From: David Brownell <david-b@pacbell.net>
To: rtc-linux@googlegroups.com
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>,
john stultz <johnstul@us.ibm.com>,
Andrew Morton <akpm@linux-foundation.org>,
linux-pm@lists.osdl.org,
Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: [patch 6/6] rtc suspend()/resume() restores system clock
Date: Wed, 21 Feb 2007 19:50:21 -0800 [thread overview]
Message-ID: <200702211950.22422.david-b@pacbell.net> (raw)
In-Reply-To: <200702211929.17203.david-b@pacbell.net>
RTC class suspend/resume support, re-initializing the system clock on resume
from the clock used to initialize it at boot time.
- Inlining the same code used by ARM, which saves and restores the
delta between a selected RTC and the current system wall-clock time.
- Removes calls to that ARM code from AT91, OMAP, and S3C RTCs.
This goes on top of the patch series removing "struct class_device" usage
from the RTC framework. That makes class suspend()/resume() work.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
drivers/rtc/Kconfig | 24 +++++++++----
drivers/rtc/class.c | 74 +++++++++++++++++++++++++++++++++++++++++++
drivers/rtc/rtc-at91rm9200.c | 30 -----------------
drivers/rtc/rtc-omap.c | 17 ---------
drivers/rtc/rtc-s3c.c | 22 ------------
5 files changed, 91 insertions(+), 76 deletions(-)
Index: at91/drivers/rtc/Kconfig
===================================================================
--- at91.orig/drivers/rtc/Kconfig 2007-02-21 18:47:38.000000000 -0800
+++ at91/drivers/rtc/Kconfig 2007-02-21 18:47:41.000000000 -0800
@@ -21,21 +21,31 @@ config RTC_CLASS
will be called rtc-class.
config RTC_HCTOSYS
- bool "Set system time from RTC on startup"
+ bool "Set system time from RTC on startup and resume"
depends on RTC_CLASS = y
default y
help
- If you say yes here, the system time will be set using
- the value read from the specified RTC device. This is useful
- in order to avoid unnecessary fsck runs.
+ If you say yes here, the system time (wall clock) will be set using
+ the value read from a specified RTC device. This is useful to avoid
+ unnecessary fsck runs at boot time, and to network better.
config RTC_HCTOSYS_DEVICE
- string "The RTC to read the time from"
+ string "RTC used to set the system time"
depends on RTC_HCTOSYS = y
default "rtc0"
help
- The RTC device that will be used as the source for
- the system time, usually rtc0.
+ The RTC device that will be used to (re)initialize the system
+ clock, usually rtc0. Initialization is done when the system
+ starts up, and when it resumes from a low power state.
+
+ This clock should be battery-backed, so that it reads the correct
+ time when the system boots from a power-off state. Otherwise, your
+ system will need an external clock source (like an NTP server).
+
+ If the clock you specify here is not battery backed, it may still
+ be useful to reinitialize system time when resuming from system
+ sleep states. Do not specify an RTC here unless it stays powered
+ during all this system's supported sleep states.
config RTC_DEBUG
bool "RTC debug support"
Index: at91/drivers/rtc/class.c
===================================================================
--- at91.orig/drivers/rtc/class.c 2007-02-21 18:47:39.000000000 -0800
+++ at91/drivers/rtc/class.c 2007-02-21 18:47:41.000000000 -0800
@@ -32,6 +32,78 @@ static void rtc_device_release(struct de
kfree(rtc);
}
+#if defined(CONFIG_PM) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
+
+/*
+ * On suspend(), measure the delta between one RTC and the
+ * system's wall clock; restore it on resume().
