* Re: 2.6.19-rc5-mm2 -- bcm43xx busted (backing out the bcm43xx patches fixes it)
2006-11-15 20:16 ` Rafael J. Wysocki
2006-11-16 2:16 ` Larry Finger
@ 2006-11-16 3:04 ` Miles Lane
1 sibling, 0 replies; 7+ messages in thread
From: Miles Lane @ 2006-11-16 3:04 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Bcm43xx-dev, Michael Buesch, John W. Linville, Andrew Morton,
LKML, Larry.Finger
Hmm, I am not sure whether you want it inline or attached.
--- linux-2.6.19-rc5/drivers/net/wireless/bcm43xx/bcm43xx.h
2006-11-07 21:14:05.000000000 -0800
+++ devel/drivers/net/wireless/bcm43xx/bcm43xx.h 2006-11-14
01:10:12.000000000 -0800
@@ -159,6 +159,7 @@
/* Chipcommon registers. */
#define BCM43xx_CHIPCOMMON_CAPABILITIES 0x04
+#define BCM43xx_CHIPCOMMON_CTL 0x28
#define BCM43xx_CHIPCOMMON_PLLONDELAY 0xB0
#define BCM43xx_CHIPCOMMON_FREFSELDELAY 0xB4
#define BCM43xx_CHIPCOMMON_SLOWCLKCTL 0xB8
@@ -172,6 +173,33 @@
/* SBTOPCI2 values. */
#define BCM43xx_SBTOPCI2_PREFETCH 0x4
#define BCM43xx_SBTOPCI2_BURST 0x8
+#define BCM43xx_SBTOPCI2_MEMREAD_MULTI 0x20
+
+/* PCI-E core registers. */
+#define BCM43xx_PCIECORE_REG_ADDR 0x0130
+#define BCM43xx_PCIECORE_REG_DATA 0x0134
+#define BCM43xx_PCIECORE_MDIO_CTL 0x0128
+#define BCM43xx_PCIECORE_MDIO_DATA 0x012C
+
+/* PCI-E registers. */
+#define BCM43xx_PCIE_TLP_WORKAROUND 0x0004
+#define BCM43xx_PCIE_DLLP_LINKCTL 0x0100
+
+/* PCI-E MDIO bits. */
+#define BCM43xx_PCIE_MDIO_ST 0x40000000
+#define BCM43xx_PCIE_MDIO_WT 0x10000000
+#define BCM43xx_PCIE_MDIO_DEV 22
+#define BCM43xx_PCIE_MDIO_REG 18
+#define BCM43xx_PCIE_MDIO_TA 0x00020000
+#define BCM43xx_PCIE_MDIO_TC 0x0100
+
+/* MDIO devices. */
+#define BCM43xx_MDIO_SERDES_RX 0x1F
+
+/* SERDES RX registers. */
+#define BCM43xx_SERDES_RXTIMER 0x2
+#define BCM43xx_SERDES_CDR 0x6
+#define BCM43xx_SERDES_CDR_BW 0x7
/* Chipcommon capabilities. */
#define BCM43xx_CAPABILITIES_PCTL 0x00040000
@@ -221,6 +249,7 @@
#define BCM43xx_COREID_USB20_HOST 0x819
#define BCM43xx_COREID_USB20_DEV 0x81a
#define BCM43xx_COREID_SDIO_HOST 0x81b
+#define BCM43xx_COREID_PCIE 0x820
/* Core Information Registers */
#define BCM43xx_CIR_BASE 0xf00
@@ -365,6 +394,9 @@
#define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT 7
#define BCM43xx_DEFAULT_LONG_RETRY_LIMIT 4
+/* FIXME: the next line is a guess as to what the maximum RSSI value
might be */
+#define RX_RSSI_MAX 60
+
/* Max size of a security key */
#define BCM43xx_SEC_KEYSIZE 16
/* Security algorithms. */
--- linux-2.6.19-rc5/drivers/net/wireless/bcm43xx/bcm43xx_main.c
2006-11-07 21:14:05.000000000 -0800
+++ devel/drivers/net/wireless/bcm43xx/bcm43xx_main.c 2006-11-14
01:10:21.000000000 -0800
@@ -130,6 +130,10 @@ MODULE_PARM_DESC(fwpostfix, "Postfix for
{ PCI_VENDOR_ID_BROADCOM, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/* Broadcom 4307 802.11b */
{ PCI_VENDOR_ID_BROADCOM, 0x4307, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* Broadcom 4311 802.11(a)/b/g */
+ { PCI_VENDOR_ID_BROADCOM, 0x4311, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* Broadcom 4312 802.11a/b/g */
