* [PATCH 20/28] rt2x00: Move channel time detection to rt2x00lib
@ 2007-02-28 14:07 Ivo van Doorn
0 siblings, 0 replies; only message in thread
From: Ivo van Doorn @ 2007-02-28 14:07 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless
Use the rt2x00lib provided function for detecting channel time.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
index f7347e3..fa1437c 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
@@ -1184,46 +1184,6 @@ continue_csr_init:
return 0;
}
-static int rt2400pci_init_channel_time(struct rt2x00_dev *rt2x00dev)
-{
- unsigned long jiffies_start;
- unsigned long jiffies_end;
-
- /*
- * Only initialize the channel_change_time
- * if it has not been set previously.
- */
- if (rt2x00dev->hw->channel_change_time)
- return 0;
-
- /*
- * Invalidate the rx_status.channel value to make sure
- * the config channel will be correctly executed.
- */
- rt2x00dev->rx_status.channel = 0;
-
- /*
- * Determine channel_change_time
- * by measuring the time it takes
- * to switch the channel.
- */
- jiffies_start = jiffies;
- rt2400pci_config_channel(rt2x00dev,
- rt2x00dev->hwmodes[0].channels[0].val,
- rt2x00dev->hwmodes[0].channels[0].chan,
- rt2x00dev->hwmodes[0].channels[0].freq,
- 0);
- jiffies_end = jiffies;
-
- rt2x00dev->hw->channel_change_time =
- jiffies_to_usecs((long)jiffies_end - (long)jiffies_start);
-
- NOTICE("Channel change time has been set to %d.\n",
- rt2x00dev->hw->channel_change_time);
-
- return 0;
-}
-
/*
* Device initialization functions.
*/
@@ -1333,7 +1293,7 @@ static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Determine channel change time.
*/
- if (rt2400pci_init_channel_time(rt2x00dev))
+ if (rt2x00lib_detect_channel_time(rt2x00dev))
goto exit_fail;
/*
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
index 40c3fb2..8ad17ba 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
@@ -1307,46 +1307,6 @@ continue_csr_init:
return 0;
}
-static int rt2500pci_init_channel_time(struct rt2x00_dev *rt2x00dev)
-{
- unsigned long jiffies_start;
- unsigned long jiffies_end;
-
- /*
- * Only initialize the channel_change_time
- * if it has not been set previously.
- */
- if (rt2x00dev->hw->channel_change_time)
- return 0;
-
- /*
- * Invalidate the rx_status.channel value to make sure
- * the config channel will be correctly executed.
- */
- rt2x00dev->rx_status.channel = 0;
-
- /*
- * Determine channel_change_time
- * by measuring the time it takes
- * to switch the channel.
- */
- jiffies_start = jiffies;
- rt2500pci_config_channel(rt2x00dev,
- rt2x00dev->hwmodes[0].channels[0].val,
- rt2x00dev->hwmodes[0].channels[0].chan,
- rt2x00dev->hwmodes[0].channels[0].freq,
- rt2x00dev->hwmodes[0].channels[0].power_level);
- jiffies_end = jiffies;
-
- rt2x00dev->hw->channel_change_time =
- jiffies_to_usecs((long)jiffies_end - (long)jiffies_start);
-
- NOTICE("Channel change time has been set to %d.\n",
- rt2x00dev->hw->channel_change_time);
-
- return 0;
-}
-
/*
* Device initialization functions.
*/
@@ -1456,7 +1416,7 @@ static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Determine channel change time.
*/
- if (rt2500pci_init_channel_time(rt2x00dev))
+ if (rt2x00lib_detect_channel_time(rt2x00dev))
goto exit_fail;
/*
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
index d593d18..4244e9d 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
@@ -1213,46 +1213,6 @@ continue_csr_init:
return 0;
}
-static int rt2500usb_init_channel_time(struct rt2x00_dev *rt2x00dev)
-{
- unsigned long jiffies_start;
- unsigned long jiffies_end;
-
- /*
- * Only initialize the channel_change_time
- * if it has not been set previously.
- */
- if (rt2x00dev->hw->channel_change_time)
- return 0;
-
- /*
- * Invalidate the rx_status.channel value to make sure
- * the config channel will be correctly executed.
- */
- rt2x00dev->rx_status.channel = 0;
-
- /*
- * Determine channel_change_time
- * by measuring the time it takes
- * to switch the channel.
