* [GIT PULL] ibm-acpi: more updates
@ 2007-02-24 15:01 Henrique de Moraes Holschuh
[not found] ` <11723292823837-git-send-email-hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org>
` (2 more replies)
0 siblings, 3 replies; 15+ messages in thread
From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw)
To: Len Brown
Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA,
ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Len,
Please pull from:
git://repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
branch for-upstream/acpi-test
to receive the following patches:
Henrique de Moraes Holschuh (5):
ACPI: ibm-acpi: rename some identifiers
ACPI: ibm-acpi: add header file
ACPI: ibm-acpi: organize code
ACPI: ibm-acpi: update copyright notice
ACPI: ibm-acpi: update documentation
It has a lot of code shuffling, which I did while cleaning up and preparing for
a sysfs conversion. It would be helpful to me if it is merged in acpi-test, as
that means it will be much faster for me to keep my working tree and what is in
acpi-test and mainline in sync. The rest are just minor doc updates.
This patch set should not change any functionality.
I just added the patches on top of what I had already sent you (and that you
have already merged). If you'd prefer it to be based on something else, just
say so.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 15+ messages in thread[parent not found: <11723292823837-git-send-email-hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org>]
* [PATCH 1/5] ACPI: ibm-acpi: rename some identifiers @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Rename some identifiers so that they are more in tune with the rest of the driver code, or less generic. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- drivers/acpi/ibm_acpi.c | 43 ++++++++++++++++++++++++------------------- 1 files changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index e7309a6..0a22d46 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -505,7 +505,7 @@ static int ibm_acpi_driver_init(void) return 0; } -static int driver_read(char *p) +static int ibm_acpi_driver_read(char *p) { int len = 0; @@ -1309,9 +1309,9 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define EC_HLCL 0x0c -#define EC_HLBL 0x0d -#define EC_HLMS 0x0e +#define IBMACPI_LED_EC_HLCL 0x0c +#define IBMACPI_LED_EC_HLBL 0x0d +#define IBMACPI_LED_EC_HLMS 0x0e static int led_write(char *buf) { @@ -1343,13 +1343,15 @@ static int led_write(char *buf) } else if (led_supported == IBMACPI_LED_OLD) { /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ led = 1 << led; - ret = ec_write(EC_HLMS, led); + ret = ec_write(IBMACPI_LED_EC_HLMS, led); if (ret >= 0) ret = - ec_write(EC_HLBL, led * led_exp_hlbl[ind]); + ec_write(IBMACPI_LED_EC_HLBL, + led * led_exp_hlbl[ind]); if (ret >= 0) ret = - ec_write(EC_HLCL, led * led_exp_hlcl[ind]); + ec_write(IBMACPI_LED_EC_HLCL, + led * led_exp_hlcl[ind]); if (ret < 0) return ret; } else { @@ -1656,8 +1658,8 @@ static int brightness_read(char *p) return len; } -#define BRIGHTNESS_UP 4 -#define BRIGHTNESS_DOWN 5 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 static int brightness_set(int value) { @@ -1666,7 +1668,8 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? + TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1765,9 +1768,9 @@ static int volume_read(char *p) return len; } -#define VOLUME_DOWN 0 -#define VOLUME_UP 1 -#define VOLUME_MUTE 2 +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 static int volume_write(char *buf) { @@ -1801,7 +1804,8 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN; + cmos_cmd = new_level > level ? + TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1813,14 +1817,15 @@ static int volume_write(char *buf) !acpi_ec_write(volume_offset, i + inc)) return -EIO; - if (mute && (!cmos_eval(VOLUME_MUTE) || + if (mute && (!cmos_eval(TP_CMOS_VOLUME_MUTE) || !acpi_ec_write(volume_offset, new_level + mute))) return -EIO; } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP; + cmos_cmd = new_mute ? + TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -2311,7 +2316,7 @@ static struct ibm_struct ibms[] = { { .name = "driver", .init = ibm_acpi_driver_init, - .read = driver_read, + .read = ibm_acpi_driver_read, }, { .name = "hotkey", @@ -2525,7 +2530,7 @@ static int __init ibm_device_add(struct acpi_device *device) return 0; } -static int __init register_driver(struct ibm_struct *ibm) +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) { int ret; @@ -2558,7 +2563,7 @@ static int __init ibm_init(struct ibm_struct *ibm) return 0; if (ibm->hid) { - ret = register_driver(ibm); + ret = register_ibmacpi_subdriver(ibm); if (ret < 0) return ret; ibm->driver_registered = 1; -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 1/5] ACPI: ibm-acpi: rename some identifiers @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Rename some identifiers so that they are more in tune with the rest of the driver code, or less generic. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- drivers/acpi/ibm_acpi.c | 43 ++++++++++++++++++++++++------------------- 1 files changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index e7309a6..0a22d46 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -505,7 +505,7 @@ static int ibm_acpi_driver_init(void) return 0; } -static int driver_read(char *p) +static int ibm_acpi_driver_read(char *p) { int len = 0; @@ -1309,9 +1309,9 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define EC_HLCL 0x0c -#define EC_HLBL 0x0d -#define EC_HLMS 0x0e +#define IBMACPI_LED_EC_HLCL 0x0c +#define IBMACPI_LED_EC_HLBL 0x0d +#define IBMACPI_LED_EC_HLMS 0x0e static int led_write(char *buf) { @@ -1343,13 +1343,15 @@ static int led_write(char *buf) } else if (led_supported == IBMACPI_LED_OLD) { /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ led = 1 << led; - ret = ec_write(EC_HLMS, led); + ret = ec_write(IBMACPI_LED_EC_HLMS, led); if (ret >= 0) ret = - ec_write(EC_HLBL, led * led_exp_hlbl[ind]); + ec_write(IBMACPI_LED_EC_HLBL, + led * led_exp_hlbl[ind]); if (ret >= 0) ret = - ec_write(EC_HLCL, led * led_exp_hlcl[ind]); + ec_write(IBMACPI_LED_EC_HLCL, + led * led_exp_hlcl[ind]); if (ret < 0) return ret; } else { @@ -1656,8 +1658,8 @@ static int brightness_read(char *p) return len; } -#define BRIGHTNESS_UP 4 -#define BRIGHTNESS_DOWN 5 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 static int brightness_set(int value) { @@ -1666,7 +1668,8 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? + TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1765,9 +1768,9 @@ static int volume_read(char *p) return len; } -#define VOLUME_DOWN 0 -#define VOLUME_UP 1 -#define VOLUME_MUTE 2 +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 static int volume_write(char *buf) { @@ -1801,7 +1804,8 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN; + cmos_cmd = new_level > level ? + TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1813,14 +1817,15 @@ static int volume_write(char *buf) !acpi_ec_write(volume_offset, i + inc)) return -EIO; - if (mute && (!cmos_eval(VOLUME_MUTE) || + if (mute && (!cmos_eval(TP_CMOS_VOLUME_MUTE) || !acpi_ec_write(volume_offset, new_level + mute))) return -EIO; } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP; + cmos_cmd = new_mute ? + TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -2311,7 +2316,7 @@ static struct ibm_struct ibms[] = { { .name = "driver", .init = ibm_acpi_driver_init, - .read = driver_read, + .read = ibm_acpi_driver_read, }, { .name = "hotkey", @@ -2525,7 +2530,7 @@ static int __init ibm_device_add(struct acpi_device *device) return 0; } -static int __init register_driver(struct ibm_struct *ibm) +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) { int ret; @@ -2558,7 +2563,7 @@ static int __init ibm_init(struct ibm_struct *ibm) return 0; if (ibm->hid) { - ret = register_driver(ibm); + ret = register_ibmacpi_subdriver(ibm); if (ret < 0) return ret; ibm->driver_registered = 1; -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/5] ACPI: ibm-acpi: add header file @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Add a (private) header file for ibm-acpi, and move type definitions and ThinkPad driver constants to the new header file. This patch has no functional changes. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- drivers/acpi/ibm_acpi.c | 136 +--------------- drivers/acpi/ibm_acpi.h | 436 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 437 insertions(+), 135 deletions(-) create mode 100644 drivers/acpi/ibm_acpi.h diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 0a22d46..bfa1b09 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -78,43 +78,13 @@ * 2004-08-09 0.1 initial release, support for X series */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <linux/proc_fs.h> -#include <linux/backlight.h> -#include <asm/uaccess.h> - -#include <linux/dmi.h> -#include <linux/jiffies.h> -#include <linux/workqueue.h> - -#include <acpi/acpi_drivers.h> -#include <acpi/acnamesp.h> - -#define IBM_NAME "ibm" -#define IBM_DESC "IBM ThinkPad ACPI Extras" -#define IBM_FILE "ibm_acpi" -#define IBM_URL "http://ibm-acpi.sf.net/" +#include "ibm_acpi.h" MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); MODULE_DESCRIPTION(IBM_DESC); MODULE_VERSION(IBM_VERSION); MODULE_LICENSE("GPL"); -#define IBM_DIR IBM_NAME - -#define IBM_LOG IBM_FILE ": " -#define IBM_ERR KERN_ERR IBM_LOG -#define IBM_NOTICE KERN_NOTICE IBM_LOG -#define IBM_INFO KERN_INFO IBM_LOG -#define IBM_DEBUG KERN_DEBUG IBM_LOG - -#define IBM_MAX_ACPI_ARGS 3 - #define __unused __attribute__ ((unused)) static int experimental; @@ -206,22 +176,6 @@ IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ "JFNS", /* 770x-JL */ ); /* all others */ -#define IBM_HKEY_HID "IBM0068" -#define IBM_PCI_HID "PNP0A03" - -enum thermal_access_mode { - IBMACPI_THERMAL_NONE = 0, /* No thermal support */ - IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ - IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ - IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ - IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ -}; - -#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ -struct ibm_thermal_sensors_struct { - s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; -}; - /* * FAN ACCESS MODES * @@ -322,72 +276,12 @@ struct ibm_thermal_sensors_struct { * but the ACPI tables just mention level 7. */ -enum fan_status_access_mode { - IBMACPI_FAN_NONE = 0, /* No fan status or control */ - IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ - IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ -}; - -enum fan_control_access_mode { - IBMACPI_FAN_WR_NONE = 0, /* No fan control */ - IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ - IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ - IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ -}; - -enum fan_control_commands { - IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ - IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ - IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, - * and also watchdog cmd */ -}; - -enum { /* Fan control constants */ - fan_status_offset = 0x2f, /* EC register 0x2f */ - fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) - * 0x84 must be read before 0x85 */ - - IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer - * disengaged */ - IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan - * control */ -}; - static char *ibm_thinkpad_ec_found = NULL; -struct ibm_struct { - char *name; - char param[32]; - - char *hid; - struct acpi_driver *driver; - - int (*init) (void); - int (*read) (char *); - int (*write) (char *); - void (*exit) (void); - - void (*notify) (struct ibm_struct *, u32); - acpi_handle *handle; - int type; - struct acpi_device *device; - - int driver_registered; - int proc_created; - int init_called; - int notify_installed; - - int experimental; -}; - static struct proc_dir_entry *proc_dir = NULL; static struct backlight_device *ibm_backlight_device = NULL; -#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") -#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") -#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -774,13 +668,6 @@ static int wan_write(char *buf) return 0; } -enum video_access_mode { - IBMACPI_VIDEO_NONE = 0, - IBMACPI_VIDEO_570, /* 570 */ - IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ - IBMACPI_VIDEO_NEW, /* all others */ -}; - static enum video_access_mode video_supported; static int video_orig_autosw; @@ -1247,12 +1134,6 @@ static int cmos_write(char *buf) return 0; } -enum led_access_mode { - IBMACPI_LED_NONE = 0, - IBMACPI_LED_570, /* 570 */ - IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - IBMACPI_LED_NEW, /* all others */ -}; static enum led_access_mode led_supported; static int led_init(void) @@ -1309,10 +1190,6 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define IBMACPI_LED_EC_HLCL 0x0c -#define IBMACPI_LED_EC_HLBL 0x0d -#define IBMACPI_LED_EC_HLMS 0x0e - static int led_write(char *buf) { char *cmd; @@ -1628,8 +1505,6 @@ static int ecdump_write(char *buf) return 0; } -static int brightness_offset = 0x31; - static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1658,9 +1533,6 @@ static int brightness_read(char *p) return len; } -#define TP_CMOS_BRIGHTNESS_UP 4 -#define TP_CMOS_BRIGHTNESS_DOWN 5 - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1748,8 +1620,6 @@ static void brightness_exit(void) } } -static int volume_offset = 0x30; - static int volume_read(char *p) { int len = 0; @@ -1768,10 +1638,6 @@ static int volume_read(char *p) return len; } -#define TP_CMOS_VOLUME_DOWN 0 -#define TP_CMOS_VOLUME_UP 1 -#define TP_CMOS_VOLUME_MUTE 2 - static int volume_write(char *buf) { int cmos_cmd, inc, i; diff --git a/drivers/acpi/ibm_acpi.h b/drivers/acpi/ibm_acpi.h new file mode 100644 index 0000000..4d0387a --- /dev/null +++ b/drivers/acpi/ibm_acpi.h @@ -0,0 +1,436 @@ +/* + * ibm_acpi.h - IBM ThinkPad ACPI Extras + * + * + * Copyright (C) 2004-2005 Borislav Deianov <borislav-iA+eEnwkJgzk1uMJSBkQmQ@public.gmane.org> + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __IBM_ACPI_H__ +#define __IBM_ACPI_H__ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> + +#include <linux/proc_fs.h> +#include <linux/backlight.h> +#include <asm/uaccess.h> + +#include <linux/dmi.h> +#include <linux/jiffies.h> +#include <linux/workqueue.h> + +#include <acpi/acpi_drivers.h> +#include <acpi/acnamesp.h> + + +/**************************************************************************** + * Main driver + */ + +#define IBM_NAME "ibm" +#define IBM_DESC "IBM ThinkPad ACPI Extras" +#define IBM_FILE "ibm_acpi" +#define IBM_URL "http://ibm-acpi.sf.net/" + +#define IBM_DIR IBM_NAME + +#define IBM_LOG IBM_FILE ": " +#define IBM_ERR KERN_ERR IBM_LOG +#define IBM_NOTICE KERN_NOTICE IBM_LOG +#define IBM_INFO KERN_INFO IBM_LOG +#define IBM_DEBUG KERN_DEBUG IBM_LOG + +#define IBM_MAX_ACPI_ARGS 3 + +/* ThinkPad CMOS commands */ +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 + +struct ibm_struct { + char *name; + char param[32]; + + char *hid; + struct acpi_driver *driver; + + int (*init) (void); + int (*read) (char *); + int (*write) (char *); + void (*exit) (void); + + void (*notify) (struct ibm_struct *, u32); + acpi_handle *handle; + int type; + struct acpi_device *device; + + int driver_registered; + int proc_created; + int init_called; + int notify_installed; + + int experimental; +}; + +#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") +#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") +#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) + +/* ACPI HIDs */ +#define IBM_HKEY_HID "IBM0068" +#define IBM_PCI_HID "PNP0A03" + +/* ACPI helpers */ +static int acpi_evalf(acpi_handle handle, + void *res, char *method, char *fmt, ...); +static int acpi_ec_read(int i, u8 * p); +static int acpi_ec_write(int i, u8 v); +static int _sta(acpi_handle handle); + +/* ACPI handles */ +static acpi_handle root_handle; /* root namespace */ +static acpi_handle ec_handle; /* EC */ +static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ +static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ + +static void ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path); +#define IBM_HANDLE_INIT(object) \ + ibm_handle_init(#object, &object##_handle, *object##_parent, \ + object##_paths, ARRAY_SIZE(object##_paths), &object##_path) + +/* ACPI devices */ +static void dispatch_notify(acpi_handle handle, u32 event, void *data); +static int setup_notify(struct ibm_struct *ibm); +static int ibm_device_add(struct acpi_device *device); +static int register_ibmacpi_subdriver(struct ibm_struct *ibm); + +/* procfs support */ +static struct proc_dir_entry *proc_dir; +static int ibm_acpi_driver_init(void); +static int ibm_acpi_driver_read(char *p); + +/* procfs helpers */ +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data); +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data); +static char *next_cmd(char **cmds); + +/* Module */ +static int experimental; +static char *ibm_thinkpad_ec_found; + +static char* check_dmi_for_ec(void); +static int set_ibm_param(const char *val, struct kernel_param *kp); +static int acpi_ibm_init(void); +static void acpi_ibm_exit(void); + + +/**************************************************************************** + * Subdrivers + */ + +static struct ibm_struct ibms[]; +static int ibm_init(struct ibm_struct *ibm); +static void ibm_exit(struct ibm_struct *ibm); + + +/* + * Bay subdriver + */ + +#ifdef CONFIG_ACPI_IBM_BAY +static int bay_status_supported, bay_eject_supported; +static int bay_status2_supported, bay_eject2_supported; + +static acpi_handle bay_handle, bay_ej_handle; +static acpi_handle bay2_handle, bay2_ej_handle; + +static int bay_init(void); +static void bay_notify(struct ibm_struct *ibm, u32 event); +static int bay_read(char *p); +static int bay_write(char *buf); +#endif /* CONFIG_ACPI_IBM_BAY */ + + +/* + * Beep subdriver + */ + +static acpi_handle beep_handle; + +static int beep_read(char *p); +static int beep_write(char *buf); + + +/* + * Bluetooth subdriver + */ + +static int bluetooth_supported; + +static int bluetooth_init(void); +static int bluetooth_status(void); +static int bluetooth_read(char *p); +static int bluetooth_write(char *buf); + + +/* + * Brightness (backlight) subdriver + */ + +static struct backlight_device *ibm_backlight_device; +static int brightness_offset = 0x31; + +static int brightness_init(void); +static void brightness_exit(void); +static int brightness_get(struct backlight_device *bd); +static int brightness_set(int value); +static int brightness_update_status(struct backlight_device *bd); +static int brightness_read(char *p); +static int brightness_write(char *buf); + + +/* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd); +static int cmos_read(char *p); +static int cmos_write(char *buf); + + +/* + * Dock subdriver + */ + +static acpi_handle pci_handle; +#ifdef CONFIG_ACPI_IBM_DOCK +static acpi_handle dock_handle; + +static void dock_notify(struct ibm_struct *ibm, u32 event); +static int dock_read(char *p); +static int dock_write(char *buf); +#endif /* CONFIG_ACPI_IBM_DOCK */ + + +/* + * EC dump subdriver + */ + +static int ecdump_read(char *p) ; +static int ecdump_write(char *buf); + + +/* + * Fan subdriver + */ + +enum { /* Fan control constants */ + fan_status_offset = 0x2f, /* EC register 0x2f */ + fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) + * 0x84 must be read before 0x85 */ + + IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer + * disengaged */ + IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan + * control */ +}; + +enum fan_status_access_mode { + IBMACPI_FAN_NONE = 0, /* No fan status or control */ + IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ + IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ +}; + +enum fan_control_access_mode { + IBMACPI_FAN_WR_NONE = 0, /* No fan control */ + IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ + IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ + IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ +}; + +enum fan_control_commands { + IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ + IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ + IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, + * and also watchdog cmd */ +}; + +static enum fan_status_access_mode fan_status_access_mode; +static enum fan_control_access_mode fan_control_access_mode; +static enum fan_control_commands fan_control_commands; +static int fan_control_status_known; +static u8 fan_control_initial_status; +static int fan_watchdog_maxinterval; + +static acpi_handle fans_handle, gfan_handle, sfan_handle; + +static int fan_init(void); +static void fan_exit(void); +static int fan_get_status(u8 *status); +static int fan_get_speed(unsigned int *speed); +static void fan_watchdog_fire(struct work_struct *ignored); +static void fan_watchdog_reset(void); +static int fan_set_level(int level); +static int fan_set_enable(void); +static int fan_set_disable(void); +static int fan_set_speed(int speed); +static int fan_read(char *p); +static int fan_write(char *buf); +static int fan_write_cmd_level(const char *cmd, int *rc); +static int fan_write_cmd_enable(const char *cmd, int *rc); +static int fan_write_cmd_disable(const char *cmd, int *rc); +static int fan_write_cmd_speed(const char *cmd, int *rc); +static int fan_write_cmd_watchdog(const char *cmd, int *rc); + + +/* + * Hotkey subdriver + */ + +static int hotkey_supported; +static int hotkey_mask_supported; +static int hotkey_orig_status; +static int hotkey_orig_mask; + +static int hotkey_init(void); +static void hotkey_exit(void); +static int hotkey_get(int *status, int *mask); +static int hotkey_set(int status, int mask); +static void hotkey_notify(struct ibm_struct *ibm, u32 event); +static int hotkey_read(char *p); +static int hotkey_write(char *buf); + + +/* + * LED subdriver + */ + +enum led_access_mode { + IBMACPI_LED_NONE = 0, + IBMACPI_LED_570, /* 570 */ + IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + IBMACPI_LED_NEW, /* all others */ +}; + +enum { /* For IBMACPI_LED_OLD */ + IBMACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ + IBMACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ + IBMACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ +}; + +static enum led_access_mode led_supported; +static acpi_handle led_handle; + +static int led_init(void); +static int led_read(char *p); +static int led_write(char *buf); + +/* + * Light (thinklight) subdriver + */ + +static int light_supported; +static int light_status_supported; +static acpi_handle lght_handle, ledb_handle; + +static int light_init(void); +static int light_read(char *p); +static int light_write(char *buf); + + +/* + * Thermal subdriver + */ + +enum thermal_access_mode { + IBMACPI_THERMAL_NONE = 0, /* No thermal support */ + IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ + IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ + IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ + IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ +}; + +#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ +struct ibm_thermal_sensors_struct { + s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; +}; + +static int thermal_init(void); +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); +static int thermal_read(char *p); + + +/* + * Video subdriver + */ + +enum video_access_mode { + IBMACPI_VIDEO_NONE = 0, + IBMACPI_VIDEO_570, /* 570 */ + IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ + IBMACPI_VIDEO_NEW, /* all others */ +}; + +static enum video_access_mode video_supported; +static int video_orig_autosw; +static acpi_handle vid_handle, vid2_handle; + +static int video_init(void); +static void video_exit(void); +static int video_status(void); +static int video_autosw(void); +static int video_switch(void); +static int video_switch2(int status); +static int video_expand(void); +static int video_read(char *p); +static int video_write(char *buf); + + +/* + * Volume subdriver + */ + +static int volume_offset = 0x30; + +static int volume_read(char *p); +static int volume_write(char *buf); + + +/* + * Wan subdriver + */ + +static int wan_supported; + +static int wan_init(void); +static int wan_status(void); +static int wan_read(char *p); +static int wan_write(char *buf); + + +#endif /* __IBM_ACPI_H */ -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/5] ACPI: ibm-acpi: add header file @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Add a (private) header file for ibm-acpi, and move type definitions and ThinkPad driver constants to the new header file. This patch has no functional changes. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- drivers/acpi/ibm_acpi.c | 136 +--------------- drivers/acpi/ibm_acpi.h | 436 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 437 insertions(+), 135 deletions(-) create mode 100644 drivers/acpi/ibm_acpi.h diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 0a22d46..bfa1b09 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -78,43 +78,13 @@ * 2004-08-09 0.1 initial release, support for X series */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <linux/proc_fs.h> -#include <linux/backlight.h> -#include <asm/uaccess.h> - -#include <linux/dmi.h> -#include <linux/jiffies.h> -#include <linux/workqueue.h> - -#include <acpi/acpi_drivers.h> -#include <acpi/acnamesp.h> - -#define IBM_NAME "ibm" -#define IBM_DESC "IBM ThinkPad ACPI Extras" -#define IBM_FILE "ibm_acpi" -#define IBM_URL "http://ibm-acpi.sf.net/" +#include "ibm_acpi.h" MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); MODULE_DESCRIPTION(IBM_DESC); MODULE_VERSION(IBM_VERSION); MODULE_LICENSE("GPL"); -#define IBM_DIR IBM_NAME - -#define IBM_LOG IBM_FILE ": " -#define IBM_ERR KERN_ERR IBM_LOG -#define IBM_NOTICE KERN_NOTICE IBM_LOG -#define IBM_INFO KERN_INFO IBM_LOG -#define IBM_DEBUG KERN_DEBUG IBM_LOG - -#define IBM_MAX_ACPI_ARGS 3 - #define __unused __attribute__ ((unused)) static int experimental; @@ -206,22 +176,6 @@ IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ "JFNS", /* 770x-JL */ ); /* all others */ -#define IBM_HKEY_HID "IBM0068" -#define IBM_PCI_HID "PNP0A03" - -enum thermal_access_mode { - IBMACPI_THERMAL_NONE = 0, /* No thermal support */ - IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ - IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ - IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ - IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ -}; - -#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ -struct ibm_thermal_sensors_struct { - s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; -}; - /* * FAN ACCESS MODES * @@ -322,72 +276,12 @@ struct ibm_thermal_sensors_struct { * but the ACPI tables just mention level 7. */ -enum fan_status_access_mode { - IBMACPI_FAN_NONE = 0, /* No fan status or control */ - IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ - IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ -}; - -enum fan_control_access_mode { - IBMACPI_FAN_WR_NONE = 0, /* No fan control */ - IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ - IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ - IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ -}; - -enum fan_control_commands { - IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ - IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ - IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, - * and also watchdog cmd */ -}; - -enum { /* Fan control constants */ - fan_status_offset = 0x2f, /* EC register 0x2f */ - fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) - * 0x84 must be read before 0x85 */ - - IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer - * disengaged */ - IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan - * control */ -}; - static char *ibm_thinkpad_ec_found = NULL; -struct ibm_struct { - char *name; - char param[32]; - - char *hid; - struct acpi_driver *driver; - - int (*init) (void); - int (*read) (char *); - int (*write) (char *); - void (*exit) (void); - - void (*notify) (struct ibm_struct *, u32); - acpi_handle *handle; - int type; - struct acpi_device *device; - - int driver_registered; - int proc_created; - int init_called; - int notify_installed; - - int experimental; -}; - static struct proc_dir_entry *proc_dir = NULL; static struct backlight_device *ibm_backlight_device = NULL; -#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") -#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") -#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -774,13 +668,6 @@ static int wan_write(char *buf) return 0; } -enum video_access_mode { - IBMACPI_VIDEO_NONE = 0, - IBMACPI_VIDEO_570, /* 570 */ - IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ - IBMACPI_VIDEO_NEW, /* all others */ -}; - static enum video_access_mode video_supported; static int video_orig_autosw; @@ -1247,12 +1134,6 @@ static int cmos_write(char *buf) return 0; } -enum led_access_mode { - IBMACPI_LED_NONE = 0, - IBMACPI_LED_570, /* 570 */ - IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - IBMACPI_LED_NEW, /* all others */ -}; static enum led_access_mode led_supported; static int led_init(void) @@ -1309,10 +1190,6 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define IBMACPI_LED_EC_HLCL 0x0c -#define IBMACPI_LED_EC_HLBL 0x0d -#define IBMACPI_LED_EC_HLMS 0x0e - static int led_write(char *buf) { char *cmd; @@ -1628,8 +1505,6 @@ static int ecdump_write(char *buf) return 0; } -static int brightness_offset = 0x31; - static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1658,9 +1533,6 @@ static int brightness_read(char *p) return len; } -#define TP_CMOS_BRIGHTNESS_UP 4 -#define TP_CMOS_BRIGHTNESS_DOWN 5 - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1748,8 +1620,6 @@ static void brightness_exit(void) } } -static int volume_offset = 0x30; - static int volume_read(char *p) { int len = 0; @@ -1768,10 +1638,6 @@ static int volume_read(char *p) return len; } -#define TP_CMOS_VOLUME_DOWN 0 -#define TP_CMOS_VOLUME_UP 1 -#define TP_CMOS_VOLUME_MUTE 2 - static int volume_write(char *buf) { int cmos_cmd, inc, i; diff --git a/drivers/acpi/ibm_acpi.h b/drivers/acpi/ibm_acpi.h new file mode 100644 index 0000000..4d0387a --- /dev/null +++ b/drivers/acpi/ibm_acpi.h @@ -0,0 +1,436 @@ +/* + * ibm_acpi.h - IBM ThinkPad ACPI Extras + * + * + * Copyright (C) 2004-2005 Borislav Deianov <borislav-iA+eEnwkJgzk1uMJSBkQmQ@public.gmane.org> + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __IBM_ACPI_H__ +#define __IBM_ACPI_H__ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> + +#include <linux/proc_fs.h> +#include <linux/backlight.h> +#include <asm/uaccess.h> + +#include <linux/dmi.h> +#include <linux/jiffies.h> +#include <linux/workqueue.h> + +#include <acpi/acpi_drivers.h> +#include <acpi/acnamesp.h> + + +/**************************************************************************** + * Main driver + */ + +#define IBM_NAME "ibm" +#define IBM_DESC "IBM ThinkPad ACPI Extras" +#define IBM_FILE "ibm_acpi" +#define IBM_URL "http://ibm-acpi.sf.net/" + +#define IBM_DIR IBM_NAME + +#define IBM_LOG IBM_FILE ": " +#define IBM_ERR KERN_ERR IBM_LOG +#define IBM_NOTICE KERN_NOTICE IBM_LOG +#define IBM_INFO KERN_INFO IBM_LOG +#define IBM_DEBUG KERN_DEBUG IBM_LOG + +#define IBM_MAX_ACPI_ARGS 3 + +/* ThinkPad CMOS commands */ +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 + +struct ibm_struct { + char *name; + char param[32]; + + char *hid; + struct acpi_driver *driver; + + int (*init) (void); + int (*read) (char *); + int (*write) (char *); + void (*exit) (void); + + void (*notify) (struct ibm_struct *, u32); + acpi_handle *handle; + int type; + struct acpi_device *device; + + int driver_registered; + int proc_created; + int init_called; + int notify_installed; + + int experimental; +}; + +#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") +#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") +#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) + +/* ACPI HIDs */ +#define IBM_HKEY_HID "IBM0068" +#define IBM_PCI_HID "PNP0A03" + +/* ACPI helpers */ +static int acpi_evalf(acpi_handle handle, + void *res, char *method, char *fmt, ...); +static int acpi_ec_read(int i, u8 * p); +static int acpi_ec_write(int i, u8 v); +static int _sta(acpi_handle handle); + +/* ACPI handles */ +static acpi_handle root_handle; /* root namespace */ +static acpi_handle ec_handle; /* EC */ +static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ +static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ + +static void ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path); +#define IBM_HANDLE_INIT(object) \ + ibm_handle_init(#object, &object##_handle, *object##_parent, \ + object##_paths, ARRAY_SIZE(object##_paths), &object##_path) + +/* ACPI devices */ +static void dispatch_notify(acpi_handle handle, u32 event, void *data); +static int setup_notify(struct ibm_struct *ibm); +static int ibm_device_add(struct acpi_device *device); +static int register_ibmacpi_subdriver(struct ibm_struct *ibm); + +/* procfs support */ +static struct proc_dir_entry *proc_dir; +static int ibm_acpi_driver_init(void); +static int ibm_acpi_driver_read(char *p); + +/* procfs helpers */ +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data); +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data); +static