+ { PCI_VENDOR_ID_BROADCOM, 0x4312, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/* Broadcom 4318 802.11b/g */
{ PCI_VENDOR_ID_BROADCOM, 0x4318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/* Broadcom 4319 802.11a/b/g */
@@ -746,7 +750,7 @@ int bcm43xx_sprom_write(struct bcm43xx_p
if (err)
goto err_ctlreg;
spromctl |= 0x10; /* SPROM WRITE enable. */
- bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl);
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL,
spromctl);
if (err)
goto err_ctlreg;
/* We must burn lots of CPU cycles here, but that does not
@@ -768,7 +772,7 @@ int bcm43xx_sprom_write(struct bcm43xx_p
mdelay(20);
}
spromctl &= ~0x10; /* SPROM WRITE enable. */
- bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl);
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL,
spromctl);
if (err)
goto err_ctlreg;
mdelay(500);
@@ -1463,6 +1467,23 @@ static void handle_irq_transmit_status(s
}
}
+static void drain_txstatus_queue(struct bcm43xx_private *bcm)
+{
+ u32 dummy;
+
+ if (bcm->current_core->rev < 5)
+ return;
+ /* Read all entries from the microcode TXstatus FIFO
+ * and throw them away.
+ */
+ while (1) {
+ dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_0);
+ if (!dummy)
+ break;
+ dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_1);
+ }
+}
+
static void bcm43xx_generate_noise_sample(struct bcm43xx_private *bcm)
{
bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x408, 0x7F7F);
@@ -2583,8 +2604,9 @@ static int bcm43xx_probe_cores(struct bc
/* fetch sb_id_hi from core information registers */
sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
- core_id = (sb_id_hi & 0xFFF0) >> 4;
- core_rev = (sb_id_hi & 0xF);
+ core_id = (sb_id_hi & 0x8FF0) >> 4;
+ core_rev = (sb_id_hi & 0x7000) >> 8;
+ core_rev |= (sb_id_hi & 0xF);
core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
/* if present, chipcommon is always core 0; read the chipid from it */
@@ -2662,14 +2684,10 @@ static int bcm43xx_probe_cores(struct bc
bcm->chip_id, bcm->chip_rev);
dprintk(KERN_INFO PFX "Number of cores: %d\n", core_count);
if (bcm->core_chipcommon.available) {
- dprintk(KERN_INFO PFX "Core 0: ID 0x%x, rev 0x%x,
vendor 0x%x, %s\n",
- core_id, core_rev, core_vendor,
- bcm43xx_core_enabled(bcm) ? "enabled" : "disabled");
- }
-
- if (bcm->core_chipcommon.available)
+ dprintk(KERN_INFO PFX "Core 0: ID 0x%x, rev 0x%x,
vendor 0x%x\n",
+ core_id, core_rev, core_vendor);
current_core = 1;
- else
+ } else
current_core = 0;
for ( ; current_core < core_count; current_core++) {
struct bcm43xx_coreinfo *core;
@@ -2687,13 +2705,13 @@ static int bcm43xx_probe_cores(struct bc
core_rev = (sb_id_hi & 0xF);
core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
- dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x,
vendor 0x%x, %s\n",
- current_core, core_id, core_rev, core_vendor,
- bcm43xx_core_enabled(bcm) ? "enabled" : "disabled" );
+ dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x,
vendor 0x%x\n",
+ current_core, core_id, core_rev, core_vendor);
core = NULL;
switch (core_id) {
case BCM43xx_COREID_PCI:
