* drivers/net/netxen/: usage of uninitialized variables
@ 2006-12-13 13:07 Adrian Bunk
0 siblings, 0 replies; only message in thread
From: Adrian Bunk @ 2006-12-13 13:07 UTC (permalink / raw)
To: amitkale; +Cc: jgarzik, netdev, linux-kernel
The Coverity checker spotted the following places where variables are
being used uninitialized:
drivers/net/netxen/netxen_nic_ethtool.c:
<-- snip -->
...
static u32 netxen_nic_get_link(struct net_device *dev)
{
struct netxen_port *port = netdev_priv(dev);
struct netxen_adapter *adapter = port->adapter;
__le32 status;
/* read which mode */
if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
if (adapter->phy_read
&& adapter->phy_read(adapter, port->portnum,
NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
&status) != 0)
return -EIO;
else
return (netxen_get_phy_link(status));
...
<-- snip -->
"status" is not initiazlized if !adapter->phy_read.
drivers/net/netxen/netxen_nic_ethtool.c:
<-- snip -->
...
static int
netxen_nic_set_settings(struct net_device *dev, struct ethtool_cmd
*ecmd)
{
struct netxen_port *port = netdev_priv(dev);
struct netxen_adapter *adapter = port->adapter;
__le32 status;
/* read which mode */
if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
/* autonegotiation */
if (adapter->phy_write
&& adapter->phy_write(adapter, port->portnum,
NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
(__le32) ecmd->autoneg) != 0)
return -EIO;
else
port->link_autoneg = ecmd->autoneg;
if (adapter->phy_read
&& adapter->phy_read(adapter, port->portnum,
NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
&status) != 0)
return -EIO;
/* speed */
switch (ecmd->speed) {
case SPEED_10:
netxen_set_phy_speed(status, 0);
break;
case SPEED_100:
netxen_set_phy_speed(status, 1);
break;
case SPEED_1000:
netxen_set_phy_speed(status, 2);
break;
}
...
<-- snip -->
"status" is not initiazlized if !adapter->phy_read.
drivers/net/netxen/netxen_nic_isr.c:
<-- snip -->
void netxen_handle_port_int(struct netxen_adapter *adapter, u32 portno,
u32 enable)
{
__le32 int_src;
struct netxen_port *port;
/* This should clear the interrupt source */
if (adapter->phy_read)
adapter->phy_read(adapter, portno,
NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS,
&int_src);
if (int_src == 0) {
DPRINTK(INFO, "No phy interrupts for port #%d\n", portno);
return;
}
...
<-- snip -->
"int_src" is not initiazlized if !adapter->phy_read.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-12-13 13:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-13 13:07 drivers/net/netxen/: usage of uninitialized variables Adrian Bunk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.