* [2.6.20-rc3] PATA_MARVELL: total machine freeze
@ 2007-01-02 14:37 Paolo Ornati
0 siblings, 0 replies; only message in thread
From: Paolo Ornati @ 2007-01-02 14:37 UTC (permalink / raw)
To: Linux Kernel Mailing List; +Cc: Alan
[-- Attachment #1: Type: text/plain, Size: 6010 bytes --]
Hello,
Hardware
MOBO Intel DG965SS (chipset G965 Express)
PATA CDRW LG GCE-8400B
I'm using PATA_MARVELL driver, and trying to burn a CD results in a
total machine freeze (no SysRq / no output over serial console).
The freeze doesn't happens immediately: the writing process stalls for
several seconds during which the machine works flawlessy.
I've found that even a simple "sdparm -a /dev/sr0" have the same
effect, so I've done an strace:
execve("/usr/bin/sdparm", ["sdparm", "-a", "/dev/sr0"], [/* 63 vars */]) = 0
brk(0) = 0x52c000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa0b3000
uname({sys="Linux", node="tux", ...}) = 0
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=129796, ...}) = 0
mmap(NULL, 129796, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2b3bfa0b4000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000\322\1"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1256568, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa0d4000
mmap(NULL, 2273448, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2b3bfa1b4000
mprotect(0x2b3bfa2d6000, 1048576, PROT_NONE) = 0
mmap(0x2b3bfa3d6000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x122000) = 0x2b3bfa3d6000
mmap(0x2b3bfa3db000, 16552, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa3db000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa3e0000
arch_prctl(ARCH_SET_FS, 0x2b3bfa3e06d0) = 0
mprotect(0x2b3bfa3d6000, 12288, PROT_READ) = 0
mprotect(0x2b3bfa1b2000, 4096, PROT_READ) = 0
munmap(0x2b3bfa0b4000, 129796) = 0
open("/dev/sr0", O_RDONLY|O_NONBLOCK) = 3
brk(0) = 0x52c000
brk(0x54d000) = 0x54d000
ioctl(3, SG_IO, 0x52c010) = 0
fstat(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 1), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa0b4000
write(1, " /dev/sr0: HL-DT-ST CD-RW GC"..., 57) = 57
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
write(1, "Read write error recovery mode p"..., 37) = 37
write(1, " AWRE 0 [cha: n, def: "..., 35) = 35
write(1, " ARRE 0 [cha: n, def: "..., 35) = 35
write(1, " TB 0 [cha: n, def: "..., 35) = 35
write(1, " RC 0 [cha: n, def: "..., 35) = 35
write(1, " EER 0 [cha: n, def: "..., 35) = 35
write(1, " PER 0 [cha: n, def: "..., 35) = 35
write(1, " DTE 0 [cha: n, def: "..., 35) = 35
write(1, " DCR 0 [cha: y, def: "..., 35) = 35
write(1, " RRC 32 [cha: y, def: 3"..., 35) = 35
write(1, " COR_S 0 [cha: n, def: "..., 35) = 35
write(1, " HOC 0 [cha: n, def: "..., 35) = 35
write(1, " DSOC 0 [cha: n, def: "..., 35) = 35
write(1, " EMCDR 0 [cha: n, def: "..., 35) = 35
write(1, " WRC 0 [cha: n, def: "..., 35) = 35
write(1, " ERTL 0 [cha: n, def: "..., 35) = 35
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
write(1, "Write parameters (MMC) mode page"..., 34) = 34
write(1, " BUFE 0 [cha: y, def: "..., 35) = 35
write(1, " LS_V 0 [cha: n, def: "..., 35) = 35
write(1, " TST_W 0 [cha: y, def: "..., 35) = 35
write(1, " WR_T 1 [cha: y, def: "..., 35) = 35
write(1, " MULTI_S 0 [cha: y, def: "..., 35) = 35
write(1, " FP 0 [cha: y, def: "..., 35) = 35
write(1, " COPY 0 [cha: y, def: "..., 35) = 35
write(1, " TRACK_M 4 [cha: y, def: "..., 35) = 35
write(1, " DBT 8 [cha: y, def: "..., 35) = 35
write(1, " LINK_S 0 [cha: n, def: "..., 35) = 35
write(1, " IAC 0 [cha: y, def: "..., 35) = 35
write(1, " SESS_F 0 [cha: y, def: "..., 35) = 35
write(1, " PACK_S 0 [cha: y, def: "..., 35) = 35
write(1, " APL 150 [cha: y, def:15"..., 35) = 35
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
write(1, "Protocol specific logical unit m"..., 42) = 42
write(1, " LUPID 0 [cha: n, def: "..., 35) = 35
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
write(1, "Power condition mode page:\n", 27) = 27
write(1, " IDLE 1 [cha: n, def: "..., 35) = 35
write(1, " STANDBY 1 [cha: n, def: "..., 35) = 35
write(1, " ICT 1200 [cha: n, def:1"..., 37) = 37
write(1, " SCT 2400 [cha: n, def:2"..., 37) = 37
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO
