All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@arndb.de>
To: cbe-oss-dev@ozlabs.org
Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com>,
	linuxppc-dev@ozlabs.org, Paul Mackerras <paulus@samba.org>,
	linux-kernel@vger.kernel.org, Kevin Corry <kevcorry@us.ibm.com>
Subject: [PATCH 20/22] cell: Move PMU-related stuff to include/asm-powerpc/cell-pmu.h
Date: Mon, 20 Nov 2006 18:45:14 +0100	[thread overview]
Message-ID: <20061120180527.593768000@arndb.de> (raw)
In-Reply-To: 20061120174454.067872000@arndb.de

From: Kevin Corry <kevcorry@us.ibm.com>
Move some PMU-related macros and function prototypes from cbe_regs.h
and pmu.h in arch/powerpc/platforms/cell/ to a new header at
include/asm-powerpc/cell-pmu.h

This is cleaner to use from the oprofile code, since that sits in
arch/powerpc/oprofile, not in the cell platform directory.

Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Index: linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/cbe_regs.h
+++ linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
@@ -15,6 +15,8 @@
 #ifndef CBE_REGS_H
 #define CBE_REGS_H
 
+#include <asm/cell-pmu.h>
+
 /*
  *
  * Some HID register definitions
@@ -35,32 +37,6 @@
  *
  */
 
-/* Macros for the pm_control register. */
-#define CBE_PM_16BIT_CTR(ctr)			(1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
-#define CBE_PM_ENABLE_PERF_MON			0x80000000
-#define CBE_PM_STOP_AT_MAX			0x40000000
-#define CBE_PM_TRACE_MODE_GET(pm_control)	(((pm_control) >> 28) & 0x3)
-#define CBE_PM_TRACE_MODE_SET(mode)		(((mode)  & 0x3) << 28)
-#define CBE_PM_COUNT_MODE_SET(count)		(((count) & 0x3) << 18)
-#define CBE_PM_FREEZE_ALL_CTRS			0x00100000
-#define CBE_PM_ENABLE_EXT_TRACE			0x00008000
-
-/* Macros for the trace_address register. */
-#define CBE_PM_TRACE_BUF_FULL			0x00000800
-#define CBE_PM_TRACE_BUF_EMPTY			0x00000400
-#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)		((ta) & 0x3ff)
-#define CBE_PM_TRACE_BUF_MAX_COUNT		0x400
-
-/* Macros for the pm07_control registers. */
-#define CBE_PM_CTR_INPUT_MUX(pm07_control)	(((pm07_control) >> 26) & 0x3f)
-#define CBE_PM_CTR_INPUT_CONTROL		0x02000000
-#define CBE_PM_CTR_POLARITY			0x01000000
-#define CBE_PM_CTR_COUNT_CYCLES			0x00800000
-#define CBE_PM_CTR_ENABLE			0x00400000
-
-/* Macros for the pm_status register. */
-#define CBE_PM_CTR_OVERFLOW_INTR(ctr)		(1 << (31 - ((ctr) & 7)))
-
 union spe_reg {
 	u64 val;
 	u8 spe[8];
@@ -160,9 +136,6 @@ extern struct cbe_pmd_regs __iomem *cbe_
  * counters currently have a value waiting to be written.
  */
 
-#define NR_PHYS_CTRS	4
-#define NR_CTRS		(NR_PHYS_CTRS * 2)
-
 struct cbe_pmd_shadow_regs {
 	u32 group_control;
 	u32 debug_bus_control;
Index: linux-2.6/arch/powerpc/platforms/cell/pmu.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/pmu.c
+++ linux-2.6/arch/powerpc/platforms/cell/pmu.c
@@ -30,7 +30,6 @@
 
 #include "cbe_regs.h"
 #include "interrupt.h"
-#include "pmu.h"
 
