All of lore.kernel.org
 help / color / mirror / Atom feed
* 2.6.19 (current from git) on SPARC64: Can't mount /
@ 2006-12-13 18:56 Horst H. von Brand
  2006-12-18  3:20   ` Adrian Bunk
  0 siblings, 1 reply; 7+ messages in thread
From: Horst H. von Brand @ 2006-12-13 18:56 UTC (permalink / raw)
  To: Linux Kernel Mailing List

I've been running kernel du jour straight from git on my SPARC Ultra 1 for
some time now on Aurora Corona (Fedora relative, development branch). For a
few days now 2.6.19 panics on boot, it can't mount /. 2.6.19 worked fine,
as does 2.6.19.1 (Aurora changed gcc, mkinitrd, ... in between, so I had to
rebuild a kernel to check if the problem lay elsewhere). Unpacking the
initrds for 2.6.19 and 2.6.19.1 shows the same (nash script) /init and the
same modules in both (ext3 + jbd, scsi_mod, sd_mod, esp, others).

I'm stumped. Any clue?
-- 
Dr. Horst H. von Brand                   User #22616 counter.li.org
Departamento de Informatica                    Fono: +56 32 2654431
Universidad Tecnica Federico Santa Maria             +56 32 2654239
Casilla 110-V, Valparaiso, Chile               Fax:  +56 32 2797513


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.19 (current from git) on SPARC64: Can't mount /
  2006-12-13 18:56 2.6.19 (current from git) on SPARC64: Can't mount / Horst H. von Brand
@ 2006-12-18  3:20   ` Adrian Bunk
  0 siblings, 0 replies; 7+ messages in thread
From: Adrian Bunk @ 2006-12-18  3:20 UTC (permalink / raw)
  To: Horst H. von Brand, davem; +Cc: Linux Kernel Mailing List, sparclinux

On Wed, Dec 13, 2006 at 03:56:46PM -0300, Horst H. von Brand wrote:
> I've been running kernel du jour straight from git on my SPARC Ultra 1 for
> some time now on Aurora Corona (Fedora relative, development branch). For a
> few days now 2.6.19 panics on boot, it can't mount /. 2.6.19 worked fine,
> as does 2.6.19.1 (Aurora changed gcc, mkinitrd, ... in between, so I had to
> rebuild a kernel to check if the problem lay elsewhere). Unpacking the
> initrds for 2.6.19 and 2.6.19.1 shows the same (nash script) /init and the
> same modules in both (ext3 + jbd, scsi_mod, sd_mod, esp, others).
> 
> I'm stumped. Any clue?

Is this issue still present in the latest -git?

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.19 (current from git) on SPARC64: Can't mount /
@ 2006-12-18  3:20   ` Adrian Bunk
  0 siblings, 0 replies; 7+ messages in thread
From: Adrian Bunk @ 2006-12-18  3:20 UTC (permalink / raw)
  To: Horst H. von Brand, davem; +Cc: Linux Kernel Mailing List, sparclinux

On Wed, Dec 13, 2006 at 03:56:46PM -0300, Horst H. von Brand wrote:
> I've been running kernel du jour straight from git on my SPARC Ultra 1 for
> some time now on Aurora Corona (Fedora relative, development branch). For a
> few days now 2.6.19 panics on boot, it can't mount /. 2.6.19 worked fine,
> as does 2.6.19.1 (Aurora changed gcc, mkinitrd, ... in between, so I had to
> rebuild a kernel to check if the problem lay elsewhere). Unpacking the
> initrds for 2.6.19 and 2.6.19.1 shows the same (nash script) /init and the
> same modules in both (ext3 + jbd, scsi_mod, sd_mod, esp, others).
> 
> I'm stumped. Any clue?

Is this issue still present in the latest -git?