^^^^^^^^^^^^^^^^^^^
I don't know why the output is truncated that way... anyway, as said
before, the machine works for something like 30s after this (in the
above example it survived >60s).
dmesg / lspci / config attached
Any idea?
--
Paolo Ornati
Linux 2.6.20-rc3 on x86_64
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 26043 bytes --]
[ 0.000000] Linux version 2.6.20-rc3 (paolo@tux) (gcc version 4.1.1 (Gentoo 4.1.1-r1)) #46 SMP Tue Jan 2 10:46:33 CET 2007
[ 0.000000] Command line: root=/dev/sda6 video=intelfb:1024x768@60
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003e599000 (usable)
[ 0.000000] BIOS-e820: 000000003e599000 - 000000003e5a6000 (reserved)
[ 0.000000] BIOS-e820: 000000003e5a6000 - 000000003e655000 (usable)
[ 0.000000] BIOS-e820: 000000003e655000 - 000000003e6a6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e6a6000 - 000000003e6ab000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003e6ab000 - 000000003e6ac000 (usable)
[ 0.000000] BIOS-e820: 000000003e6ac000 - 000000003e6f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e6f2000 - 000000003e6ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003e6ff000 - 000000003e700000 (usable)
[ 0.000000] BIOS-e820: 000000003e700000 - 000000003f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 255385) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255398, 255573) 2 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255659, 255660) 3 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020
[ 0.000000] ACPI: RSDT (v001 INTEL DG965SS 0x00000629 0x01000013) @ 0x000000003e6fd038
[ 0.000000] ACPI: FADT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6fc000
[ 0.000000] ACPI: MADT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f6000
[ 0.000000] ACPI: WDDT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f5000
[ 0.000000] ACPI: MCFG (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f4000
[ 0.000000] ACPI: ASF! (v032 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f3000
[ 0.000000] ACPI: HPET (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f2000
[ 0.000000] ACPI: SSDT (v001 INTEL CpuPm 0x00000629 MSFT 0x01000013) @ 0x000000003e6aa000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a9000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a8000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a7000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a6000
[ 0.000000] ACPI: DSDT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x0000000000000000
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 255385) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255398, 255573) 2 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255659, 255660) 3 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0 -> 143
[ 0.000000] 0: 256 -> 255385
[ 0.000000] 0: 255398 -> 255573
[ 0.000000] 0: 255659 -> 255660
[ 0.000000] 0: 255743 -> 255744
[ 0.000000] On node 0 totalpages: 255449
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1186 pages reserved
[ 0.000000] DMA zone: 2741 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3440 pages used for memmap
[ 0.000000] DMA32 zone: 248026 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000008f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000
[ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000
[ 0.000000] Nosave address range: 000000003e599000 - 000000003e5a6000
[ 0.000000] Nosave address range: 000000003e655000 - 000000003e6a6000
[ 0.000000] Nosave address range: 000000003e6a6000 - 000000003e6ab000
[ 0.000000] Nosave address range: 000000003e6ac000 - 000000003e6f2000
[ 0.000000] Nosave address range: 000000003e6f2000 - 000000003e6ff000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f000000:c0f00000)
[ 0.000000] PERCPU: Allocating 32192 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 250767
[ 0.000000] Kernel command line: root=/dev/sda6 video=intelfb:1024x768@60
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 30.695838] Console: colour VGA+ 80x25
[ 30.698825] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 30.699246] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 30.699375] Checking aperture...