 /*
  * When writing to write-only mmio addresses, save a shadow copy. All of the
Index: linux-2.6/arch/powerpc/platforms/cell/pmu.h
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/pmu.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Cell Broadband Engine Performance Monitor
- *
- * (C) Copyright IBM Corporation 2001,2006
- *
- * Author:
- *   David Erb (djerb@us.ibm.com)
- *   Kevin Corry (kevcorry@us.ibm.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __PERFMON_H__
-#define __PERFMON_H__
-
-enum pm_reg_name {
-	group_control,
-	debug_bus_control,
-	trace_address,
-	ext_tr_timer,
-	pm_status,
-	pm_control,
-	pm_interval,
-	pm_start_stop,
-};
-
-extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
-extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
-extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
-extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
-
-extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
-extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
-extern u32  cbe_read_pm (u32 cpu, enum pm_reg_name reg);
-extern void cbe_write_pm (u32 cpu, enum pm_reg_name reg, u32 val);
-
-extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
-extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
-
-extern void cbe_enable_pm(u32 cpu);
-extern void cbe_disable_pm(u32 cpu);
-
-extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
-
-#endif
Index: linux-2.6/include/asm-powerpc/cell-pmu.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-powerpc/cell-pmu.h
@@ -0,0 +1,90 @@
+/*
+ * Cell Broadband Engine Performance Monitor
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Author:
+ *   David Erb (djerb@us.ibm.com)
+ *   Kevin Corry (kevcorry@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_CELL_PMU_H__
+#define __ASM_CELL_PMU_H__
+
+/* The Cell PMU has four hardware performance counters, which can be
+ * configured as four 32-bit counters or eight 16-bit counters.
+ */
+#define NR_PHYS_CTRS 4
+#define NR_CTRS      (NR_PHYS_CTRS * 2)
+
+/* Macros for the pm_control register. */
+#define CBE_PM_16BIT_CTR(ctr)              (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
+#define CBE_PM_ENABLE_PERF_MON             0x80000000
+#define CBE_PM_STOP_AT_MAX                 0x40000000
+#define CBE_PM_TRACE_MODE_GET(pm_control)  (((pm_control) >> 28) & 0x3)
+#define CBE_PM_TRACE_MODE_SET(mode)        (((mode)  & 0x3) << 28)
+#define CBE_PM_COUNT_MODE_SET(count)       (((count) & 0x3) << 18)
+#define CBE_PM_FREEZE_ALL_CTRS             0x00100000
+#define CBE_PM_ENABLE_EXT_TRACE            0x00008000
+
+/* Macros for the trace_address register. */
+#define CBE_PM_TRACE_BUF_FULL              0x00000800
+#define CBE_PM_TRACE_BUF_EMPTY             0x00000400
+#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)    ((ta) & 0x3ff)
+#define CBE_PM_TRACE_BUF_MAX_COUNT         0x400
+
+/* Macros for the pm07_control registers. */
+#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f)
+#define CBE_PM_CTR_INPUT_CONTROL           0x02000000
+#define CBE_PM_CTR_POLARITY                0x01000000
+#define CBE_PM_CTR_COUNT_CYCLES            0x00800000
+#define CBE_PM_CTR_ENABLE                  0x00400000
+
+/* Macros for the pm_status register. */
+#define CBE_PM_CTR_OVERFLOW_INTR(ctr)      (1 << (31 - ((ctr) & 7)))
+
+enum pm_reg_name {
+	group_control,
+	debug_bus_control,
+	trace_address,
+	ext_tr_timer,
+	pm_status,
+	pm_control,
+	pm_interval,
+	pm_start_stop,
+};
+
+/* Routines for reading/writing the PMU registers. */
+extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
+extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
+extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
+extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+extern u32  cbe_read_pm(u32 cpu, enum pm_reg_name reg);
+extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
+
+extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
+extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+extern void cbe_enable_pm(u32 cpu);
+extern void cbe_disable_pm(u32 cpu);
+
+extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
+
+#endif /* __ASM_CELL_PMU_H__ */