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.19 (current from git) on SPARC64: Can't mount /
  2006-12-18  3:20   ` Adrian Bunk
@ 2006-12-18  3:29     ` Dennis Gilmore
  -1 siblings, 0 replies; 7+ messages in thread
From: Dennis Gilmore @ 2006-12-18  3:29 UTC (permalink / raw)
  To: Adrian Bunk
  Cc: Horst H. von Brand, davem, Linux Kernel Mailing List, sparclinux

Once upon a time Sunday 17 December 2006 9:20 pm, Adrian Bunk wrote:
> On Wed, Dec 13, 2006 at 03:56:46PM -0300, Horst H. von Brand wrote:
> > I've been running kernel du jour straight from git on my SPARC Ultra 1
> > for some time now on Aurora Corona (Fedora relative, development branch).
> > For a few days now 2.6.19 panics on boot, it can't mount /. 2.6.19 worked
> > fine, as does 2.6.19.1 (Aurora changed gcc, mkinitrd, ... in between, so
> > I had to rebuild a kernel to check if the problem lay elsewhere).
> > Unpacking the initrds for 2.6.19 and 2.6.19.1 shows the same (nash
> > script) /init and the same modules in both (ext3 + jbd, scsi_mod, sd_mod,
> > esp, others).
> >
> > I'm stumped. Any clue?
not 100% sure here.  Check the size of the initrd.  kinda sounds like an issue 
that hit rawhide last week that needed a new mkinitrd.  if its smaller grab 
the srpm from the Fedora Development tree for mkinitrd and rebuild it.  then 
recreate your initrd and see if that works.

Dennis

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.19 (current from git) on SPARC64: Can't mount /
@ 2006-12-18  3:29     ` Dennis Gilmore
  0 siblings, 0 replies; 7+ messages in thread
From: Dennis Gilmore @ 2006-12-18  3:29 UTC (permalink / raw)
  To: Adrian Bunk
  Cc: Horst H. von Brand, davem, Linux Kernel Mailing List, sparclinux

Once upon a time Sunday 17 December 2006 9:20 pm, Adrian Bunk wrote:
> On Wed, Dec 13, 2006 at 03:56:46PM -0300, Horst H. von Brand wrote:
> > I've been running kernel du jour straight from git on my SPARC Ultra 1
> > for some time now on Aurora Corona (Fedora relative, development branch).
> > For a few days now 2.6.19 panics on boot, it can't mount /. 2.6.19 worked
> > fine, as does 2.6.19.1 (Aurora changed gcc, mkinitrd, ... in between, so
> > I had to rebuild a kernel to check if the problem lay elsewhere).
> > Unpacking the initrds for 2.6.19 and 2.6.19.1 shows the same (nash
> > script) /init and the same modules in both (ext3 + jbd, scsi_mod, sd_mod,
> > esp, others).
> >
> > I'm stumped. Any clue?
not 100% sure here.  Check the size of the initrd.  kinda sounds like an issue 
that hit rawhide last week that needed a new mkinitrd.  if its smaller grab 
the srpm from the Fedora Development tree for mkinitrd and rebuild it.  then 
recreate your initrd and see if that works.

Dennis

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.19 (current from git) on SPARC64: Can't mount /
  2006-12-18  3:20   ` Adrian Bunk
@ 2006-12-27 20:38     ` Horst H. von Brand
  -1 siblings, 0 replies; 7+ messages in thread
From: Horst H. von Brand @ 2006-12-27 20:38 UTC (permalink / raw)
  To: Adrian Bunk
  Cc: Horst H. von Brand, davem, Linux Kernel Mailing List, sparclinux

Adrian Bunk <bunk@stusta.de> wrote:
> On Wed, Dec 13, 2006 at 03:56:46PM -0300, Horst H. von Brand wrote:
> > I've been running kernel du jour straight from git on my SPARC Ultra 1 for
> > some time now on Aurora Corona (Fedora relative, development branch). For a
> > few days now 2.6.19 panics on boot, it can't mount /. 2.6.19 worked fine,
> > as does 2.6.19.1 (Aurora changed gcc, mkinitrd, ... in between, so I had to
> > rebuild a kernel to check if the problem lay elsewhere). Unpacking the
> > initrds for 2.6.19 and 2.6.19.1 shows the same (nash script) /init and the
> > same modules in both (ext3 + jbd, scsi_mod, sd_mod, esp, others).