[ 30.709425] Memory: 998844k/1022976k available (2528k kernel code, 22412k reserved, 1477k data, 232k init)
[ 30.768911] Calibrating delay using timer specific routine.. 3732.22 BogoMIPS (lpj=1866110)
[ 30.769204] Mount-cache hash table entries: 256
[ 30.769519] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.769583] CPU: L2 cache: 2048K
[ 30.769625] using mwait in idle threads.
[ 30.769668] CPU: Physical Processor ID: 0
[ 30.769711] CPU: Processor Core ID: 0
[ 30.769759] CPU0: Thermal monitoring enabled (TM2)
[ 30.769816] Freeing SMP alternatives: 28k freed
[ 30.769876] ACPI: Core revision 20060707
[ 30.787318] Using local APIC timer interrupts.
[ 30.840977] result 16650039
[ 30.841018] Detected 16.650 MHz APIC timer.
[ 30.842418] Booting processor 1/2 APIC 0x1
[ 30.853049] Initializing CPU#1
[ 30.912874] Calibrating delay using timer specific routine.. 3729.65 BogoMIPS (lpj=1864828)
[ 30.912881] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.912883] CPU: L2 cache: 2048K
[ 30.912886] CPU: Physical Processor ID: 0
[ 30.912887] CPU: Processor Core ID: 1
[ 30.912894] CPU1: Thermal monitoring enabled (TM2)
[ 30.913233] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 30.913885] Brought up 2 CPUs
[ 30.914323] testing NMI watchdog ... OK.
[ 30.924395] time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
[ 30.924444] time.c: Detected 1864.805 MHz processor.
[ 30.970831] migration_cost=25
[ 30.971498] NET: Registered protocol family 16
[ 30.971717] ACPI: bus type pci registered
[ 30.971766] PCI: Using configuration type 1
[ 30.982561] ACPI: Interpreter enabled
[ 30.982605] ACPI: Using IOAPIC for interrupt routing
[ 30.983723] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 30.983771] PCI: Probing PCI hardware (bus 00)
[ 30.983802] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 30.986227] Boot video device is 0000:00:02.0
[ 30.986935] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 30.986985] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 30.987956] PCI: Transparent bridge - 0000:00:1e.0
[ 30.988065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 31.000280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 31.001963] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.002617] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 31.003278] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.003934] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.004594] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 31.005255] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 31.005913] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 31.006565] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.009995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 31.010531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 31.011077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 31.011612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 31.012153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 31.015799] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 31.015864] pnp: PnP ACPI init
[ 31.021767] pnp: PnP ACPI: found 13 devices
[ 31.022911] SCSI subsystem initialized
[ 31.023017] libata version 2.00 loaded.
[ 31.023140] usbcore: registered new interface driver usbfs
[ 31.023270] usbcore: registered new interface driver hub
[ 31.023408] usbcore: registered new device driver usb
[ 31.023596] PCI: Using ACPI for IRQ routing
[ 31.023640] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 31.023806] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 31.023930] hpet0: 3 64-bit timers, 14318180 Hz
[ 31.024989] PCI-GART: No AMD northbridge found.
[ 31.025165] pnp: 00:06: ioport range 0x500-0x53f has been reserved
[ 31.025215] pnp: 00:06: ioport range 0x400-0x47f could not be reserved
[ 31.025264] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
[ 31.026116] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 31.026166] PCI: Bridge: 0000:00:1c.0
[ 31.026208] IO window: disabled.
