* [PATCH 24/28] rt2x00: Spellcheck for some comments.
@ 2007-02-28 14:07 Ivo van Doorn
0 siblings, 0 replies; only message in thread
From: Ivo van Doorn @ 2007-02-28 14:07 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless
Spellcheck for some comments.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
index 5ad5d75..29a8203 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
@@ -114,7 +114,7 @@ static void rt2x00_bbp_write(const struct rt2x00_dev *rt2x00dev,
u32 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("BBPCSR register busy. Write failed.\n");
@@ -139,7 +139,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
u32 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("BBPCSR register busy. Read failed.\n");
@@ -157,7 +157,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
rt2x00_register_write(rt2x00dev, BBPCSR, reg);
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
reg = rt2x00_bbp_check(rt2x00dev);
if (reg == 0xffff)
@@ -746,8 +746,8 @@ static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev,
rt2x00_register_write(rt2x00dev, PWRCSR1, reg);
/*
- * Device is not guarenteed to be in the requested state yet.
- * We must wait untill the register indicates that the
+ * Device is not guaranteed to be in the requested state yet.
+ * We must wait until the register indicates that the
* device has entered the correct state.
*/
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
index 9763da5..e5d032c 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
@@ -114,7 +114,7 @@ static void rt2x00_bbp_write(const struct rt2x00_dev *rt2x00dev,
u32 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("BBPCSR register busy. Write failed.\n");
@@ -139,7 +139,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
u32 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("BBPCSR register busy. Read failed.\n");
@@ -157,7 +157,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
rt2x00_register_write(rt2x00dev, BBPCSR, reg);
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
reg = rt2x00_bbp_check(rt2x00dev);
if (reg == 0xffff)
@@ -720,7 +720,7 @@ static void rt2500pci_link_tuner(struct work_struct *work)
return;
/*
- * Retreive link quality.
+ * Retrieve link quality.
*/
rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
if (!rssi)
@@ -837,8 +837,8 @@ static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
rt2x00_register_write(rt2x00dev, PWRCSR1, reg);
/*
- * Device is not guarenteed to be in the requested state yet.
- * We must wait untill the register indicates that the
+ * Device is not guaranteed to be in the requested state yet.
+ * We must wait until the register indicates that the
* device has entered the correct state.
*/
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
index bfad5a6..86846a1 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
@@ -150,7 +150,7 @@ static void rt2x00_bbp_write(const struct rt2x00_dev *rt2x00dev,
u16 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("PHY_CSR8 register busy. Write failed.\n");
@@ -174,7 +174,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
u16 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("PHY_CSR8 register busy. Read failed.\n");
@@ -191,7 +191,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
rt2x00_register_write(rt2x00dev, PHY_CSR7, reg);
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("PHY_CSR8 register busy. Read failed.\n");
@@ -740,7 +740,7 @@ static void rt2500usb_link_tuner(struct work_struct *work)
return;
/*
- * Retreive link quality.
+ * Retrieve link quality.
*/
rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
if (!rssi)
@@ -864,8 +864,8 @@ static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
rt2x00_register_write(rt2x00dev, MAC_CSR17, reg);
/*
- * Device is not guarenteed to be in the requested state yet.
- * We must wait untill the register indicates that the
+ * Device is not guaranteed to be in the requested state yet.
+ * We must wait until the register indicates that the
* device has entered the correct state.
*/
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
index ec149d1..f160e66 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
@@ -120,7 +120,7 @@ static void rt2x00_bbp_write(const struct rt2x00_dev *rt2x00dev,
u32 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("PHY_CSR3 register busy. Write failed.\n");
@@ -145,7 +145,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
u32 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("PHY_CSR3 register busy. Read failed.\n");
@@ -163,7 +163,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
rt2x00_register_write(rt2x00dev, PHY_CSR3, reg);
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
reg = rt2x00_bbp_check(rt2x00dev);
if (reg == 0xffff)
@@ -948,7 +948,7 @@ static void rt61pci_link_tuner(struct work_struct *work)
u8 low_bound;
/*
- * Retreive link quality.
+ * Retrieve link quality.
*/
rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
if (!rssi)
@@ -960,7 +960,7 @@ static void rt61pci_link_tuner(struct work_struct *work)
rt61pci_activity_led(rt2x00dev, rssi);
/*
- * Determine upper and lower limit for BBP17 register.
+ * Determine upper and lower limits for BBP17 register.
*/
if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
up_bound = 0x48;
@@ -1111,8 +1111,8 @@ static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev,
}
/*
- * Device is not guarenteed to be in the requested state yet.
- * We must wait untill the register indicates that the
+ * Device is not guaranteed to be in the requested state yet.
+ * We must wait until the register indicates that the
* device has entered the correct state.
*/
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
index ffecc64..e75a478 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
@@ -152,7 +152,7 @@ static void rt2x00_bbp_write(const struct rt2x00_dev *rt2x00dev,
u32 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("PHY_CSR3 register busy. Write failed.\n");
@@ -177,7 +177,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
u32 reg;
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
if (rt2x00_bbp_check(rt2x00dev) == 0xffff) {
ERROR("PHY_CSR3 register busy. Read failed.\n");
@@ -195,7 +195,7 @@ static void rt2x00_bbp_read(const struct rt2x00_dev *rt2x00dev,
rt2x00_register_write(rt2x00dev, PHY_CSR3, reg);
/*
- * Wait untill the BBP becomes ready.
+ * Wait until the BBP becomes ready.
*/
reg = rt2x00_bbp_check(rt2x00dev);
if (reg == 0xffff)
@@ -845,7 +845,7 @@ static void rt73usb_link_tuner(struct work_struct *work)
u8 low_bound;
/*
- * Retreive link quality.
+ * Retrieve link quality.
*/
rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
if (!rssi)
@@ -857,7 +857,7 @@ static void rt73usb_link_tuner(struct work_struct *work)
rt73usb_activity_led(rt2x00dev, rssi);
/*
- * Determine upper and lower limit for BBP17 register.
+ * Determine upper and lower limits for BBP17 register.
*/
if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
up_bound = 0x48;
@@ -1018,8 +1018,8 @@ static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev,
0x00, USB_MODE_SLEEP, NULL, 0, REGISTER_TIMEOUT);
/*
- * Device is not guarenteed to be in the requested state yet.
- * We must wait untill the register indicates that the
+ * Device is not guaranteed to be in the requested state yet.
+ * We must wait until the register indicates that the
* device has entered the correct state.
*/
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2007-02-28 14:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-28 14:07 [PATCH 24/28] rt2x00: Spellcheck for some comments Ivo van Doorn
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.