+ */
+
+static struct timespec delta;
+static time_t oldtime;
+
+static int rtc_suspend(struct device *dev, pm_message_t mesg)
+{
+ struct rtc_device *rtc = to_rtc_device(dev);
+ struct rtc_time tm;
+
+ if (strncmp(rtc->dev.bus_id,
+ CONFIG_RTC_HCTOSYS_DEVICE,
+ BUS_ID_SIZE) != 0)
+ return 0;
+
+ rtc_read_time(rtc, &tm);
+ rtc_tm_to_time(&tm, &oldtime);
+
+ /* RTC precision is 1 second; adjust delta for avg 1/2 sec err */
+ set_normalized_timespec(&delta,
+ xtime.tv_sec - oldtime,
+ xtime.tv_nsec - (NSEC_PER_SEC >> 1));
+
+ return 0;
+}
+
+static int rtc_resume(struct device *dev)
+{
+ struct rtc_device *rtc = to_rtc_device(dev);
+ struct rtc_time tm;
+ time_t newtime;
+ struct timespec time;
+
+ if (strncmp(rtc->dev.bus_id,
+ CONFIG_RTC_HCTOSYS_DEVICE,
+ BUS_ID_SIZE) != 0)
+ return 0;
+
+ rtc_read_time(rtc, &tm);
+ if (rtc_valid_tm(&tm) != 0) {
+ pr_debug("%s: bogus resume time\n", rtc->dev.bus_id);
+ return 0;
+ }
+ rtc_tm_to_time(&tm, &newtime);
+ if (newtime <= oldtime) {
+ if (newtime < oldtime)
+ pr_debug("%s: time travel!\n", rtc->dev.bus_id);
+ return 0;
+ }
+
+ /* restore wall clock using delta against this RTC;
+ * adjust again for avg 1/2 second RTC sampling error
+ */
+ set_normalized_timespec(&time,
+ newtime + delta.tv_sec,
+ (NSEC_PER_SEC >> 1) + delta.tv_nsec);
+ do_settimeofday(&time);
+
+ return 0;
+}
+
+#else
+#define rtc_suspend NULL
+#define rtc_resume NULL
+#endif
+
+
/**
* rtc_device_register - register w/ RTC class
* @dev: the device to register
@@ -138,6 +210,8 @@ static int __init rtc_init(void)
printk(KERN_ERR "%s: couldn't create class\n", __FILE__);
return PTR_ERR(rtc_class);
}
+ rtc_class->suspend = rtc_suspend;
+ rtc_class->resume = rtc_resume;
rtc_dev_init();
rtc_sysfs_init(rtc_class);
return 0;
Index: at91/drivers/rtc/rtc-at91rm9200.c
===================================================================
--- at91.orig/drivers/rtc/rtc-at91rm9200.c 2007-02-21 18:47:26.000000000 -0800
+++ at91/drivers/rtc/rtc-at91rm9200.c 2007-02-21 18:47:41.000000000 -0800
@@ -348,21 +348,10 @@ static int __exit at91_rtc_remove(struct
/* AT91RM9200 RTC Power management control */
-static struct timespec at91_rtc_delta;
static u32 at91_rtc_imr;
static int at91_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct rtc_time tm;
- struct timespec time;
-
- time.tv_nsec = 0;
-
- /* calculate time delta for suspend */
- at91_rtc_readtime(&pdev->dev, &tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- save_time_delta(&at91_rtc_delta, &time);
-
/* this IRQ is shared with DBGU and other hardware which isn't
* necessarily doing PM like we are...
*/
@@ -374,36 +363,17 @@ static int at91_rtc_suspend(struct platf
else
at91_sys_write(AT91_RTC_IDR, at91_rtc_imr);
}
-
- pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
- 1900 + tm.tm_year, tm.tm_mon, tm.tm_mday,
- tm.tm_hour, tm.tm_min, tm.tm_sec);
-
return 0;
}
static int at91_rtc_resume(struct platform_device *pdev)
{
- struct rtc_time tm;
- struct timespec time;
-
- time.tv_nsec = 0;
-
- at91_rtc_readtime(&pdev->dev, &tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- restore_time_delta(&at91_rtc_delta, &time);
-
if (at91_rtc_imr) {
if (device_may_wakeup(&pdev->dev))
disable_irq_wake(AT91_ID_SYS);
else
at91_sys_write(AT91_RTC_IER, at91_rtc_imr);
}
-
- pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
- 1900 + tm.tm_year, tm.tm_mon, tm.tm_mday,
- tm.tm_hour, tm.tm_min, tm.tm_sec);
-
return 0;
}
#else
Index: at91/drivers/rtc/rtc-omap.c
===================================================================
--- at91.orig/drivers/rtc/rtc-omap.c 2007-02-21 18:47:39.000000000 -0800
+++ at91/drivers/rtc/rtc-omap.c 2007-02-21 18:47:41.000000000 -0800
@@ -488,19 +488,10 @@ static int __devexit omap_rtc_remove(str
#ifdef CONFIG_PM
-static struct timespec rtc_delta;
static u8 irqstat;
static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct rtc_time rtc_tm;
- struct timespec time;
-
- time.tv_nsec = 0;
- omap_rtc_read_time(NULL, &rtc_tm);
- rtc_tm_to_time(&rtc_tm, &time.tv_sec);
-
- save_time_delta(&rtc_delta, &time);
irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);
/* FIXME the RTC alarm is not currently acting as a wakeup event
@@ -517,14 +508,6 @@ static int omap_rtc_suspend(struct platf