[ 31.026252] MEM window: 50400000-504fffff
[ 31.026297] PREFETCH window: disabled.
[ 31.026342] PCI: Bridge: 0000:00:1c.1
[ 31.026385] IO window: 2000-2fff
[ 31.026429] MEM window: 50100000-501fffff
[ 31.026475] PREFETCH window: disabled.
[ 31.026520] PCI: Bridge: 0000:00:1c.2
[ 31.026562] IO window: disabled.
[ 31.026606] MEM window: 50500000-505fffff
[ 31.026651] PREFETCH window: disabled.
[ 31.026696] PCI: Bridge: 0000:00:1c.3
[ 31.026737] IO window: disabled.
[ 31.026782] MEM window: 50600000-506fffff
[ 31.026827] PREFETCH window: disabled.
[ 31.026876] PCI: Bridge: 0000:00:1c.4
[ 31.026918] IO window: disabled.
[ 31.026962] MEM window: 50700000-507fffff
[ 31.027007] PREFETCH window: disabled.
[ 31.027052] PCI: Bridge: 0000:00:1e.0
[ 31.027095] IO window: 1000-1fff
[ 31.027140] MEM window: 50000000-500fffff
[ 31.027184] PREFETCH window: disabled.
[ 31.027246] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 31.027334] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 31.027349] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 31.027435] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 31.027451] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 31.027537] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 31.027552] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 31.027638] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 31.027652] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 31.027739] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 31.027748] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 31.027819] NET: Registered protocol family 2
[ 31.040181] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 31.040510] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 31.041444] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 31.042143] TCP: Hash tables configured (established 131072 bind 65536)
[ 31.042193] TCP reno registered
[ 31.045808] checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
[ 31.048307] Freeing initrd memory: 2000k freed
[ 31.050066] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 31.051776] fuse init (API version 7.8)
[ 31.052029] io scheduler noop registered
[ 31.052121] io scheduler cfq registered (default)
[ 31.052905] input: Power Button (FF) as /class/input/input0
[ 31.052953] ACPI: Power Button (FF) [PWRF]
[ 31.053121] input: Sleep Button (CM) as /class/input/input1
[ 31.053174] ACPI: Sleep Button (CM) [SLPB]
[ 31.053609] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 31.053804] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 31.053895] ACPI: Getting cpuindex for acpiid 0x3
[ 31.053944] ACPI: Getting cpuindex for acpiid 0x4
[ 31.060298] Real Time Clock Driver v1.12ac
[ 31.060450] hpet_resources: 0xfed00000 is busy
[ 31.060456] Linux agpgart interface v0.101 (c) Dave Jones
[ 31.060584] agpgart: Detected an Intel 965G Chipset.
[ 31.063093] agpgart: Detected 7676K stolen memory.
[ 31.075915] agpgart: AGP aperture is 512M @ 0x40000000
[ 31.076011] [drm] Initialized drm 1.1.0 20060810
[ 31.076078] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.076290] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 31.076338] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
[ 31.076409] intelfb: Version 0.9.4
[ 31.076533] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 31.076770] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.077661] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.078009] Floppy drive(s): fd0 is 1.44M
[ 31.092438] FDC 0 is a National Semiconductor PC87306
[ 31.095086] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 31.095941] loop: loaded (max 8 devices)
[ 31.095984] Intel(R) PRO/10GbE Network Driver - version 1.0.117-k2
[ 31.096032] Copyright (c) 1999-2006 Intel Corporation.
[ 31.096660] 8139too Fast Ethernet driver 0.9.28
[ 31.096726] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 31.097207] eth0: RealTek RTL8139 at 0xffffc2000000e000, 00:e0:4c:f0:a9:84, IRQ 21
[ 31.097274] eth0: Identified 8139 chip type 'RTL-8139C'
[ 31.097279] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 31.097328] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 31.097521] Probing IDE interface ide0...
[ 31.610694] Probing IDE interface ide1...