char *next_cmd(char **cmds); + +/* Module */ +static int experimental; +static char *ibm_thinkpad_ec_found; + +static char* check_dmi_for_ec(void); +static int set_ibm_param(const char *val, struct kernel_param *kp); +static int acpi_ibm_init(void); +static void acpi_ibm_exit(void); + + +/**************************************************************************** + * Subdrivers + */ + +static struct ibm_struct ibms[]; +static int ibm_init(struct ibm_struct *ibm); +static void ibm_exit(struct ibm_struct *ibm); + + +/* + * Bay subdriver + */ + +#ifdef CONFIG_ACPI_IBM_BAY +static int bay_status_supported, bay_eject_supported; +static int bay_status2_supported, bay_eject2_supported; + +static acpi_handle bay_handle, bay_ej_handle; +static acpi_handle bay2_handle, bay2_ej_handle; + +static int bay_init(void); +static void bay_notify(struct ibm_struct *ibm, u32 event); +static int bay_read(char *p); +static int bay_write(char *buf); +#endif /* CONFIG_ACPI_IBM_BAY */ + + +/* + * Beep subdriver + */ + +static acpi_handle beep_handle; + +static int beep_read(char *p); +static int beep_write(char *buf); + + +/* + * Bluetooth subdriver + */ + +static int bluetooth_supported; + +static int bluetooth_init(void); +static int bluetooth_status(void); +static int bluetooth_read(char *p); +static int bluetooth_write(char *buf); + + +/* + * Brightness (backlight) subdriver + */ + +static struct backlight_device *ibm_backlight_device; +static int brightness_offset = 0x31; + +static int brightness_init(void); +static void brightness_exit(void); +static int brightness_get(struct backlight_device *bd); +static int brightness_set(int value); +static int brightness_update_status(struct backlight_device *bd); +static int brightness_read(char *p); +static int brightness_write(char *buf); + + +/* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd); +static int cmos_read(char *p); +static int cmos_write(char *buf); + + +/* + * Dock subdriver + */ + +static acpi_handle pci_handle; +#ifdef CONFIG_ACPI_IBM_DOCK +static acpi_handle dock_handle; + +static void dock_notify(struct ibm_struct *ibm, u32 event); +static int dock_read(char *p); +static int dock_write(char *buf); +#endif /* CONFIG_ACPI_IBM_DOCK */ + + +/* + * EC dump subdriver + */ + +static int ecdump_read(char *p) ; +static int ecdump_write(char *buf); + + +/* + * Fan subdriver + */ + +enum { /* Fan control constants */ + fan_status_offset = 0x2f, /* EC register 0x2f */ + fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) + * 0x84 must be read before 0x85 */ + + IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer + * disengaged */ + IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan + * control */ +}; + +enum fan_status_access_mode { + IBMACPI_FAN_NONE = 0, /* No fan status or control */ + IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ + IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ +}; + +enum fan_control_access_mode { + IBMACPI_FAN_WR_NONE = 0, /* No fan control */ + IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ + IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ + IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ +}; + +enum fan_control_commands { + IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ + IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ + IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, + * and also watchdog cmd */ +}; + +static enum fan_status_access_mode fan_status_access_mode; +static enum fan_control_access_mode fan_control_access_mode; +static enum fan_control_commands fan_control_commands; +static int fan_control_status_known; +static u8 fan_control_initial_status; +static int fan_watchdog_maxinterval; + +static acpi_handle fans_handle, gfan_handle, sfan_handle; + +static int fan_init(void); +static void fan_exit(void); +static int fan_get_status(u8 *status); +static int fan_get_speed(unsigned int *speed); +static void fan_watchdog_fire(struct work_struct *ignored); +static void fan_watchdog_reset(void); +static int fan_set_level(int level); +static int fan_set_enable(void); +static int fan_set_disable(void); +static int fan_set_speed(int speed); +static int fan_read(char *p); +static int fan_write(char *buf); +static int fan_write_cmd_level(const char *cmd, int *rc); +static int fan_write_cmd_enable(const char *cmd, int *rc); +static int fan_write_cmd_disable(const char *cmd, int *rc); +static int fan_write_cmd_speed(const char *cmd, int *rc); +static int fan_write_cmd_watchdog(const char *cmd, int *rc); + + +/* + * Hotkey subdriver + */ + +static int hotkey_supported; +static int hotkey_mask_supported; +static int hotkey_orig_status; +static int hotkey_orig_mask; + +static int hotkey_init(void); +static void hotkey_exit(void); +static int hotkey_get(int *status, int *mask); +static int hotkey_set(int status, int mask); +static void hotkey_notify(struct ibm_struct *ibm, u32 event); +static int hotkey_read(char *p); +static int hotkey_write(char *buf); + + +/* + * LED subdriver + */ + +enum led_access_mode { + IBMACPI_LED_NONE = 0, + IBMACPI_LED_570, /* 570 */ + IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + IBMACPI_LED_NEW, /* all others */ +}; + +enum { /* For IBMACPI_LED_OLD */ + IBMACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ + IBMACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ + IBMACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ +}; + +static enum led_access_mode led_supported; +static acpi_handle led_handle; + +static int led_init(void); +static int led_read(char *p); +static int led_write(char *buf); + +/* + * Light (thinklight) subdriver + */ + +static int light_supported; +static int light_status_supported; +static acpi_handle lght_handle, ledb_handle; + +static int light_init(void); +static int light_read(char *p); +static int light_write(char *buf); + + +/* + * Thermal subdriver + */ + +enum thermal_access_mode { + IBMACPI_THERMAL_NONE = 0, /* No thermal support */ + IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ + IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ + IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ + IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ +}; + +#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ +struct ibm_thermal_sensors_struct { + s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; +}; + +static int thermal_init(void); +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); +static int thermal_read(char *p); + + +/* + * Video subdriver + */ + +enum video_access_mode { + IBMACPI_VIDEO_NONE = 0, + IBMACPI_VIDEO_570, /* 570 */ + IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ + IBMACPI_VIDEO_NEW, /* all others */ +}; + +static enum video_access_mode video_supported; +static int video_orig_autosw; +static acpi_handle vid_handle, vid2_handle; + +static int video_init(void); +static void video_exit(void); +static int video_status(void); +static int video_autosw(void); +static int video_switch(void); +static int video_switch2(int status); +static int video_expand(void); +static int video_read(char *p); +static int video_write(char *buf); + + +/* + * Volume subdriver + */ + +static int volume_offset = 0x30; + +static int volume_read(char *p); +static int volume_write(char *buf); + + +/* + * Wan subdriver + */ + +static int wan_supported; + +static int wan_init(void); +static int wan_status(void); +static int wan_read(char *p); +static int wan_write(char *buf); + + +#endif /* __IBM_ACPI_H */ -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/5] ACPI: ibm-acpi: organize code @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Shuffle code around to better organize the driver code inside the ibm-acpi.c file. This patch adds no functional changes. It is pure fluff that will make me a bit more productive. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- drivers/acpi/ibm_acpi.c | 1382 +++++++++++++++++++++++++---------------------- 1 files changed, 749 insertions(+), 633 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index bfa1b09..3158fc3 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -87,8 +87,17 @@ MODULE_LICENSE("GPL"); #define __unused __attribute__ ((unused)) -static int experimental; -module_param(experimental, int, 0); +/**************************************************************************** + **************************************************************************** + * + * ACPI Helpers and device model + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ACPI basic handles + */ static acpi_handle root_handle = NULL; @@ -105,183 +114,31 @@ IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */ "\\_SB.PCI0.ICH3.EC0", /* R31 */ "\\_SB.PCI0.LPC.EC", /* all others */ - ); + ); -IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ - "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ - "\\_SB.PCI0.VID0", /* 770e */ - "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ - "\\_SB.PCI0.AGP.VID", /* all others */ - ); /* R30, R31 */ +IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ +IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + +/************************************************************************* + * Misc ACPI handles + */ IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ "\\CMS", /* R40, R40e */ - ); /* all others */ -#ifdef CONFIG_ACPI_IBM_DOCK -IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ - "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ - "\\_SB.PCI0.PCI1.DOCK", /* all others */ - "\\_SB.PCI.ISA.SLCE", /* 570 */ - ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ -#endif -#ifdef CONFIG_ACPI_IBM_BAY -IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ - "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ - "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ - "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ - ); /* A21e, R30, R31 */ - -IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ - "_EJ0", /* all others */ - ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ - -IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ - "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ - "_EJ0", /* 770x */ - ); /* all others */ -#endif /* CONFIG_ACPI_IBM_BAY */ - -/* don't list other alternatives as we install a notify handler on the 570 */ -IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ + ); /* all others */ IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ "^HKEY", /* R30, R31 */ "HKEY", /* all others */ - ); /* 570 */ - -IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ -IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ - -IBM_HANDLE(led, ec, "SLED", /* 570 */ - "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - "LED", /* all others */ - ); /* R30, R31 */ - -IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ -IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ -IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ + ); /* 570 */ -IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ - "\\FSPD", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ - "JFNS", /* 770x-JL */ - ); /* all others */ -/* - * FAN ACCESS MODES - * - * IBMACPI_FAN_RD_ACPI_GFAN: - * ACPI GFAN method: returns fan level - * - * see IBMACPI_FAN_WR_ACPI_SFAN - * EC 0x2f not available if GFAN exists - * - * IBMACPI_FAN_WR_ACPI_SFAN: - * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) - * - * EC 0x2f might be available *for reading*, but never for writing. - * - * IBMACPI_FAN_WR_TPEC: - * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported - * on almost all ThinkPads - * - * Fan speed changes of any sort (including those caused by the - * disengaged mode) are usually done slowly by the firmware as the - * maximum ammount of fan duty cycle change per second seems to be - * limited. - * - * Reading is not available if GFAN exists. - * Writing is not available if SFAN exists. - * - * Bits - * 7 automatic mode engaged; - * (default operation mode of the ThinkPad) - * fan level is ignored in this mode. - * 6 disengage mode (takes precedence over bit 7); - * not available on all thinkpads. May disable - * the tachometer, and speeds up fan to 100% duty-cycle, - * which speeds it up far above the standard RPM - * levels. It is not impossible that it could cause - * hardware damage. - * 5-3 unused in some models. Extra bits for fan level - * in others, but still useless as all values above - * 7 map to the same speed as level 7 in these models. - * 2-0 fan level (0..7 usually) - * 0x00 = stop - * 0x07 = max (set when temperatures critical) - * Some ThinkPads may have other levels, see - * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) - * - * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at - * boot. Apparently the EC does not intialize it, so unless ACPI DSDT - * does so, its initial value is meaningless (0x07). - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * ---- - * - * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): - * Main fan tachometer reading (in RPM) - * - * This register is present on all ThinkPads with a new-style EC, and - * it is known not to be present on the A21m/e, and T22, as there is - * something else in offset 0x84 according to the ACPI DSDT. Other - * ThinkPads from this same time period (and earlier) probably lack the - * tachometer as well. - * - * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare - * was never fixed by IBM to report the EC firmware version string - * probably support the tachometer (like the early X models), so - * detecting it is quite hard. We need more data to know for sure. - * - * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings - * might result. - * - * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this - * register is not invalidated in ThinkPads that disable tachometer - * readings. Thus, the tachometer readings go stale. - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * IBMACPI_FAN_WR_ACPI_FANS: - * ThinkPad X31, X40, X41. Not available in the X60. - * - * FANS ACPI handle: takes three arguments: low speed, medium speed, - * high speed. ACPI DSDT seems to map these three speeds to levels - * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH - * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") - * - * The speeds are stored on handles - * (FANA:FAN9), (FANC:FANB), (FANE:FAND). - * - * There are three default speed sets, acessible as handles: - * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H - * - * ACPI DSDT switches which set is in use depending on various - * factors. - * - * IBMACPI_FAN_WR_TPEC is also available and should be used to - * command the fan. The X31/X40/X41 seems to have 8 fan levels, - * but the ACPI tables just mention level 7. +/************************************************************************* + * ACPI helpers */ -static char *ibm_thinkpad_ec_found = NULL; - -static struct proc_dir_entry *proc_dir = NULL; - -static struct backlight_device *ibm_backlight_device = NULL; - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -371,6 +228,198 @@ static void __unused acpi_print_int(acpi_handle handle, char *method) printk(IBM_ERR "error calling %s\n", method); } +static int acpi_ec_read(int i, u8 * p) +{ + int v; + + if (ecrd_handle) { + if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) + return 0; + *p = v; + } else { + if (ec_read(i, p) < 0) + return 0; + } + + return 1; +} + +static int acpi_ec_write(int i, u8 v) +{ + if (ecwr_handle) { + if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) + return 0; + } else { + if (ec_write(i, v) < 0) + return 0; + } + + return 1; +} + +static int _sta(acpi_handle handle) +{ + int status; + + if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) + status = 0; + + return status; +} + +/************************************************************************* + * ACPI device model + */ + +static void __init ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path) +{ + int i; + acpi_status status; + + for (i = 0; i < num_paths; i++) { + status = acpi_get_handle(parent, paths[i], handle); + if (ACPI_SUCCESS(status)) { + *path = paths[i]; + return; + } + } + + *handle = NULL; +} + +static void dispatch_notify(acpi_handle handle, u32 event, void *data) +{ + struct ibm_struct *ibm = data; + + if (!ibm || !ibm->notify) + return; + + ibm->notify(ibm, event); +} + +static int __init setup_notify(struct ibm_struct *ibm) +{ + acpi_status status; + int ret; + + if (!*ibm->handle) + return 0; + + ret = acpi_bus_get_device(*ibm->handle, &ibm->device); + if (ret < 0) { + printk(IBM_ERR "%s device not present\n", ibm->name); + return 0; + } + + acpi_driver_data(ibm->device) = ibm; + sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); + + status = acpi_install_notify_handler(*ibm->handle, ibm->type, + dispatch_notify, ibm); + if (ACPI_FAILURE(status)) { + printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", + ibm->name, status); + return -ENODEV; + } + ibm->notify_installed = 1; + return 0; +} + +static int __init ibm_device_add(struct acpi_device *device) +{ + return 0; +} + +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) +{ + int ret; + + ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); + if (!ibm->driver) { + printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); + return -1; + } + + sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); + ibm->driver->ids = ibm->hid; + ibm->driver->ops.add = &ibm_device_add; + + ret = acpi_bus_register_driver(ibm->driver); + if (ret < 0) { + printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", + ibm->hid, ret); + kfree(ibm->driver); + } + + return ret; +} + + +/**************************************************************************** + **************************************************************************** + * + * Procfs Helpers + * + **************************************************************************** + ****************************************************************************/ + +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + struct ibm_struct *ibm = data; + int len; + + if (!ibm || !ibm->read) + return -EINVAL; + + len = ibm->read(page); + if (len < 0) + return len; + + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data) +{ + struct ibm_struct *ibm = data; + char *kernbuf; + int ret; + + if (!ibm || !ibm->write) + return -EINVAL; + + kernbuf = kmalloc(count + 2, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; + + if (copy_from_user(kernbuf, userbuf, count)) { + kfree(kernbuf); + return -EFAULT; + } + + kernbuf[count] = 0; + strcat(kernbuf, ","); + ret = ibm->write(kernbuf); + if (ret == 0) + ret = count; + + kfree(kernbuf); + + return ret; +} + static char *next_cmd(char **cmds) { char *start = *cmds; @@ -387,6 +436,19 @@ static char *next_cmd(char **cmds) return start; } + +/**************************************************************************** + **************************************************************************** + * + * Subdrivers + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ibm-acpi init subdriver + */ + static int ibm_acpi_driver_init(void) { printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); @@ -409,11 +471,51 @@ static int ibm_acpi_driver_read(char *p) return len; } +/************************************************************************* + * Hotkey subdriver + */ + static int hotkey_supported; static int hotkey_mask_supported; static int hotkey_orig_status; static int hotkey_orig_mask; +static int hotkey_init(void) +{ + /* hotkey not supported on 570 */ + hotkey_supported = hkey_handle != NULL; + + if (hotkey_supported) { + /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + A30, R30, R31, T20-22, X20-21, X22-24 */ + hotkey_mask_supported = + acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); + + if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) + return -ENODEV; + } + + return 0; +} + +static void hotkey_exit(void) +{ + if (hotkey_supported) + hotkey_set(hotkey_orig_status, hotkey_orig_mask); +} + +static void hotkey_notify(struct ibm_struct *ibm, u32 event) +{ + int hkey; + + if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) + acpi_bus_generate_event(ibm->device, event, hkey); + else { + printk(IBM_ERR "unknown hotkey event %d\n", event); + acpi_bus_generate_event(ibm->device, event, 0); + } +} + static int hotkey_get(int *status, int *mask) { if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) @@ -444,24 +546,6 @@ static int hotkey_set(int status, int mask) return 1; } -static int hotkey_init(void) -{ - /* hotkey not supported on 570 */ - hotkey_supported = hkey_handle != NULL; - - if (hotkey_supported) { - /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - A30, R30, R31, T20-22, X20-21, X22-24 */ - hotkey_mask_supported = - acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); - - if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) - return -ENODEV; - } - - return 0; -} - static int hotkey_read(char *p) { int status, mask; @@ -523,23 +607,9 @@ static int hotkey_write(char *buf) return 0; } -static void hotkey_exit(void) -{ - if (hotkey_supported) - hotkey_set(hotkey_orig_status, hotkey_orig_mask); -} - -static void hotkey_notify(struct ibm_struct *ibm, u32 event) -{ - int hkey; - - if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) - acpi_bus_generate_event(ibm->device, event, hkey); - else { - printk(IBM_ERR "unknown hotkey event %d\n", event); - acpi_bus_generate_event(ibm->device, event, 0); - } -} +/************************************************************************* + * Bluetooth subdriver + */ static int bluetooth_supported; @@ -606,6 +676,10 @@ static int bluetooth_write(char *buf) return 0; } +/************************************************************************* + * Wan subdriver + */ + static int wan_supported; static int wan_init(void) @@ -668,9 +742,22 @@ static int wan_write(char *buf) return 0; } +/************************************************************************* + * Video subdriver + */ + static enum video_access_mode video_supported; static int video_orig_autosw; +IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ + "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ + "\\_SB.PCI0.VID0", /* 770e */ + "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ + "\\_SB.PCI0.AGP.VID", /* all others */ + ); /* R30, R31 */ + +IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + static int video_init(void) { int ivga; @@ -695,6 +782,11 @@ static int video_init(void) return 0; } +static void video_exit(void) +{ + acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); +} + static int video_status(void) { int status = 0; @@ -736,33 +828,6 @@ static int video_autosw(void) return autosw & 1; } -static int video_read(char *p) -{ - int status = video_status(); - int autosw = video_autosw(); - int len = 0; - - if (!video_supported) { - len += sprintf(p + len, "status:\t\tnot supported\n"); - return len; - } - - len += sprintf(p + len, "status:\t\tsupported\n"); - len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); - len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); - len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); - len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); - len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); - len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); - len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); - - return len; -} - static int video_switch(void) { int autosw = video_autosw(); @@ -812,6 +877,33 @@ static int video_switch2(int status) return ret; } +static int video_read(char *p) +{ + int status = video_status(); + int autosw = video_autosw(); + int len = 0; + + if (!video_supported) { + len += sprintf(p + len, "status:\t\tnot supported\n"); + return len; + } + + len += sprintf(p + len, "status:\t\tsupported\n"); + len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); + len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); + len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); + len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); + len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); + len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); + len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); + + return len; +} + static int video_write(char *buf) { char *cmd; @@ -862,14 +954,16 @@ static int video_write(char *buf) return 0; } -static void video_exit(void) -{ - acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); -} +/************************************************************************* + * Light (thinklight) subdriver + */ static int light_supported; static int light_status_supported; +IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ +IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ + static int light_init(void) { /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */ @@ -933,21 +1027,45 @@ static int light_write(char *buf) return 0; } -#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY) -static int _sta(acpi_handle handle) -{ - int status; - - if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) - status = 0; +/************************************************************************* + * Dock subdriver + */ - return status; -} -#endif +/* don't list other alternatives as we install a notify handler on the 570 */ +IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ #ifdef CONFIG_ACPI_IBM_DOCK + +IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ + "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ + "\\_SB.PCI0.PCI1.DOCK", /* all others */ + "\\_SB.PCI.ISA.SLCE", /* 570 */ + ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ + #define dock_docked() (_sta(dock_handle) & 1) +static void dock_notify(struct ibm_struct *ibm, u32 event) +{ + int docked = dock_docked(); + int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); + + if (event == 1 && !pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 1 && pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else if (event == 3 && docked) + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 3 && !docked) + acpi_bus_generate_event(ibm->device, event, 2); /* undock */ + else if (event == 0 && docked) + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else { + printk(IBM_ERR "unknown dock event %d, status %d\n", + event, _sta(dock_handle)); + acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ + } +} + static int dock_read(char *p) { int len = 0; @@ -987,28 +1105,11 @@ static int dock_write(char *buf) return 0; } -static void dock_notify(struct ibm_struct *ibm, u32 event) -{ - int docked = dock_docked(); - int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); +#endif /* CONFIG_ACPI_IBM_DOCK */ - if (event == 1 && !pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 1 && pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else if (event == 3 && docked) - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 3 && !docked) - acpi_bus_generate_event(ibm->device, event, 2); /* undock */ - else if (event == 0 && docked) - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else { - printk(IBM_ERR "unknown dock event %d, status %d\n", - event, _sta(dock_handle)); - acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ - } -} -#endif +/************************************************************************* + * Bay subdriver + */ #ifdef CONFIG_ACPI_IBM_BAY static int bay_status_supported; @@ -1016,6 +1117,21 @@ static int bay_status2_supported; static int bay_eject_supported; static int bay_eject2_supported; +IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ + "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ + "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ + "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ + ); /* A21e, R30, R31 */ +IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ + "_EJ0", /* all others */ + ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ +IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ + "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ + "_EJ0", /* 770x */ + ); /* all others */ + static int bay_init(void) { bay_status_supported = bay_handle && @@ -1031,6 +1147,11 @@ static int bay_init(void) return 0; } +static void bay_notify(struct ibm_struct *ibm, u32 event) +{ + acpi_bus_generate_event(ibm->device, event, 0); +} + #define bay_occupied(b) (_sta(b##_handle) & 1) static int bay_read(char *p) @@ -1081,12 +1202,19 @@ static int bay_write(char *buf) return 0; } +#endif /* CONFIG_ACPI_IBM_BAY */ -static void bay_notify(struct ibm_struct *ibm, u32 event) +/************************************************************************* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd) { - acpi_bus_generate_event(ibm->device, event, 0); + if (cmos_handle) + return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); + else + return 1; } -#endif /* CONFIG_ACPI_IBM_BAY */ static int cmos_read(char *p) { @@ -1104,14 +1232,6 @@ static int cmos_read(char *p) return len; } -static int cmos_eval(int cmos_cmd) -{ - if (cmos_handle) - return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); - else - return 1; -} - static int cmos_write(char *buf) { char *cmd; @@ -1134,8 +1254,18 @@ static int cmos_write(char *buf) return 0; } + +/************************************************************************* + * LED subdriver + */ + static enum led_access_mode led_supported; +IBM_HANDLE(led, ec, "SLED", /* 570 */ + "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + "LED", /* all others */ + ); /* R30, R31 */ + static int led_init(void) { if (!led_handle) @@ -1242,6 +1372,12 @@ static int led_write(char *buf) return 0; } +/************************************************************************* + * Beep subdriver + */ + +IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ + static int beep_read(char *p) { int len = 0; @@ -1277,34 +1413,9 @@ static int beep_write(char *buf) return 0; } -static int acpi_ec_read(int i, u8 * p) -{ - int v; - - if (ecrd_handle) { - if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) - return 0; - *p = v; - } else { - if (ec_read(i, p) < 0) - return 0; - } - - return 1; -} - -static int acpi_ec_write(int i, u8 v) -{ - if (ecwr_handle) { - if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) - return 0; - } else { - if (ec_write(i, v) < 0) - return 0; - } - - return 1; -} +/************************************************************************* + * Thermal subdriver + */ static enum thermal_access_mode thermal_read_mode; @@ -1446,6 +1557,10 @@ static int thermal_read(char *p) return len; } +/************************************************************************* + * EC Dump subdriver + */ + static u8 ecdump_regs[256]; static int ecdump_read(char *p) @@ -1505,6 +1620,52 @@ static int ecdump_write(char *buf) return 0; } +/************************************************************************* + * Backlight/brightness subdriver + */ + +static struct backlight_device *ibm_backlight_device = NULL; + +static struct backlight_ops ibm_backlight_data = { + .get_brightness = brightness_get, + .update_status = brightness_update_status, +}; + +static int brightness_init(void) +{ + int b; + + b = brightness_get(NULL); + if (b < 0) + return b; + + ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, + &ibm_backlight_data); + if (IS_ERR(ibm_backlight_device)) { + printk(IBM_ERR "Could not register backlight device\n"); + return PTR_ERR(ibm_backlight_device); + } + + ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.brightness = b; + backlight_update_status(ibm_backlight_device); + + return 0; +} + +static void brightness_exit(void) +{ + if (ibm_backlight_device) { + backlight_device_unregister(ibm_backlight_device); + ibm_backlight_device = NULL; + } +} + +static int brightness_update_status(struct backlight_device *bd) +{ + return brightness_set(bd->props.brightness); +} + static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1516,23 +1677,6 @@ static int brightness_get(struct backlight_device *bd) return level; } -static int brightness_read(char *p) -{ - int len = 0; - int level; - - if ((level = brightness_get(NULL)) < 0) { - len += sprintf(p + len, "level:\t\tunreadable\n"); - } else { - len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); - len += sprintf(p + len, "commands:\tup, down\n"); - len += sprintf(p + len, "commands:\tlevel <level>" - " (<level> is 0-7)\n"); - } - - return len; -} - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1540,8 +1684,7 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? - TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1553,6 +1696,23 @@ static int brightness_set(int value) return 0; } +static int brightness_read(char *p) +{ + int len = 0; + int level; + + if ((level = brightness_get(NULL)) < 0) { + len += sprintf(p + len, "level:\t\tunreadable\n"); + } else { + len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); + len += sprintf(p + len, "commands:\tup, down\n"); + len += sprintf(p + len, "commands:\tlevel <level>" + " (<level> is 0-7)\n"); + } + + return len; +} + static int brightness_write(char *buf) { int level; @@ -1580,45 +1740,9 @@ static int brightness_write(char *buf) return 0; } -static int brightness_update_status(struct backlight_device *bd) -{ - return brightness_set(bd->props.brightness); -} - -static struct backlight_ops ibm_backlight_data = { - .get_brightness = brightness_get, - .update_status = brightness_update_status, -}; - -static int brightness_init(void) -{ - int b; - - b = brightness_get(NULL); - if (b < 0) - return b; - - ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, - &ibm_backlight_data); - if (IS_ERR(ibm_backlight_device)) { - printk(IBM_ERR "Could not register backlight device\n"); - return PTR_ERR(ibm_backlight_device); - } - - ibm_backlight_device->props.max_brightness = 7; - ibm_backlight_device->props.brightness = b; - backlight_update_status(ibm_backlight_device); - - return 0; -} - -static void brightness_exit(void) -{ - if (ibm_backlight_device) { - backlight_device_unregister(ibm_backlight_device); - ibm_backlight_device = NULL; - } -} +/************************************************************************* + * Volume subdriver + */ static int volume_read(char *p) { @@ -1670,8 +1794,7 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? - TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; + cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1690,8 +1813,7 @@ static int volume_write(char *buf) } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? - TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; + cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -1702,6 +1824,111 @@ static int volume_write(char *buf) return 0; } + +/************************************************************************* + * Fan subdriver + */ + +/* + * FAN ACCESS MODES + * + * IBMACPI_FAN_RD_ACPI_GFAN: + * ACPI GFAN method: returns fan level + * + * see IBMACPI_FAN_WR_ACPI_SFAN + * EC 0x2f not available if GFAN exists + * + * IBMACPI_FAN_WR_ACPI_SFAN: + * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) + * + * EC 0x2f might be available *for reading*, but never for writing. + * + * IBMACPI_FAN_WR_TPEC: + * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported + * on almost all ThinkPads + * + * Fan speed changes of any sort (including those caused by the + * disengaged mode) are usually done slowly by the firmware as the + * maximum ammount of fan duty cycle change per second seems to be + * limited. + * + * Reading is not available if GFAN exists. + * Writing is not available if SFAN exists. + * + * Bits + * 7 automatic mode engaged; + * (default operation mode of the ThinkPad) + * fan level is ignored in this mode. + * 6 disengage mode (takes precedence over bit 7); + * not available on all thinkpads. May disable + * the tachometer, and speeds up fan to 100% duty-cycle, + * which speeds it up far above the standard RPM + * levels. It is not impossible that it could cause + * hardware damage. + * 5-3 unused in some models. Extra bits for fan level + * in others, but still useless as all values above + * 7 map to the same speed as level 7 in these models. + * 2-0 fan level (0..7 usually) + * 0x00 = stop + * 0x07 = max (set when temperatures critical) + * Some ThinkPads may have other levels, see + * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) + * + * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at + * boot. Apparently the EC does not intialize it, so unless ACPI DSDT + * does so, its initial value is meaningless (0x07). + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * ---- + * + * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): + * Main fan tachometer reading (in RPM) + * + * This register is present on all ThinkPads with a new-style EC, and + * it is known not to be present on the A21m/e, and T22, as there is + * something else in offset 0x84 according to the ACPI DSDT. Other + * ThinkPads from this same time period (and earlier) probably lack the + * tachometer as well. + * + * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare + * was never fixed by IBM to report the EC firmware version string + * probably support the tachometer (like the early X models), so + * detecting it is quite hard. We need more data to know for sure. + * + * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings + * might result. + * + * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this + * register is not invalidated in ThinkPads that disable tachometer + * readings. Thus, the tachometer readings go stale. + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * IBMACPI_FAN_WR_ACPI_FANS: + * ThinkPad X31, X40, X41. Not available in the X60. + * + * FANS ACPI handle: takes three arguments: low speed, medium speed, + * high speed. ACPI DSDT seems to map these three speeds to levels + * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH + * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") + * + * The speeds are stored on handles + * (FANA:FAN9), (FANC:FANB), (FANE:FAND). + * + * There are three default speed sets, acessible as handles: + * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H + * + * ACPI DSDT switches which set is in use depending on various + * factors. + * + * IBMACPI_FAN_WR_TPEC is also available and should be used to + * command the fan. The X31/X40/X41 seems to have 8 fan levels, + * but the ACPI tables just mention level 7. + */ + static enum fan_status_access_mode fan_status_access_mode; static enum fan_control_access_mode fan_control_access_mode; static enum fan_control_commands fan_control_commands; @@ -1713,6 +1940,14 @@ static void fan_watchdog_fire(struct work_struct *ignored); static int fan_watchdog_maxinterval; static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); +IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ +IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ + "\\FSPD", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ + "JFNS", /* 770x-JL */ + ); /* all others */ + static int fan_init(void) { fan_status_access_mode = IBMACPI_FAN_NONE; @@ -1828,6 +2063,12 @@ static int fan_get_status(u8 *status) return 0; } +static void fan_exit(void) +{ + cancel_delayed_work(&fan_watchdog_task); + flush_scheduled_work(); +} + static int fan_get_speed(unsigned int *speed) { u8 hi, lo; @@ -1851,10 +2092,14 @@ static int fan_get_speed(unsigned int *speed) return 0; } -static void fan_exit(void) +static void fan_watchdog_fire(struct work_struct *ignored) { - cancel_delayed_work(&fan_watchdog_task); - flush_scheduled_work(); + printk(IBM_NOTICE "fan watchdog: enabling fan\n"); + if (fan_set_enable()) { + printk(IBM_ERR "fan watchdog: error while enabling fan\n"); + /* reschedule for later */ + fan_watchdog_reset(); + } } static void fan_watchdog_reset(void) @@ -1876,90 +2121,6 @@ static void fan_watchdog_reset(void) fan_watchdog_active = 0; } -static int fan_read(char *p) -{ - int len = 0; - int rc; - u8 status; - unsigned int speed = 0; - - switch (fan_status_access_mode) { - case IBMACPI_FAN_RD_ACPI_GFAN: - /* 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - len += sprintf(p + len, "status:\t\t%s\n" - "level:\t\t%d\n", - (status != 0) ? "enabled" : "disabled", status); - break; - - case IBMACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - if (unlikely(!fan_control_status_known)) { - if (status != fan_control_initial_status) - fan_control_status_known = 1; - else - /* Return most likely status. In fact, it - * might be the only possible status */ - status = IBMACPI_FAN_EC_AUTO; - } - - len += sprintf(p + len, "status:\t\t%s\n", - (status != 0) ? "enabled" : "disabled"); - - /* No ThinkPad boots on disengaged mode, we can safely - * assume the tachometer is online if fan control status - * was unknown */ - if ((rc = fan_get_speed(&speed)) < 0) - return rc; - - len += sprintf(p + len, "speed:\t\t%d\n", speed); - - if (status & IBMACPI_FAN_EC_DISENGAGED) - /* Disengaged mode takes precedence */ - len += sprintf(p + len, "level:\t\tdisengaged\n"); - else if (status & IBMACPI_FAN_EC_AUTO) - len += sprintf(p + len, "level:\t\tauto\n"); - else - len += sprintf(p + len, "level:\t\t%d\n", status); - break; - - case IBMACPI_FAN_NONE: - default: - len += sprintf(p + len, "status:\t\tnot supported\n"); - } - - if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { - len += sprintf(p + len, "commands:\tlevel <level>"); - - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_SFAN: - len += sprintf(p + len, " (<level> is 0-7)\n"); - break; - - default: - len += sprintf(p + len, " (<level> is 0-7, " - "auto, disengaged)\n"); - break; - } - } - - if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) - len += sprintf(p + len, "commands:\tenable, disable\n" - "commands:\twatchdog <timeout> (<timeout> is 0 (off), " - "1-120 (seconds))\n"); - - if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) - len += sprintf(p + len, "commands:\tspeed <speed>" - " (<speed> is 0-65535)\n"); - - return len; -} - static int fan_set_level(int level) { switch (fan_control_access_mode) { @@ -2071,6 +2232,90 @@ static int fan_set_speed(int speed) return 0; } +static int fan_read(char *p) +{ + int len = 0; + int rc; + u8 status; + unsigned int speed = 0; + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + len += sprintf(p + len, "status:\t\t%s\n" + "level:\t\t%d\n", + (status != 0) ? "enabled" : "disabled", status); + break; + + case IBMACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + if (unlikely(!fan_control_status_known)) { + if (status != fan_control_initial_status) + fan_control_status_known = 1; + else + /* Return most likely status. In fact, it + * might be the only possible status */ + status = IBMACPI_FAN_EC_AUTO; + } + + len += sprintf(p + len, "status:\t\t%s\n", + (status != 0) ? "enabled" : "disabled"); + + /* No ThinkPad boots on disengaged mode, we can safely + * assume the tachometer is online if fan control status + * was unknown */ + if ((rc = fan_get_speed(&speed)) < 0) + return rc; + + len += sprintf(p + len, "speed:\t\t%d\n", speed); + + if (status & IBMACPI_FAN_EC_DISENGAGED) + /* Disengaged mode takes precedence */ + len += sprintf(p + len, "level:\t\tdisengaged\n"); + else if (status & IBMACPI_FAN_EC_AUTO) + len += sprintf(p + len, "level:\t\tauto\n"); + else + len += sprintf(p + len, "level:\t\t%d\n", status); + break; + + case IBMACPI_FAN_NONE: + default: + len += sprintf(p + len, "status:\t\tnot supported\n"); + } + + if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { + len += sprintf(p + len, "commands:\tlevel <level>"); + + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_SFAN: + len += sprintf(p + len, " (<level> is 0-7)\n"); + break; + + default: + len += sprintf(p + len, " (<level> is 0-7, " + "auto, disengaged)\n"); + break; + } + } + + if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) + len += sprintf(p + len, "commands:\tenable, disable\n" + "commands:\twatchdog <timeout> (<timeout> is 0 (off), " + "1-120 (seconds))\n"); + + if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) + len += sprintf(p + len, "commands:\tspeed <speed>" + " (<speed> is 0-65535)\n"); + + return len; +} + static int fan_write_cmd_level(const char *cmd, int *rc) { int level; @@ -2168,16 +2413,18 @@ static int fan_write(char *buf) return rc; } -static void fan_watchdog_fire(struct work_struct *ignored) -{ - printk(IBM_NOTICE "fan watchdog: enabling fan\n"); - if (fan_set_enable()) { - printk(IBM_ERR "fan watchdog: error while enabling fan\n"); - /* reschedule for later */ - fan_watchdog_reset(); - } -} +/**************************************************************************** + **************************************************************************** + * + * Infrastructure + * + **************************************************************************** + ****************************************************************************/ +/* /proc support */ +static struct proc_dir_entry *proc_dir = NULL; + +/* Subdriver registry */ static struct ibm_struct ibms[] = { { .name = "driver", @@ -2298,127 +2545,9 @@ static struct ibm_struct ibms[] = { }, }; -static int dispatch_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - struct ibm_struct *ibm = data; - int len; - - if (!ibm || !ibm->read) - return -EINVAL; - - len = ibm->read(page); - if (len < 0) - return len; - - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - - return len; -} - -static int dispatch_write(struct file *file, const char __user * userbuf, - unsigned long count, void *data) -{ - struct ibm_struct *ibm = data; - char *kernbuf; - int ret; - - if (!ibm || !ibm->write) - return -EINVAL; - - kernbuf = kmalloc(count + 2, GFP_KERNEL); - if (!kernbuf) - return -ENOMEM; - - if (copy_from_user(kernbuf, userbuf, count)) { - kfree(kernbuf); - return -EFAULT; - } - - kernbuf[count] = 0; - strcat(kernbuf, ","); - ret = ibm->write(kernbuf); - if (ret == 0) - ret = count; - - kfree(kernbuf); - - return ret; -} - -static void dispatch_notify(acpi_handle handle, u32 event, void *data) -{ - struct ibm_struct *ibm = data; - - if (!ibm || !ibm->notify) - return; - - ibm->notify(ibm, event); -} - -static int __init setup_notify(struct ibm_struct *ibm) -{ - acpi_status status; - int ret; - - if (!*ibm->handle) - return 0; - - ret = acpi_bus_get_device(*ibm->handle, &ibm->device); - if (ret < 0) { - printk(IBM_ERR "%s device not present\n", ibm->name); - return 0; - } - - acpi_driver_data(ibm->device) = ibm; - sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); - - status = acpi_install_notify_handler(*ibm->handle, ibm->type, - dispatch_notify, ibm); - if (ACPI_FAILURE(status)) { - printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", - ibm->name, status); - return -ENODEV; - } - ibm->notify_installed = 1; - return 0; -} - -static int __init ibm_device_add(struct acpi_device *device) -{ - return 0; -} - -static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) -{ - int ret; - - ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); - if (!ibm->driver) { - printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); - return -1; - } - - sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); - ibm->driver->ids = ibm->hid; - ibm->driver->ops.add = &ibm_device_add; - - ret = acpi_bus_register_driver(ibm->driver); - if (ret < 0) { - printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", - ibm->hid, ret); - kfree(ibm->driver); - } - - return ret; -} +/* + * Module and infrastructure proble, init and exit handling + */ static int __init ibm_init(struct ibm_struct *ibm) { @@ -2486,27 +2615,35 @@ static void ibm_exit(struct ibm_struct *ibm) } } -static void __init ibm_handle_init(char *name, - acpi_handle * handle, acpi_handle parent, - char **paths, int num_paths, char **path) +/* Probing */ + +static char *ibm_thinkpad_ec_found = NULL; + +static char* __init check_dmi_for_ec(void) { - int i; - acpi_status status; + struct dmi_device *dev = NULL; + char ec_fw_string[18]; - for (i = 0; i < num_paths; i++) { - status = acpi_get_handle(parent, paths[i], handle); - if (ACPI_SUCCESS(status)) { - *path = paths[i]; - return; + /* + * ThinkPad T23 or newer, A31 or newer, R50e or newer, + * X32 or newer, all Z series; Some models must have an + * up-to-date BIOS or they will not be detected. + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + */ + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { + if (sscanf(dev->name, + "IBM ThinkPad Embedded Controller -[%17c", + ec_fw_string) == 1) { + ec_fw_string[sizeof(ec_fw_string) - 1] = 0; + ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; + return kstrdup(ec_fw_string, GFP_KERNEL); } } - - *handle = NULL; + return NULL; } -#define IBM_HANDLE_INIT(object) \ - ibm_handle_init(#object, &object##_handle, *object##_parent, \ - object##_paths, ARRAY_SIZE(object##_paths), &object##_path) +/* Module init, exit, parameters */ static int __init set_ibm_param(const char *val, struct kernel_param *kp) { @@ -2524,6 +2661,9 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) return -EINVAL; } +static int experimental; +module_param(experimental, int, 0); + #define IBM_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0) @@ -2545,44 +2685,6 @@ IBM_PARAM(brightness); IBM_PARAM(volume); IBM_PARAM(fan); -static void acpi_ibm_exit(void) -{ - int i; - - for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) - ibm_exit(&ibms[i]); - - if (proc_dir) - remove_proc_entry(IBM_DIR, acpi_root_dir); - - if (ibm_thinkpad_ec_found) - kfree(ibm_thinkpad_ec_found); -} - -static char* __init check_dmi_for_ec(void) -{ - struct dmi_device *dev = NULL; - char ec_fw_string[18]; - - /* - * ThinkPad T23 or newer, A31 or newer, R50e or newer, - * X32 or newer, all Z series; Some models must have an - * up-to-date BIOS or they will not be detected. - * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs - */ - while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { - if (sscanf(dev->name, - "IBM ThinkPad Embedded Controller -[%17c", - ec_fw_string) == 1) { - ec_fw_string[sizeof(ec_fw_string) - 1] = 0; - ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; - return kstrdup(ec_fw_string, GFP_KERNEL); - } - } - return NULL; -} - static int __init acpi_ibm_init(void) { int ret, i; @@ -2648,5 +2750,19 @@ static int __init acpi_ibm_init(void) return 0; } +static void acpi_ibm_exit(void) +{ + int i; + + for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) + ibm_exit(&ibms[i]); + + if (proc_dir) + remove_proc_entry(IBM_DIR, acpi_root_dir); + + if (ibm_thinkpad_ec_found) + kfree(ibm_thinkpad_ec_found); +} + module_init(acpi_ibm_init); module_exit(acpi_ibm_exit); -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/5] ACPI: ibm-acpi: organize code @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Shuffle code around to better organize the driver code inside the ibm-acpi.c file. This patch adds no functional changes. It is pure fluff that will make me a bit more productive. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- drivers/acpi/ibm_acpi.c | 1382 +++++++++++++++++++++++++---------------------- 1 files changed, 749 insertions(+), 633 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index bfa1b09..3158fc3 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -87,8 +87,17 @@ MODULE_LICENSE("GPL"); #define __unused __attribute__ ((unused)) -static int experimental; -module_param(experimental, int, 0); +/**************************************************************************** + **************************************************************************** + * + * ACPI Helpers and device model + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ACPI basic handles + */ static acpi_handle root_handle = NULL; @@ -105,183 +114,31 @@ IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */ "\\_SB.PCI0.ICH3.EC0", /* R31 */ "\\_SB.PCI0.LPC.EC", /* all others */ - ); + ); -IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ - "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ - "\\_SB.PCI0.VID0", /* 770e */ - "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ - "\\_SB.PCI0.AGP.VID", /* all others */ - ); /* R30, R31 */ +IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ +IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + +/************************************************************************* + * Misc ACPI handles + */ IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ "\\CMS", /* R40, R40e */ - ); /* all others */ -#ifdef CONFIG_ACPI_IBM_DOCK -IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ - "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ - "\\_SB.PCI0.PCI1.DOCK", /* all others */ - "\\_SB.PCI.ISA.SLCE", /* 570 */ - ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ -#endif -#ifdef CONFIG_ACPI_IBM_BAY -IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ - "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ - "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ - "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ - ); /* A21e, R30, R31 */ - -IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ - "_EJ0", /* all others */ - ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ - -IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ - "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ - "_EJ0", /* 770x */ - ); /* all others */ -#endif /* CONFIG_ACPI_IBM_BAY */ - -/* don't list other alternatives as we install a notify handler on the 570 */ -IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ + ); /* all others */ IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ "^HKEY", /* R30, R31 */ "HKEY", /* all others */ - ); /* 570 */ - -IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ -IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ - -IBM_HANDLE(led, ec, "SLED", /* 570 */ - "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - "LED", /* all others */ - ); /* R30, R31 */ - -IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ -IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ -IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ + ); /* 570 */ -IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ - "\\FSPD", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ - "JFNS", /* 770x-JL */ - ); /* all others */ -/* - * FAN ACCESS MODES - * - * IBMACPI_FAN_RD_ACPI_GFAN: - * ACPI GFAN method: returns fan level - * - * see IBMACPI_FAN_WR_ACPI_SFAN - * EC 0x2f not available if GFAN exists - * - * IBMACPI_FAN_WR_ACPI_SFAN: - * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) - * - * EC 0x2f might be available *for reading*, but never for writing. - * - * IBMACPI_FAN_WR_TPEC: - * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported - * on almost all ThinkPads - * - * Fan speed changes of any sort (including those caused by the - * disengaged mode) are usually done slowly by the firmware as the - * maximum ammount of fan duty cycle change per second seems to be - * limited. - * - * Reading is not available if GFAN exists. - * Writing is not available if SFAN exists. - * - * Bits - * 7 automatic mode engaged; - * (default operation mode of the ThinkPad) - * fan level is ignored in this mode. - * 6 disengage mode (takes precedence over bit 7); - * not available on all thinkpads. May disable - * the tachometer, and speeds up fan to 100% duty-cycle, - * which speeds it up far above the standard RPM - * levels. It is not impossible that it could cause - * hardware damage. - * 5-3 unused in some models. Extra bits for fan level - * in others, but still useless as all values above - * 7 map to the same speed as level 7 in these models. - * 2-0 fan level (0..7 usually) - * 0x00 = stop - * 0x07 = max (set when temperatures critical) - * Some ThinkPads may have other levels, see - * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) - * - * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at - * boot. Apparently the EC does not intialize it, so unless ACPI DSDT - * does so, its initial value is meaningless (0x07). - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * ---- - * - * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): - * Main fan tachometer reading (in RPM) - * - * This register is present on all ThinkPads with a new-style EC, and - * it is known not to be present on the A21m/e, and T22, as there is - * something else in offset 0x84 according to the ACPI DSDT. Other - * ThinkPads from this same time period (and earlier) probably lack the - * tachometer as well. - * - * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare - * was never fixed by IBM to report the EC firmware version string - * probably support the tachometer (like the early X models), so - * detecting it is quite hard. We need more data to know for sure. - * - * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings - * might result. - * - * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this - * register is not invalidated in ThinkPads that disable tachometer - * readings. Thus, the tachometer readings go stale. - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * IBMACPI_FAN_WR_ACPI_FANS: - * ThinkPad X31, X40, X41. Not available in the X60. - * - * FANS ACPI handle: takes three arguments: low speed, medium speed, - * high speed. ACPI DSDT seems to map these three speeds to levels - * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH - * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") - * - * The speeds are stored on handles - * (FANA:FAN9), (FANC:FANB), (FANE:FAND). - * - * There are three default speed sets, acessible as handles: - * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H - * - * ACPI DSDT switches which set is in use depending on various - * factors. - * - * IBMACPI_FAN_WR_TPEC is also available and should be used to - * command the fan. The X31/X40/X41 seems to have 8 fan levels, - * but the ACPI tables just mention level 7. +/************************************************************************* + * ACPI helpers */ -static char *ibm_thinkpad_ec_found = NULL; - -static struct proc_dir_entry *proc_dir = NULL; - -static struct backlight_device *ibm_backlight_device = NULL; - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -371,6 +228,198 @@ static void __unused acpi_print_int(acpi_handle handle, char *method) printk(IBM_ERR "error calling %s\n", method); } +static int acpi_ec_read(int i, u8 * p) +{ + int v; + + if (ecrd_handle) { + if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) + return 0; + *p = v; + } else { + if (ec_read(i, p) < 0) + return 0; + } + + return 1; +} + +static int acpi_ec_write(int i, u8 v) +{ + if (ecwr_handle) { + if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) + return 0; + } else { + if (ec_write(i, v) < 0) + return 0; + } + + return 1; +} + +static int _sta(acpi_handle handle) +{ + int status; + + if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) + status = 0; + + return status; +} + +/************************************************************************* + * ACPI device model + */ + +static void __init ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path) +{ + int i; + acpi_status status; + + for (i = 0; i < num_paths; i++) { + status = acpi_get_handle(parent, paths[i], handle); + if (ACPI_SUCCESS(status)) { + *path = paths[i]; + return; + } + } + + *handle = NULL; +} + +static void dispatch_notify(acpi_handle handle, u32 event, void *data) +{ + struct ibm_struct *ibm = data; + + if (!ibm || !ibm->notify) + return; + + ibm->notify(ibm, event); +} + +static int __init setup_notify(struct ibm_struct *ibm) +{ + acpi_status status; + int ret; + + if (!*ibm->handle) + return 0; + + ret = acpi_bus_get_device(*ibm->handle, &ibm->device); + if (ret < 0) { + printk(IBM_ERR "%s device not present\n", ibm->name); + return 0; + } + + acpi_driver_data(ibm->device) = ibm; + sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); + + status = acpi_install_notify_handler(*ibm->handle, ibm->type, + dispatch_notify, ibm); + if (ACPI_FAILURE(status)) { + printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", + ibm->name, status); + return -ENODEV; + } + ibm->notify_installed = 1; + return 0; +} + +static int __init ibm_device_add(struct acpi_device *device) +{ + return 0; +} + +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) +{ + int ret; + + ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); + if (!ibm->driver) { + printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); + return -1; + } + + sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); + ibm->driver->ids = ibm->hid; + ibm->driver->ops.add = &ibm_device_add; + + ret = acpi_bus_register_driver(ibm->driver); + if (ret < 0) { + printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", + ibm->hid, ret); + kfree(ibm->driver); + } + + return ret; +} + + +/**************************************************************************** + **************************************************************************** + * + * Procfs Helpers + * + **************************************************************************** + ****************************************************************************/ + +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + struct ibm_struct *ibm = data; + int len; + + if (!ibm || !ibm->read) + return -EINVAL; + + len = ibm->read(page); + if (len < 0) + return len; + + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data) +{ + struct ibm_struct *ibm = data; + char *kernbuf; + int ret; + + if (!ibm || !ibm->write) + return -EINVAL; + + kernbuf = kmalloc(count + 2, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; + + if (copy_from_user(kernbuf, userbuf, count)) { + kfree(kernbuf); + return -EFAULT; + } + + kernbuf[count] = 0; + strcat(kernbuf, ","); + ret = ibm->write(kernbuf); + if (ret == 0) + ret = count; + + kfree(kernbuf); + + return ret; +} + static char *next_cmd(char **cmds) { char *start = *cmds; @@ -387,6 +436,19 @@ static char *next_cmd(char **cmds) return start; } + +/**************************************************************************** + **************************************************************************** + * + * Subdrivers + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ibm-acpi init subdriver + */ + static int ibm_acpi_driver_init(void) { printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); @@ -409,11 +471,51 @@ static int ibm_acpi_driver_read(char *p) return len; } +/************************************************************************* + * Hotkey subdriver + */ + static int hotkey_supported; static int hotkey_mask_supported; static int hotkey_orig_status; static int hotkey_orig_mask; +static int hotkey_init(void) +{ + /* hotkey not supported on 570 */ + hotkey_supported = hkey_handle != NULL; + + if (hotkey_supported) { + /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + A30, R30, R31, T20-22, X20-21, X22-24 */ + hotkey_mask_supported = + acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); + + if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) + return -ENODEV; + } + + return 0; +} + +static void hotkey_exit(void) +{ + if (hotkey_supported) + hotkey_set(hotkey_orig_status, hotkey_orig_mask); +} + +static void hotkey_notify(struct ibm_struct *ibm, u32 event) +{ + int hkey; + + if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) + acpi_bus_generate_event(ibm->device, event, hkey); + else { + printk(IBM_ERR "unknown hotkey event %d\n", event); + acpi_bus_generate_event(ibm->device, event, 0); + } +} + static int hotkey_get(int *status, int *mask) { if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) @@ -444,24 +546,6 @@ static int hotkey_set(int status, int mask) return 1; } -static int hotkey_init(void) -{ - /* hotkey not supported on 570 */ - hotkey_supported = hkey_handle != NULL; - - if (hotkey_supported) { - /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - A30, R30, R31, T20-22, X20-21, X22-24 */ - hotkey_mask_supported = - acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); - - if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) - return -ENODEV; - } - - return 0; -} - static int hotkey_read(char *p) { int status, mask; @@ -523,23 +607,9 @@ static int hotkey_write(char *buf) return 0; } -static void hotkey_exit(void) -{ - if (hotkey_supported) - hotkey_set(hotkey_orig_status, hotkey_orig_mask); -} - -static void hotkey_notify(struct ibm_struct *ibm, u32 event) -{ - int hkey; - - if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) - acpi_bus_generate_event(ibm->device, event, hkey); - else { - printk(IBM_ERR "unknown hotkey event %d\n", event); - acpi_bus_generate_event(ibm->device, event, 0); - } -} +/************************************************************************* + * Bluetooth subdriver + */ static int bluetooth_supported; @@ -606,6 +676,10 @@ static int bluetooth_write(char *buf) return 0; } +/************************************************************************* + * Wan subdriver + */ + static int wan_supported; static int wan_init(void) @@ -668,9 +742,22 @@ static int wan_write(char *buf) return 0; } +/************************************************************************* + * Video subdriver + */ + static enum video_access_mode video_supported; static int video_orig_autosw; +IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ + "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ + "\\_SB.PCI0.VID0", /* 770e */ + "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ + "\\_SB.PCI0.AGP.VID", /* all others */ + ); /* R30, R31 */ + +IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + static int video_init(void) { int ivga; @@ -695,6 +782,11 @@ static int video_init(void) return 0; } +static void video_exit(void) +{ + acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); +} + static int video_status(void) { int status = 0; @@ -736,33 +828,6 @@ static int video_autosw(void) return autosw & 1; } -static int video_read(char *p) -{ - int status = video_status(); - int autosw = video_autosw(); - int len = 0; - - if (!video_supported) { - len += sprintf(p + len, "status:\t\tnot supported\n"); - return len; - } - - len += sprintf(p + len, "status:\t\tsupported\n"); - len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); - len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); - len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); - len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); - len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); - len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); - len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); - - return len; -} - static int video_switch(void) { int autosw = video_autosw(); @@ -812,6 +877,33 @@ static int video_switch2(int status) return ret; } +static int video_read(char *p) +{ + int status = video_status(); + int autosw = video_autosw(); + int len = 0; + + if (!video_supported) { + len += sprintf(p + len, "status:\t\tnot supported\n"); + return len; + } + + len += sprintf(p + len, "status:\t\tsupported\n"); + len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); + len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); + len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); + len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); + len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); + len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); + len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); + + return len; +} + static int video_write(char *buf) { char *cmd; @@ -862,14 +954,16 @@ static int video_write(char *buf) return 0; } -static void video_exit(void) -{ - acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); -} +/************************************************************************* + * Light (thinklight) subdriver + */ static int light_supported; static int light_status_supported; +IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ +IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ + static int light_init(void) { /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */ @@ -933,21 +1027,45 @@ static int light_write(char *buf) return 0; } -#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY) -static int _sta(acpi_handle handle) -{ - int status; - - if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) - status = 0; +/************************************************************************* + * Dock subdriver + */ - return status; -} -#endif +/* don't list other alternatives as we install a notify handler on the 570 */ +IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ #ifdef CONFIG_ACPI_IBM_DOCK + +IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ + "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ + "\\_SB.PCI0.PCI1.DOCK", /* all others */ + "\\_SB.PCI.ISA.SLCE", /* 570 */ + ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ + #define dock_docked() (_sta(dock_handle) & 1) +static void dock_notify(struct ibm_struct *ibm, u32 event) +{ + int docked = dock_docked(); + int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); + + if (event == 1 && !pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 1 && pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else if (event == 3 && docked) + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 3 && !docked) + acpi_bus_generate_event(ibm->device, event, 2); /* undock */ + else if (event == 0 && docked) + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else { + printk(IBM_ERR "unknown dock event %d, status %d\n", + event, _sta(dock_handle)); + acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ + } +} + static int dock_read(char *p) { int len = 0; @@ -987,28 +1105,11 @@ static int dock_write(char *buf) return 0; } -static void dock_notify(struct ibm_struct *ibm, u32 event) -{ - int docked = dock_docked(); - int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); +#endif /* CONFIG_ACPI_IBM_DOCK */ - if (event == 1 && !pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 1 && pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else if (event == 3 && docked) - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 3 && !docked) - acpi_bus_generate_event(ibm->device, event, 2); /* undock */ - else if (event == 0 && docked) - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else { - printk(IBM_ERR "unknown dock event %d, status %d\n", - event, _sta(dock_handle)); - acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ - } -} -#endif +/************************************************************************* + * Bay subdriver + */ #ifdef CONFIG_ACPI_IBM_BAY static int bay_status_supported; @@ -1016,6 +1117,21 @@ static int bay_status2_supported; static int bay_eject_supported; static int bay_eject2_supported; +IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ + "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ + "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ + "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ + ); /* A21e, R30, R31 */ +IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ + "_EJ0", /* all others */ + ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ +IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ + "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ + "_EJ0", /* 770x */ + ); /* all others */ + static int bay_init(void) { bay_status_supported = bay_handle && @@ -1031,6 +1147,11 @@ static int bay_init(void) return 0; } +static void bay_notify(struct ibm_struct *ibm, u32 event) +{ + acpi_bus_generate_event(ibm->device, event, 0); +} + #define bay_occupied(b) (_sta(b##_handle) & 1) static int bay_read(char *p) @@ -1081,12 +1202,19 @@ static int bay_write(char *buf) return 0; } +#endif /* CONFIG_ACPI_IBM_BAY */ -static void bay_notify(struct ibm_struct *ibm, u32 event) +/************************************************************************* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd) { - acpi_bus_generate_event(ibm->device, event, 0); + if (cmos_handle) + return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); + else + return 1; } -#endif /* CONFIG_ACPI_IBM_BAY */ static int cmos_read(char *p) { @@ -1104,14 +1232,6 @@ static int cmos_read(char *p) return len; } -static int cmos_eval(int cmos_cmd) -{ - if (cmos_handle) - return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); - else - return 1; -} - static int cmos_write(char *buf) { char *cmd; @@ -1134,8 +1254,18 @@ static int cmos_write(char *buf) return 0; } + +/************************************************************************* + * LED subdriver + */ + static enum led_access_mode led_supported; +IBM_HANDLE(led, ec, "SLED", /* 570 */ + "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + "LED", /* all others */ + ); /* R30, R31 */ + static int led_init(void) { if (!led_handle) @@ -1242,6 +1372,12 @@ static int led_write(char *buf) return 0; } +/************************************************************************* + * Beep subdriver + */ + +IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ + static int beep_read(char *p) { int len = 0; @@ -1277,34 +1413,9 @@ static int beep_write(char *buf) return 0; } -static int acpi_ec_read(int i, u8 * p) -{ - int v; - - if (ecrd_handle) { - if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) - return 0; - *p = v; - } else { - if (ec_read(i, p) < 0) - return 0; - } - - return 1; -} - -static int acpi_ec_write(int i, u8 v) -{ - if (ecwr_handle) { - if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) - return 0; - } else { - if (ec_write(i, v) < 0) - return 0; - } - - return 1; -} +/************************************************************************* + * Thermal subdriver + */ static enum thermal_access_mode thermal_read_mode; @@ -1446,6 +1557,10 @@ static int thermal_read(char *p) return len; } +/************************************************************************* + * EC Dump subdriver + */ + static u8 ecdump_regs[256]; static int ecdump_read(char *p) @@ -1505,6 +1620,52 @@ static int ecdump_write(char *buf) return 0; } +/************************************************************************* + * Backlight/brightness subdriver + */ + +static struct backlight_device *ibm_backlight_device = NULL; + +static struct backlight_ops ibm_backlight_data = { + .get_brightness = brightness_get, + .update_status = brightness_update_status, +}; + +static int brightness_init(void) +{ + int b; + + b = brightness_get(NULL); + if (b < 0) + return b; + + ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, + &ibm_backlight_data); + if (IS_ERR(ibm_backlight_device)) { + printk(IBM_ERR "Could not register backlight device\n"); + return PTR_ERR(ibm_backlight_device); + } + + ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.brightness = b; + backlight_update_status(ibm_backlight_device); + + return 0; +} + +static void brightness_exit(void) +{ + if (ibm_backlight_device) { + backlight_device_unregister(ibm_backlight_device); + ibm_backlight_device = NULL; + } +} + +static int brightness_update_status(struct backlight_device *bd) +{ + return brightness_set(bd->props.brightness); +} + static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1516,23 +1677,6 @@ static int brightness_get(struct backlight_device *bd) return level; } -static int brightness_read(char *p) -{ - int len = 0; - int level; - - if ((level = brightness_get(NULL)) < 0) { - len += sprintf(p + len, "level:\t\tunreadable\n"); - } else { - len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); - len += sprintf(p + len, "commands:\tup, down\n"); - len += sprintf(p + len, "commands:\tlevel <level>" - " (<level> is 0-7)\n"); - } - - return len; -} - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1540,8 +1684,7 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? - TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1553,6 +1696,23 @@ static int brightness_set(int value) return 0; } +static int brightness_read(char *p) +{ + int len = 0; + int level; + + if ((level = brightness_get(NULL)) < 0) { + len += sprintf(p + len, "level:\t\tunreadable\n"); + } else { + len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); + len += sprintf(p + len, "commands:\tup, down\n"); + len += sprintf(p + len, "commands:\tlevel <level>" + " (<level> is 0-7)\n"); + } + + return len; +} + static int brightness_write(char *buf) { int level; @@ -1580,45 +1740,9 @@ static int brightness_write(char *buf) return 0; } -static int brightness_update_status(struct backlight_device *bd) -{ - return brightness_set(bd->props.brightness); -} - -static struct backlight_ops ibm_backlight_data = { - .get_brightness = brightness_get, - .update_status = brightness_update_status, -}; - -static int brightness_init(void) -{ - int b; - - b = brightness_get(NULL); - if (b < 0) - return b; - - ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, - &ibm_backlight_data); - if (IS_ERR(ibm_backlight_device)) { - printk(IBM_ERR "Could not register backlight device\n"); - return PTR_ERR(ibm_backlight_device); - } - - ibm_backlight_device->props.max_brightness = 7; - ibm_backlight_device->props.brightness = b; - backlight_update_status(ibm_backlight_device); - - return 0; -} - -static void brightness_exit(void) -{ - if (ibm_backlight_device) { - backlight_device_unregister(ibm_backlight_device); - ibm_backlight_device = NULL; - } -} +/************************************************************************* + * Volume subdriver + */ static int volume_read(char *p) { @@ -1670,8 +1794,7 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? - TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; + cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1690,8 +1813,7 @@ static int volume_write(char *buf) } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? - TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; + cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -1702,6 +1824,111 @@ static int volume_write(char *buf) return 0; } + +/************************************************************************* + * Fan subdriver + */ + +/* + * FAN ACCESS MODES + * + * IBMACPI_FAN_RD_ACPI_GFAN: + * ACPI GFAN method: returns fan level + * + * see IBMACPI_FAN_WR_ACPI_SFAN + * EC 0x2f not available if GFAN exists + * + * IBMACPI_FAN_WR_ACPI_SFAN: + * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) + * + * EC 0x2f might be available *for reading*, but never for writing. + * + * IBMACPI_FAN_WR_TPEC: + * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported + * on almost all ThinkPads + * + * Fan speed changes of any sort (including those caused by the + * disengaged mode) are usually done slowly by the firmware as the + * maximum ammount of fan duty cycle change per second seems to be + * limited. + * + * Reading is not available if GFAN exists. + * Writing is not available if SFAN exists. + * + * Bits + * 7 automatic mode engaged; + * (default operation mode of the ThinkPad) + * fan level is ignored in this mode. + * 6 disengage mode (takes precedence over bit 7); + * not available on all thinkpads. May disable + * the tachometer, and speeds up fan to 100% duty-cycle, + * which speeds it up far above the standard RPM + * levels. It is not impossible that it could cause + * hardware damage. + * 5-3 unused in some models. Extra bits for fan level + * in others, but still useless as all values above + * 7 map to the same speed as level 7 in these models. + * 2-0 fan level (0..7 usually) + * 0x00 = stop + * 0x07 = max (set when temperatures critical) + * Some ThinkPads may have other levels, see + * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) + * + * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at + * boot. Apparently the EC does not intialize it, so unless ACPI DSDT + * does so, its initial value is meaningless (0x07). + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * ---- + * + * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): + * Main fan tachometer reading (in RPM) + * + * This register is present on all ThinkPads with a new-style EC, and + * it is known not to be present on the A21m/e, and T22, as there is + * something else in offset 0x84 according to the ACPI DSDT. Other + * ThinkPads from this same time period (and earlier) probably lack the + * tachometer as well. + * + * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare + * was never fixed by IBM to report the EC firmware version string + * probably support the tachometer (like the early X models), so + * detecting it is quite hard. We need more data to know for sure. + * + * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings + * might result. + * + * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this + * register is not invalidated in ThinkPads that disable tachometer + * readings. Thus, the tachometer readings go stale. + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * IBMACPI_FAN_WR_ACPI_FANS: + * ThinkPad X31, X40, X41. Not available in the X60. + * + * FANS ACPI handle: takes three arguments: low speed, medium speed, + * high speed. ACPI DSDT seems to map these three speeds to levels + * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH + * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") + * + * The speeds are stored on handles + * (FANA:FAN9), (FANC:FANB), (FANE:FAND). + * + * There are three default speed sets, acessible as handles: + * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H + * + * ACPI DSDT switches which set is in use depending on various + * factors. + * + * IBMACPI_FAN_WR_TPEC is also available and should be used to + * command the fan. The X31/X40/X41 seems to have 8 fan levels, + * but the ACPI tables just mention level 7. + */ + static enum fan_status_access_mode fan_status_access_mode; static enum fan_control_access_mode fan_control_access_mode; static enum fan_control_commands fan_control_commands; @@ -1713,6 +1940,14 @@ static void fan_watchdog_fire(struct work_struct *ignored); static int fan_watchdog_maxinterval; static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); +IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ +IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ + "\\FSPD", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ + "JFNS", /* 770x-JL */ + ); /* all others */ + static int fan_init(void) { fan_status_access_mode = IBMACPI_FAN_NONE; @@ -1828,6 +2063,12 @@ static int fan_get_status(u8 *status) return 0; } +static void fan_exit(void) +{ + cancel_delayed_work(&fan_watchdog_task); + flush_scheduled_work(); +} + static int fan_get_speed(unsigned int *speed) { u8 hi, lo; @@ -1851,10 +2092,14 @@ static int fan_get_speed(unsigned int *speed) return 0; } -static void fan_exit(void) +static void fan_watchdog_fire(struct work_struct *ignored) { - cancel_delayed_work(&fan_watchdog_task); - flush_scheduled_work(); + printk(IBM_NOTICE "fan watchdog: enabling fan\n"); + if (fan_set_enable()) { + printk(IBM_ERR "fan watchdog: error while enabling fan\n"); + /* reschedule for later */ + fan_watchdog_reset(); + } } static void fan_watchdog_reset(void) @@ -1876,90 +2121,6 @@ static void fan_watchdog_reset(void) fan_watchdog_active = 0; } -static int fan_read(char *p) -{ - int len = 0; - int rc; - u8 status; - unsigned int speed = 0; - - switch (fan_status_access_mode) { - case IBMACPI_FAN_RD_ACPI_GFAN: - /* 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - len += sprintf(p + len, "status:\t\t%s\n" - "level:\t\t%d\n", - (status != 0) ? "enabled" : "disabled", status); - break; - - case IBMACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - if (unlikely(!fan_control_status_known)) { - if (status != fan_control_initial_status) - fan_control_status_known = 1; - else - /* Return most likely status. In fact, it - * might be the only possible status */ - status = IBMACPI_FAN_EC_AUTO; - } - - len += sprintf(p + len, "status:\t\t%s\n", - (status != 0) ? "enabled" : "disabled"); - - /* No ThinkPad boots on disengaged mode, we can safely - * assume the tachometer is online if fan control status - * was unknown */ - if ((rc = fan_get_speed(&speed)) < 0) - return rc; - - len += sprintf(p + len, "speed:\t\t%d\n", speed); - - if (status & IBMACPI_FAN_EC_DISENGAGED) - /* Disengaged mode takes precedence */ - len += sprintf(p + len, "level:\t\tdisengaged\n"); - else if (status & IBMACPI_FAN_EC_AUTO) - len += sprintf(p + len, "level:\t\tauto\n"); - else - len += sprintf(p + len, "level:\t\t%d\n", status); - break; - - case IBMACPI_FAN_NONE: - default: - len += sprintf(p + len, "status:\t\tnot supported\n"); - } - - if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { - len += sprintf(p + len, "commands:\tlevel <level>"); - - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_SFAN: - len += sprintf(p + len, " (<level> is 0-7)\n"); - break; - - default: - len += sprintf(p + len, " (<level> is 0-7, " - "auto, disengaged)\n"); - break; - } - } - - if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) - len += sprintf(p + len, "commands:\tenable, disable\n" - "commands:\twatchdog <timeout> (<timeout> is 0 (off), " - "1-120 (seconds))\n"); - - if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) - len += sprintf(p + len, "commands:\tspeed <speed>" - " (<speed> is 0-65535)\n"); - - return len; -} - static int fan_set_level(int level) { switch (fan_control_access_mode) { @@ -2071,6 +2232,90 @@ static int fan_set_speed(int speed) return 0; } +static int fan_read(char *p) +{ + int len = 0; + int rc; + u8 status; + unsigned int speed = 0; + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + len += sprintf(p + len, "status:\t\t%s\n" + "level:\t\t%d\n", + (status != 0) ? "enabled" : "disabled", status); + break; + + case IBMACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + if (unlikely(!fan_control_status_known)) { + if (status != fan_control_initial_status) + fan_control_status_known = 1; + else + /* Return most likely status. In fact, it + * might be the only possible status */ + status = IBMACPI_FAN_EC_AUTO; + } + + len += sprintf(p + len, "status:\t\t%s\n", + (status != 0) ? "enabled" : "disabled"); + + /* No ThinkPad boots on disengaged mode, we can safely + * assume the tachometer is online if fan control status + * was unknown */ + if ((rc = fan_get_speed(&speed)) < 0) + return rc; + + len += sprintf(p + len, "speed:\t\t%d\n", speed); + + if (status & IBMACPI_FAN_EC_DISENGAGED) + /* Disengaged mode takes precedence */ + len += sprintf(p + len, "level:\t\tdisengaged\n"); + else if (status & IBMACPI_FAN_EC_AUTO) + len += sprintf(p + len, "level:\t\tauto\n"); + else + len += sprintf(p + len, "level:\t\t%d\n", status); + break; + + case IBMACPI_FAN_NONE: + default: + len += sprintf(p + len, "status:\t\tnot supported\n"); + } + + if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { + len += sprintf(p + len, "commands:\tlevel <level>"); + + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_SFAN: + len += sprintf(p + len, " (<level> is 0-7)\n"); + break; + + default: + len += sprintf(p + len, " (<level> is 0-7, " + "auto, disengaged)\n"); + break; + } + } + + if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) + len += sprintf(p + len, "commands:\tenable, disable\n" + "commands:\twatchdog <timeout> (<timeout> is 0 (off), " + "1-120 (seconds))\n"); + + if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) + len += sprintf(p + len, "commands:\tspeed <speed>" + " (<speed> is 0-65535)\n"); + + return len; +} + static int fan_write_cmd_level(const char *cmd, int *rc) { int level; @@ -2168,16 +2413,18 @@ static int fan_write(char *buf) return rc; } -static void fan_watchdog_fire(struct work_struct *ignored) -{ - printk(IBM_NOTICE "fan watchdog: enabling fan\n"); - if (fan_set_enable()) { - printk(IBM_ERR "fan watchdog: error while enabling fan\n"); - /* reschedule for later */ - fan_watchdog_reset(); - } -} +/**************************************************************************** + **************************************************************************** + * + * Infrastructure + * + **************************************************************************** + ****************************************************************************/ +/* /proc support */ +static struct proc_dir_entry *proc_dir = NULL; + +/* Subdriver registry */ static struct ibm_struct ibms[] = { { .name = "driver", @@ -2298,127 +2545,9 @@ static struct ibm_struct ibms[] = { }, }; -static int dispatch_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - struct ibm_struct *ibm = data; - int len; - - if (!ibm || !ibm->read) - return -EINVAL; - - len = ibm->read(page); - if (len < 0) - return len; - - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - - return len; -} - -static int dispatch_write(struct file *file, const char __user * userbuf, - unsigned long count, void *data) -{ - struct ibm_struct *ibm = data; - char *kernbuf; - int ret; - - if (!ibm || !ibm->write) - return -EINVAL; - - kernbuf = kmalloc(count + 2, GFP_KERNEL); - if (!kernbuf) - return -ENOMEM; - - if (copy_from_user(kernbuf, userbuf, count)) { - kfree(kernbuf); - return -EFAULT; - } - - kernbuf[count] = 0; - strcat(kernbuf, ","); - ret = ibm->write(kernbuf); - if (ret == 0) - ret = count; - - kfree(kernbuf); - - return ret; -} - -static void dispatch_notify(acpi_handle handle, u32 event, void *data) -{ - struct ibm_struct *ibm = data; - - if (!ibm || !ibm->notify) - return; - - ibm->notify(ibm, event); -} - -static int __init setup_notify(struct ibm_struct *ibm) -{ - acpi_status status; - int ret; - - if (!*ibm->handle) - return 0; - - ret = acpi_bus_get_device(*ibm->handle, &ibm->device); - if (ret < 0) { - printk(IBM_ERR "%s device not present\n", ibm->name); - return 0; - } - - acpi_driver_data(ibm->device) = ibm; - sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); - - status = acpi_install_notify_handler(*ibm->handle, ibm->type, - dispatch_notify, ibm); - if (ACPI_FAILURE(status)) { - printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", - ibm->name, status); - return -ENODEV; - } - ibm->notify_installed = 1; - return 0; -} - -static int __init ibm_device_add(struct acpi_device *device) -{ - return 0; -} - -static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) -{ - int ret; - - ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); - if (!ibm->driver) { - printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); - return -1; - } - - sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); - ibm->driver->ids = ibm->hid; - ibm->driver->ops.add = &ibm_device_add; - - ret = acpi_bus_register_driver(ibm->driver); - if (ret < 0) { - printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", - ibm->hid, ret); - kfree(ibm->driver); - } - - return ret; -} +/* + * Module and infrastructure proble, init and exit handling + */ static int __init ibm_init(struct ibm_struct *ibm) { @@ -2486,27 +2615,35 @@ static void ibm_exit(struct ibm_struct *ibm) } } -static void __init ibm_handle_init(char *name, - acpi_handle * handle, acpi_handle parent, - char **paths, int num_paths, char **path) +/* Probing */ + +static char *ibm_thinkpad_ec_found = NULL; + +static char* __init check_dmi_for_ec(void) { - int i; - acpi_status status; + struct dmi_device *dev = NULL; + char ec_fw_string[18]; - for (i = 0; i < num_paths; i++) { - status = acpi_get_handle(parent, paths[i], handle); - if (ACPI_SUCCESS(status)) { - *path = paths[i]; - return; + /* + * ThinkPad T23 or newer, A31 or newer, R50e or newer, + * X32 or newer, all Z series; Some models must have an + * up-to-date BIOS or they will not be detected. + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + */ + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { + if (sscanf(dev->name, + "IBM ThinkPad Embedded Controller -[%17c", + ec_fw_string) == 1) { + ec_fw_string[sizeof(ec_fw_string) - 1] = 0; + ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; + return kstrdup(ec_fw_string, GFP_KERNEL); } } - - *handle = NULL; + return NULL; } -#define IBM_HANDLE_INIT(object) \ - ibm_handle_init(#object, &object##_handle, *object##_parent, \ - object##_paths, ARRAY_SIZE(object##_paths), &object##_path) +/* Module init, exit, parameters */ static int __init set_ibm_param(const char *val, struct kernel_param *kp) { @@ -2524,6 +2661,9 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) return -EINVAL; } +static int experimental; +module_param(experimental, int, 0); + #define IBM_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0) @@ -2545,44 +2685,6 @@ IBM_PARAM(brightness); IBM_PARAM(volume); IBM_PARAM(fan); -static void acpi_ibm_exit(void) -{ - int i; - - for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) - ibm_exit(&ibms[i]); - - if (proc_dir) - remove_proc_entry(IBM_DIR, acpi_root_dir); - - if (ibm_thinkpad_ec_found) - kfree(ibm_thinkpad_ec_found); -} - -static char* __init check_dmi_for_ec(void) -{ - struct dmi_device *dev = NULL; - char ec_fw_string[18]; - - /* - * ThinkPad T23 or newer, A31 or newer, R50e or newer, - * X32 or newer, all Z series; Some models must have an - * up-to-date BIOS or they will not be detected. - * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs - */ - while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { - if (sscanf(dev->name, - "IBM ThinkPad Embedded Controller -[%17c", - ec_fw_string) == 1) { - ec_fw_string[sizeof(ec_fw_string) - 1] = 0; - ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; - return kstrdup(ec_fw_string, GFP_KERNEL); - } - } - return NULL; -} - static int __init acpi_ibm_init(void) { int ret, i; @@ -2648,5 +2750,19 @@ static int __init acpi_ibm_init(void) return 0; } +static void acpi_ibm_exit(void) +{ + int i; + + for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) + ibm_exit(&ibms[i]); + + if (proc_dir) + remove_proc_entry(IBM_DIR, acpi_root_dir); + + if (ibm_thinkpad_ec_found) + kfree(ibm_thinkpad_ec_found); +} + module_init(acpi_ibm_init); module_exit(acpi_ibm_exit); -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 4/5] ACPI: ibm-acpi: update copyright notice @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Update copyright and license info on the source code comments. No functional changes. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- drivers/acpi/ibm_acpi.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 3158fc3..dd36be0 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -3,7 +3,7 @@ * * * Copyright (C) 2004-2005 Borislav Deianov <borislav-iA+eEnwkJgzk1uMJSBkQmQ@public.gmane.org> - * Copyright (C) 2006 Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,7 +17,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. */ #define IBM_VERSION "0.13" -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 4/5] ACPI: ibm-acpi: update copyright notice @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Update copyright and license info on the source code comments. No functional changes. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- drivers/acpi/ibm_acpi.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 3158fc3..dd36be0 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -3,7 +3,7 @@ * * * Copyright (C) 2004-2005 Borislav Deianov <borislav-iA+eEnwkJgzk1uMJSBkQmQ@public.gmane.org> - * Copyright (C) 2006 Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,7 +17,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. */ #define IBM_VERSION "0.13" -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 5/5] ACPI: ibm-acpi: update documentation @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Update documentation header, and relocate a hunk of text that was missplaced. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- Documentation/ibm-acpi.txt | 85 +++++++++++++------------------------------- 1 files changed, 25 insertions(+), 60 deletions(-) diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt index 0132d36..16f1c77 100644 --- a/Documentation/ibm-acpi.txt +++ b/Documentation/ibm-acpi.txt @@ -1,16 +1,17 @@ IBM ThinkPad ACPI Extras Driver - Version 0.12 - 17 August 2005 + Version 0.13 + 31 December 2006 Borislav Deianov <borislav-iA+eEnwkJgzk1uMJSBkQmQ@public.gmane.org> + Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> http://ibm-acpi.sf.net/ This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports various features of these laptops which are accessible through the -ACPI framework but not otherwise supported by the generic Linux ACPI -drivers. +ACPI framework but not otherwise fully supported by the generic Linux +ACPI drivers. Status @@ -638,6 +639,26 @@ The ThinkPad's ACPI DSDT code will reprogram the fan on its own when certain conditions are met. It will override any fan programming done through ibm-acpi. +The ibm-acpi kernel driver can be programmed to revert the fan level +to a safe setting if userspace does not issue one of the fan commands: +"enable", "disable", "level" or "watchdog" within a configurable +ammount of time. To do this, use the "watchdog" command. + + echo 'watchdog <interval>' > /proc/acpi/ibm/fan + +Interval is the ammount of time in seconds to wait for one of the +above mentioned fan commands before reseting the fan level to a safe +one. If set to zero, the watchdog is disabled (default). When the +watchdog timer runs out, it does the exact equivalent of the "enable" +fan command. + +Note that the watchdog timer stops after it enables the fan. It will +be rearmed again automatically (using the same interval) when one of +the above mentioned fan commands is received. The fan watchdog is, +therefore, not suitable to protect against fan mode changes made +through means other than the "enable", "disable", and "level" fan +commands. + EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan --------------------------------------- @@ -670,59 +691,3 @@ example: modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable -The ibm-acpi kernel driver can be programmed to revert the fan level -to a safe setting if userspace does not issue one of the fan commands: -"enable", "disable", "level" or "watchdog" within a configurable -ammount of time. To do this, use the "watchdog" command. - - echo 'watchdog <interval>' > /proc/acpi/ibm/fan - -Interval is the ammount of time in seconds to wait for one of the -above mentioned fan commands before reseting the fan level to a safe -one. If set to zero, the watchdog is disabled (default). When the -watchdog timer runs out, it does the exact equivalent of the "enable" -fan command. - -Note that the watchdog timer stops after it enables the fan. It will -be rearmed again automatically (using the same interval) when one of -the above mentioned fan commands is received. The fan watchdog is, -therefore, not suitable to protect against fan mode changes made -through means other than the "enable", "disable", and "level" fan -commands. - - -Example Configuration ---------------------- - -The ACPI support in the kernel is intended to be used in conjunction -with a user-space daemon, acpid. The configuration files for this -daemon control what actions are taken in response to various ACPI -events. An example set of configuration files are included in the -config/ directory of the tarball package available on the web -site. Note that these are provided for illustration purposes only and -may need to be adapted to your particular setup. - -The following utility scripts are used by the example action -scripts (included with ibm-acpi for completeness): - - /usr/local/sbin/idectl -- from the hdparm source distribution, - see http://www.ibiblio.org/pub/Linux/system/hardware - /usr/local/sbin/laptop_mode -- from the Linux kernel source - distribution, see Documentation/laptop-mode.txt - /sbin/service -- comes with Redhat/Fedora distributions - /usr/sbin/hibernate -- from the Software Suspend 2 distribution, - see http://softwaresuspend.berlios.de/ - -Toan T Nguyen <ntt-JAjqph6Yjy/HDPtHwZCLWA@public.gmane.org> notes that Suse uses the -powersave program to suspend ('powersave --suspend-to-ram') or -hibernate ('powersave --suspend-to-disk'). This means that the -hibernate script is not needed on that distribution. - -Henrik Brix Andersen <brix-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org> has written a Gentoo ACPI event -handler script for the X31. You can get the latest version from -http://dev.gentoo.org/~brix/files/x31.sh - -David Schweikert <dws-D+RCJvqCTXrtRgLqZ5aouw@public.gmane.org> has written an alternative blank.sh -script which works on Debian systems. This scripts has now been -extended to also work on Fedora systems and included as the default -blank.sh in the distribution. -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 5/5] ACPI: ibm-acpi: update documentation @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, Henrique de Moraes Holschuh, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f Update documentation header, and relocate a hunk of text that was missplaced. Signed-off-by: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> --- Documentation/ibm-acpi.txt | 85 +++++++++++++------------------------------- 1 files changed, 25 insertions(+), 60 deletions(-) diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt index 0132d36..16f1c77 100644 --- a/Documentation/ibm-acpi.txt +++ b/Documentation/ibm-acpi.txt @@ -1,16 +1,17 @@ IBM ThinkPad ACPI Extras Driver - Version 0.12 - 17 August 2005 + Version 0.13 + 31 December 2006 Borislav Deianov <borislav-iA+eEnwkJgzk1uMJSBkQmQ@public.gmane.org> + Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> http://ibm-acpi.sf.net/ This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports various features of these laptops which are accessible through the -ACPI framework but not otherwise supported by the generic Linux ACPI -drivers. +ACPI framework but not otherwise fully supported by the generic Linux +ACPI drivers. Status @@ -638,6 +639,26 @@ The ThinkPad's ACPI DSDT code will reprogram the fan on its own when certain conditions are met. It will override any fan programming done through ibm-acpi. +The ibm-acpi kernel driver can be programmed to revert the fan level +to a safe setting if userspace does not issue one of the fan commands: +"enable", "disable", "level" or "watchdog" within a configurable +ammount of time. To do this, use the "watchdog" command. + + echo 'watchdog <interval>' > /proc/acpi/ibm/fan + +Interval is the ammount of time in seconds to wait for one of the +above mentioned fan commands before reseting the fan level to a safe +one. If set to zero, the watchdog is disabled (default). When the +watchdog timer runs out, it does the exact equivalent of the "enable" +fan command. + +Note that the watchdog timer stops after it enables the fan. It will +be rearmed again automatically (using the same interval) when one of +the above mentioned fan commands is received. The fan watchdog is, +therefore, not suitable to protect against fan mode changes made +through means other than the "enable", "disable", and "level" fan +commands. + EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan --------------------------------------- @@ -670,59 +691,3 @@ example: modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable -The ibm-acpi kernel driver can be programmed to revert the fan level -to a safe setting if userspace does not issue one of the fan commands: -"enable", "disable", "level" or "watchdog" within a configurable -ammount of time. To do this, use the "watchdog" command. - - echo 'watchdog <interval>' > /proc/acpi/ibm/fan - -Interval is the ammount of time in seconds to wait for one of the -above mentioned fan commands before reseting the fan level to a safe -one. If set to zero, the watchdog is disabled (default). When the -watchdog timer runs out, it does the exact equivalent of the "enable" -fan command. - -Note that the watchdog timer stops after it enables the fan. It will -be rearmed again automatically (using the same interval) when one of -the above mentioned fan commands is received. The fan watchdog is, -therefore, not suitable to protect against fan mode changes made -through means other than the "enable", "disable", and "level" fan -commands. - - -Example Configuration ---------------------- - -The ACPI support in the kernel is intended to be used in conjunction -with a user-space daemon, acpid. The configuration files for this -daemon control what actions are taken in response to various ACPI -events. An example set of configuration files are included in the -config/ directory of the tarball package available on the web -site. Note that these are provided for illustration purposes only and -may need to be adapted to your particular setup. - -The following utility scripts are used by the example action -scripts (included with ibm-acpi for completeness): - - /usr/local/sbin/idectl -- from the hdparm source distribution, - see http://www.ibiblio.org/pub/Linux/system/hardware - /usr/local/sbin/laptop_mode -- from the Linux kernel source - distribution, see Documentation/laptop-mode.txt - /sbin/service -- comes with Redhat/Fedora distributions - /usr/sbin/hibernate -- from the Software Suspend 2 distribution, - see http://softwaresuspend.berlios.de/ - -Toan T Nguyen <ntt-JAjqph6Yjy/HDPtHwZCLWA@public.gmane.org> notes that Suse uses the -powersave program to suspend ('powersave --suspend-to-ram') or -hibernate ('powersave --suspend-to-disk'). This means that the -hibernate script is not needed on that distribution. - -Henrik Brix Andersen <brix-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org> has written a Gentoo ACPI event -handler script for the X31. You can get the latest version from -http://dev.gentoo.org/~brix/files/x31.sh - -David Schweikert <dws-D+RCJvqCTXrtRgLqZ5aouw@public.gmane.org> has written an alternative blank.sh -script which works on Debian systems. This scripts has now been -extended to also work on Fedora systems and included as the default -blank.sh in the distribution. -- 1.5.0.1 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 1/5] ACPI: ibm-acpi: rename some identifiers @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Rename some identifiers so that they are more in tune with the rest of the driver code, or less generic. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- drivers/acpi/ibm_acpi.c | 43 ++++++++++++++++++++++++------------------- 1 files changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index e7309a6..0a22d46 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -505,7 +505,7 @@ static int ibm_acpi_driver_init(void) return 0; } -static int driver_read(char *p) +static int ibm_acpi_driver_read(char *p) { int len = 0; @@ -1309,9 +1309,9 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define EC_HLCL 0x0c -#define EC_HLBL 0x0d -#define EC_HLMS 0x0e +#define IBMACPI_LED_EC_HLCL 0x0c +#define IBMACPI_LED_EC_HLBL 0x0d +#define IBMACPI_LED_EC_HLMS 0x0e static int led_write(char *buf) { @@ -1343,13 +1343,15 @@ static int led_write(char *buf) } else if (led_supported == IBMACPI_LED_OLD) { /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ led = 1 << led; - ret = ec_write(EC_HLMS, led); + ret = ec_write(IBMACPI_LED_EC_HLMS, led); if (ret >= 0) ret = - ec_write(EC_HLBL, led * led_exp_hlbl[ind]); + ec_write(IBMACPI_LED_EC_HLBL, + led * led_exp_hlbl[ind]); if (ret >= 0) ret = - ec_write(EC_HLCL, led * led_exp_hlcl[ind]); + ec_write(IBMACPI_LED_EC_HLCL, + led * led_exp_hlcl[ind]); if (ret < 0) return ret; } else { @@ -1656,8 +1658,8 @@ static int brightness_read(char *p) return len; } -#define BRIGHTNESS_UP 4 -#define BRIGHTNESS_DOWN 5 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 static int brightness_set(int value) { @@ -1666,7 +1668,8 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? + TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1765,9 +1768,9 @@ static int volume_read(char *p) return len; } -#define VOLUME_DOWN 0 -#define VOLUME_UP 1 -#define VOLUME_MUTE 2 +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 static int volume_write(char *buf) { @@ -1801,7 +1804,8 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN; + cmos_cmd = new_level > level ? + TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1813,14 +1817,15 @@ static int volume_write(char *buf) !acpi_ec_write(volume_offset, i + inc)) return -EIO; - if (mute && (!cmos_eval(VOLUME_MUTE) || + if (mute && (!cmos_eval(TP_CMOS_VOLUME_MUTE) || !acpi_ec_write(volume_offset, new_level + mute))) return -EIO; } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP; + cmos_cmd = new_mute ? + TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -2311,7 +2316,7 @@ static struct ibm_struct ibms[] = { { .name = "driver", .init = ibm_acpi_driver_init, - .read = driver_read, + .read = ibm_acpi_driver_read, }, { .name = "hotkey", @@ -2525,7 +2530,7 @@ static int __init ibm_device_add(struct acpi_device *device) return 0; } -static int __init register_driver(struct ibm_struct *ibm) +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) { int ret; @@ -2558,7 +2563,7 @@ static int __init ibm_init(struct ibm_struct *ibm) return 0; if (ibm->hid) { - ret = register_driver(ibm); + ret = register_ibmacpi_subdriver(ibm); if (ret < 0) return ret; ibm->driver_registered = 1; -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 1/5] ACPI: ibm-acpi: rename some identifiers @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Rename some identifiers so that they are more in tune with the rest of the driver code, or less generic. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- drivers/acpi/ibm_acpi.c | 43 ++++++++++++++++++++++++------------------- 1 files changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index e7309a6..0a22d46 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -505,7 +505,7 @@ static int ibm_acpi_driver_init(void) return 0; } -static int driver_read(char *p) +static int ibm_acpi_driver_read(char *p) { int len = 0; @@ -1309,9 +1309,9 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define EC_HLCL 0x0c -#define EC_HLBL 0x0d -#define EC_HLMS 0x0e +#define IBMACPI_LED_EC_HLCL 0x0c +#define IBMACPI_LED_EC_HLBL 0x0d +#define IBMACPI_LED_EC_HLMS 0x0e static int led_write(char *buf) { @@ -1343,13 +1343,15 @@ static int led_write(char *buf) } else if (led_supported == IBMACPI_LED_OLD) { /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ led = 1 << led; - ret = ec_write(EC_HLMS, led); + ret = ec_write(IBMACPI_LED_EC_HLMS, led); if (ret >= 0) ret = - ec_write(EC_HLBL, led * led_exp_hlbl[ind]); + ec_write(IBMACPI_LED_EC_HLBL, + led * led_exp_hlbl[ind]); if (ret >= 0) ret = - ec_write(EC_HLCL, led * led_exp_hlcl[ind]); + ec_write(IBMACPI_LED_EC_HLCL, + led * led_exp_hlcl[ind]); if (ret < 0) return ret; } else { @@ -1656,8 +1658,8 @@ static int brightness_read(char *p) return len; } -#define BRIGHTNESS_UP 4 -#define BRIGHTNESS_DOWN 5 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 static int brightness_set(int value) { @@ -1666,7 +1668,8 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? + TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1765,9 +1768,9 @@ static int volume_read(char *p) return len; } -#define VOLUME_DOWN 0 -#define VOLUME_UP 1 -#define VOLUME_MUTE 2 +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 static int volume_write(char *buf) { @@ -1801,7 +1804,8 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN; + cmos_cmd = new_level > level ? + TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1813,14 +1817,15 @@ static int volume_write(char *buf) !acpi_ec_write(volume_offset, i + inc)) return -EIO; - if (mute && (!cmos_eval(VOLUME_MUTE) || + if (mute && (!cmos_eval(TP_CMOS_VOLUME_MUTE) || !acpi_ec_write(volume_offset, new_level + mute))) return -EIO; } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP; + cmos_cmd = new_mute ? + TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -2311,7 +2316,7 @@ static struct ibm_struct ibms[] = { { .name = "driver", .init = ibm_acpi_driver_init, - .read = driver_read, + .read = ibm_acpi_driver_read, }, { .name = "hotkey", @@ -2525,7 +2530,7 @@ static int __init ibm_device_add(struct acpi_device *device) return 0; } -static int __init register_driver(struct ibm_struct *ibm) +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) { int ret; @@ -2558,7 +2563,7 @@ static int __init ibm_init(struct ibm_struct *ibm) return 0; if (ibm->hid) { - ret = register_driver(ibm); + ret = register_ibmacpi_subdriver(ibm); if (ret < 0) return ret; ibm->driver_registered = 1; -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/5] ACPI: ibm-acpi: add header file @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Add a (private) header file for ibm-acpi, and move type definitions and ThinkPad driver constants to the new header file. This patch has no functional changes. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- drivers/acpi/ibm_acpi.c | 136 +--------------- drivers/acpi/ibm_acpi.h | 436 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 437 insertions(+), 135 deletions(-) create mode 100644 drivers/acpi/ibm_acpi.h diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 0a22d46..bfa1b09 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -78,43 +78,13 @@ * 2004-08-09 0.1 initial release, support for X series */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <linux/proc_fs.h> -#include <linux/backlight.h> -#include <asm/uaccess.h> - -#include <linux/dmi.h> -#include <linux/jiffies.h> -#include <linux/workqueue.h> - -#include <acpi/acpi_drivers.h> -#include <acpi/acnamesp.h> - -#define IBM_NAME "ibm" -#define IBM_DESC "IBM ThinkPad ACPI Extras" -#define IBM_FILE "ibm_acpi" -#define IBM_URL "http://ibm-acpi.sf.net/" +#include "ibm_acpi.h" MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); MODULE_DESCRIPTION(IBM_DESC); MODULE_VERSION(IBM_VERSION); MODULE_LICENSE("GPL"); -#define IBM_DIR IBM_NAME - -#define IBM_LOG IBM_FILE ": " -#define IBM_ERR KERN_ERR IBM_LOG -#define IBM_NOTICE KERN_NOTICE IBM_LOG -#define IBM_INFO KERN_INFO IBM_LOG -#define IBM_DEBUG KERN_DEBUG IBM_LOG - -#define IBM_MAX_ACPI_ARGS 3 - #define __unused __attribute__ ((unused)) static int experimental; @@ -206,22 +176,6 @@ IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ "JFNS", /* 770x-JL */ ); /* all others */ -#define IBM_HKEY_HID "IBM0068" -#define IBM_PCI_HID "PNP0A03" - -enum thermal_access_mode { - IBMACPI_THERMAL_NONE = 0, /* No thermal support */ - IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ - IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ - IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ - IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ -}; - -#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ -struct ibm_thermal_sensors_struct { - s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; -}; - /* * FAN ACCESS MODES * @@ -322,72 +276,12 @@ struct ibm_thermal_sensors_struct { * but the ACPI tables just mention level 7. */ -enum fan_status_access_mode { - IBMACPI_FAN_NONE = 0, /* No fan status or control */ - IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ - IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ -}; - -enum fan_control_access_mode { - IBMACPI_FAN_WR_NONE = 0, /* No fan control */ - IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ - IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ - IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ -}; - -enum fan_control_commands { - IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ - IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ - IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, - * and also watchdog cmd */ -}; - -enum { /* Fan control constants */ - fan_status_offset = 0x2f, /* EC register 0x2f */ - fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) - * 0x84 must be read before 0x85 */ - - IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer - * disengaged */ - IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan - * control */ -}; - static char *ibm_thinkpad_ec_found = NULL; -struct ibm_struct { - char *name; - char param[32]; - - char *hid; - struct acpi_driver *driver; - - int (*init) (void); - int (*read) (char *); - int (*write) (char *); - void (*exit) (void); - - void (*notify) (struct ibm_struct *, u32); - acpi_handle *handle; - int type; - struct acpi_device *device; - - int driver_registered; - int proc_created; - int init_called; - int notify_installed; - - int experimental; -}; - static struct proc_dir_entry *proc_dir = NULL; static struct backlight_device *ibm_backlight_device = NULL; -#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") -#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") -#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -774,13 +668,6 @@ static int wan_write(char *buf) return 0; } -enum video_access_mode { - IBMACPI_VIDEO_NONE = 0, - IBMACPI_VIDEO_570, /* 570 */ - IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ - IBMACPI_VIDEO_NEW, /* all others */ -}; - static enum video_access_mode video_supported; static int video_orig_autosw; @@ -1247,12 +1134,6 @@ static int cmos_write(char *buf) return 0; } -enum led_access_mode { - IBMACPI_LED_NONE = 0, - IBMACPI_LED_570, /* 570 */ - IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - IBMACPI_LED_NEW, /* all others */ -}; static enum led_access_mode led_supported; static int led_init(void) @@ -1309,10 +1190,6 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define IBMACPI_LED_EC_HLCL 0x0c -#define IBMACPI_LED_EC_HLBL 0x0d -#define IBMACPI_LED_EC_HLMS 0x0e - static int led_write(char *buf) { char *cmd; @@ -1628,8 +1505,6 @@ static int ecdump_write(char *buf) return 0; } -static int brightness_offset = 0x31; - static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1658,9 +1533,6 @@ static int brightness_read(char *p) return len; } -#define TP_CMOS_BRIGHTNESS_UP 4 -#define TP_CMOS_BRIGHTNESS_DOWN 5 - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1748,8 +1620,6 @@ static void brightness_exit(void) } } -static int volume_offset = 0x30; - static int volume_read(char *p) { int len = 0; @@ -1768,10 +1638,6 @@ static int volume_read(char *p) return len; } -#define TP_CMOS_VOLUME_DOWN 0 -#define TP_CMOS_VOLUME_UP 1 -#define TP_CMOS_VOLUME_MUTE 2 - static int volume_write(char *buf) { int cmos_cmd, inc, i; diff --git a/drivers/acpi/ibm_acpi.h b/drivers/acpi/ibm_acpi.h new file mode 100644 index 0000000..4d0387a --- /dev/null +++ b/drivers/acpi/ibm_acpi.h @@ -0,0 +1,436 @@ +/* + * ibm_acpi.h - IBM ThinkPad ACPI Extras + * + * + * Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net> + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __IBM_ACPI_H__ +#define __IBM_ACPI_H__ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> + +#include <linux/proc_fs.h> +#include <linux/backlight.h> +#include <asm/uaccess.h> + +#include <linux/dmi.h> +#include <linux/jiffies.h> +#include <linux/workqueue.h> + +#include <acpi/acpi_drivers.h> +#include <acpi/acnamesp.h> + + +/**************************************************************************** + * Main driver + */ + +#define IBM_NAME "ibm" +#define IBM_DESC "IBM ThinkPad ACPI Extras" +#define IBM_FILE "ibm_acpi" +#define IBM_URL "http://ibm-acpi.sf.net/" + +#define IBM_DIR IBM_NAME + +#define IBM_LOG IBM_FILE ": " +#define IBM_ERR KERN_ERR IBM_LOG +#define IBM_NOTICE KERN_NOTICE IBM_LOG +#define IBM_INFO KERN_INFO IBM_LOG +#define IBM_DEBUG KERN_DEBUG IBM_LOG + +#define IBM_MAX_ACPI_ARGS 3 + +/* ThinkPad CMOS commands */ +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 + +struct ibm_struct { + char *name; + char param[32]; + + char *hid; + struct acpi_driver *driver; + + int (*init) (void); + int (*read) (char *); + int (*write) (char *); + void (*exit) (void); + + void (*notify) (struct ibm_struct *, u32); + acpi_handle *handle; + int type; + struct acpi_device *device; + + int driver_registered; + int proc_created; + int init_called; + int notify_installed; + + int experimental; +}; + +#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") +#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") +#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) + +/* ACPI HIDs */ +#define IBM_HKEY_HID "IBM0068" +#define IBM_PCI_HID "PNP0A03" + +/* ACPI helpers */ +static int acpi_evalf(acpi_handle handle, + void *res, char *method, char *fmt, ...); +static int acpi_ec_read(int i, u8 * p); +static int acpi_ec_write(int i, u8 v); +static int _sta(acpi_handle handle); + +/* ACPI handles */ +static acpi_handle root_handle; /* root namespace */ +static acpi_handle ec_handle; /* EC */ +static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ +static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ + +static void ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path); +#define IBM_HANDLE_INIT(object) \ + ibm_handle_init(#object, &object##_handle, *object##_parent, \ + object##_paths, ARRAY_SIZE(object##_paths), &object##_path) + +/* ACPI devices */ +static void dispatch_notify(acpi_handle handle, u32 event, void *data); +static int setup_notify(struct ibm_struct *ibm); +static int ibm_device_add(struct acpi_device *device); +static int register_ibmacpi_subdriver(struct ibm_struct *ibm); + +/* procfs support */ +static struct proc_dir_entry *proc_dir; +static int ibm_acpi_driver_init(void); +static int ibm_acpi_driver_read(char *p); + +/* procfs helpers */ +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data); +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data); +static char *next_cmd(char **cmds); + +/* Module */ +static int experimental; +static char *ibm_thinkpad_ec_found; + +static char* check_dmi_for_ec(void); +static int set_ibm_param(const char *val, struct kernel_param *kp); +static int acpi_ibm_init(void); +static void acpi_ibm_exit(void); + + +/**************************************************************************** + * Subdrivers + */ + +static struct ibm_struct ibms[]; +static int ibm_init(struct ibm_struct *ibm); +static void ibm_exit(struct ibm_struct *ibm); + + +/* + * Bay subdriver + */ + +#ifdef CONFIG_ACPI_IBM_BAY +static int bay_status_supported, bay_eject_supported; +static int bay_status2_supported, bay_eject2_supported; + +static acpi_handle bay_handle, bay_ej_handle; +static acpi_handle bay2_handle, bay2_ej_handle; + +static int bay_init(void); +static void bay_notify(struct ibm_struct *ibm, u32 event); +static int bay_read(char *p); +static int bay_write(char *buf); +#endif /* CONFIG_ACPI_IBM_BAY */ + + +/* + * Beep subdriver + */ + +static acpi_handle beep_handle; + +static int beep_read(char *p); +static int beep_write(char *buf); + + +/* + * Bluetooth subdriver + */ + +static int bluetooth_supported; + +static int bluetooth_init(void); +static int bluetooth_status(void); +static int bluetooth_read(char *p); +static int bluetooth_write(char *buf); + + +/* + * Brightness (backlight) subdriver + */ + +static struct backlight_device *ibm_backlight_device; +static int brightness_offset = 0x31; + +static int brightness_init(void); +static void brightness_exit(void); +static int brightness_get(struct backlight_device *bd); +static int brightness_set(int value); +static int brightness_update_status(struct backlight_device *bd); +static int brightness_read(char *p); +static int brightness_write(char *buf); + + +/* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd); +static int cmos_read(char *p); +static int cmos_write(char *buf); + + +/* + * Dock subdriver + */ + +static acpi_handle pci_handle; +#ifdef CONFIG_ACPI_IBM_DOCK +static acpi_handle dock_handle; + +static void dock_notify(struct ibm_struct *ibm, u32 event); +static int dock_read(char *p); +static int dock_write(char *buf); +#endif /* CONFIG_ACPI_IBM_DOCK */ + + +/* + * EC dump subdriver + */ + +static int ecdump_read(char *p) ; +static int ecdump_write(char *buf); + + +/* + * Fan subdriver + */ + +enum { /* Fan control constants */ + fan_status_offset = 0x2f, /* EC register 0x2f */ + fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) + * 0x84 must be read before 0x85 */ + + IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer + * disengaged */ + IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan + * control */ +}; + +enum fan_status_access_mode { + IBMACPI_FAN_NONE = 0, /* No fan status or control */ + IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ + IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ +}; + +enum fan_control_access_mode { + IBMACPI_FAN_WR_NONE = 0, /* No fan control */ + IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ + IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ + IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ +}; + +enum fan_control_commands { + IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ + IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ + IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, + * and also watchdog cmd */ +}; + +static enum fan_status_access_mode fan_status_access_mode; +static enum fan_control_access_mode fan_control_access_mode; +static enum fan_control_commands fan_control_commands; +static int fan_control_status_known; +static u8 fan_control_initial_status; +static int fan_watchdog_maxinterval; + +static acpi_handle fans_handle, gfan_handle, sfan_handle; + +static int fan_init(void); +static void fan_exit(void); +static int fan_get_status(u8 *status); +static int fan_get_speed(unsigned int *speed); +static void fan_watchdog_fire(struct work_struct *ignored); +static void fan_watchdog_reset(void); +static int fan_set_level(int level); +static int fan_set_enable(void); +static int fan_set_disable(void); +static int fan_set_speed(int speed); +static int fan_read(char *p); +static int fan_write(char *buf); +static int fan_write_cmd_level(const char *cmd, int *rc); +static int fan_write_cmd_enable(const char *cmd, int *rc); +static int fan_write_cmd_disable(const char *cmd, int *rc); +static int fan_write_cmd_speed(const char *cmd, int *rc); +static int fan_write_cmd_watchdog(const char *cmd, int *rc); + + +/* + * Hotkey subdriver + */ + +static int hotkey_supported; +static int hotkey_mask_supported; +static int hotkey_orig_status; +static int hotkey_orig_mask; + +static int hotkey_init(void); +static void hotkey_exit(void); +static int hotkey_get(int *status, int *mask); +static int hotkey_set(int status, int mask); +static void hotkey_notify(struct ibm_struct *ibm, u32 event); +static int hotkey_read(char *p); +static int hotkey_write(char *buf); + + +/* + * LED subdriver + */ + +enum led_access_mode { + IBMACPI_LED_NONE = 0, + IBMACPI_LED_570, /* 570 */ + IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + IBMACPI_LED_NEW, /* all others */ +}; + +enum { /* For IBMACPI_LED_OLD */ + IBMACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ + IBMACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ + IBMACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ +}; + +static enum led_access_mode led_supported; +static acpi_handle led_handle; + +static int led_init(void); +static int led_read(char *p); +static int led_write(char *buf); + +/* + * Light (thinklight) subdriver + */ + +static int light_supported; +static int light_status_supported; +static acpi_handle lght_handle, ledb_handle; + +static int light_init(void); +static int light_read(char *p); +static int light_write(char *buf); + + +/* + * Thermal subdriver + */ + +enum thermal_access_mode { + IBMACPI_THERMAL_NONE = 0, /* No thermal support */ + IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ + IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ + IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ + IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ +}; + +#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ +struct ibm_thermal_sensors_struct { + s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; +}; + +static int thermal_init(void); +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); +static int thermal_read(char *p); + + +/* + * Video subdriver + */ + +enum video_access_mode { + IBMACPI_VIDEO_NONE = 0, + IBMACPI_VIDEO_570, /* 570 */ + IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ + IBMACPI_VIDEO_NEW, /* all others */ +}; + +static enum video_access_mode video_supported; +static int video_orig_autosw; +static acpi_handle vid_handle, vid2_handle; + +static int video_init(void); +static void video_exit(void); +static int video_status(void); +static int video_autosw(void); +static int video_switch(void); +static int video_switch2(int status); +static int video_expand(void); +static int video_read(char *p); +static int video_write(char *buf); + + +/* + * Volume subdriver + */ + +static int volume_offset = 0x30; + +static int volume_read(char *p); +static int volume_write(char *buf); + + +/* + * Wan subdriver + */ + +static int wan_supported; + +static int wan_init(void); +static int wan_status(void); +static int wan_read(char *p); +static int wan_write(char *buf); + + +#endif /* __IBM_ACPI_H */ -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/5] ACPI: ibm-acpi: add header file @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Add a (private) header file for ibm-acpi, and move type definitions and ThinkPad driver constants to the new header file. This patch has no functional changes. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- drivers/acpi/ibm_acpi.c | 136 +--------------- drivers/acpi/ibm_acpi.h | 436 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 437 insertions(+), 135 deletions(-) create mode 100644 drivers/acpi/ibm_acpi.h diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 0a22d46..bfa1b09 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -78,43 +78,13 @@ * 2004-08-09 0.1 initial release, support for X series */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <linux/proc_fs.h> -#include <linux/backlight.h> -#include <asm/uaccess.h> - -#include <linux/dmi.h> -#include <linux/jiffies.h> -#include <linux/workqueue.h> - -#include <acpi/acpi_drivers.h> -#include <acpi/acnamesp.h> - -#define IBM_NAME "ibm" -#define IBM_DESC "IBM ThinkPad ACPI Extras" -#define IBM_FILE "ibm_acpi" -#define IBM_URL "http://ibm-acpi.sf.net/" +#include "ibm_acpi.h" MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); MODULE_DESCRIPTION(IBM_DESC); MODULE_VERSION(IBM_VERSION); MODULE_LICENSE("GPL"); -#define IBM_DIR IBM_NAME - -#define IBM_LOG IBM_FILE ": " -#define IBM_ERR KERN_ERR IBM_LOG -#define IBM_NOTICE KERN_NOTICE IBM_LOG -#define IBM_INFO KERN_INFO IBM_LOG -#define IBM_DEBUG KERN_DEBUG IBM_LOG - -#define IBM_MAX_ACPI_ARGS 3 - #define __unused __attribute__ ((unused)) static int experimental; @@ -206,22 +176,6 @@ IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ "JFNS", /* 770x-JL */ ); /* all others */ -#define IBM_HKEY_HID "IBM0068" -#define IBM_PCI_HID "PNP0A03" - -enum thermal_access_mode { - IBMACPI_THERMAL_NONE = 0, /* No thermal support */ - IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ - IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ - IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ - IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ -}; - -#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ -struct ibm_thermal_sensors_struct { - s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; -}; - /* * FAN ACCESS MODES * @@ -322,72 +276,12 @@ struct ibm_thermal_sensors_struct { * but the ACPI tables just mention level 7. */ -enum fan_status_access_mode { - IBMACPI_FAN_NONE = 0, /* No fan status or control */ - IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ - IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ -}; - -enum fan_control_access_mode { - IBMACPI_FAN_WR_NONE = 0, /* No fan control */ - IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ - IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ - IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ -}; - -enum fan_control_commands { - IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ - IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ - IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, - * and also watchdog cmd */ -}; - -enum { /* Fan control constants */ - fan_status_offset = 0x2f, /* EC register 0x2f */ - fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) - * 0x84 must be read before 0x85 */ - - IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer - * disengaged */ - IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan - * control */ -}; - static char *ibm_thinkpad_ec_found = NULL; -struct ibm_struct { - char *name; - char param[32]; - - char *hid; - struct acpi_driver *driver; - - int (*init) (void); - int (*read) (char *); - int (*write) (char *); - void (*exit) (void); - - void (*notify) (struct ibm_struct *, u32); - acpi_handle *handle; - int type; - struct acpi_device *device; - - int driver_registered; - int proc_created; - int init_called; - int notify_installed; - - int experimental; -}; - static struct proc_dir_entry *proc_dir = NULL; static struct backlight_device *ibm_backlight_device = NULL; -#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") -#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") -#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -774,13 +668,6 @@ static int wan_write(char *buf) return 0; } -enum video_access_mode { - IBMACPI_VIDEO_NONE = 0, - IBMACPI_VIDEO_570, /* 570 */ - IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ - IBMACPI_VIDEO_NEW, /* all others */ -}; - static enum video_access_mode video_supported; static int video_orig_autosw; @@ -1247,12 +1134,6 @@ static int cmos_write(char *buf) return 0; } -enum led_access_mode { - IBMACPI_LED_NONE = 0, - IBMACPI_LED_570, /* 570 */ - IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - IBMACPI_LED_NEW, /* all others */ -}; static enum led_access_mode led_supported; static int led_init(void) @@ -1309,10 +1190,6 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define IBMACPI_LED_EC_HLCL 0x0c -#define IBMACPI_LED_EC_HLBL 0x0d -#define IBMACPI_LED_EC_HLMS 0x0e - static int led_write(char *buf) { char *cmd; @@ -1628,8 +1505,6 @@ static int ecdump_write(char *buf) return 0; } -static int brightness_offset = 0x31; - static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1658,9 +1533,6 @@ static int brightness_read(char *p) return len; } -#define TP_CMOS_BRIGHTNESS_UP 4 -#define TP_CMOS_BRIGHTNESS_DOWN 5 - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1748,8 +1620,6 @@ static void brightness_exit(void) } } -static int volume_offset = 0x30; - static int volume_read(char *p) { int len = 0; @@ -1768,10 +1638,6 @@ static int volume_read(char *p) return len; } -#define TP_CMOS_VOLUME_DOWN 0 -#define TP_CMOS_VOLUME_UP 1 -#define TP_CMOS_VOLUME_MUTE 2 - static int volume_write(char *buf) { int cmos_cmd, inc, i; diff --git a/drivers/acpi/ibm_acpi.h b/drivers/acpi/ibm_acpi.h new file mode 100644 index 0000000..4d0387a --- /dev/null +++ b/drivers/acpi/ibm_acpi.h @@ -0,0 +1,436 @@ +/* + * ibm_acpi.h - IBM ThinkPad ACPI Extras + * + * + * Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net> + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __IBM_ACPI_H__ +#define __IBM_ACPI_H__ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> + +#include <linux/proc_fs.h> +#include <linux/backlight.h> +#include <asm/uaccess.h> + +#include <linux/dmi.h> +#include <linux/jiffies.h> +#include <linux/workqueue.h> + +#include <acpi/acpi_drivers.h> +#include <acpi/acnamesp.h> + + +/**************************************************************************** + * Main driver + */ + +#define IBM_NAME "ibm" +#define IBM_DESC "IBM ThinkPad ACPI Extras" +#define IBM_FILE "ibm_acpi" +#define IBM_URL "http://ibm-acpi.sf.net/" + +#define IBM_DIR IBM_NAME + +#define IBM_LOG IBM_FILE ": " +#define IBM_ERR KERN_ERR IBM_LOG +#define IBM_NOTICE KERN_NOTICE IBM_LOG +#define IBM_INFO KERN_INFO IBM_LOG +#define IBM_DEBUG KERN_DEBUG IBM_LOG + +#define IBM_MAX_ACPI_ARGS 3 + +/* ThinkPad CMOS commands */ +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 + +struct ibm_struct { + char *name; + char param[32]; + + char *hid; + struct acpi_driver *driver; + + int (*init) (void); + int (*read) (char *); + int (*write) (char *); + void (*exit) (void); + + void (*notify) (struct ibm_struct *, u32); + acpi_handle *handle; + int type; + struct acpi_device *device; + + int driver_registered; + int proc_created; + int init_called; + int notify_installed; + + int experimental; +}; + +#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") +#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") +#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) + +/* ACPI HIDs */ +#define IBM_HKEY_HID "IBM0068" +#define IBM_PCI_HID "PNP0A03" + +/* ACPI helpers */ +static int acpi_evalf(acpi_handle handle, + void *res, char *method, char *fmt, ...); +static int acpi_ec_read(int i, u8 * p); +static int acpi_ec_write(int i, u8 v); +static int _sta(acpi_handle handle); + +/* ACPI handles */ +static acpi_handle root_handle; /* root namespace */ +static acpi_handle ec_handle; /* EC */ +static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ +static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ + +static void ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path); +#define IBM_HANDLE_INIT(object) \ + ibm_handle_init(#object, &object##_handle, *object##_parent, \ + object##_paths, ARRAY_SIZE(object##_paths), &object##_path) + +/* ACPI devices */ +static void dispatch_notify(acpi_handle handle, u32 event, void *data); +static int setup_notify(struct ibm_struct *ibm); +static int ibm_device_add(struct acpi_device *device); +static int register_ibmacpi_subdriver(struct ibm_struct *ibm); + +/* procfs support */ +static struct proc_dir_entry *proc_dir; +static int ibm_acpi_driver_init(void); +static int ibm_acpi_driver_read(char *p); + +/* procfs helpers */ +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data); +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data); +static char *next_cmd(char **cmds); + +/* Module */ +static int experimental; +static char *ibm_thinkpad_ec_found; + +static char* check_dmi_for_ec(void); +static int set_ibm_param(const char *val, struct kernel_param *kp); +static int acpi_ibm_init(void); +static void acpi_ibm_exit(void); + + +/**************************************************************************** + * Subdrivers + */ + +static struct ibm_struct ibms[]; +static int ibm_init(struct ibm_struct *ibm); +static void ibm_exit(struct ibm_struct *ibm); + + +/* + * Bay subdriver + */ + +#ifdef CONFIG_ACPI_IBM_BAY +static int bay_status_supported, bay_eject_supported; +static int bay_status2_supported, bay_eject2_supported; + +static acpi_handle bay_handle, bay_ej_handle; +static acpi_handle bay2_handle, bay2_ej_handle; + +static int bay_init(void); +static void bay_notify(struct ibm_struct *ibm, u32 event); +static int bay_read(char *p); +static int bay_write(char *buf); +#endif /* CONFIG_ACPI_IBM_BAY */ + + +/* + * Beep subdriver + */ + +static acpi_handle beep_handle; + +static int beep_read(char *p); +static int beep_write(char *buf); + + +/* + * Bluetooth subdriver + */ + +static int bluetooth_supported; + +static int bluetooth_init(void); +static int bluetooth_status(void); +static int bluetooth_read(char *p); +static int bluetooth_write(char *buf); + + +/* + * Brightness (backlight) subdriver + */ + +static struct backlight_device *ibm_backlight_device; +static int brightness_offset = 0x31; + +static int brightness_init(void); +static void brightness_exit(void); +static int brightness_get(struct backlight_device *bd); +static int brightness_set(int value); +static int brightness_update_status(struct backlight_device *bd); +static int brightness_read(char *p); +static int brightness_write(char *buf); + + +/* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd); +static int cmos_read(char *p); +static int cmos_write(char *buf); + + +/* + * Dock subdriver + */ + +static acpi_handle pci_handle; +#ifdef CONFIG_ACPI_IBM_DOCK +static acpi_handle dock_handle; + +static void dock_notify(struct ibm_struct *ibm, u32 event); +static int dock_read(char *p); +static int dock_write(char *buf); +#endif /* CONFIG_ACPI_IBM_DOCK */ + + +/* + * EC dump subdriver + */ + +static int ecdump_read(char *p) ; +static int ecdump_write(char *buf); + + +/* + * Fan subdriver + */ + +enum { /* Fan control constants */ + fan_status_offset = 0x2f, /* EC register 0x2f */ + fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) + * 0x84 must be read before 0x85 */ + + IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer + * disengaged */ + IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan + * control */ +}; + +enum fan_status_access_mode { + IBMACPI_FAN_NONE = 0, /* No fan status or control */ + IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ + IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ +}; + +enum fan_control_access_mode { + IBMACPI_FAN_WR_NONE = 0, /* No fan control */ + IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ + IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ + IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ +}; + +enum fan_control_commands { + IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ + IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ + IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, + * and also watchdog cmd */ +}; + +static enum fan_status_access_mode fan_status_access_mode; +static enum fan_control_access_mode fan_control_access_mode; +static enum fan_control_commands fan_control_commands; +static int fan_control_status_known; +static u8 fan_control_initial_status; +static int fan_watchdog_maxinterval; + +static acpi_handle fans_handle, gfan_handle, sfan_handle; + +static int fan_init(void); +static void fan_exit(void); +static int fan_get_status(u8 *status); +static int fan_get_speed(unsigned int *speed); +static void fan_watchdog_fire(struct work_struct *ignored); +static void fan_watchdog_reset(void); +static int fan_set_level(int level); +static int fan_set_enable(void); +static int fan_set_disable(void); +static int fan_set_speed(int speed); +static int fan_read(char *p); +static int fan_write(char *buf); +static int fan_write_cmd_level(const char *cmd, int *rc); +static int fan_write_cmd_enable(const char *cmd, int *rc); +static int fan_write_cmd_disable(const char *cmd, int *rc); +static int fan_write_cmd_speed(const char *cmd, int *rc); +static int fan_write_cmd_watchdog(const char *cmd, int *rc); + + +/* + * Hotkey subdriver + */ + +static int hotkey_supported; +static int hotkey_mask_supported; +static int hotkey_orig_status; +static int hotkey_orig_mask; + +static int hotkey_init(void); +static void hotkey_exit(void); +static int hotkey_get(int *status, int *mask); +static int hotkey_set(int status, int mask); +static void hotkey_notify(struct ibm_struct *ibm, u32 event); +static int hotkey_read(char *p); +static int hotkey_write(char *buf); + + +/* + * LED subdriver + */ + +enum led_access_mode { + IBMACPI_LED_NONE = 0, + IBMACPI_LED_570, /* 570 */ + IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + IBMACPI_LED_NEW, /* all others */ +}; + +enum { /* For IBMACPI_LED_OLD */ + IBMACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ + IBMACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ + IBMACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ +}; + +static enum led_access_mode led_supported; +static acpi_handle led_handle; + +static int led_init(void); +static int led_read(char *p); +static int led_write(char *buf); + +/* + * Light (thinklight) subdriver + */ + +static int light_supported; +static int light_status_supported; +static acpi_handle lght_handle, ledb_handle; + +static int light_init(void); +static int light_read(char *p); +static int light_write(char *buf); + + +/* + * Thermal subdriver + */ + +enum thermal_access_mode { + IBMACPI_THERMAL_NONE = 0, /* No thermal support */ + IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ + IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ + IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ + IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ +}; + +#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ +struct ibm_thermal_sensors_struct { + s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; +}; + +static int thermal_init(void); +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); +static int thermal_read(char *p); + + +/* + * Video subdriver + */ + +enum video_access_mode { + IBMACPI_VIDEO_NONE = 0, + IBMACPI_VIDEO_570, /* 570 */ + IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ + IBMACPI_VIDEO_NEW, /* all others */ +}; + +static enum video_access_mode video_supported; +static int video_orig_autosw; +static acpi_handle vid_handle, vid2_handle; + +static int video_init(void); +static void video_exit(void); +static int video_status(void); +static int video_autosw(void); +static int video_switch(void); +static int video_switch2(int status); +static int video_expand(void); +static int video_read(char *p); +static int video_write(char *buf); + + +/* + * Volume subdriver + */ + +static int volume_offset = 0x30; + +static int volume_read(char *p); +static int volume_write(char *buf); + + +/* + * Wan subdriver + */ + +static int wan_supported; + +static int wan_init(void); +static int wan_status(void); +static int wan_read(char *p); +static int wan_write(char *buf); + + +#endif /* __IBM_ACPI_H */ -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/5] ACPI: ibm-acpi: organize code @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Shuffle code around to better organize the driver code inside the ibm-acpi.c file. This patch adds no functional changes. It is pure fluff that will make me a bit more productive. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- drivers/acpi/ibm_acpi.c | 1382 +++++++++++++++++++++++++---------------------- 1 files changed, 749 insertions(+), 633 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index bfa1b09..3158fc3 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -87,8 +87,17 @@ MODULE_LICENSE("GPL"); #define __unused __attribute__ ((unused)) -static int experimental; -module_param(experimental, int, 0); +/**************************************************************************** + **************************************************************************** + * + * ACPI Helpers and device model + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ACPI basic handles + */ static acpi_handle root_handle = NULL; @@ -105,183 +114,31 @@ IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */ "\\_SB.PCI0.ICH3.EC0", /* R31 */ "\\_SB.PCI0.LPC.EC", /* all others */ - ); + ); -IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ - "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ - "\\_SB.PCI0.VID0", /* 770e */ - "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ - "\\_SB.PCI0.AGP.VID", /* all others */ - ); /* R30, R31 */ +IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ +IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + +/************************************************************************* + * Misc ACPI handles + */ IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ "\\CMS", /* R40, R40e */ - ); /* all others */ -#ifdef CONFIG_ACPI_IBM_DOCK -IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ - "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ - "\\_SB.PCI0.PCI1.DOCK", /* all others */ - "\\_SB.PCI.ISA.SLCE", /* 570 */ - ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ -#endif -#ifdef CONFIG_ACPI_IBM_BAY -IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ - "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ - "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ - "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ - ); /* A21e, R30, R31 */ - -IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ - "_EJ0", /* all others */ - ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ - -IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ - "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ - "_EJ0", /* 770x */ - ); /* all others */ -#endif /* CONFIG_ACPI_IBM_BAY */ - -/* don't list other alternatives as we install a notify handler on the 570 */ -IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ + ); /* all others */ IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ "^HKEY", /* R30, R31 */ "HKEY", /* all others */ - ); /* 570 */ - -IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ -IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ - -IBM_HANDLE(led, ec, "SLED", /* 570 */ - "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - "LED", /* all others */ - ); /* R30, R31 */ - -IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ -IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ -IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ + ); /* 570 */ -IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ - "\\FSPD", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ - "JFNS", /* 770x-JL */ - ); /* all others */ -/* - * FAN ACCESS MODES - * - * IBMACPI_FAN_RD_ACPI_GFAN: - * ACPI GFAN method: returns fan level - * - * see IBMACPI_FAN_WR_ACPI_SFAN - * EC 0x2f not available if GFAN exists - * - * IBMACPI_FAN_WR_ACPI_SFAN: - * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) - * - * EC 0x2f might be available *for reading*, but never for writing. - * - * IBMACPI_FAN_WR_TPEC: - * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported - * on almost all ThinkPads - * - * Fan speed changes of any sort (including those caused by the - * disengaged mode) are usually done slowly by the firmware as the - * maximum ammount of fan duty cycle change per second seems to be - * limited. - * - * Reading is not available if GFAN exists. - * Writing is not available if SFAN exists. - * - * Bits - * 7 automatic mode engaged; - * (default operation mode of the ThinkPad) - * fan level is ignored in this mode. - * 6 disengage mode (takes precedence over bit 7); - * not available on all thinkpads. May disable - * the tachometer, and speeds up fan to 100% duty-cycle, - * which speeds it up far above the standard RPM - * levels. It is not impossible that it could cause - * hardware damage. - * 5-3 unused in some models. Extra bits for fan level - * in others, but still useless as all values above - * 7 map to the same speed as level 7 in these models. - * 2-0 fan level (0..7 usually) - * 0x00 = stop - * 0x07 = max (set when temperatures critical) - * Some ThinkPads may have other levels, see - * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) - * - * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at - * boot. Apparently the EC does not intialize it, so unless ACPI DSDT - * does so, its initial value is meaningless (0x07). - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * ---- - * - * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): - * Main fan tachometer reading (in RPM) - * - * This register is present on all ThinkPads with a new-style EC, and - * it is known not to be present on the A21m/e, and T22, as there is - * something else in offset 0x84 according to the ACPI DSDT. Other - * ThinkPads from this same time period (and earlier) probably lack the - * tachometer as well. - * - * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare - * was never fixed by IBM to report the EC firmware version string - * probably support the tachometer (like the early X models), so - * detecting it is quite hard. We need more data to know for sure. - * - * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings - * might result. - * - * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this - * register is not invalidated in ThinkPads that disable tachometer - * readings. Thus, the tachometer readings go stale. - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * IBMACPI_FAN_WR_ACPI_FANS: - * ThinkPad X31, X40, X41. Not available in the X60. - * - * FANS ACPI handle: takes three arguments: low speed, medium speed, - * high speed. ACPI DSDT seems to map these three speeds to levels - * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH - * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") - * - * The speeds are stored on handles - * (FANA:FAN9), (FANC:FANB), (FANE:FAND). - * - * There are three default speed sets, acessible as handles: - * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H - * - * ACPI DSDT switches which set is in use depending on various - * factors. - * - * IBMACPI_FAN_WR_TPEC is also available and should be used to - * command the fan. The X31/X40/X41 seems to have 8 fan levels, - * but the ACPI tables just mention level 7. +/************************************************************************* + * ACPI helpers */ -static char *ibm_thinkpad_ec_found = NULL; - -static struct proc_dir_entry *proc_dir = NULL; - -static struct backlight_device *ibm_backlight_device = NULL; - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -371,6 +228,198 @@ static void __unused acpi_print_int(acpi_handle handle, char *method) printk(IBM_ERR "error calling %s\n", method); } +static int acpi_ec_read(int i, u8 * p) +{ + int v; + + if (ecrd_handle) { + if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) + return 0; + *p = v; + } else { + if (ec_read(i, p) < 0) + return 0; + } + + return 1; +} + +static int acpi_ec_write(int i, u8 v) +{ + if (ecwr_handle) { + if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) + return 0; + } else { + if (ec_write(i, v) < 0) + return 0; + } + + return 1; +} + +static int _sta(acpi_handle handle) +{ + int status; + + if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) + status = 0; + + return status; +} + +/************************************************************************* + * ACPI device model + */ + +static void __init ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path) +{ + int i; + acpi_status status; + + for (i = 0; i < num_paths; i++) { + status = acpi_get_handle(parent, paths[i], handle); + if (ACPI_SUCCESS(status)) { + *path = paths[i]; + return; + } + } + + *handle = NULL; +} + +static void dispatch_notify(acpi_handle handle, u32 event, void *data) +{ + struct ibm_struct *ibm = data; + + if (!ibm || !ibm->notify) + return; + + ibm->notify(ibm, event); +} + +static int __init setup_notify(struct ibm_struct *ibm) +{ + acpi_status status; + int ret; + + if (!*ibm->handle) + return 0; + + ret = acpi_bus_get_device(*ibm->handle, &ibm->device); + if (ret < 0) { + printk(IBM_ERR "%s device not present\n", ibm->name); + return 0; + } + + acpi_driver_data(ibm->device) = ibm; + sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); + + status = acpi_install_notify_handler(*ibm->handle, ibm->type, + dispatch_notify, ibm); + if (ACPI_FAILURE(status)) { + printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", + ibm->name, status); + return -ENODEV; + } + ibm->notify_installed = 1; + return 0; +} + +static int __init ibm_device_add(struct acpi_device *device) +{ + return 0; +} + +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) +{ + int ret; + + ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); + if (!ibm->driver) { + printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); + return -1; + } + + sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); + ibm->driver->ids = ibm->hid; + ibm->driver->ops.add = &ibm_device_add; + + ret = acpi_bus_register_driver(ibm->driver); + if (ret < 0) { + printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", + ibm->hid, ret); + kfree(ibm->driver); + } + + return ret; +} + + +/**************************************************************************** + **************************************************************************** + * + * Procfs Helpers + * + **************************************************************************** + ****************************************************************************/ + +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + struct ibm_struct *ibm = data; + int len; + + if (!ibm || !ibm->read) + return -EINVAL; + + len = ibm->read(page); + if (len < 0) + return len; + + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data) +{ + struct ibm_struct *ibm = data; + char *kernbuf; + int ret; + + if (!ibm || !ibm->write) + return -EINVAL; + + kernbuf = kmalloc(count + 2, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; + + if (copy_from_user(kernbuf, userbuf, count)) { + kfree(kernbuf); + return -EFAULT; + } + + kernbuf[count] = 0; + strcat(kernbuf, ","); + ret = ibm->write(kernbuf); + if (ret == 0) + ret = count; + + kfree(kernbuf); + + return ret; +} + static char *next_cmd(char **cmds) { char *start = *cmds; @@ -387,6 +436,19 @@ static char *next_cmd(char **cmds) return start; } + +/**************************************************************************** + **************************************************************************** + * + * Subdrivers + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ibm-acpi init subdriver + */ + static int ibm_acpi_driver_init(void) { printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); @@ -409,11 +471,51 @@ static int ibm_acpi_driver_read(char *p) return len; } +/************************************************************************* + * Hotkey subdriver + */ + static int hotkey_supported; static int hotkey_mask_supported; static int hotkey_orig_status; static int hotkey_orig_mask; +static int hotkey_init(void) +{ + /* hotkey not supported on 570 */ + hotkey_supported = hkey_handle != NULL; + + if (hotkey_supported) { + /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + A30, R30, R31, T20-22, X20-21, X22-24 */ + hotkey_mask_supported = + acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); + + if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) + return -ENODEV; + } + + return 0; +} + +static void hotkey_exit(void) +{ + if (hotkey_supported) + hotkey_set(hotkey_orig_status, hotkey_orig_mask); +} + +static void hotkey_notify(struct ibm_struct *ibm, u32 event) +{ + int hkey; + + if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) + acpi_bus_generate_event(ibm->device, event, hkey); + else { + printk(IBM_ERR "unknown hotkey event %d\n", event); + acpi_bus_generate_event(ibm->device, event, 0); + } +} + static int hotkey_get(int *status, int *mask) { if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) @@ -444,24 +546,6 @@ static int hotkey_set(int status, int mask) return 1; } -static int hotkey_init(void) -{ - /* hotkey not supported on 570 */ - hotkey_supported = hkey_handle != NULL; - - if (hotkey_supported) { - /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - A30, R30, R31, T20-22, X20-21, X22-24 */ - hotkey_mask_supported = - acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); - - if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) - return -ENODEV; - } - - return 0; -} - static int hotkey_read(char *p) { int status, mask; @@ -523,23 +607,9 @@ static int hotkey_write(char *buf) return 0; } -static void hotkey_exit(void) -{ - if (hotkey_supported) - hotkey_set(hotkey_orig_status, hotkey_orig_mask); -} - -static void hotkey_notify(struct ibm_struct *ibm, u32 event) -{ - int hkey; - - if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) - acpi_bus_generate_event(ibm->device, event, hkey); - else { - printk(IBM_ERR "unknown hotkey event %d\n", event); - acpi_bus_generate_event(ibm->device, event, 0); - } -} +/************************************************************************* + * Bluetooth subdriver + */ static int bluetooth_supported; @@ -606,6 +676,10 @@ static int bluetooth_write(char *buf) return 0; } +/************************************************************************* + * Wan subdriver + */ + static int wan_supported; static int wan_init(void) @@ -668,9 +742,22 @@ static int wan_write(char *buf) return 0; } +/************************************************************************* + * Video subdriver + */ + static enum video_access_mode video_supported; static int video_orig_autosw; +IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ + "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ + "\\_SB.PCI0.VID0", /* 770e */ + "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ + "\\_SB.PCI0.AGP.VID", /* all others */ + ); /* R30, R31 */ + +IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + static int video_init(void) { int ivga; @@ -695,6 +782,11 @@ static int video_init(void) return 0; } +static void video_exit(void) +{ + acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); +} + static int video_status(void) { int status = 0; @@ -736,33 +828,6 @@ static int video_autosw(void) return autosw & 1; } -static int video_read(char *p) -{ - int status = video_status(); - int autosw = video_autosw(); - int len = 0; - - if (!video_supported) { - len += sprintf(p + len, "status:\t\tnot supported\n"); - return len; - } - - len += sprintf(p + len, "status:\t\tsupported\n"); - len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); - len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); - len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); - len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); - len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); - len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); - len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); - - return len; -} - static int video_switch(void) { int autosw = video_autosw(); @@ -812,6 +877,33 @@ static int video_switch2(int status) return ret; } +static int video_read(char *p) +{ + int status = video_status(); + int autosw = video_autosw(); + int len = 0; + + if (!video_supported) { + len += sprintf(p + len, "status:\t\tnot supported\n"); + return len; + } + + len += sprintf(p + len, "status:\t\tsupported\n"); + len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); + len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); + len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); + len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); + len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); + len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); + len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); + + return len; +} + static int video_write(char *buf) { char *cmd; @@ -862,14 +954,16 @@ static int video_write(char *buf) return 0; } -static void video_exit(void) -{ - acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); -} +/************************************************************************* + * Light (thinklight) subdriver + */ static int light_supported; static int light_status_supported; +IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ +IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ + static int light_init(void) { /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */ @@ -933,21 +1027,45 @@ static int light_write(char *buf) return 0; } -#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY) -static int _sta(acpi_handle handle) -{ - int status; - - if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) - status = 0; +/************************************************************************* + * Dock subdriver + */ - return status; -} -#endif +/* don't list other alternatives as we install a notify handler on the 570 */ +IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ #ifdef CONFIG_ACPI_IBM_DOCK + +IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ + "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ + "\\_SB.PCI0.PCI1.DOCK", /* all others */ + "\\_SB.PCI.ISA.SLCE", /* 570 */ + ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ + #define dock_docked() (_sta(dock_handle) & 1) +static void dock_notify(struct ibm_struct *ibm, u32 event) +{ + int docked = dock_docked(); + int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); + + if (event == 1 && !pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 1 && pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else if (event == 3 && docked) + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 3 && !docked) + acpi_bus_generate_event(ibm->device, event, 2); /* undock */ + else if (event == 0 && docked) + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else { + printk(IBM_ERR "unknown dock event %d, status %d\n", + event, _sta(dock_handle)); + acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ + } +} + static int dock_read(char *p) { int len = 0; @@ -987,28 +1105,11 @@ static int dock_write(char *buf) return 0; } -static void dock_notify(struct ibm_struct *ibm, u32 event) -{ - int docked = dock_docked(); - int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); +#endif /* CONFIG_ACPI_IBM_DOCK */ - if (event == 1 && !pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 1 && pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else if (event == 3 && docked) - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 3 && !docked) - acpi_bus_generate_event(ibm->device, event, 2); /* undock */ - else if (event == 0 && docked) - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else { - printk(IBM_ERR "unknown dock event %d, status %d\n", - event, _sta(dock_handle)); - acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ - } -} -#endif +/************************************************************************* + * Bay subdriver + */ #ifdef CONFIG_ACPI_IBM_BAY static int bay_status_supported; @@ -1016,6 +1117,21 @@ static int bay_status2_supported; static int bay_eject_supported; static int bay_eject2_supported; +IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ + "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ + "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ + "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ + ); /* A21e, R30, R31 */ +IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ + "_EJ0", /* all others */ + ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ +IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ + "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ + "_EJ0", /* 770x */ + ); /* all others */ + static int bay_init(void) { bay_status_supported = bay_handle && @@ -1031,6 +1147,11 @@ static int bay_init(void) return 0; } +static void bay_notify(struct ibm_struct *ibm, u32 event) +{ + acpi_bus_generate_event(ibm->device, event, 0); +} + #define bay_occupied(b) (_sta(b##_handle) & 1) static int bay_read(char *p) @@ -1081,12 +1202,19 @@ static int bay_write(char *buf) return 0; } +#endif /* CONFIG_ACPI_IBM_BAY */ -static void bay_notify(struct ibm_struct *ibm, u32 event) +/************************************************************************* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd) { - acpi_bus_generate_event(ibm->device, event, 0); + if (cmos_handle) + return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); + else + return 1; } -#endif /* CONFIG_ACPI_IBM_BAY */ static int cmos_read(char *p) { @@ -1104,14 +1232,6 @@ static int cmos_read(char *p) return len; } -static int cmos_eval(int cmos_cmd) -{ - if (cmos_handle) - return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); - else - return 1; -} - static int cmos_write(char *buf) { char *cmd; @@ -1134,8 +1254,18 @@ static int cmos_write(char *buf) return 0; } + +/************************************************************************* + * LED