static int omap_rtc_resume(struct platform_device *pdev)
{
- struct rtc_time rtc_tm;
- struct timespec time;
-
- time.tv_nsec = 0;
- omap_rtc_read_time(NULL, &rtc_tm);
- rtc_tm_to_time(&rtc_tm, &time.tv_sec);
-
- restore_time_delta(&rtc_delta, &time);
if (device_may_wakeup(&pdev->dev))
disable_irq_wake(omap_rtc_alarm);
else
Index: at91/drivers/rtc/rtc-s3c.c
===================================================================
--- at91.orig/drivers/rtc/rtc-s3c.c 2007-02-21 18:47:26.000000000 -0800
+++ at91/drivers/rtc/rtc-s3c.c 2007-02-21 18:47:41.000000000 -0800
@@ -548,37 +548,15 @@ static int ticnt_save;
static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct rtc_time tm;
- struct timespec time;
-
- time.tv_nsec = 0;
-
/* save TICNT for anyone using periodic interrupts */
-
ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT);
-
- /* calculate time delta for suspend */
-
- s3c_rtc_gettime(&pdev->dev, &tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- save_time_delta(&s3c_rtc_delta, &time);
s3c_rtc_enable(pdev, 0);
-
return 0;
}
static int s3c_rtc_resume(struct platform_device *pdev)
{
- struct rtc_time tm;
- struct timespec time;
-
- time.tv_nsec = 0;
-
s3c_rtc_enable(pdev, 1);
- s3c_rtc_gettime(&pdev->dev, &tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- restore_time_delta(&s3c_rtc_delta, &time);
-
writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
return 0;
}
WARNING: multiple messages have this Message-ID (diff)
From: David Brownell <david-b@pacbell.net>
To: rtc-linux@googlegroups.com
Cc: Linux Kernel list <linux-kernel@vger.kernel.org>,
linux-pm@lists.osdl.org, Greg KH <greg@kroah.com>,
Andrew Morton <akpm@linux-foundation.org>,
Alessandro Zummo <alessandro.zummo@towertech.it>,
john stultz <johnstul@us.ibm.com>
Subject: [patch 6/6] rtc suspend()/resume() restores system clock
Date: Wed, 21 Feb 2007 19:50:21 -0800 [thread overview]
Message-ID: <200702211950.22422.david-b@pacbell.net> (raw)
In-Reply-To: <200702211929.17203.david-b@pacbell.net>
RTC class suspend/resume support, re-initializing the system clock on resume
from the clock used to initialize it at boot time.
- Inlining the same code used by ARM, which saves and restores the
delta between a selected RTC and the current system wall-clock time.
- Removes calls to that ARM code from AT91, OMAP, and S3C RTCs.
This goes on top of the patch series removing "struct class_device" usage
from the RTC framework. That makes class suspend()/resume() work.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
drivers/rtc/Kconfig | 24 +++++++++----
drivers/rtc/class.c | 74 +++++++++++++++++++++++++++++++++++++++++++
drivers/rtc/rtc-at91rm9200.c | 30 -----------------
drivers/rtc/rtc-omap.c | 17 ---------
drivers/rtc/rtc-s3c.c | 22 ------------
5 files changed, 91 insertions(+), 76 deletions(-)
Index: at91/drivers/rtc/Kconfig
===================================================================
--- at91.orig/drivers/rtc/Kconfig 2007-02-21 18:47:38.000000000 -0800
+++ at91/drivers/rtc/Kconfig 2007-02-21 18:47:41.000000000 -0800
@@ -21,21 +21,31 @@ config RTC_CLASS
will be called rtc-class.
config RTC_HCTOSYS
- bool "Set system time from RTC on startup"
+ bool "Set system time from RTC on startup and resume"
depends on RTC_CLASS = y
default y
help
- If you say yes here, the system time will be set using
- the value read from the specified RTC device. This is useful
- in order to avoid unnecessary fsck runs.
+ If you say yes here, the system time (wall clock) will be set using
+ the value read from a specified RTC device. This is useful to avoid
+ unnecessary fsck runs at boot time, and to network better.
config RTC_HCTOSYS_DEVICE
- string "The RTC to read the time from"
+ string "RTC used to set the system time"
depends on RTC_HCTOSYS = y
default "rtc0"
help
- The RTC device that will be used as the source for
- the system time, usually rtc0.
+ The RTC device that will be used to (re)initialize the system
+ clock, usually rtc0. Initialization is done when the system
+ starts up, and when it resumes from a low power state.
+
+ This clock should be battery-backed, so that it reads the correct
+ time when the system boots from a power-off state. Otherwise, your
+ system will need an external clock source (like an NTP server).