[ 32.124312] ahci 0000:00:1f.2: version 2.0
[ 32.124325] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 33.125036] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 33.125042] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 33.125113] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 33.125320] ata1: SATA max UDMA/133 cmd 0xFFFFC20000024100 ctl 0x0 bmdma 0x0 irq 19
[ 33.125488] ata2: SATA max UDMA/133 cmd 0xFFFFC20000024180 ctl 0x0 bmdma 0x0 irq 19
[ 33.125625] ata3: DUMMY
[ 33.125734] ata4: DUMMY
[ 33.125877] ata5: SATA max UDMA/133 cmd 0xFFFFC20000024300 ctl 0x0 bmdma 0x0 irq 19
[ 33.126047] ata6: SATA max UDMA/133 cmd 0xFFFFC20000024380 ctl 0x0 bmdma 0x0 irq 19
[ 33.126124] scsi0 : ahci
[ 33.584213] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 33.585522] ata1.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
[ 33.586989] ata1.00: configured for UDMA/133
[ 33.587039] scsi1 : ahci
[ 33.889314] ata2: SATA link down (SStatus 0 SControl 300)
[ 33.889368] scsi2 : ahci
[ 33.889520] scsi3 : ahci
[ 33.889656] scsi4 : ahci
[ 34.192407] ata5: SATA link down (SStatus 0 SControl 300)
[ 34.192462] scsi5 : ahci
[ 34.495480] ata6: SATA link down (SStatus 0 SControl 300)
[ 34.495671] scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
[ 34.495990] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 34.496050] sda: Write Protect is off
[ 34.496093] sda: Mode Sense: 00 3a 00 00
[ 34.496116] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.496249] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 34.496309] sda: Write Protect is off
[ 34.496351] sda: Mode Sense: 00 3a 00 00
[ 34.496374] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.496466] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 34.550843] sd 0:0:0:0: Attached scsi disk sda
[ 34.551052] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 34.551222] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.551325] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 34.551399] ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2026 bmdma 0x2000 irq 17
[ 34.551460] scsi6 : pata_marvell
[ 34.551614] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
[ 34.858084] ata7.00: ATAPI, max MWDMA2
[ 35.013190] ata7.00: configured for MWDMA2
[ 35.013501] scsi 6:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8400B 1.03 PQ: 0 ANSI: 5
[ 35.016392] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 35.016445] Uniform CD-ROM driver Revision: 3.20
[ 35.016644] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 35.016805] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 35.016962] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 35.017057] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 35.017060] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 35.017212] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 35.017335] ehci_hcd 0000:00:1a.7: debug port 1
[ 35.017383] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 35.017396] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x50325c00
[ 35.021323] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 35.021660] usb usb1: configuration #1 chosen from 1 choice
[ 35.021803] hub 1-0:1.0: USB hub found
[ 35.021853] hub 1-0:1.0: 4 ports detected
[ 35.122200] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 35.122295] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 35.122298] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 35.122440] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 35.122561] ehci_hcd 0000:00:1d.7: debug port 1
[ 35.122608] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 35.122617] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50325800
[ 35.126553] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 35.126849] usb usb2: configuration #1 chosen from 1 choice
[ 35.126992] hub 2-0:1.0: USB hub found
[ 35.127042] hub 2-0:1.0: 6 ports detected
[ 35.228192] USB Universal Host Controller Interface driver v3.0
[ 35.228357] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.228448] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 35.228451] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 35.228579] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 35.228675] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
[ 35.229004] usb usb3: configuration #1 chosen from 1 choice
[ 35.229147] hub 3-0:1.0: USB hub found
[ 35.229197] hub 3-0:1.0: 2 ports detected
[ 35.330216] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 35.330308] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 35.330311] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 35.330452] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 35.330546] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
[ 35.330866] usb usb4: configuration #1 chosen from 1 choice
[ 35.331016] hub 4-0:1.0: USB hub found
[ 35.331066] hub 4-0:1.0: 2 ports detected
[ 35.432238] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 35.432329] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 35.432332] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 35.432479] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 35.432569] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 35.432882] usb usb5: configuration #1 chosen from 1 choice
[ 35.433026] hub 5-0:1.0: USB hub found
[ 35.433076] hub 5-0:1.0: 2 ports detected
[ 35.534251] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 35.534342] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 35.534345] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 35.534489] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 35.534580] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 35.534905] usb usb6: configuration #1 chosen from 1 choice
[ 35.535045] hub 6-0:1.0: USB hub found
[ 35.535097] hub 6-0:1.0: 2 ports detected
[ 35.636320] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 35.636420] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 35.636423] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 35.636585] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 35.636675] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 35.636995] usb usb7: configuration #1 chosen from 1 choice
[ 35.637149] hub 7-0:1.0: USB hub found
[ 35.637199] hub 7-0:1.0: 2 ports detected
[ 35.738468] usbcore: registered new interface driver cdc_acm
[ 35.738519] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 35.738675] usbcore: registered new interface driver usblp
[ 35.738723] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 35.738775] Initializing USB Mass Storage driver...