subdriver + */ + static enum led_access_mode led_supported; +IBM_HANDLE(led, ec, "SLED", /* 570 */ + "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + "LED", /* all others */ + ); /* R30, R31 */ + static int led_init(void) { if (!led_handle) @@ -1242,6 +1372,12 @@ static int led_write(char *buf) return 0; } +/************************************************************************* + * Beep subdriver + */ + +IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ + static int beep_read(char *p) { int len = 0; @@ -1277,34 +1413,9 @@ static int beep_write(char *buf) return 0; } -static int acpi_ec_read(int i, u8 * p) -{ - int v; - - if (ecrd_handle) { - if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) - return 0; - *p = v; - } else { - if (ec_read(i, p) < 0) - return 0; - } - - return 1; -} - -static int acpi_ec_write(int i, u8 v) -{ - if (ecwr_handle) { - if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) - return 0; - } else { - if (ec_write(i, v) < 0) - return 0; - } - - return 1; -} +/************************************************************************* + * Thermal subdriver + */ static enum thermal_access_mode thermal_read_mode; @@ -1446,6 +1557,10 @@ static int thermal_read(char *p) return len; } +/************************************************************************* + * EC Dump subdriver + */ + static u8 ecdump_regs[256]; static int ecdump_read(char *p) @@ -1505,6 +1620,52 @@ static int ecdump_write(char *buf) return 0; } +/************************************************************************* + * Backlight/brightness subdriver + */ + +static struct backlight_device *ibm_backlight_device = NULL; + +static struct backlight_ops ibm_backlight_data = { + .get_brightness = brightness_get, + .update_status = brightness_update_status, +}; + +static int brightness_init(void) +{ + int b; + + b = brightness_get(NULL); + if (b < 0) + return b; + + ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, + &ibm_backlight_data); + if (IS_ERR(ibm_backlight_device)) { + printk(IBM_ERR "Could not register backlight device\n"); + return PTR_ERR(ibm_backlight_device); + } + + ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.brightness = b; + backlight_update_status(ibm_backlight_device); + + return 0; +} + +static void brightness_exit(void) +{ + if (ibm_backlight_device) { + backlight_device_unregister(ibm_backlight_device); + ibm_backlight_device = NULL; + } +} + +static int brightness_update_status(struct backlight_device *bd) +{ + return brightness_set(bd->props.brightness); +} + static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1516,23 +1677,6 @@ static int brightness_get(struct backlight_device *bd) return level; } -static int brightness_read(char *p) -{ - int len = 0; - int level; - - if ((level = brightness_get(NULL)) < 0) { - len += sprintf(p + len, "level:\t\tunreadable\n"); - } else { - len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); - len += sprintf(p + len, "commands:\tup, down\n"); - len += sprintf(p + len, "commands:\tlevel <level>" - " (<level> is 0-7)\n"); - } - - return len; -} - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1540,8 +1684,7 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? - TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1553,6 +1696,23 @@ static int brightness_set(int value) return 0; } +static int brightness_read(char *p) +{ + int len = 0; + int level; + + if ((level = brightness_get(NULL)) < 0) { + len += sprintf(p + len, "level:\t\tunreadable\n"); + } else { + len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); + len += sprintf(p + len, "commands:\tup, down\n"); + len += sprintf(p + len, "commands:\tlevel <level>" + " (<level> is 0-7)\n"); + } + + return len; +} + static int brightness_write(char *buf) { int level; @@ -1580,45 +1740,9 @@ static int brightness_write(char *buf) return 0; } -static int brightness_update_status(struct backlight_device *bd) -{ - return brightness_set(bd->props.brightness); -} - -static struct backlight_ops ibm_backlight_data = { - .get_brightness = brightness_get, - .update_status = brightness_update_status, -}; - -static int brightness_init(void) -{ - int b; - - b = brightness_get(NULL); - if (b < 0) - return b; - - ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, - &ibm_backlight_data); - if (IS_ERR(ibm_backlight_device)) { - printk(IBM_ERR "Could not register backlight device\n"); - return PTR_ERR(ibm_backlight_device); - } - - ibm_backlight_device->props.max_brightness = 7; - ibm_backlight_device->props.brightness = b; - backlight_update_status(ibm_backlight_device); - - return 0; -} - -static void brightness_exit(void) -{ - if (ibm_backlight_device) { - backlight_device_unregister(ibm_backlight_device); - ibm_backlight_device = NULL; - } -} +/************************************************************************* + * Volume subdriver + */ static int volume_read(char *p) { @@ -1670,8 +1794,7 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? - TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; + cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1690,8 +1813,7 @@ static int volume_write(char *buf) } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? - TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; + cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -1702,6 +1824,111 @@ static int volume_write(char *buf) return 0; } + +/************************************************************************* + * Fan subdriver + */ + +/* + * FAN ACCESS MODES + * + * IBMACPI_FAN_RD_ACPI_GFAN: + * ACPI GFAN method: returns fan level + * + * see IBMACPI_FAN_WR_ACPI_SFAN + * EC 0x2f not available if GFAN exists + * + * IBMACPI_FAN_WR_ACPI_SFAN: + * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) + * + * EC 0x2f might be available *for reading*, but never for writing. + * + * IBMACPI_FAN_WR_TPEC: + * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported + * on almost all ThinkPads + * + * Fan speed changes of any sort (including those caused by the + * disengaged mode) are usually done slowly by the firmware as the + * maximum ammount of fan duty cycle change per second seems to be + * limited. + * + * Reading is not available if GFAN exists. + * Writing is not available if SFAN exists. + * + * Bits + * 7 automatic mode engaged; + * (default operation mode of the ThinkPad) + * fan level is ignored in this mode. + * 6 disengage mode (takes precedence over bit 7); + * not available on all thinkpads. May disable + * the tachometer, and speeds up fan to 100% duty-cycle, + * which speeds it up far above the standard RPM + * levels. It is not impossible that it could cause + * hardware damage. + * 5-3 unused in some models. Extra bits for fan level + * in others, but still useless as all values above + * 7 map to the same speed as level 7 in these models. + * 2-0 fan level (0..7 usually) + * 0x00 = stop + * 0x07 = max (set when temperatures critical) + * Some ThinkPads may have other levels, see + * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) + * + * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at + * boot. Apparently the EC does not intialize it, so unless ACPI DSDT + * does so, its initial value is meaningless (0x07). + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * ---- + * + * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): + * Main fan tachometer reading (in RPM) + * + * This register is present on all ThinkPads with a new-style EC, and + * it is known not to be present on the A21m/e, and T22, as there is + * something else in offset 0x84 according to the ACPI DSDT. Other + * ThinkPads from this same time period (and earlier) probably lack the + * tachometer as well. + * + * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare + * was never fixed by IBM to report the EC firmware version string + * probably support the tachometer (like the early X models), so + * detecting it is quite hard. We need more data to know for sure. + * + * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings + * might result. + * + * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this + * register is not invalidated in ThinkPads that disable tachometer + * readings. Thus, the tachometer readings go stale. + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * IBMACPI_FAN_WR_ACPI_FANS: + * ThinkPad X31, X40, X41. Not available in the X60. + * + * FANS ACPI handle: takes three arguments: low speed, medium speed, + * high speed. ACPI DSDT seems to map these three speeds to levels + * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH + * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") + * + * The speeds are stored on handles + * (FANA:FAN9), (FANC:FANB), (FANE:FAND). + * + * There are three default speed sets, acessible as handles: + * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H + * + * ACPI DSDT switches which set is in use depending on various + * factors. + * + * IBMACPI_FAN_WR_TPEC is also available and should be used to + * command the fan. The X31/X40/X41 seems to have 8 fan levels, + * but the ACPI tables just mention level 7. + */ + static enum fan_status_access_mode fan_status_access_mode; static enum fan_control_access_mode fan_control_access_mode; static enum fan_control_commands fan_control_commands; @@ -1713,6 +1940,14 @@ static void fan_watchdog_fire(struct work_struct *ignored); static int fan_watchdog_maxinterval; static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); +IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ +IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ + "\\FSPD", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ + "JFNS", /* 770x-JL */ + ); /* all others */ + static int fan_init(void) { fan_status_access_mode = IBMACPI_FAN_NONE; @@ -1828,6 +2063,12 @@ static int fan_get_status(u8 *status) return 0; } +static void fan_exit(void) +{ + cancel_delayed_work(&fan_watchdog_task); + flush_scheduled_work(); +} + static int fan_get_speed(unsigned int *speed) { u8 hi, lo; @@ -1851,10 +2092,14 @@ static int fan_get_speed(unsigned int *speed) return 0; } -static void fan_exit(void) +static void fan_watchdog_fire(struct work_struct *ignored) { - cancel_delayed_work(&fan_watchdog_task); - flush_scheduled_work(); + printk(IBM_NOTICE "fan watchdog: enabling fan\n"); + if (fan_set_enable()) { + printk(IBM_ERR "fan watchdog: error while enabling fan\n"); + /* reschedule for later */ + fan_watchdog_reset(); + } } static void fan_watchdog_reset(void) @@ -1876,90 +2121,6 @@ static void fan_watchdog_reset(void) fan_watchdog_active = 0; } -static int fan_read(char *p) -{ - int len = 0; - int rc; - u8 status; - unsigned int speed = 0; - - switch (fan_status_access_mode) { - case IBMACPI_FAN_RD_ACPI_GFAN: - /* 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - len += sprintf(p + len, "status:\t\t%s\n" - "level:\t\t%d\n", - (status != 0) ? "enabled" : "disabled", status); - break; - - case IBMACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - if (unlikely(!fan_control_status_known)) { - if (status != fan_control_initial_status) - fan_control_status_known = 1; - else - /* Return most likely status. In fact, it - * might be the only possible status */ - status = IBMACPI_FAN_EC_AUTO; - } - - len += sprintf(p + len, "status:\t\t%s\n", - (status != 0) ? "enabled" : "disabled"); - - /* No ThinkPad boots on disengaged mode, we can safely - * assume the tachometer is online if fan control status - * was unknown */ - if ((rc = fan_get_speed(&speed)) < 0) - return rc; - - len += sprintf(p + len, "speed:\t\t%d\n", speed); - - if (status & IBMACPI_FAN_EC_DISENGAGED) - /* Disengaged mode takes precedence */ - len += sprintf(p + len, "level:\t\tdisengaged\n"); - else if (status & IBMACPI_FAN_EC_AUTO) - len += sprintf(p + len, "level:\t\tauto\n"); - else - len += sprintf(p + len, "level:\t\t%d\n", status); - break; - - case IBMACPI_FAN_NONE: - default: - len += sprintf(p + len, "status:\t\tnot supported\n"); - } - - if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { - len += sprintf(p + len, "commands:\tlevel <level>"); - - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_SFAN: - len += sprintf(p + len, " (<level> is 0-7)\n"); - break; - - default: - len += sprintf(p + len, " (<level> is 0-7, " - "auto, disengaged)\n"); - break; - } - } - - if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) - len += sprintf(p + len, "commands:\tenable, disable\n" - "commands:\twatchdog <timeout> (<timeout> is 0 (off), " - "1-120 (seconds))\n"); - - if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) - len += sprintf(p + len, "commands:\tspeed <speed>" - " (<speed> is 0-65535)\n"); - - return len; -} - static int fan_set_level(int level) { switch (fan_control_access_mode) { @@ -2071,6 +2232,90 @@ static int fan_set_speed(int speed) return 0; } +static int fan_read(char *p) +{ + int len = 0; + int rc; + u8 status; + unsigned int speed = 0; + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + len += sprintf(p + len, "status:\t\t%s\n" + "level:\t\t%d\n", + (status != 0) ? "enabled" : "disabled", status); + break; + + case IBMACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + if (unlikely(!fan_control_status_known)) { + if (status != fan_control_initial_status) + fan_control_status_known = 1; + else + /* Return most likely status. In fact, it + * might be the only possible status */ + status = IBMACPI_FAN_EC_AUTO; + } + + len += sprintf(p + len, "status:\t\t%s\n", + (status != 0) ? "enabled" : "disabled"); + + /* No ThinkPad boots on disengaged mode, we can safely + * assume the tachometer is online if fan control status + * was unknown */ + if ((rc = fan_get_speed(&speed)) < 0) + return rc; + + len += sprintf(p + len, "speed:\t\t%d\n", speed); + + if (status & IBMACPI_FAN_EC_DISENGAGED) + /* Disengaged mode takes precedence */ + len += sprintf(p + len, "level:\t\tdisengaged\n"); + else if (status & IBMACPI_FAN_EC_AUTO) + len += sprintf(p + len, "level:\t\tauto\n"); + else + len += sprintf(p + len, "level:\t\t%d\n", status); + break; + + case IBMACPI_FAN_NONE: + default: + len += sprintf(p + len, "status:\t\tnot supported\n"); + } + + if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { + len += sprintf(p + len, "commands:\tlevel <level>"); + + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_SFAN: + len += sprintf(p + len, " (<level> is 0-7)\n"); + break; + + default: + len += sprintf(p + len, " (<level> is 0-7, " + "auto, disengaged)\n"); + break; + } + } + + if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) + len += sprintf(p + len, "commands:\tenable, disable\n" + "commands:\twatchdog <timeout> (<timeout> is 0 (off), " + "1-120 (seconds))\n"); + + if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) + len += sprintf(p + len, "commands:\tspeed <speed>" + " (<speed> is 0-65535)\n"); + + return len; +} + static int fan_write_cmd_level(const char *cmd, int *rc) { int level; @@ -2168,16 +2413,18 @@ static int fan_write(char *buf) return rc; } -static void fan_watchdog_fire(struct work_struct *ignored) -{ - printk(IBM_NOTICE "fan watchdog: enabling fan\n"); - if (fan_set_enable()) { - printk(IBM_ERR "fan watchdog: error while enabling fan\n"); - /* reschedule for later */ - fan_watchdog_reset(); - } -} +/**************************************************************************** + **************************************************************************** + * + * Infrastructure + * + **************************************************************************** + ****************************************************************************/ +/* /proc support */ +static struct proc_dir_entry *proc_dir = NULL; + +/* Subdriver registry */ static struct ibm_struct ibms[] = { { .name = "driver", @@ -2298,127 +2545,9 @@ static struct ibm_struct ibms[] = { }, }; -static int dispatch_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - struct ibm_struct *ibm = data; - int len; - - if (!ibm || !ibm->read) - return -EINVAL; - - len = ibm->read(page); - if (len < 0) - return len; - - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - - return len; -} - -static int dispatch_write(struct file *file, const char __user * userbuf, - unsigned long count, void *data) -{ - struct ibm_struct *ibm = data; - char *kernbuf; - int ret; - - if (!ibm || !ibm->write) - return -EINVAL; - - kernbuf = kmalloc(count + 2, GFP_KERNEL); - if (!kernbuf) - return -ENOMEM; - - if (copy_from_user(kernbuf, userbuf, count)) { - kfree(kernbuf); - return -EFAULT; - } - - kernbuf[count] = 0; - strcat(kernbuf, ","); - ret = ibm->write(kernbuf); - if (ret == 0) - ret = count; - - kfree(kernbuf); - - return ret; -} - -static void dispatch_notify(acpi_handle handle, u32 event, void *data) -{ - struct ibm_struct *ibm = data; - - if (!ibm || !ibm->notify) - return; - - ibm->notify(ibm, event); -} - -static int __init setup_notify(struct ibm_struct *ibm) -{ - acpi_status status; - int ret; - - if (!*ibm->handle) - return 0; - - ret = acpi_bus_get_device(*ibm->handle, &ibm->device); - if (ret < 0) { - printk(IBM_ERR "%s device not present\n", ibm->name); - return 0; - } - - acpi_driver_data(ibm->device) = ibm; - sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); - - status = acpi_install_notify_handler(*ibm->handle, ibm->type, - dispatch_notify, ibm); - if (ACPI_FAILURE(status)) { - printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", - ibm->name, status); - return -ENODEV; - } - ibm->notify_installed = 1; - return 0; -} - -static int __init ibm_device_add(struct acpi_device *device) -{ - return 0; -} - -static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) -{ - int ret; - - ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); - if (!ibm->driver) { - printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); - return -1; - } - - sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); - ibm->driver->ids = ibm->hid; - ibm->driver->ops.add = &ibm_device_add; - - ret = acpi_bus_register_driver(ibm->driver); - if (ret < 0) { - printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", - ibm->hid, ret); - kfree(ibm->driver); - } - - return ret; -} +/* + * Module and infrastructure proble, init and exit handling + */ static int __init ibm_init(struct ibm_struct *ibm) { @@ -2486,27 +2615,35 @@ static void ibm_exit(struct ibm_struct *ibm) } } -static void __init ibm_handle_init(char *name, - acpi_handle * handle, acpi_handle parent, - char **paths, int num_paths, char **path) +/* Probing */ + +static char *ibm_thinkpad_ec_found = NULL; + +static char* __init check_dmi_for_ec(void) { - int i; - acpi_status status; + struct dmi_device *dev = NULL; + char ec_fw_string[18]; - for (i = 0; i < num_paths; i++) { - status = acpi_get_handle(parent, paths[i], handle); - if (ACPI_SUCCESS(status)) { - *path = paths[i]; - return; + /* + * ThinkPad T23 or newer, A31 or newer, R50e or newer, + * X32 or newer, all Z series; Some models must have an + * up-to-date BIOS or they will not be detected. + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + */ + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { + if (sscanf(dev->name, + "IBM ThinkPad Embedded Controller -[%17c", + ec_fw_string) == 1) { + ec_fw_string[sizeof(ec_fw_string) - 1] = 0; + ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; + return kstrdup(ec_fw_string, GFP_KERNEL); } } - - *handle = NULL; + return NULL; } -#define IBM_HANDLE_INIT(object) \ - ibm_handle_init(#object, &object##_handle, *object##_parent, \ - object##_paths, ARRAY_SIZE(object##_paths), &object##_path) +/* Module init, exit, parameters */ static int __init set_ibm_param(const char *val, struct kernel_param *kp) { @@ -2524,6 +2661,9 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) return -EINVAL; } +static int experimental; +module_param(experimental, int, 0); + #define IBM_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0) @@ -2545,44 +2685,6 @@ IBM_PARAM(brightness); IBM_PARAM(volume); IBM_PARAM(fan); -static void acpi_ibm_exit(void) -{ - int i; - - for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) - ibm_exit(&ibms[i]); - - if (proc_dir) - remove_proc_entry(IBM_DIR, acpi_root_dir); - - if (ibm_thinkpad_ec_found) - kfree(ibm_thinkpad_ec_found); -} - -static char* __init check_dmi_for_ec(void) -{ - struct dmi_device *dev = NULL; - char ec_fw_string[18]; - - /* - * ThinkPad T23 or newer, A31 or newer, R50e or newer, - * X32 or newer, all Z series; Some models must have an - * up-to-date BIOS or they will not be detected. - * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs - */ - while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { - if (sscanf(dev->name, - "IBM ThinkPad Embedded Controller -[%17c", - ec_fw_string) == 1) { - ec_fw_string[sizeof(ec_fw_string) - 1] = 0; - ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; - return kstrdup(ec_fw_string, GFP_KERNEL); - } - } - return NULL; -} - static int __init acpi_ibm_init(void) { int ret, i; @@ -2648,5 +2750,19 @@ static int __init acpi_ibm_init(void) return 0; } +static void acpi_ibm_exit(void) +{ + int i; + + for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) + ibm_exit(&ibms[i]); + + if (proc_dir) + remove_proc_entry(IBM_DIR, acpi_root_dir); + + if (ibm_thinkpad_ec_found) + kfree(ibm_thinkpad_ec_found); +} + module_init(acpi_ibm_init); module_exit(acpi_ibm_exit); -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/5] ACPI: ibm-acpi: organize code @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Shuffle code around to better organize the driver code inside the ibm-acpi.c file. This patch adds no functional changes. It is pure fluff that will make me a bit more productive. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- drivers/acpi/ibm_acpi.c | 1382 +++++++++++++++++++++++++---------------------- 1 files changed, 749 insertions(+), 633 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index bfa1b09..3158fc3 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -87,8 +87,17 @@ MODULE_LICENSE("GPL"); #define __unused __attribute__ ((unused)) -static int experimental; -module_param(experimental, int, 0); +/**************************************************************************** + **************************************************************************** + * + * ACPI Helpers and device model + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ACPI basic handles + */ static acpi_handle root_handle = NULL; @@ -105,183 +114,31 @@ IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */ "\\_SB.PCI0.ICH3.EC0", /* R31 */ "\\_SB.PCI0.LPC.EC", /* all others */ - ); + ); -IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ - "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ - "\\_SB.PCI0.VID0", /* 770e */ - "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ - "\\_SB.PCI0.AGP.VID", /* all others */ - ); /* R30, R31 */ +IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ +IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + +/************************************************************************* + * Misc ACPI handles + */ IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ "\\CMS", /* R40, R40e */ - ); /* all others */ -#ifdef CONFIG_ACPI_IBM_DOCK -IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ - "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ - "\\_SB.PCI0.PCI1.DOCK", /* all others */ - "\\_SB.PCI.ISA.SLCE", /* 570 */ - ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ -#endif -#ifdef CONFIG_ACPI_IBM_BAY -IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ - "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ - "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ - "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ - ); /* A21e, R30, R31 */ - -IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ - "_EJ0", /* all others */ - ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ - -IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ - "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ - "_EJ0", /* 770x */ - ); /* all others */ -#endif /* CONFIG_ACPI_IBM_BAY */ - -/* don't list other alternatives as we install a notify handler on the 570 */ -IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ + ); /* all others */ IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ "^HKEY", /* R30, R31 */ "HKEY", /* all others */ - ); /* 570 */ - -IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ -IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ - -IBM_HANDLE(led, ec, "SLED", /* 570 */ - "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - "LED", /* all others */ - ); /* R30, R31 */ - -IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ -IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ -IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ + ); /* 570 */ -IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ - "\\FSPD", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ - "JFNS", /* 770x-JL */ - ); /* all others */ -/* - * FAN ACCESS MODES - * - * IBMACPI_FAN_RD_ACPI_GFAN: - * ACPI GFAN method: returns fan level - * - * see IBMACPI_FAN_WR_ACPI_SFAN - * EC 0x2f not available if GFAN exists - * - * IBMACPI_FAN_WR_ACPI_SFAN: - * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) - * - * EC 0x2f might be available *for reading*, but never for writing. - * - * IBMACPI_FAN_WR_TPEC: - * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported - * on almost all ThinkPads - * - * Fan speed changes of any sort (including those caused by the - * disengaged mode) are usually done slowly by the firmware as the - * maximum ammount of fan duty cycle change per second seems to be - * limited. - * - * Reading is not available if GFAN exists. - * Writing is not available if SFAN exists. - * - * Bits - * 7 automatic mode engaged; - * (default operation mode of the ThinkPad) - * fan level is ignored in this mode. - * 6 disengage mode (takes precedence over bit 7); - * not available on all thinkpads. May disable - * the tachometer, and speeds up fan to 100% duty-cycle, - * which speeds it up far above the standard RPM - * levels. It is not impossible that it could cause - * hardware damage. - * 5-3 unused in some models. Extra bits for fan level - * in others, but still useless as all values above - * 7 map to the same speed as level 7 in these models. - * 2-0 fan level (0..7 usually) - * 0x00 = stop - * 0x07 = max (set when temperatures critical) - * Some ThinkPads may have other levels, see - * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) - * - * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at - * boot. Apparently the EC does not intialize it, so unless ACPI DSDT - * does so, its initial value is meaningless (0x07). - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * ---- - * - * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): - * Main fan tachometer reading (in RPM) - * - * This register is present on all ThinkPads with a new-style EC, and - * it is known not to be present on the A21m/e, and T22, as there is - * something else in offset 0x84 according to the ACPI DSDT. Other - * ThinkPads from this same time period (and earlier) probably lack the - * tachometer as well. - * - * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare - * was never fixed by IBM to report the EC firmware version string - * probably support the tachometer (like the early X models), so - * detecting it is quite hard. We need more data to know for sure. - * - * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings - * might result. - * - * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this - * register is not invalidated in ThinkPads that disable tachometer - * readings. Thus, the tachometer readings go stale. - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * IBMACPI_FAN_WR_ACPI_FANS: - * ThinkPad X31, X40, X41. Not available in the X60. - * - * FANS ACPI handle: takes three arguments: low speed, medium speed, - * high speed. ACPI DSDT seems to map these three speeds to levels - * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH - * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") - * - * The speeds are stored on handles - * (FANA:FAN9), (FANC:FANB), (FANE:FAND). - * - * There are three default speed sets, acessible as handles: - * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H - * - * ACPI DSDT switches which set is in use depending on various - * factors. - * - * IBMACPI_FAN_WR_TPEC is also available and should be used to - * command the fan. The X31/X40/X41 seems to have 8 fan levels, - * but the ACPI tables just mention level 7. +/************************************************************************* + * ACPI helpers */ -static char *ibm_thinkpad_ec_found = NULL; - -static struct proc_dir_entry *proc_dir = NULL; - -static struct backlight_device *ibm_backlight_device = NULL; - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -371,6 +228,198 @@ static void __unused acpi_print_int(acpi_handle handle, char *method) printk(IBM_ERR "error calling %s\n", method); } +static int acpi_ec_read(int i, u8 * p) +{ + int v; + + if (ecrd_handle) { + if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) + return 0; + *p = v; + } else { + if (ec_read(i, p) < 0) + return 0; + } + + return 1; +} + +static int acpi_ec_write(int i, u8 v) +{ + if (ecwr_handle) { + if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) + return 0; + } else { + if (ec_write(i, v) < 0) + return 0; + } + + return 1; +} + +static int _sta(acpi_handle handle) +{ + int status; + + if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) + status = 0; + + return status; +} + +/************************************************************************* + * ACPI device model + */ + +static void __init ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path) +{ + int i; + acpi_status status; + + for (i = 0; i < num_paths; i++) { + status = acpi_get_handle(parent, paths[i], handle); + if (ACPI_SUCCESS(status)) { + *path = paths[i]; + return; + } + } + + *handle = NULL; +} + +static void dispatch_notify(acpi_handle handle, u32 event, void *data) +{ + struct ibm_struct *ibm = data; + + if (!ibm || !ibm->notify) + return; + + ibm->notify(ibm, event); +} + +static int __init setup_notify(struct ibm_struct *ibm) +{ + acpi_status status; + int ret; + + if (!