* Re: atiixp.c: add cable detection support for ATI IDE
[not found] <200701301859.l0UIxaqX025758@hera.kernel.org>
@ 2007-01-30 22:37 ` Alan
0 siblings, 0 replies; only message in thread
From: Alan @ 2007-01-30 22:37 UTC (permalink / raw)
To: Linux Kernel Mailing List; +Cc: conke.hu
> IDE HDD does not work if it uses a 40-pin PATA cable on ATI chipset.
> This patch fixes the bug.
>
> Signed-off-by: Conke Hu <conke.hu@amd.com>
Doe this actually work if the driver is loaded after a suspend to ram and
resume ?
> - hwif->udma_four = 1;
> + pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
> + if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
> + hwif->udma_four = 1;
> + else
> + hwif->udma_four = 0;
> +
How does the actual cable detection work rather than relying on the BIOS
modes to guess the cable ?
Alan
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-01-30 22:25 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <200701301859.l0UIxaqX025758@hera.kernel.org>
2007-01-30 22:37 ` atiixp.c: add cable detection support for ATI IDE Alan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.