+
+ If the clock you specify here is not battery backed, it may still
+ be useful to reinitialize system time when resuming from system
+ sleep states. Do not specify an RTC here unless it stays powered
+ during all this system's supported sleep states.
config RTC_DEBUG
bool "RTC debug support"
Index: at91/drivers/rtc/class.c
===================================================================
--- at91.orig/drivers/rtc/class.c 2007-02-21 18:47:39.000000000 -0800
+++ at91/drivers/rtc/class.c 2007-02-21 18:47:41.000000000 -0800
@@ -32,6 +32,78 @@ static void rtc_device_release(struct de
kfree(rtc);
}
+#if defined(CONFIG_PM) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
+
+/*
+ * On suspend(), measure the delta between one RTC and the
+ * system's wall clock; restore it on resume().
+ */
+
+static struct timespec delta;
+static time_t oldtime;
+
+static int rtc_suspend(struct device *dev, pm_message_t mesg)
+{
+ struct rtc_device *rtc = to_rtc_device(dev);
+ struct rtc_time tm;
+
+ if (strncmp(rtc->dev.bus_id,
+ CONFIG_RTC_HCTOSYS_DEVICE,
+ BUS_ID_SIZE) != 0)
+ return 0;
+
+ rtc_read_time(rtc, &tm);
+ rtc_tm_to_time(&tm, &oldtime);
+
+ /* RTC precision is 1 second; adjust delta for avg 1/2 sec err */
+ set_normalized_timespec(&delta,
+ xtime.tv_sec - oldtime,
+ xtime.tv_nsec - (NSEC_PER_SEC >> 1));
+
+ return 0;
+}
+
+static int rtc_resume(struct device *dev)
+{
+ struct rtc_device *rtc = to_rtc_device(dev);
+ struct rtc_time tm;
+ time_t newtime;
+ struct timespec time;
+
+ if (strncmp(rtc->dev.bus_id,
+ CONFIG_RTC_HCTOSYS_DEVICE,
+ BUS_ID_SIZE) != 0)
+ return 0;
+
+ rtc_read_time(rtc, &tm);
+ if (rtc_valid_tm(&tm) != 0) {
+ pr_debug("%s: bogus resume time\n", rtc->dev.bus_id);
+ return 0;
+ }
+ rtc_tm_to_time(&tm, &newtime);
+ if (newtime <= oldtime) {
+ if (newtime < oldtime)
+ pr_debug("%s: time travel!\n", rtc->dev.bus_id);
+ return 0;
+ }
+
+ /* restore wall clock using delta against this RTC;
+ * adjust again for avg 1/2 second RTC sampling error
+ */
+ set_normalized_timespec(&time,
+ newtime + delta.tv_sec,
+ (NSEC_PER_SEC >> 1) + delta.tv_nsec);
+ do_settimeofday(&time);
+
+ return 0;
+}
+
+#else
+#define rtc_suspend NULL
+#define rtc_resume NULL
+#endif
+
+
/**
* rtc_device_register - register w/ RTC class
* @dev: the device to register
@@ -138,6 +210,8 @@ static int __init rtc_init(void)
printk(KERN_ERR "%s: couldn't create class\n", __FILE__);
return PTR_ERR(rtc_class);
}
+ rtc_class->suspend = rtc_suspend;
+ rtc_class->resume = rtc_resume;
rtc_dev_init();
rtc_sysfs_init(rtc_class);
return 0;
Index: at91/drivers/rtc/rtc-at91rm9200.c
===================================================================
--- at91.orig/drivers/rtc/rtc-at91rm9200.c 2007-02-21 18:47:26.000000000 -0800
+++ at91/drivers/rtc/rtc-at91rm9200.c 2007-02-21 18:47:41.000000000 -0800
@@ -348,21 +348,10 @@ static int __exit at91_rtc_remove(struct
/* AT91RM9200 RTC Power management control */
-static struct timespec at91_rtc_delta;
static u32 at91_rtc_imr;
static int at91_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct rtc_time tm;
- struct timespec time;
-
- time.tv_nsec = 0;
-
- /* calculate time delta for suspend */
- at91_rtc_readtime(&pdev->dev, &tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- save_time_delta(&at91_rtc_delta, &time);
-
/* this IRQ is shared with DBGU and other hardware which isn't
* necessarily doing PM like we are...
