* [PATCH 3/28] rt2x00: Make debug option rt2x00-global
@ 2007-02-28 14:07 Ivo van Doorn
0 siblings, 0 replies; only message in thread
From: Ivo van Doorn @ 2007-02-28 14:07 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless
Remove per-driver debug option, and replace it with a
rt2x00 global debug option.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
diff --git a/drivers/net/wireless/mac80211/rt2x00/Kconfig b/drivers/net/wireless/mac80211/rt2x00/Kconfig
index 7206cb6..491fe08 100644
--- a/drivers/net/wireless/mac80211/rt2x00/Kconfig
+++ b/drivers/net/wireless/mac80211/rt2x00/Kconfig
@@ -16,12 +16,6 @@ config RT2400PCI
When compiled as a module, this driver will be called "rt2400pci.ko".
-config RT2400PCI_DEBUG
- bool "Ralink rt2400 debug output"
- depends on RT2400PCI
- ---help---
- Enable debugging output.
-
config RT2500PCI
tristate "Ralink rt2500 pci/pcmcia support"
depends on RT2X00 && PCI
@@ -31,12 +25,6 @@ config RT2500PCI
When compiled as a module, this driver will be called "rt2500pci.ko".
-config RT2500PCI_DEBUG
- bool "Ralink rt2500 debug output"
- depends on RT2500PCI
- ---help---
- Enable debugging output.
-
config RT61PCI
tristate "Ralink rt61 pci/pcmcia support"
depends on RT2X00 && FW_LOADER && PCI
@@ -47,12 +35,6 @@ config RT61PCI
When compiled as a module, this driver will be called "rt61pci.ko".
-config RT61PCI_DEBUG
- bool "Ralink rt61 debug output"
- depends on RT61PCI
- ---help---
- Enable debugging output.
-
config RT2500USB
tristate "Ralink rt2500 usb support"
depends on RT2X00 && USB
@@ -61,12 +43,6 @@ config RT2500USB
When compiled as a module, this driver will be called "rt2500usb.ko".
-config RT2500USB_DEBUG
- bool "Ralink rt2500 debug output"
- depends on RT2500USB
- ---help---
- Enable debugging output.
-
config RT73USB
tristate "Ralink rt73 usb support"
depends on RT2X00 && FW_LOADER && USB
@@ -76,12 +52,6 @@ config RT73USB
When compiled as a module, this driver will be called "rt73usb.ko".
-config RT73USB_DEBUG
- bool "Ralink rt73 debug output"
- depends on RT73USB
- ---help---
- Enable debugging output.
-
config RT2X00_DEBUGFS
tristate "Ralink debugfs support"
depends on RT2X00 && DEBUG_FS
@@ -89,3 +59,9 @@ config RT2X00_DEBUGFS
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
most important register types of the rt2x00 devices.
+
+config RT2X00_DEBUG
+ bool "Ralink debug output"
+ depends on RT2X00
+ ---help---
+ Enable debugging output for all rt2x00 modules
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
index df1e569..14e55b9 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
@@ -47,10 +47,6 @@
*/
#define DRV_NAME "rt2400pci"
-#ifdef CONFIG_RT2400PCI_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT2400PCI_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00pci.h"
#include "rt2400pci.h"
@@ -3037,10 +3033,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards");
MODULE_DEVICE_TABLE(pci, rt2400pci_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT2400PCI_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT2400PCI_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct pci_driver rt2400pci_driver = {
.name = DRV_NAME,
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
index 3594dc5..6722135 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
@@ -47,10 +47,6 @@
*/
#define DRV_NAME "rt2500pci"
-#ifdef CONFIG_RT2500PCI_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT2500PCI_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00pci.h"
#include "rt2500pci.h"
@@ -3349,10 +3345,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT2500PCI_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT2500PCI_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct pci_driver rt2500pci_driver = {
.name = DRV_NAME,
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
index 0a0de18..df155ba 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
@@ -43,10 +43,6 @@
*/
#define DRV_NAME "rt2500usb"
-#ifdef CONFIG_RT2500USB_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT2500USB_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00usb.h"
#include "rt2500usb.h"
@@ -3183,10 +3179,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT2500USB_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT2500USB_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct usb_driver rt2500usb_driver = {
.name = DRV_NAME,
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
index 757cd9e..abe458e 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
@@ -49,10 +49,6 @@
*/
#define DRV_NAME "rt61pci"
-#ifdef CONFIG_RT61PCI_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT61PCI_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00pci.h"
#include "rt61pci.h"
@@ -3879,10 +3875,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 "
MODULE_DEVICE_TABLE(pci, rt61pci_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT61PCI_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT61PCI_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct pci_driver rt61pci_driver = {
.name = DRV_NAME,
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
index 7311764..9626cf1 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
@@ -45,10 +45,6 @@
*/
#define DRV_NAME "rt73usb"
-#ifdef CONFIG_RT73USB_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT73USB_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00usb.h"
#include "rt73usb.h"
@@ -3519,10 +3515,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2573 USB chipset based cards");
MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT73USB_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT73USB_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct usb_driver rt73usb_driver = {
.name = DRV_NAME,
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2007-02-28 14:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-28 14:07 [PATCH 3/28] rt2x00: Make debug option rt2x00-global Ivo van Doorn
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.