHADOW_REG(val, ext_tr_timer);
+ break;
+
+ case pm_status:
+ READ_MMIO_UPPER32(val, pm_status);
+ break;
+
+ case pm_control:
+ READ_SHADOW_REG(val, pm_control);
+ break;
+
+ case pm_interval:
+ READ_SHADOW_REG(val, pm_interval);
+ break;
+
+ case pm_start_stop:
+ READ_SHADOW_REG(val, pm_start_stop);
+ break;
+ }
+
+ return val;
+}
+
+void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val)
+{
+ switch (reg) {
+ case group_control:
+ WRITE_WO_MMIO(group_control, val);
+ break;
+
+ case debug_bus_control:
+ WRITE_WO_MMIO(debug_bus_control, val);
+ break;
+
+ case trace_address:
+ WRITE_WO_MMIO(trace_address, val);
+ break;
+
+ case ext_tr_timer:
+ WRITE_WO_MMIO(ext_tr_timer, val);
+ break;
+
+ case pm_status:
+ WRITE_WO_MMIO(pm_status, val);
+ break;
+
+ case pm_control:
+ WRITE_WO_MMIO(pm_control, val);
+ break;
+
+ case pm_interval:
+ WRITE_WO_MMIO(pm_interval, val);
+ break;
+
+ case pm_start_stop:
+ WRITE_WO_MMIO(pm_start_stop, val);
+ break;
+ }
+}
+
+/*
+ * Get/set the size of a physical counter to either 16 or 32 bits.
+ */
+
+u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr)
+{
+ u32 pm_ctrl, size = 0;
+
+ if (phys_ctr < NR_PHYS_CTRS) {
+ pm_ctrl = cbe_read_pm(cpu, pm_control);
+ size = (pm_ctrl & CBE_PM_16BIT_CTR(phys_ctr)) ? 16 : 32;
+ }
+
+ return size;
+}
+
+void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size)
+{
+ u32 pm_ctrl;
+
+ if (phys_ctr < NR_PHYS_CTRS) {
+ pm_ctrl = cbe_read_pm(cpu, pm_control);
+ switch (ctr_size) {
+ case 16:
+ pm_ctrl |= CBE_PM_16BIT_CTR(phys_ctr);
+ break;
+
+ case 32:
+ pm_ctrl &= ~CBE_PM_16BIT_CTR(phys_ctr);
+ break;
+ }
+ cbe_write_pm(cpu, pm_control, pm_ctrl);
+ }
+}
+
+/*
+ * Enable/disable the entire performance monitoring unit.
+ * When we enable the PMU, all pending writes to counters get committed.
+ */
+
+void cbe_enable_pm(u32 cpu)
+{
+ struct cbe_pmd_shadow_regs *shadow_regs;
+ u32 pm_ctrl;
+
+ shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
+ shadow_regs->counter_value_in_latch = 0;
+
+ pm_ctrl = cbe_read_pm(cpu, pm_control) | CBE_PM_ENABLE_PERF_MON;
+ cbe_write_pm(cpu, pm_control, pm_ctrl);
+}
+
+void cbe_disable_pm(u32 cpu)
+{
+ u32 pm_ctrl;
+ pm_ctrl = cbe_read_pm(cpu, pm_control) & ~CBE_PM_ENABLE_PERF_MON;
+ cbe_write_pm(cpu, pm_control, pm_ctrl);
+}
+
+/*
+ * Reading from the trace_buffer.
+ * The trace buffer is two 64-bit registers. Reading from
+ * the second half automatically increments the trace_address.
+ */
+
+void cbe_read_trace_buffer(u32 cpu, u64 *buf)
+{
+ struct cbe_pmd_regs __iomem *pmd_regs = cbe_get_cpu_pmd_regs(cpu);
+
+ *buf++ = in_be64(&pmd_regs->trace_buffer_0_63);
+ *buf++ = in_be64(&pmd_regs->trace_buffer_64_127);
+}
+
Index: linux-2.6/arch/powerpc/platforms/cell/pmu.h
===================================================================
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/cell/pmu.h
@@ -0,0 +1,57 @@
+/*
+ * Cell Broadband Engine Performance Monitor
+ *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Author:
+ * David Erb (djerb@us.ibm.com)
+ * Kevin Corry (kevcorry@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __PERFMON_H__
+#define __PERFMON_H__
+
+enum pm_reg_name {
+ group_control,
+ debug_bus_control,
+ trace_address,
+ ext_tr_timer,
+ pm_status,
+ pm_control,
+ pm_interval,
+ pm_start_stop,
+};
+
+extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
+extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+extern u32 cbe_read_ctr(u32 cpu, u32 ctr);
+extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr);
+extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+extern u32 cbe_read_pm (u32 cpu, enum pm_reg_name reg);
+extern void cbe_write_pm (u32 cpu, enum pm_reg_name reg, u32 val);
+
+extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
+extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+extern void cbe_enable_pm(u32 cpu);
+extern void cbe_disable_pm(u32 cpu);
+
+extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
+
+#endif
--
next prev parent reply other threads:[~2006-10-24 16:31 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-24 16:31 [PATCH 00/16] cell patches for 2.6.20 arnd
2006-10-24 16:31 ` [PATCH 01/16] spufs: wrap mfc sdr access arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 02/16] cell: remove unused struct spu variable arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 03/16] spufs: add support for nonschedulable contexts arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 04/16] spufs: "stataus" isnt a word arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 05/16] spufs: allow isolated mode apps by starting the SPE loader arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 06/16] spufs: Add isolated-mode SPE recycling support arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 07/16] cell: update cell be register definitions arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 08/16] cell: add shadow registers for pmd_reg arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` arnd [this message]
2006-10-24 16:31 ` [PATCH 09/16] cell: add low-level performance monitoring code arnd
2006-10-24 16:31 ` [PATCH 10/16] cell: add support for registering sysfs attributes to spus arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 11/16] sysfs: add support for adding/removing spu sysfs attributes arnd
2006-10-24 16:31 ` arnd
2006-10-25 7:52 ` Heiko Carstens
2006-10-25 7:52 ` Heiko Carstens
2006-10-25 12:27 ` Arnd Bergmann
2006-10-25 12:27 ` Arnd Bergmann
2006-10-24 16:31 ` [PATCH 12/16] cell: add temperature to SPU and CPU sysfs entries arnd
2006-10-24 16:31 ` arnd
2006-10-25 8:00 ` Heiko Carstens
2006-10-25 8:00 ` Heiko Carstens
2006-10-25 23:19 ` [Cbe-oss-dev] " Benjamin Herrenschmidt
2006-10-25 23:19 ` Benjamin Herrenschmidt
2006-10-26 7:35 ` Arnd Bergmann
2006-10-26 7:35 ` Arnd Bergmann
2006-10-26 9:19 ` Benjamin Herrenschmidt
2006-10-26 9:19 ` Benjamin Herrenschmidt
2006-10-24 16:31 ` [PATCH 13/16] cell: use ppc_md->power_save instead of cbe_idle_loop arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 14/16] add support for stopping spus from xmon arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:31 ` [PATCH 15/16] add support for dumping spu info " arnd
2006-10-24 16:31 ` arnd
2006-10-24 16:39 ` [PATCH 16/16] cell: add cpufreq driver for Cell BE processor arnd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061024163815.640685000@arndb.de \
--to=arnd@arndb.de \
--cc=arnd.bergmann@de.ibm.com \
--cc=cbe-oss-dev@ozlabs.org \
--cc=kevcorry@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.