[ 35.738893] usbcore: registered new interface driver usb-storage
[ 35.738941] USB Mass Storage support registered.
[ 35.739163] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 35.742158] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 35.742206] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 35.742393] mice: PS/2 mouse device common for all mice
[ 35.742801] i2c /dev entries driver
[ 35.743009] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21
[ 35.763620] EDAC MC: Ver: 2.0.1 Jan 1 2007
[ 35.764033] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Wed Dec 20 08:11:48 2006 UTC).
[ 35.764808] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 35.764908] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 35.886596] ALSA device list:
[ 35.886644] #0: HDA Intel at 0x50320000 irq 22
[ 35.886718] nf_conntrack version 0.5.0 (3996 buckets, 31968 max)
[ 35.886890] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.928506] TCP cubic registered
[ 35.928567] NET: Registered protocol family 1
[ 35.928629] NET: Registered protocol family 17
[ 35.930585] NET: Registered protocol family 15
[ 36.463434] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[ 36.486984] input: AT Translated Set 2 keyboard as /class/input/input3
[ 36.538215] RAMDISK: ext2 filesystem found at block 0
[ 36.538269] RAMDISK: Loading 2000KiB [1 disk] into ram disk... |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\bdone.
[ 36.544842] VFS: Mounted root (ext2 filesystem).
[ 36.566730] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 36.566733] EXT3-fs: write access will be enabled during recovery.
[ 36.607168] kjournald starting. Commit interval 5 seconds
[ 36.607180] EXT3-fs: recovery complete.
[ 36.607634] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.607751] VFS: Mounted root (ext3 filesystem) readonly.
[ 36.607754] Trying to move old root to /initrd ... /initrd does not exist. Ignored.
[ 36.611497] Unmounting old root
[ 36.611708] Trying to free ramdisk memory ... okay
[ 36.612004] Freeing unused kernel memory: 232k freed
[ 41.326389] EXT3 FS on sda6, internal journal
[ 44.093173] kjournald starting. Commit interval 5 seconds
[ 44.093377] EXT3 FS on sda8, internal journal
[ 44.093381] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.161756] Adding 1004016k swap on /dev/sda7. Priority:-1 extents:1 across:1004016k
[ 65.317093] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 330.980512] Machine check events logged
[ 434.698062] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 434.715801] ISO 9660 Extensions: RRIP_1991A
[-- Attachment #3: lspci.txt --]
[-- Type: text/plain, Size: 1677 bytes --]
00:00.0 Host bridge: Intel Corporation Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation HECI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation Ethernet Controller (rev 02)
00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation SATA Controller AHCI (rev 02)
00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02)
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
[-- Attachment #4: config.gz --]
[-- Type: application/x-gzip, Size: 9039 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-01-01 14:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-01-02 14:37 [2.6.20-rc3] PATA_MARVELL: total machine freeze Paolo Ornati
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.