--

WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: cbe-oss-dev@ozlabs.org
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org,
	Paul Mackerras <paulus@samba.org>,
	Kevin Corry <kevcorry@us.ibm.com>,
	Arnd Bergmann <arnd.bergmann@de.ibm.com>
Subject: [PATCH 20/22] cell: Move PMU-related stuff to include/asm-powerpc/cell-pmu.h
Date: Mon, 20 Nov 2006 18:45:14 +0100	[thread overview]
Message-ID: <20061120180527.593768000@arndb.de> (raw)
In-Reply-To: 20061120174454.067872000@arndb.de

[-- Attachment #1: cell-move-PMU-related-stuff-to-include_asm-powerpc_cell-pmu-h.diff --]
[-- Type: text/plain, Size: 8307 bytes --]

From: Kevin Corry <kevcorry@us.ibm.com>
Move some PMU-related macros and function prototypes from cbe_regs.h
and pmu.h in arch/powerpc/platforms/cell/ to a new header at
include/asm-powerpc/cell-pmu.h

This is cleaner to use from the oprofile code, since that sits in
arch/powerpc/oprofile, not in the cell platform directory.

Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Index: linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/cbe_regs.h
+++ linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
@@ -15,6 +15,8 @@
 #ifndef CBE_REGS_H
 #define CBE_REGS_H
 
+#include <asm/cell-pmu.h>
+
 /*
  *
  * Some HID register definitions
@@ -35,32 +37,6 @@
  *
  */
 
-/* Macros for the pm_control register. */
-#define CBE_PM_16BIT_CTR(ctr)			(1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
-#define CBE_PM_ENABLE_PERF_MON			0x80000000
-#define CBE_PM_STOP_AT_MAX			0x40000000
-#define CBE_PM_TRACE_MODE_GET(pm_control)	(((pm_control) >> 28) & 0x3)
-#define CBE_PM_TRACE_MODE_SET(mode)		(((mode)  & 0x3) << 28)
-#define CBE_PM_COUNT_MODE_SET(count)		(((count) & 0x3) << 18)
-#define CBE_PM_FREEZE_ALL_CTRS			0x00100000
-#define CBE_PM_ENABLE_EXT_TRACE			0x00008000
-
-/* Macros for the trace_address register. */
-#define CBE_PM_TRACE_BUF_FULL			0x00000800
-#define CBE_PM_TRACE_BUF_EMPTY			0x00000400
-#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)		((ta) & 0x3ff)
-#define CBE_PM_TRACE_BUF_MAX_COUNT		0x400
-
-/* Macros for the pm07_control registers. */
-#define CBE_PM_CTR_INPUT_MUX(pm07_control)	(((pm07_control) >> 26) & 0x3f)
-#define CBE_PM_CTR_INPUT_CONTROL		0x02000000
-#define CBE_PM_CTR_POLARITY			0x01000000
-#define CBE_PM_CTR_COUNT_CYCLES			0x00800000
-#define CBE_PM_CTR_ENABLE			0x00400000
-
-/* Macros for the pm_status register. */
-#define CBE_PM_CTR_OVERFLOW_INTR(ctr)		(1 << (31 - ((ctr) & 7)))
-
 union spe_reg {
 	u64 val;
 	u8 spe[8];
@@ -160,9 +136,6 @@ extern struct cbe_pmd_regs __iomem *cbe_
  * counters currently have a value waiting to be written.
  */
 
-#define NR_PHYS_CTRS	4
-#define NR_CTRS		(NR_PHYS_CTRS * 2)
-
 struct cbe_pmd_shadow_regs {
 	u32 group_control;
 	u32 debug_bus_control;
Index: linux-2.6/arch/powerpc/platforms/cell/pmu.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/pmu.c
+++ linux-2.6/arch/powerpc/platforms/cell/pmu.c
@@ -30,7 +30,6 @@
 
 #include "cbe_regs.h"
 #include "interrupt.h"
-#include "pmu.h"
 