+ case BCM43xx_COREID_PCIE:
core = &bcm->core_pci;
if (core->available) {
printk(KERN_WARNING PFX "Multiple PCI
cores found.\n");
@@ -2732,12 +2750,12 @@ static int bcm43xx_probe_cores(struct bc
case 6:
case 7:
case 9:
+ case 10:
break;
default:
- printk(KERN_ERR PFX "Error:
Unsupported 80211 core revision %u\n",
+ printk(KERN_WARNING PFX
+ "Unsupported 80211 core revision %u\n",
core_rev);
- err = -ENODEV;
- goto out;
}
bcm->nr_80211_available++;
core->priv = ext_80211;
@@ -2851,16 +2869,11 @@ static int bcm43xx_wireless_core_init(st
u32 sbimconfiglow;
u8 limit;
- if (bcm->chip_rev < 5) {
+ if (bcm->core_pci.rev <= 5 && bcm->core_pci.id != BCM43xx_COREID_PCIE) {
sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
- if (bcm->bustype == BCM43xx_BUSTYPE_PCI)
- sbimconfiglow |= 0x32;
- else if (bcm->bustype == BCM43xx_BUSTYPE_SB)
- sbimconfiglow |= 0x53;
- else
- assert(0);
+ sbimconfiglow |= 0x32;
bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow);
}
@@ -2987,22 +3000,64 @@ static void bcm43xx_pcicore_broadcast_va
static int bcm43xx_pcicore_commit_settings(struct bcm43xx_private *bcm)
{
- int err;
- struct bcm43xx_coreinfo *old_core;
+ int err = 0;
- old_core = bcm->current_core;
- err = bcm43xx_switch_core(bcm, &bcm->core_pci);
- if (err)
- goto out;
+ bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
- bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000);
+ if (bcm->core_chipcommon.available) {
+ err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
+ if (err)
+ goto out;
+
+ bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000);
+
+ /* this function is always called when a PCI core is mapped */
+ err = bcm43xx_switch_core(bcm, &bcm->core_pci);
+ if (err)
+ goto out;
+ } else
+ bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000);
+
+ bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate);
- bcm43xx_switch_core(bcm, old_core);
- assert(err == 0);
out:
return err;
}
+static u32 bcm43xx_pcie_reg_read(struct bcm43xx_private *bcm, u32 address)
+{
+ bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_ADDR, address);
+ return bcm43xx_read32(bcm, BCM43xx_PCIECORE_REG_DATA);
+}
+
+static void bcm43xx_pcie_reg_write(struct bcm43xx_private *bcm, u32 address,
+ u32 data)
+{
+ bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_ADDR, address);
+ bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_DATA, data);
+}
+
+static void bcm43xx_pcie_mdio_write(struct bcm43xx_private *bcm, u8
dev, u8 reg,
+ u16 data)
+{
+ int i;
+
+ bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_CTL, 0x0082);
+ bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_DATA, BCM43xx_PCIE_MDIO_ST |
+ BCM43xx_PCIE_MDIO_WT | (dev << BCM43xx_PCIE_MDIO_DEV) |
+ (reg << BCM43xx_PCIE_MDIO_REG) | BCM43xx_PCIE_MDIO_TA |
+ data);
+ udelay(10);
+
+ for (i = 0; i < 10; i++) {
+ if (bcm43xx_read32(bcm, BCM43xx_PCIECORE_MDIO_CTL) &
+ BCM43xx_PCIE_MDIO_TC)
+ break;
+ msleep(1);
+ }
+ bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_CTL, 0);
+}
+
/* Make an I/O Core usable. "core_mask" is the bitmask of the cores to enable.