*/
@@ -374,36 +363,17 @@ static int at91_rtc_suspend(struct platf
else
at91_sys_write(AT91_RTC_IDR, at91_rtc_imr);
}
-
- pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
- 1900 + tm.tm_year, tm.tm_mon, tm.tm_mday,
- tm.tm_hour, tm.tm_min, tm.tm_sec);
-
return 0;
}
static int at91_rtc_resume(struct platform_device *pdev)
{
- struct rtc_time tm;
- struct timespec time;
-
- time.tv_nsec = 0;
-
- at91_rtc_readtime(&pdev->dev, &tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- restore_time_delta(&at91_rtc_delta, &time);
-
if (at91_rtc_imr) {
if (device_may_wakeup(&pdev->dev))
disable_irq_wake(AT91_ID_SYS);
else
at91_sys_write(AT91_RTC_IER, at91_rtc_imr);
}
-
- pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
- 1900 + tm.tm_year, tm.tm_mon, tm.tm_mday,
- tm.tm_hour, tm.tm_min, tm.tm_sec);
-
return 0;
}
#else
Index: at91/drivers/rtc/rtc-omap.c
===================================================================
--- at91.orig/drivers/rtc/rtc-omap.c 2007-02-21 18:47:39.000000000 -0800
+++ at91/drivers/rtc/rtc-omap.c 2007-02-21 18:47:41.000000000 -0800
@@ -488,19 +488,10 @@ static int __devexit omap_rtc_remove(str
#ifdef CONFIG_PM
-static struct timespec rtc_delta;
static u8 irqstat;
static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct rtc_time rtc_tm;
- struct timespec time;
-
- time.tv_nsec = 0;
- omap_rtc_read_time(NULL, &rtc_tm);
- rtc_tm_to_time(&rtc_tm, &time.tv_sec);
-
- save_time_delta(&rtc_delta, &time);
irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);
/* FIXME the RTC alarm is not currently acting as a wakeup event
@@ -517,14 +508,6 @@ static int omap_rtc_suspend(struct platf
static int omap_rtc_resume(struct platform_device *pdev)
{
- struct rtc_time rtc_tm;
- struct timespec time;
-
- time.tv_nsec = 0;
- omap_rtc_read_time(NULL, &rtc_tm);
- rtc_tm_to_time(&rtc_tm, &time.tv_sec);
-
- restore_time_delta(&rtc_delta, &time);
if (device_may_wakeup(&pdev->dev))
disable_irq_wake(omap_rtc_alarm);
else
Index: at91/drivers/rtc/rtc-s3c.c
===================================================================
--- at91.orig/drivers/rtc/rtc-s3c.c 2007-02-21 18:47:26.000000000 -0800
+++ at91/drivers/rtc/rtc-s3c.c 2007-02-21 18:47:41.000000000 -0800
@@ -548,37 +548,15 @@ static int ticnt_save;
static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct rtc_time tm;
- struct timespec time;
-
- time.tv_nsec = 0;
-
/* save TICNT for anyone using periodic interrupts */
-
ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT);
-
- /* calculate time delta for suspend */
-
- s3c_rtc_gettime(&pdev->dev, &tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- save_time_delta(&s3c_rtc_delta, &time);
s3c_rtc_enable(pdev, 0);
-
return 0;
}
static int s3c_rtc_resume(struct platform_device *pdev)
{
- struct rtc_time tm;
- struct timespec time;
-
- time.tv_nsec = 0;
-
s3c_rtc_enable(pdev, 1);
- s3c_rtc_gettime(&pdev->dev, &tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- restore_time_delta(&s3c_rtc_delta, &time);
-
writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
return 0;
}
next parent reply other threads:[~2007-02-22 3:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200702211929.17203.david-b@pacbell.net>
2007-02-22 3:50 ` David Brownell [this message]
2007-02-22 3:50 ` [patch 6/6] rtc suspend()/resume() restores system clock David Brownell
2007-02-22 22:58 ` several messages Guennadi Liakhovetski
2007-02-22 22:58 ` Guennadi Liakhovetski
2007-02-22 22:58 ` Guennadi Liakhovetski
2007-02-23 1:15 ` David Brownell
2007-02-23 1:15 ` David Brownell
2007-02-23 1:15 ` David Brownell
2007-02-23 11:17 ` Johannes Berg
2007-02-23 11:17 ` Johannes Berg
2007-02-23 11:17 ` Johannes Berg
2007-02-23 18:31 ` rtc suspend()/resume() restores system clock Guennadi Liakhovetski
2007-02-23 18:31 ` Guennadi Liakhovetski
2007-02-23 18:31 ` Guennadi Liakhovetski
2007-02-23 20:24 ` Johannes Berg
2007-02-23 20:24 ` Johannes Berg
2007-02-23 20:24 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200702211950.22422.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=akpm@linux-foundation.org \
--cc=alessandro.zummo@towertech.it \
--cc=johnstul@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.osdl.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.