 /*
  * When writing to write-only mmio addresses, save a shadow copy. All of the
Index: linux-2.6/arch/powerpc/platforms/cell/pmu.h
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/pmu.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Cell Broadband Engine Performance Monitor
- *
- * (C) Copyright IBM Corporation 2001,2006
- *
- * Author:
- *   David Erb (djerb@us.ibm.com)
- *   Kevin Corry (kevcorry@us.ibm.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __PERFMON_H__
-#define __PERFMON_H__
-
-enum pm_reg_name {
-	group_control,
-	debug_bus_control,
-	trace_address,
-	ext_tr_timer,
-	pm_status,
-	pm_control,
-	pm_interval,
-	pm_start_stop,
-};
-
-extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
-extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
-extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
-extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
-
-extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
-extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
-extern u32  cbe_read_pm (u32 cpu, enum pm_reg_name reg);
-extern void cbe_write_pm (u32 cpu, enum pm_reg_name reg, u32 val);
-
-extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
-extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
-
-extern void cbe_enable_pm(u32 cpu);
-extern void cbe_disable_pm(u32 cpu);
-
-extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
-
-#endif
Index: linux-2.6/include/asm-powerpc/cell-pmu.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-powerpc/cell-pmu.h
@@ -0,0 +1,90 @@
+/*
+ * Cell Broadband Engine Performance Monitor
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Author:
+ *   David Erb (djerb@us.ibm.com)
+ *   Kevin Corry (kevcorry@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_CELL_PMU_H__
+#define __ASM_CELL_PMU_H__
+
+/* The Cell PMU has four hardware performance counters, which can be
+ * configured as four 32-bit counters or eight 16-bit counters.
+ */
+#define NR_PHYS_CTRS 4
+#define NR_CTRS      (NR_PHYS_CTRS * 2)
+
+/* Macros for the pm_control register. */
+#define CBE_PM_16BIT_CTR(ctr)              (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
+#define CBE_PM_ENABLE_PERF_MON             0x80000000
+#define CBE_PM_STOP_AT_MAX                 0x40000000
+#define CBE_PM_TRACE_MODE_GET(pm_control)  (((pm_control) >> 28) & 0x3)
+#define CBE_PM_TRACE_MODE_SET(mode)        (((mode)  & 0x3) << 28)
+#define CBE_PM_COUNT_MODE_SET(count)       (((count) & 0x3) << 18)
+#define CBE_PM_FREEZE_ALL_CTRS             0x00100000
+#define CBE_PM_ENABLE_EXT_TRACE            0x00008000
+
+/* Macros for the trace_address register. */
+#define CBE_PM_TRACE_BUF_FULL              0x00000800
+#define CBE_PM_TRACE_BUF_EMPTY             0x00000400
+#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)    ((ta) & 0x3ff)
+#define CBE_PM_TRACE_BUF_MAX_COUNT         0x400
+
+/* Macros for the pm07_control registers. */
+#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f)
+#define CBE_PM_CTR_INPUT_CONTROL           0x02000000
+#define CBE_PM_CTR_POLARITY                0x01000000
+#define CBE_PM_CTR_COUNT_CYCLES            0x00800000
+#define CBE_PM_CTR_ENABLE                  0x00400000
+
+/* Macros for the pm_status register. */
+#define CBE_PM_CTR_OVERFLOW_INTR(ctr)      (1 << (31 - ((ctr) & 7)))
+
+enum pm_reg_name {
+	group_control,
+	debug_bus_control,
+	trace_address,
+	ext_tr_timer,
+	pm_status,
+	pm_control,
+	pm_interval,
+	pm_start_stop,
+};
+
+/* Routines for reading/writing the PMU registers. */
+extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
+extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
+extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
+extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+extern u32  cbe_read_pm(u32 cpu, enum pm_reg_name reg);
+extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
+
+extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
+extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+extern void cbe_enable_pm(u32 cpu);
+extern void cbe_disable_pm(u32 cpu);
+
+extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
+
+#endif /* __ASM_CELL_PMU_H__ */

