All of lore.kernel.org
 help / color / mirror / Atom feed
* [Bluez-users] bluez RFCOMM connect fail on arm platform
@ 2006-11-30 14:12 amateur
  2006-12-03 13:44 ` Marcel Holtmann
  0 siblings, 1 reply; 3+ messages in thread
From: amateur @ 2006-11-30 14:12 UTC (permalink / raw)
  To: bluez-users

Hi, All

I'm working on a project on arm platform (Cirrus EP9312 Board, Arm9)
which utilized bluez. And I now encountered a problem: the rfcomm
connection can't be established. Only occasionally can the rfcomm
connection be established. I'm using a USB dongle with Broadcom
bluetooth chip inside of hci version 2.0. This dongle works well on
my Laptop with linux-iamge-2.6.18. So I don't think the problem lies
in the bluetooth dongle.

My embeded arm platform runs the kernel 2.6.8-1 patched with patch
from www.cirrus.com. But I don't think the patch file does anything
related to bluetooth.

Is there any way to use the lastest bluetooth kernel source on a arm
platform with kernel 2.6.8-1 ?

The typical output of hcidump is as following:

	~ # hcidump -x -V
	HCI sniffer - Bluetooth packet analyzer ver 1.30
	device: hci0 snap_len: 1028 filter: 0xffffffff
	< HCI Command: Create Connection (0x01|0x0005) plen 13
	    bdaddr 00:17:B0:B1:B2:CC ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
	    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
	> HCI Event: Command Status (0x0f) plen 4
	    Create Connection (0x01|0x0005) status 0x00 ncmd 1
	> HCI Event: Connect Complete (0x03) plen 11
	    status 0x00 handle 12 bdaddr 00:17:B0:B1:B2:CC type ACL encrypt 0x00
	< ACL data: handle 12 flags 0x02 dlen 12
	    L2CAP(s): Connect req: psm 3 scid 0x0040
	> HCI Event: Max Slots Change (0x1b) plen 3
	    handle 12 slots 5
	> ACL data: handle 12 flags 0x02 dlen 16
	    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
	      Connection successful
	< ACL data: handle 12 flags 0x02 dlen 16
	    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
	      MTU 1024
	> ACL data: handle 12 flags 0x02 dlen 16
	    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
	      MTU 32772
	< ACL data: handle 12 flags 0x02 dlen 14
	    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
	      Success
	> ACL data: handle 12 flags 0x02 dlen 17
	> ACL data: handle 12 flags 0x01 dlen 1
	    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
	      Success
	      MTU 1024
	< ACL data: handle 12 flags 0x02 dlen 8
	    L2CAP(d): cid 0x0040 len 4 [psm 3]
	      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
	> HCI Event: Number of Completed Packets (0x13) plen 5
	    handle 12 packets 4
	> ACL data: handle 12 flags 0x02 dlen 8
	    L2CAP(d): cid 0x0040 len 4 [psm 3]
	      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
	< ACL data: handle 12 flags 0x02 dlen 18
	    L2CAP(d): cid 0x0040 len 14 [psm 3]
	      RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
	      dlci 18 frame_type 0 credit_flow 15 pri 7 ack_timer 0
	      frame_size 1019 max_retrans 0 credits 7
	> ACL data: handle 12 flags 0x02 dlen 18
	    L2CAP(d): cid 0x0040 len 14 [psm 3]
	      RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
	      dlci 18 frame_type 0 credit_flow 14 pri 7 ack_timer 0
	      frame_size 1019 max_retrans 0 credits 0
	< ACL data: handle 12 flags 0x02 dlen 8
	    L2CAP(d): cid 0x0040 len 4 [psm 3]
	      RFCOMM(s): SABM: cr 1 dlci 18 pf 1 ilen 0 fcs 0x32
	> HCI Event: Number of Completed Packets (0x13) plen 5
	    handle 12 packets 2
	
	
	
	/* it takes seconds here outputing nothing */
	
	
	
	
	< ACL data: handle 12 flags 0x02 dlen 8
	    L2CAP(d): cid 0x0040 len 4 [psm 3]
	      RFCOMM(s): DISC: cr 1 dlci 18 pf 1 ilen 0 fcs 0xd3
	< ACL data: handle 12 flags 0x02 dlen 8
	    L2CAP(d): cid 0x0040 len 4 [psm 3]
	      RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
	< ACL data: handle 12 flags 0x02 dlen 12
	    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
	> ACL data: handle 12 flags 0x02 dlen 8
	    L2CAP(d): cid 0x0040 len 4 [psm 3]
	      RFCOMM(s): UA: cr 1 dlci 18 pf 1 ilen 0 fcs 0xf9
	> ACL data: handle 12 flags 0x02 dlen 8
	    L2CAP(d): cid 0x0040 len 4 [psm 3]
	      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
	> ACL data: handle 12 flags 0x02 dlen 12
	    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
	> HCI Event: Number of Completed Packets (0x13) plen 5
	    handle 12 packets 3
	< HCI Command: Disconnect (0x01|0x0006) plen 3
	    handle 12 reason 0x13
	    Reason: Remote User Terminated Connection
	> HCI Event: Command Status (0x0f) plen 4
	    Disconnect (0x01|0x0006) status 0x00 ncmd 1
	> HCI Event: Disconn Complete (0x05) plen 4
	    status 0x00 handle 12 reason 0x16
	    Reason: Connection Terminated by Local Host
	
The output of hciconfig -a is:
hci0:   Type: USB
        BD Address: 00:02:72:CA:DE:02 ACL MTU: 1017:8 SCO MTU: 64:0
        UP RUNNING PSCAN ISCAN
        RX bytes:71 acl:0 sco:0 events:8 errors:0
        TX bytes:31 acl:0 sco:0 commands:8 errors:0
        Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy:
        Link mode: SLAVE ACCEPT
        Name: 'BCM92045DG_Class1'
        Class: 0x000000
        Service Classes: Unspecified
        Device Class: Miscellaneous,
        HCI Ver: 2.0 (0x3) HCI Rev: 0x200a LMP Ver: 2.0 (0x3) LMP Subver: 0x4127
        Manufacturer: Broadcom Corporation (15)


Any tip or suggestion is welcome!
Thanks in advance!

-- 

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-12-06 17:26 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-30 14:12 [Bluez-users] bluez RFCOMM connect fail on arm platform amateur
2006-12-03 13:44 ` Marcel Holtmann
2006-12-06 17:26   ` amateur

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.