> > I'm stumped. Any clue?

> Is this issue still present in the latest -git?

Sorry, got sidetracked by other stuff.

Still no boot with 2.9.20-rc1 and -rc2, and none of the kernels I tried in
between.

initrd is sane (the only differences between the one built for working
2.6.19.1 and broken 2.6.20-rc2 are among the modules themselves). What I
did was:

  cd /tmp
  mkdir ird-$version
  cd ird-$version
  zcat /boot/initrd-$version.img | cpio -i

and then "diff -Nur ird-$1 ird-$2". Now to teach diff(1) to compare devices
reasonably...

Tried latest from Fedora rawhide (mkinitrd-6.0.6-1), no boot. initrd is
huge, so I went back to mkinitrd-5.1.19-1.
-- 
Dr. Horst H. von Brand                   User #22616 counter.li.org
Departamento de Informatica                    Fono: +56 32 2654431
Universidad Tecnica Federico Santa Maria             +56 32 2654239
Casilla 110-V, Valparaiso, Chile               Fax:  +56 32 2797513


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.19 (current from git) on SPARC64: Can't mount /
@ 2006-12-27 20:38     ` Horst H. von Brand
  0 siblings, 0 replies; 7+ messages in thread
From: Horst H. von Brand @ 2006-12-27 20:38 UTC (permalink / raw)
  To: Adrian Bunk
  Cc: Horst H. von Brand, davem, Linux Kernel Mailing List, sparclinux

Adrian Bunk <bunk@stusta.de> wrote:
> On Wed, Dec 13, 2006 at 03:56:46PM -0300, Horst H. von Brand wrote:
> > I've been running kernel du jour straight from git on my SPARC Ultra 1 for
> > some time now on Aurora Corona (Fedora relative, development branch). For a
> > few days now 2.6.19 panics on boot, it can't mount /. 2.6.19 worked fine,
> > as does 2.6.19.1 (Aurora changed gcc, mkinitrd, ... in between, so I had to
> > rebuild a kernel to check if the problem lay elsewhere). Unpacking the
> > initrds for 2.6.19 and 2.6.19.1 shows the same (nash script) /init and the
> > same modules in both (ext3 + jbd, scsi_mod, sd_mod, esp, others).

> > I'm stumped. Any clue?

> Is this issue still present in the latest -git?

Sorry, got sidetracked by other stuff.

Still no boot with 2.9.20-rc1 and -rc2, and none of the kernels I tried in
between.

initrd is sane (the only differences between the one built for working
2.6.19.1 and broken 2.6.20-rc2 are among the modules themselves). What I
did was:

  cd /tmp
  mkdir ird-$version
  cd ird-$version
  zcat /boot/initrd-$version.img | cpio -i

and then "diff -Nur ird-$1 ird-$2". Now to teach diff(1) to compare devices
reasonably...

Tried latest from Fedora rawhide (mkinitrd-6.0.6-1), no boot. initrd is
huge, so I went back to mkinitrd-5.1.19-1.
-- 
Dr. Horst H. von Brand                   User #22616 counter.li.org
Departamento de Informatica                    Fono: +56 32 2654431
Universidad Tecnica Federico Santa Maria             +56 32 2654239
Casilla 110-V, Valparaiso, Chile               Fax:  +56 32 2797513


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2006-12-27 20:40 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-13 18:56 2.6.19 (current from git) on SPARC64: Can't mount / Horst H. von Brand
2006-12-18  3:20 ` Adrian Bunk
2006-12-18  3:20   ` Adrian Bunk
2006-12-18  3:29   ` Dennis Gilmore
2006-12-18  3:29     ` Dennis Gilmore
2006-12-27 20:38   ` Horst H. von Brand
2006-12-27 20:38     ` Horst H. von Brand

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.