* To enable core 0, pass a core_mask of 1<<0
*/
@@ -3022,7 +3077,8 @@ static int bcm43xx_setup_backplane_pci_c
if (err)
goto out;
- if (bcm->core_pci.rev < 6) {
+ if (bcm->current_core->rev < 6 ||
+ bcm->current_core->id == BCM43xx_COREID_PCI) {
value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC);
value |= (1 << backplane_flag_nr);
bcm43xx_write32(bcm, BCM43xx_CIR_SBINTVEC, value);
@@ -3040,21 +3096,46 @@ static int bcm43xx_setup_backplane_pci_c
}
}
- value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2);
- value |= BCM43xx_SBTOPCI2_PREFETCH | BCM43xx_SBTOPCI2_BURST;
- bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value);
-
- if (bcm->core_pci.rev < 5) {
- value = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
- value |= (2 << BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT)
- & BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
- value |= (3 << BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT)
- & BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
- bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, value);
- err = bcm43xx_pcicore_commit_settings(bcm);
- assert(err == 0);
+ if (bcm->current_core->id == BCM43xx_COREID_PCI) {
+ value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2);
+ value |= BCM43xx_SBTOPCI2_PREFETCH | BCM43xx_SBTOPCI2_BURST;
+ bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value);
+
+ if (bcm->current_core->rev < 5) {
+ value = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
+ value |= (2 << BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT)
+ & BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
+ value |= (3 << BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT)
+ & BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, value);
+ err = bcm43xx_pcicore_commit_settings(bcm);
+ assert(err == 0);
+ } else if (bcm->current_core->rev >= 11) {
+ value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2);
+ value |= BCM43xx_SBTOPCI2_MEMREAD_MULTI;
+ bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value);
+ }
+ } else {
+ if (bcm->current_core->rev == 0 ||
bcm->current_core->rev == 1) {
+ value = bcm43xx_pcie_reg_read(bcm,
BCM43xx_PCIE_TLP_WORKAROUND);
+ value |= 0x8;
+ bcm43xx_pcie_reg_write(bcm, BCM43xx_PCIE_TLP_WORKAROUND,
+ value);
+ }
+ if (bcm->current_core->rev == 0) {
+ bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX,
+ BCM43xx_SERDES_RXTIMER, 0x8128);
+ bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX,
+ BCM43xx_SERDES_CDR, 0x0100);
+ bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX,
+ BCM43xx_SERDES_CDR_BW, 0x1466);
+ } else if (bcm->current_core->rev == 1) {
+ value = bcm43xx_pcie_reg_read(bcm,
BCM43xx_PCIE_DLLP_LINKCTL);
+ value |= 0x40;
+ bcm43xx_pcie_reg_write(bcm, BCM43xx_PCIE_DLLP_LINKCTL,
+ value);
+ }
}
-
out_switch_back:
err = bcm43xx_switch_core(bcm, old_core);
out:
@@ -3123,55 +3204,27 @@ static void bcm43xx_periodic_every15sec(
static void do_periodic_work(struct bcm43xx_private *bcm)
{
- unsigned int state;
-
- state = bcm->periodic_state;
- if (state % 8 == 0)
+ if (bcm->periodic_state % 8 == 0)
bcm43xx_periodic_every120sec(bcm);
- if (state % 4 == 0)
+ if (bcm->periodic_state % 4 == 0)
bcm43xx_periodic_every60sec(bcm);
- if (state % 2 == 0)
+ if (bcm->periodic_state % 2 == 0)
bcm43xx_periodic_every30sec(bcm);
- if (state % 1 == 0)
- bcm43xx_periodic_every15sec(bcm);
- bcm->periodic_state = state + 1;
+ bcm43xx_periodic_every15sec(bcm);
schedule_delayed_work(&bcm->periodic_work, HZ * 15);
}
-/* Estimate a "Badness" value based on the periodic work
- * state-machine state. "Badness" is worse (bigger), if the
- * periodic work will take longer.