--


  parent reply	other threads:[~2006-11-20 17:45 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-11-20 17:44 [PATCH 00/22] Cell patches for 2.6.20 Arnd Bergmann
2006-11-20 17:44 ` Arnd Bergmann
2006-11-20 17:44 ` [PATCH 01/22] powerpc: convert idle_loop to use hard_irq_disable() Arnd Bergmann
2006-11-20 17:44   ` Arnd Bergmann
2006-11-20 21:59   ` Paul Mackerras
2006-11-20 21:59     ` Paul Mackerras
2006-11-21  0:53   ` Benjamin Herrenschmidt
2006-11-21  0:53     ` Benjamin Herrenschmidt
2006-11-21 10:14     ` Arnd Bergmann
2006-11-21 10:14       ` Arnd Bergmann
2006-11-21 16:58       ` Olof Johansson
2006-11-21 16:58         ` Olof Johansson
2006-11-20 17:44 ` [PATCH 02/22] powerpc: change ppc_rtas declaration to weak Arnd Bergmann
2006-11-20 17:44   ` Arnd Bergmann
2006-11-20 17:44 ` [PATCH 03/22] spufs: Change %llx to 0x%llx Arnd Bergmann
2006-11-20 17:44   ` Arnd Bergmann
2006-11-20 17:44 ` [PATCH 04/22] spufs: add /lslr, /dma_info and /proxydma files Arnd Bergmann
2006-11-20 17:44   ` Arnd Bergmann
2006-11-20 17:44 ` [PATCH 05/22] spufs: Remove /spu_tag_mask file Arnd Bergmann
2006-11-20 17:44   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 06/22] spufs: implement /mbox_info, /ibox_info, and /wbox_info Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 07/22] spufs: read from signal files only if data is there Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 08/22] spufs: replace spu.nid with spu.node Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 09/22] spufs: return correct event for data storage interrupt Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 10/22] spufs: fix missing stop-and-signal Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 11/22] spufs: avoid user-triggered oops in ptrace Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 12/22] spufs: always map local store non-guarded Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 13/22] spufs: fix return value of spufs_mfc_write Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 14/22] spufs: use SPU master control to prevent wild SPU execution Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2007-03-01  6:18   ` Michael Ellerman
2007-03-01  6:18     ` Michael Ellerman
2007-03-01 13:50     ` [Cbe-oss-dev] " Arnd Bergmann
2007-03-01 13:50       ` Arnd Bergmann
2007-03-02 10:13       ` Michael Ellerman
2007-03-02 10:13         ` Michael Ellerman
2007-03-05  1:02         ` Arnd Bergmann
2007-03-07  8:58           ` Michael Ellerman
2007-03-07  8:58             ` Michael Ellerman
2006-11-20 17:45 ` [PATCH 15/22] spufs: Add runcntrl read accessors Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 16/22] spufs: load isolation kernel from spu_run Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 17/22] coredump: Add SPU elf notes to coredump Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-21  5:38   ` Michael Ellerman
2006-11-21  5:38     ` Michael Ellerman
2006-11-20 17:45 ` [PATCH 18/22] cell: add symbol exports for oprofile Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 19/22] cell: PMU register macros Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` Arnd Bergmann [this message]
2006-11-20 17:45   ` [PATCH 20/22] cell: Move PMU-related stuff to include/asm-powerpc/cell-pmu.h Arnd Bergmann
2006-11-20 17:45 ` [PATCH 21/22] cell: add routines for managing PMU interrupts Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann
2006-11-20 17:45 ` [PATCH 22/22] cell: add oprofile support Arnd Bergmann
2006-11-20 17:45   ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20061120180527.593768000@arndb.de \
    --to=arnd@arndb.de \
    --cc=arnd.bergmann@de.ibm.com \
    --cc=cbe-oss-dev@ozlabs.org \
    --cc=kevcorry@us.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.