- */
- jiffies_start = jiffies;
- rt2500usb_config_channel(rt2x00dev,
- rt2x00dev->hwmodes[0].channels[0].val,
- rt2x00dev->hwmodes[0].channels[0].chan,
- rt2x00dev->hwmodes[0].channels[0].freq,
- rt2x00dev->hwmodes[0].channels[0].power_level);
- jiffies_end = jiffies;
-
- rt2x00dev->hw->channel_change_time =
- jiffies_to_usecs((long)jiffies_end - (long)jiffies_start);
-
- NOTICE("Channel change time has been set to %d.\n",
- rt2x00dev->hw->channel_change_time);
-
- return 0;
-}
-
/*
* Device initialization functions.
*/
@@ -1354,7 +1314,7 @@ static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Determine channel change time.
*/
- if (rt2500usb_init_channel_time(rt2x00dev))
+ if (rt2x00lib_detect_channel_time(rt2x00dev))
goto exit_fail;
SET_FLAG(rt2x00dev, DEVICE_ENABLED_RADIO);
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
index 1cd68d0..53dedcb 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
@@ -1589,46 +1589,6 @@ continue_csr_init:
return 0;
}
-static int rt61pci_init_channel_time(struct rt2x00_dev *rt2x00dev)
-{
- unsigned long jiffies_start;
- unsigned long jiffies_end;
-
- /*
- * Only initialize the channel_change_time
- * if it has not been set previously.
- */
- if (rt2x00dev->hw->channel_change_time)
- return 0;
-
- /*
- * Invalidate the rx_status.channel value to make sure
- * the config channel will be correctly executed.
- */
- rt2x00dev->rx_status.channel = 0;
-
- /*
- * Determine channel_change_time
- * by measuring the time it takes
- * to switch the channel.
- */
- jiffies_start = jiffies;
- rt61pci_config_channel(rt2x00dev,
- rt2x00dev->hwmodes[0].channels[0].val,
- rt2x00dev->hwmodes[0].channels[0].chan,
- rt2x00dev->hwmodes[0].channels[0].freq,
- rt2x00dev->hwmodes[0].channels[0].power_level);
- jiffies_end = jiffies;
-
- rt2x00dev->hw->channel_change_time =
- jiffies_to_usecs((long)jiffies_end - (long)jiffies_start);
-
- NOTICE("Channel change time has been set to %d.\n",
- rt2x00dev->hw->channel_change_time);
-
- return 0;
-}
-
/*
* Device initialization functions.
*/
@@ -1745,7 +1705,7 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Determine channel change time.
*/
- if (rt61pci_init_channel_time(rt2x00dev))
+ if (rt2x00lib_detect_channel_time(rt2x00dev))
goto exit_fail;
/*
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
index 2418466..e628d43 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
@@ -1370,46 +1370,6 @@ continue_csr_init:
return 0;
}
-static int rt73usb_init_channel_time(struct rt2x00_dev *rt2x00dev)
-{
- unsigned long jiffies_start;
- unsigned long jiffies_end;
-
- /*
- * Only initialize the channel_change_time
- * if it has not been set previously.
- */
- if (rt2x00dev->hw->channel_change_time)
- return 0;
-
- /*
- * Invalidate the rx_status.channel value to make sure
- * the config channel will be correctly executed.
- */
- rt2x00dev->rx_status.channel = 0;
-
- /*
- * Determine channel_change_time
- * by measuring the time it takes
- * to switch the channel.
- */
- jiffies_start = jiffies;
- rt73usb_config_channel(rt2x00dev,
- rt2x00dev->hwmodes[0].channels[0].val,
- rt2x00dev->hwmodes[0].channels[0].chan,
- rt2x00dev->hwmodes[0].channels[0].freq,
- rt2x00dev->hwmodes[0].channels[0].power_level);
- jiffies_end = jiffies;
-
- rt2x00dev->hw->channel_change_time =
- jiffies_to_usecs((long)jiffies_end - (long)jiffies_start);
-
- NOTICE("Channel change time has been set to %d.\n",
- rt2x00dev->hw->channel_change_time);
-
- return 0;
-}
-
/*
* Device initialization functions.
*/
@@ -1518,7 +1478,7 @@ static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Determine channel change time.
*/
- if (rt73usb_init_channel_time(rt2x00dev))
+ if (rt2x00lib_detect_channel_time(rt2x00dev))
goto exit_fail;
SET_FLAG(rt2x00dev, DEVICE_ENABLED_RADIO);
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2007-02-28 14:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-28 14:07 [PATCH 20/28] rt2x00: Move channel time detection to rt2x00lib Ivo van Doorn
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.