- */
-static int estimate_periodic_work_badness(unsigned int state)
-{
- int badness = 0;
-
- if (state % 8 == 0) /* every 120 sec */
- badness += 10;
- if (state % 4 == 0) /* every 60 sec */
- badness += 5;
- if (state % 2 == 0) /* every 30 sec */
- badness += 1;
- if (state % 1 == 0) /* every 15 sec */
- badness += 1;
-
-#define BADNESS_LIMIT 4
- return badness;
-}
-
static void bcm43xx_periodic_work_handler(void *d)
{
struct bcm43xx_private *bcm = d;
struct net_device *net_dev = bcm->net_dev;
unsigned long flags;
u32 savedirqs = 0;
- int badness;
unsigned long orig_trans_start = 0;
mutex_lock(&bcm->mutex);
- badness = estimate_periodic_work_badness(bcm->periodic_state);
- if (badness > BADNESS_LIMIT) {
+ if (unlikely(bcm->periodic_state % 4 == 0)) {
/* Periodic work will take a long time, so we want it to
* be preemtible.
*/
@@ -3203,7 +3256,7 @@ static void bcm43xx_periodic_work_handle
do_periodic_work(bcm);
- if (badness > BADNESS_LIMIT) {
+ if (unlikely(bcm->periodic_state % 4 == 0)) {
spin_lock_irqsave(&bcm->irq_lock, flags);
tasklet_enable(&bcm->isr_tasklet);
bcm43xx_interrupt_enable(bcm, savedirqs);
@@ -3214,6 +3267,7 @@ static void bcm43xx_periodic_work_handle
net_dev->trans_start = orig_trans_start;
}
mmiowb();
+ bcm->periodic_state++;
spin_unlock_irqrestore(&bcm->irq_lock, flags);
mutex_unlock(&bcm->mutex);
}
@@ -3532,6 +3586,7 @@ int bcm43xx_select_wireless_core(struct
bcm43xx_macfilter_clear(bcm, BCM43xx_MACFILTER_ASSOC);
bcm43xx_macfilter_set(bcm, BCM43xx_MACFILTER_SELF, (u8
*)(bcm->net_dev->dev_addr));
bcm43xx_security_init(bcm);
+ drain_txstatus_queue(bcm);
ieee80211softmac_start(bcm->net_dev);
/* Let's go! Be careful after enabling the IRQs.
@@ -3658,7 +3713,7 @@ static int bcm43xx_read_phyinfo(struct b
bcm->ieee->freq_band = IEEE80211_24GHZ_BAND;
break;
case BCM43xx_PHYTYPE_G:
- if (phy_rev > 7)
+ if (phy_rev > 8)
phy_rev_ok = 0;
bcm->ieee->modulation = IEEE80211_OFDM_MODULATION |
IEEE80211_CCK_MODULATION;
@@ -3670,6 +3725,8 @@ static int bcm43xx_read_phyinfo(struct b
phy_type);
return -ENODEV;
};
+ bcm->ieee->perfect_rssi = RX_RSSI_MAX;
+ bcm->ieee->worst_rssi = 0;
if (!phy_rev_ok) {
printk(KERN_WARNING PFX "Invalid PHY Revision %x\n",
phy_rev);
--- linux-2.6.19-rc5/drivers/net/wireless/bcm43xx/bcm43xx_power.c
2006-06-17 23:01:22.000000000 -0700
+++ devel/drivers/net/wireless/bcm43xx/bcm43xx_power.c 2006-11-14
01:10:12.000000000 -0800
@@ -153,8 +153,6 @@ int bcm43xx_pctl_init(struct bcm43xx_pri
int err, maxfreq;
struct bcm43xx_coreinfo *old_core;
- if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL))
- return 0;
old_core = bcm->current_core;
err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
if (err == -ENODEV)
@@ -162,11 +160,27 @@ int bcm43xx_pctl_init(struct bcm43xx_pri
if (err)
goto out;
- maxfreq = bcm43xx_pctl_clockfreqlimit(bcm, 1);
- bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY,
- (maxfreq * 150 + 999999) / 1000000);
- bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_FREFSELDELAY,
- (maxfreq * 15 + 999999) / 1000000);
+ if (bcm->chip_id == 0x4321) {
+ if (bcm->chip_rev == 0)
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_CTL, 0x03A4);
+ if (bcm->chip_rev == 1)
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_CTL, 0x00A4);
+ }
+
+ if (bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL) {
+ if (bcm->current_core->rev >= 10) {
+ /* Set Idle Power clock rate to 1Mhz */
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL,
+ (bcm43xx_read32(bcm,
BCM43xx_CHIPCOMMON_SYSCLKCTL)
+ & 0x0000FFFF) | 0x40000);
+ } else {
+ maxfreq = bcm43xx_pctl_clockfreqlimit(bcm, 1);
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY,
+ (maxfreq * 150 + 999999) / 1000000);
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_FREFSELDELAY,
+ (maxfreq * 15 + 999999) / 1000000);
+ }
+ }
err = bcm43xx_switch_core(bcm, old_core);
assert(err == 0);
--- linux-2.6.19-rc5/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
2006-11-07 21:14:05.000000000 -0800
+++ devel/drivers/net/wireless/bcm43xx/bcm43xx_wx.c 2006-11-14
01:10:12.000000000 -0800
@@ -47,9 +47,6 @@
#define BCM43xx_WX_VERSION 18
#define MAX_WX_STRING 80
-/* FIXME: the next line is a guess as to what the maximum RSSI value
might be */
-#define RX_RSSI_MAX 60
-
static int bcm43xx_wx_get_name(struct net_device *net_dev,
struct iw_request_info *info,
@@ -693,6 +690,7 @@ static int bcm43xx_wx_set_swencryption(s
bcm->ieee->host_encrypt = !!on;
bcm->ieee->host_decrypt = !!on;
bcm->ieee->host_build_iv = !on;
+ bcm->ieee->host_strip_iv_icv = !on;
spin_unlock_irqrestore(&bcm->irq_lock, flags);
mutex_unlock(&bcm->mutex);
--- linux-2.6.19-rc5/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c
2006-11-07 21:14:05.000000000 -0800
+++ devel/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c 2006-11-14
01:10:12.000000000 -0800
@@ -543,25 +543,6 @@ int bcm43xx_rx(struct bcm43xx_private *b
break;
}
- frame_ctl = le16_to_cpu(wlhdr->frame_ctl);
- if ((frame_ctl & IEEE80211_FCTL_PROTECTED) &&
!bcm->ieee->host_decrypt) {
- frame_ctl &= ~IEEE80211_FCTL_PROTECTED;
- wlhdr->frame_ctl = cpu_to_le16(frame_ctl);
- /* trim IV and ICV */
- /* FIXME: this must be done only for WEP encrypted packets */
- if (skb->len < 32) {
- dprintkl(KERN_ERR PFX "RX packet dropped
(PROTECTED flag "
- "set and length < 32)\n");
- return -EINVAL;
- } else {
- memmove(skb->data + 4, skb->data, 24);
- skb_pull(skb, 4);
- skb_trim(skb, skb->len - 4);
- stats.len -= 8;
- }
- wlhdr = (struct ieee80211_hdr_4addr *)(skb->data);
- }
-
switch (WLAN_FC_GET_TYPE(frame_ctl)) {
case IEEE80211_FTYPE_MGMT:
ieee80211_rx_mgt(bcm->ieee, wlhdr, &stats);
^ permalink raw reply [flat|nested] 7+ messages in thread