*ibm->handle) + return 0; + + ret = acpi_bus_get_device(*ibm->handle, &ibm->device); + if (ret < 0) { + printk(IBM_ERR "%s device not present\n", ibm->name); + return 0; + } + + acpi_driver_data(ibm->device) = ibm; + sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); + + status = acpi_install_notify_handler(*ibm->handle, ibm->type, + dispatch_notify, ibm); + if (ACPI_FAILURE(status)) { + printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", + ibm->name, status); + return -ENODEV; + } + ibm->notify_installed = 1; + return 0; +} + +static int __init ibm_device_add(struct acpi_device *device) +{ + return 0; +} + +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) +{ + int ret; + + ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); + if (!ibm->driver) { + printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); + return -1; + } + + sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); + ibm->driver->ids = ibm->hid; + ibm->driver->ops.add = &ibm_device_add; + + ret = acpi_bus_register_driver(ibm->driver); + if (ret < 0) { + printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", + ibm->hid, ret); + kfree(ibm->driver); + } + + return ret; +} + + +/**************************************************************************** + **************************************************************************** + * + * Procfs Helpers + * + **************************************************************************** + ****************************************************************************/ + +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + struct ibm_struct *ibm = data; + int len; + + if (!ibm || !ibm->read) + return -EINVAL; + + len = ibm->read(page); + if (len < 0) + return len; + + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data) +{ + struct ibm_struct *ibm = data; + char *kernbuf; + int ret; + + if (!ibm || !ibm->write) + return -EINVAL; + + kernbuf = kmalloc(count + 2, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; + + if (copy_from_user(kernbuf, userbuf, count)) { + kfree(kernbuf); + return -EFAULT; + } + + kernbuf[count] = 0; + strcat(kernbuf, ","); + ret = ibm->write(kernbuf); + if (ret == 0) + ret = count; + + kfree(kernbuf); + + return ret; +} + static char *next_cmd(char **cmds) { char *start = *cmds; @@ -387,6 +436,19 @@ static char *next_cmd(char **cmds) return start; } + +/**************************************************************************** + **************************************************************************** + * + * Subdrivers + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ibm-acpi init subdriver + */ + static int ibm_acpi_driver_init(void) { printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); @@ -409,11 +471,51 @@ static int ibm_acpi_driver_read(char *p) return len; } +/************************************************************************* + * Hotkey subdriver + */ + static int hotkey_supported; static int hotkey_mask_supported; static int hotkey_orig_status; static int hotkey_orig_mask; +static int hotkey_init(void) +{ + /* hotkey not supported on 570 */ + hotkey_supported = hkey_handle != NULL; + + if (hotkey_supported) { + /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + A30, R30, R31, T20-22, X20-21, X22-24 */ + hotkey_mask_supported = + acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); + + if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) + return -ENODEV; + } + + return 0; +} + +static void hotkey_exit(void) +{ + if (hotkey_supported) + hotkey_set(hotkey_orig_status, hotkey_orig_mask); +} + +static void hotkey_notify(struct ibm_struct *ibm, u32 event) +{ + int hkey; + + if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) + acpi_bus_generate_event(ibm->device, event, hkey); + else { + printk(IBM_ERR "unknown hotkey event %d\n", event); + acpi_bus_generate_event(ibm->device, event, 0); + } +} + static int hotkey_get(int *status, int *mask) { if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) @@ -444,24 +546,6 @@ static int hotkey_set(int status, int mask) return 1; } -static int hotkey_init(void) -{ - /* hotkey not supported on 570 */ - hotkey_supported = hkey_handle != NULL; - - if (hotkey_supported) { - /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - A30, R30, R31, T20-22, X20-21, X22-24 */ - hotkey_mask_supported = - acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); - - if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) - return -ENODEV; - } - - return 0; -} - static int hotkey_read(char *p) { int status, mask; @@ -523,23 +607,9 @@ static int hotkey_write(char *buf) return 0; } -static void hotkey_exit(void) -{ - if (hotkey_supported) - hotkey_set(hotkey_orig_status, hotkey_orig_mask); -} - -static void hotkey_notify(struct ibm_struct *ibm, u32 event) -{ - int hkey; - - if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) - acpi_bus_generate_event(ibm->device, event, hkey); - else { - printk(IBM_ERR "unknown hotkey event %d\n", event); - acpi_bus_generate_event(ibm->device, event, 0); - } -} +/************************************************************************* + * Bluetooth subdriver + */ static int bluetooth_supported; @@ -606,6 +676,10 @@ static int bluetooth_write(char *buf) return 0; } +/************************************************************************* + * Wan subdriver + */ + static int wan_supported; static int wan_init(void) @@ -668,9 +742,22 @@ static int wan_write(char *buf) return 0; } +/************************************************************************* + * Video subdriver + */ + static enum video_access_mode video_supported; static int video_orig_autosw; +IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ + "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ + "\\_SB.PCI0.VID0", /* 770e */ + "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ + "\\_SB.PCI0.AGP.VID", /* all others */ + ); /* R30, R31 */ + +IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + static int video_init(void) { int ivga; @@ -695,6 +782,11 @@ static int video_init(void) return 0; } +static void video_exit(void) +{ + acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); +} + static int video_status(void) { int status = 0; @@ -736,33 +828,6 @@ static int video_autosw(void) return autosw & 1; } -static int video_read(char *p) -{ - int status = video_status(); - int autosw = video_autosw(); - int len = 0; - - if (!video_supported) { - len += sprintf(p + len, "status:\t\tnot supported\n"); - return len; - } - - len += sprintf(p + len, "status:\t\tsupported\n"); - len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); - len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); - len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); - len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); - len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); - len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); - len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); - - return len; -} - static int video_switch(void) { int autosw = video_autosw(); @@ -812,6 +877,33 @@ static int video_switch2(int status) return ret; } +static int video_read(char *p) +{ + int status = video_status(); + int autosw = video_autosw(); + int len = 0; + + if (!video_supported) { + len += sprintf(p + len, "status:\t\tnot supported\n"); + return len; + } + + len += sprintf(p + len, "status:\t\tsupported\n"); + len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); + len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); + len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); + len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); + len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); + len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); + len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); + + return len; +} + static int video_write(char *buf) { char *cmd; @@ -862,14 +954,16 @@ static int video_write(char *buf) return 0; } -static void video_exit(void) -{ - acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); -} +/************************************************************************* + * Light (thinklight) subdriver + */ static int light_supported; static int light_status_supported; +IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ +IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ + static int light_init(void) { /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */ @@ -933,21 +1027,45 @@ static int light_write(char *buf) return 0; } -#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY) -static int _sta(acpi_handle handle) -{ - int status; - - if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) - status = 0; +/************************************************************************* + * Dock subdriver + */ - return status; -} -#endif +/* don't list other alternatives as we install a notify handler on the 570 */ +IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ #ifdef CONFIG_ACPI_IBM_DOCK + +IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ + "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ + "\\_SB.PCI0.PCI1.DOCK", /* all others */ + "\\_SB.PCI.ISA.SLCE", /* 570 */ + ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ + #define dock_docked() (_sta(dock_handle) & 1) +static void dock_notify(struct ibm_struct *ibm, u32 event) +{ + int docked = dock_docked(); + int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); + + if (event == 1 && !pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 1 && pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else if (event == 3 && docked) + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 3 && !docked) + acpi_bus_generate_event(ibm->device, event, 2); /* undock */ + else if (event == 0 && docked) + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else { + printk(IBM_ERR "unknown dock event %d, status %d\n", + event, _sta(dock_handle)); + acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ + } +} + static int dock_read(char *p) { int len = 0; @@ -987,28 +1105,11 @@ static int dock_write(char *buf) return 0; } -static void dock_notify(struct ibm_struct *ibm, u32 event) -{ - int docked = dock_docked(); - int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); +#endif /* CONFIG_ACPI_IBM_DOCK */ - if (event == 1 && !pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 1 && pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else if (event == 3 && docked) - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 3 && !docked) - acpi_bus_generate_event(ibm->device, event, 2); /* undock */ - else if (event == 0 && docked) - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else { - printk(IBM_ERR "unknown dock event %d, status %d\n", - event, _sta(dock_handle)); - acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ - } -} -#endif +/************************************************************************* + * Bay subdriver + */ #ifdef CONFIG_ACPI_IBM_BAY static int bay_status_supported; @@ -1016,6 +1117,21 @@ static int bay_status2_supported; static int bay_eject_supported; static int bay_eject2_supported; +IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ + "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ + "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ + "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ + ); /* A21e, R30, R31 */ +IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ + "_EJ0", /* all others */ + ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ +IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ + "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ + "_EJ0", /* 770x */ + ); /* all others */ + static int bay_init(void) { bay_status_supported = bay_handle && @@ -1031,6 +1147,11 @@ static int bay_init(void) return 0; } +static void bay_notify(struct ibm_struct *ibm, u32 event) +{ + acpi_bus_generate_event(ibm->device, event, 0); +} + #define bay_occupied(b) (_sta(b##_handle) & 1) static int bay_read(char *p) @@ -1081,12 +1202,19 @@ static int bay_write(char *buf) return 0; } +#endif /* CONFIG_ACPI_IBM_BAY */ -static void bay_notify(struct ibm_struct *ibm, u32 event) +/************************************************************************* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd) { - acpi_bus_generate_event(ibm->device, event, 0); + if (cmos_handle) + return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); + else + return 1; } -#endif /* CONFIG_ACPI_IBM_BAY */ static int cmos_read(char *p) { @@ -1104,14 +1232,6 @@ static int cmos_read(char *p) return len; } -static int cmos_eval(int cmos_cmd) -{ - if (cmos_handle) - return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); - else - return 1; -} - static int cmos_write(char *buf) { char *cmd; @@ -1134,8 +1254,18 @@ static int cmos_write(char *buf) return 0; } + +/************************************************************************* + * LED subdriver + */ + static enum led_access_mode led_supported; +IBM_HANDLE(led, ec, "SLED", /* 570 */ + "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + "LED", /* all others */ + ); /* R30, R31 */ + static int led_init(void) { if (!led_handle) @@ -1242,6 +1372,12 @@ static int led_write(char *buf) return 0; } +/************************************************************************* + * Beep subdriver + */ + +IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ + static int beep_read(char *p) { int len = 0; @@ -1277,34 +1413,9 @@ static int beep_write(char *buf) return 0; } -static int acpi_ec_read(int i, u8 * p) -{ - int v; - - if (ecrd_handle) { - if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) - return 0; - *p = v; - } else { - if (ec_read(i, p) < 0) - return 0; - } - - return 1; -} - -static int acpi_ec_write(int i, u8 v) -{ - if (ecwr_handle) { - if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) - return 0; - } else { - if (ec_write(i, v) < 0) - return 0; - } - - return 1; -} +/************************************************************************* + * Thermal subdriver + */ static enum thermal_access_mode thermal_read_mode; @@ -1446,6 +1557,10 @@ static int thermal_read(char *p) return len; } +/************************************************************************* + * EC Dump subdriver + */ + static u8 ecdump_regs[256]; static int ecdump_read(char *p) @@ -1505,6 +1620,52 @@ static int ecdump_write(char *buf) return 0; } +/************************************************************************* + * Backlight/brightness subdriver + */ + +static struct backlight_device *ibm_backlight_device = NULL; + +static struct backlight_ops ibm_backlight_data = { + .get_brightness = brightness_get, + .update_status = brightness_update_status, +}; + +static int brightness_init(void) +{ + int b; + + b = brightness_get(NULL); + if (b < 0) + return b; + + ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, + &ibm_backlight_data); + if (IS_ERR(ibm_backlight_device)) { + printk(IBM_ERR "Could not register backlight device\n"); + return PTR_ERR(ibm_backlight_device); + } + + ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.brightness = b; + backlight_update_status(ibm_backlight_device); + + return 0; +} + +static void brightness_exit(void) +{ + if (ibm_backlight_device) { + backlight_device_unregister(ibm_backlight_device); + ibm_backlight_device = NULL; + } +} + +static int brightness_update_status(struct backlight_device *bd) +{ + return brightness_set(bd->props.brightness); +} + static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1516,23 +1677,6 @@ static int brightness_get(struct backlight_device *bd) return level; } -static int brightness_read(char *p) -{ - int len = 0; - int level; - - if ((level = brightness_get(NULL)) < 0) { - len += sprintf(p + len, "level:\t\tunreadable\n"); - } else { - len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); - len += sprintf(p + len, "commands:\tup, down\n"); - len += sprintf(p + len, "commands:\tlevel <level>" - " (<level> is 0-7)\n"); - } - - return len; -} - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1540,8 +1684,7 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? - TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1553,6 +1696,23 @@ static int brightness_set(int value) return 0; } +static int brightness_read(char *p) +{ + int len = 0; + int level; + + if ((level = brightness_get(NULL)) < 0) { + len += sprintf(p + len, "level:\t\tunreadable\n"); + } else { + len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); + len += sprintf(p + len, "commands:\tup, down\n"); + len += sprintf(p + len, "commands:\tlevel <level>" + " (<level> is 0-7)\n"); + } + + return len; +} + static int brightness_write(char *buf) { int level; @@ -1580,45 +1740,9 @@ static int brightness_write(char *buf) return 0; } -static int brightness_update_status(struct backlight_device *bd) -{ - return brightness_set(bd->props.brightness); -} - -static struct backlight_ops ibm_backlight_data = { - .get_brightness = brightness_get, - .update_status = brightness_update_status, -}; - -static int brightness_init(void) -{ - int b; - - b = brightness_get(NULL); - if (b < 0) - return b; - - ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, - &ibm_backlight_data); - if (IS_ERR(ibm_backlight_device)) { - printk(IBM_ERR "Could not register backlight device\n"); - return PTR_ERR(ibm_backlight_device); - } - - ibm_backlight_device->props.max_brightness = 7; - ibm_backlight_device->props.brightness = b; - backlight_update_status(ibm_backlight_device); - - return 0; -} - -static void brightness_exit(void) -{ - if (ibm_backlight_device) { - backlight_device_unregister(ibm_backlight_device); - ibm_backlight_device = NULL; - } -} +/************************************************************************* + * Volume subdriver + */ static int volume_read(char *p) { @@ -1670,8 +1794,7 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? - TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; + cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1690,8 +1813,7 @@ static int volume_write(char *buf) } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? - TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; + cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -1702,6 +1824,111 @@ static int volume_write(char *buf) return 0; } + +/************************************************************************* + * Fan subdriver + */ + +/* + * FAN ACCESS MODES + * + * IBMACPI_FAN_RD_ACPI_GFAN: + * ACPI GFAN method: returns fan level + * + * see IBMACPI_FAN_WR_ACPI_SFAN + * EC 0x2f not available if GFAN exists + * + * IBMACPI_FAN_WR_ACPI_SFAN: + * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) + * + * EC 0x2f might be available *for reading*, but never for writing. + * + * IBMACPI_FAN_WR_TPEC: + * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported + * on almost all ThinkPads + * + * Fan speed changes of any sort (including those caused by the + * disengaged mode) are usually done slowly by the firmware as the + * maximum ammount of fan duty cycle change per second seems to be + * limited. + * + * Reading is not available if GFAN exists. + * Writing is not available if SFAN exists. + * + * Bits + * 7 automatic mode engaged; + * (default operation mode of the ThinkPad) + * fan level is ignored in this mode. + * 6 disengage mode (takes precedence over bit 7); + * not available on all thinkpads. May disable + * the tachometer, and speeds up fan to 100% duty-cycle, + * which speeds it up far above the standard RPM + * levels. It is not impossible that it could cause + * hardware damage. + * 5-3 unused in some models. Extra bits for fan level + * in others, but still useless as all values above + * 7 map to the same speed as level 7 in these models. + * 2-0 fan level (0..7 usually) + * 0x00 = stop + * 0x07 = max (set when temperatures critical) + * Some ThinkPads may have other levels, see + * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) + * + * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at + * boot. Apparently the EC does not intialize it, so unless ACPI DSDT + * does so, its initial value is meaningless (0x07). + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * ---- + * + * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): + * Main fan tachometer reading (in RPM) + * + * This register is present on all ThinkPads with a new-style EC, and + * it is known not to be present on the A21m/e, and T22, as there is + * something else in offset 0x84 according to the ACPI DSDT. Other + * ThinkPads from this same time period (and earlier) probably lack the + * tachometer as well. + * + * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare + * was never fixed by IBM to report the EC firmware version string + * probably support the tachometer (like the early X models), so + * detecting it is quite hard. We need more data to know for sure. + * + * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings + * might result. + * + * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this + * register is not invalidated in ThinkPads that disable tachometer + * readings. Thus, the tachometer readings go stale. + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * IBMACPI_FAN_WR_ACPI_FANS: + * ThinkPad X31, X40, X41. Not available in the X60. + * + * FANS ACPI handle: takes three arguments: low speed, medium speed, + * high speed. ACPI DSDT seems to map these three speeds to levels + * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH + * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") + * + * The speeds are stored on handles + * (FANA:FAN9), (FANC:FANB), (FANE:FAND). + * + * There are three default speed sets, acessible as handles: + * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H + * + * ACPI DSDT switches which set is in use depending on various + * factors. + * + * IBMACPI_FAN_WR_TPEC is also available and should be used to + * command the fan. The X31/X40/X41 seems to have 8 fan levels, + * but the ACPI tables just mention level 7. + */ + static enum fan_status_access_mode fan_status_access_mode; static enum fan_control_access_mode fan_control_access_mode; static enum fan_control_commands fan_control_commands; @@ -1713,6 +1940,14 @@ static void fan_watchdog_fire(struct work_struct *ignored); static int fan_watchdog_maxinterval; static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); +IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ +IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ + "\\FSPD", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ + "JFNS", /* 770x-JL */ + ); /* all others */ + static int fan_init(void) { fan_status_access_mode = IBMACPI_FAN_NONE; @@ -1828,6 +2063,12 @@ static int fan_get_status(u8 *status) return 0; } +static void fan_exit(void) +{ + cancel_delayed_work(&fan_watchdog_task); + flush_scheduled_work(); +} + static int fan_get_speed(unsigned int *speed) { u8 hi, lo; @@ -1851,10 +2092,14 @@ static int fan_get_speed(unsigned int *speed) return 0; } -static void fan_exit(void) +static void fan_watchdog_fire(struct work_struct *ignored) { - cancel_delayed_work(&fan_watchdog_task); - flush_scheduled_work(); + printk(IBM_NOTICE "fan watchdog: enabling fan\n"); + if (fan_set_enable()) { + printk(IBM_ERR "fan watchdog: error while enabling fan\n"); + /* reschedule for later */ + fan_watchdog_reset(); + } } static void fan_watchdog_reset(void) @@ -1876,90 +2121,6 @@ static void fan_watchdog_reset(void) fan_watchdog_active = 0; } -static int fan_read(char *p) -{ - int len = 0; - int rc; - u8 status; - unsigned int speed = 0; - - switch (fan_status_access_mode) { - case IBMACPI_FAN_RD_ACPI_GFAN: - /* 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - len += sprintf(p + len, "status:\t\t%s\n" - "level:\t\t%d\n", - (status != 0) ? "enabled" : "disabled", status); - break; - - case IBMACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - if (unlikely(!fan_control_status_known)) { - if (status != fan_control_initial_status) - fan_control_status_known = 1; - else - /* Return most likely status. In fact, it - * might be the only possible status */ - status = IBMACPI_FAN_EC_AUTO; - } - - len += sprintf(p + len, "status:\t\t%s\n", - (status != 0) ? "enabled" : "disabled"); - - /* No ThinkPad boots on disengaged mode, we can safely - * assume the tachometer is online if fan control status - * was unknown */ - if ((rc = fan_get_speed(&speed)) < 0) - return rc; - - len += sprintf(p + len, "speed:\t\t%d\n", speed); - - if (status & IBMACPI_FAN_EC_DISENGAGED) - /* Disengaged mode takes precedence */ - len += sprintf(p + len, "level:\t\tdisengaged\n"); - else if (status & IBMACPI_FAN_EC_AUTO) - len += sprintf(p + len, "level:\t\tauto\n"); - else - len += sprintf(p + len, "level:\t\t%d\n", status); - break; - - case IBMACPI_FAN_NONE: - default: - len += sprintf(p + len, "status:\t\tnot supported\n"); - } - - if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { - len += sprintf(p + len, "commands:\tlevel <level>"); - - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_SFAN: - len += sprintf(p + len, " (<level> is 0-7)\n"); - break; - - default: - len += sprintf(p + len, " (<level> is 0-7, " - "auto, disengaged)\n"); - break; - } - } - - if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) - len += sprintf(p + len, "commands:\tenable, disable\n" - "commands:\twatchdog <timeout> (<timeout> is 0 (off), " - "1-120 (seconds))\n"); - - if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) - len += sprintf(p + len, "commands:\tspeed <speed>" - " (<speed> is 0-65535)\n"); - - return len; -} - static int fan_set_level(int level) { switch (fan_control_access_mode) { @@ -2071,6 +2232,90 @@ static int fan_set_speed(int speed) return 0; } +static int fan_read(char *p) +{ + int len = 0; + int rc; + u8 status; + unsigned int speed = 0; + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + len += sprintf(p + len, "status:\t\t%s\n" + "level:\t\t%d\n", + (status != 0) ? "enabled" : "disabled", status); + break; + + case IBMACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + if (unlikely(!fan_control_status_known)) { + if (status != fan_control_initial_status) + fan_control_status_known = 1; + else + /* Return most likely status. In fact, it + * might be the only possible status */ + status = IBMACPI_FAN_EC_AUTO; + } + + len += sprintf(p + len, "status:\t\t%s\n", + (status != 0) ? "enabled" : "disabled"); + + /* No ThinkPad boots on disengaged mode, we can safely + * assume the tachometer is online if fan control status + * was unknown */ + if ((rc = fan_get_speed(&speed)) < 0) + return rc; + + len += sprintf(p + len, "speed:\t\t%d\n", speed); + + if (status & IBMACPI_FAN_EC_DISENGAGED) + /* Disengaged mode takes precedence */ + len += sprintf(p + len, "level:\t\tdisengaged\n"); + else if (status & IBMACPI_FAN_EC_AUTO) + len += sprintf(p + len, "level:\t\tauto\n"); + else + len += sprintf(p + len, "level:\t\t%d\n", status); + break; + + case IBMACPI_FAN_NONE: + default: + len += sprintf(p + len, "status:\t\tnot supported\n"); + } + + if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { + len += sprintf(p + len, "commands:\tlevel <level>"); + + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_SFAN: + len += sprintf(p + len, " (<level> is 0-7)\n"); + break; + + default: + len += sprintf(p + len, " (<level> is 0-7, " + "auto, disengaged)\n"); + break; + } + } + + if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) + len += sprintf(p + len, "commands:\tenable, disable\n" + "commands:\twatchdog <timeout> (<timeout> is 0 (off), " + "1-120 (seconds))\n"); + + if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) + len += sprintf(p + len, "commands:\tspeed <speed>" + " (<speed> is 0-65535)\n"); + + return len; +} + static int fan_write_cmd_level(const char *cmd, int *rc) { int level; @@ -2168,16 +2413,18 @@ static int fan_write(char *buf) return rc; } -static void fan_watchdog_fire(struct work_struct *ignored) -{ - printk(IBM_NOTICE "fan watchdog: enabling fan\n"); - if (fan_set_enable()) { - printk(IBM_ERR "fan watchdog: error while enabling fan\n"); - /* reschedule for later */ - fan_watchdog_reset(); - } -} +/**************************************************************************** + **************************************************************************** + * + * Infrastructure + * + **************************************************************************** + ****************************************************************************/ +/* /proc support */ +static struct proc_dir_entry *proc_dir = NULL; + +/* Subdriver registry */ static struct ibm_struct ibms[] = { { .name = "driver", @@ -2298,127 +2545,9 @@ static struct ibm_struct ibms[] = { }, }; -static int dispatch_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - struct ibm_struct *ibm = data; - int len; - - if (!ibm || !ibm->read) - return -EINVAL; - - len = ibm->read(page); - if (len < 0) - return len; - - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - - return len; -} - -static int dispatch_write(struct file *file, const char __user * userbuf, - unsigned long count, void *data) -{ - struct ibm_struct *ibm = data; - char *kernbuf; - int ret; - - if (!ibm || !ibm->write) - return -EINVAL; - - kernbuf = kmalloc(count + 2, GFP_KERNEL); - if (!kernbuf) - return -ENOMEM; - - if (copy_from_user(kernbuf, userbuf, count)) { - kfree(kernbuf); - return -EFAULT; - } - - kernbuf[count] = 0; - strcat(kernbuf, ","); - ret = ibm->write(kernbuf); - if (ret == 0) - ret = count; - - kfree(kernbuf); - - return ret; -} - -static void dispatch_notify(acpi_handle handle, u32 event, void *data) -{ - struct ibm_struct *ibm = data; - - if (!ibm || !ibm->notify) - return; - - ibm->notify(ibm, event); -} - -static int __init setup_notify(struct ibm_struct *ibm) -{ - acpi_status status; - int ret; - - if (!*ibm->handle) - return 0; - - ret = acpi_bus_get_device(*ibm->handle, &ibm->device); - if (ret < 0) { - printk(IBM_ERR "%s device not present\n", ibm->name); - return 0; - } - - acpi_driver_data(ibm->device) = ibm; - sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); - - status = acpi_install_notify_handler(*ibm->handle, ibm->type, - dispatch_notify, ibm); - if (ACPI_FAILURE(status)) { - printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", - ibm->name, status); - return -ENODEV; - } - ibm->notify_installed = 1; - return 0; -} - -static int __init ibm_device_add(struct acpi_device *device) -{ - return 0; -} - -static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) -{ - int ret; - - ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); - if (!ibm->driver) { - printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); - return -1; - } - - sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); - ibm->driver->ids = ibm->hid; - ibm->driver->ops.add = &ibm_device_add; - - ret = acpi_bus_register_driver(ibm->driver); - if (ret < 0) { - printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", - ibm->hid, ret); - kfree(ibm->driver); - } - - return ret; -} +/* + * Module and infrastructure proble, init and exit handling + */ static int __init ibm_init(struct ibm_struct *ibm) { @@ -2486,27 +2615,35 @@ static void ibm_exit(struct ibm_struct *ibm) } } -static void __init ibm_handle_init(char *name, - acpi_handle * handle, acpi_handle parent, - char **paths, int num_paths, char **path) +/* Probing */ + +static char *ibm_thinkpad_ec_found = NULL; + +static char* __init check_dmi_for_ec(void) { - int i; - acpi_status status; + struct dmi_device *dev = NULL; + char ec_fw_string[18]; - for (i = 0; i < num_paths; i++) { - status = acpi_get_handle(parent, paths[i], handle); - if (ACPI_SUCCESS(status)) { - *path = paths[i]; - return; + /* + * ThinkPad T23 or newer, A31 or newer, R50e or newer, + * X32 or newer, all Z series; Some models must have an + * up-to-date BIOS or they will not be detected. + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + */ + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { + if (sscanf(dev->name, + "IBM ThinkPad Embedded Controller -[%17c", + ec_fw_string) == 1) { + ec_fw_string[sizeof(ec_fw_string) - 1] = 0; + ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; + return kstrdup(ec_fw_string, GFP_KERNEL); } } - - *handle = NULL; + return NULL; } -#define IBM_HANDLE_INIT(object) \ - ibm_handle_init(#object, &object##_handle, *object##_parent, \ - object##_paths, ARRAY_SIZE(object##_paths), &object##_path) +/* Module init, exit, parameters */ static int __init set_ibm_param(const char *val, struct kernel_param *kp) { @@ -2524,6 +2661,9 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) return -EINVAL; } +static int experimental; +module_param(experimental, int, 0); + #define IBM_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0) @@ -2545,44 +2685,6 @@ IBM_PARAM(brightness); IBM_PARAM(volume); IBM_PARAM(fan); -static void acpi_ibm_exit(void) -{ - int i; - - for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) - ibm_exit(&ibms[i]); - - if (proc_dir) - remove_proc_entry(IBM_DIR, acpi_root_dir); - - if (ibm_thinkpad_ec_found) - kfree(ibm_thinkpad_ec_found); -} - -static char* __init check_dmi_for_ec(void) -{ - struct dmi_device *dev = NULL; - char ec_fw_string[18]; - - /* - * ThinkPad T23 or newer, A31 or newer, R50e or newer, - * X32 or newer, all Z series; Some models must have an - * up-to-date BIOS or they will not be detected. - * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs - */ - while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { - if (sscanf(dev->name, - "IBM ThinkPad Embedded Controller -[%17c", - ec_fw_string) == 1) { - ec_fw_string[sizeof(ec_fw_string) - 1] = 0; - ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; - return kstrdup(ec_fw_string, GFP_KERNEL); - } - } - return NULL; -} - static int __init acpi_ibm_init(void) { int ret, i; @@ -2648,5 +2750,19 @@ static int __init acpi_ibm_init(void) return 0; } +static void acpi_ibm_exit(void) +{ + int i; + + for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) + ibm_exit(&ibms[i]); + + if (proc_dir) + remove_proc_entry(IBM_DIR, acpi_root_dir); + + if (ibm_thinkpad_ec_found) + kfree(ibm_thinkpad_ec_found); +} + module_init(acpi_ibm_init); module_exit(acpi_ibm_exit); -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 4/5] ACPI: ibm-acpi: update copyright notice @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Update copyright and license info on the source code comments. No functional changes. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- drivers/acpi/ibm_acpi.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 3158fc3..dd36be0 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -3,7 +3,7 @@ * * * Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net> - * Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br> + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,7 +17,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. */ #define IBM_VERSION "0.13" -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 4/5] ACPI: ibm-acpi: update copyright notice @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Update copyright and license info on the source code comments. No functional changes. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- drivers/acpi/ibm_acpi.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 3158fc3..dd36be0 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -3,7 +3,7 @@ * * * Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net> - * Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br> + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,7 +17,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. */ #define IBM_VERSION "0.13" -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 5/5] ACPI: ibm-acpi: update documentation @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Update documentation header, and relocate a hunk of text that was missplaced. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- Documentation/ibm-acpi.txt | 85 +++++++++++++------------------------------- 1 files changed, 25 insertions(+), 60 deletions(-) diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt index 0132d36..16f1c77 100644 --- a/Documentation/ibm-acpi.txt +++ b/Documentation/ibm-acpi.txt @@ -1,16 +1,17 @@ IBM ThinkPad ACPI Extras Driver - Version 0.12 - 17 August 2005 + Version 0.13 + 31 December 2006 Borislav Deianov <borislav@users.sf.net> + Henrique de Moraes Holschuh <hmh@hmh.eng.br> http://ibm-acpi.sf.net/ This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports various features of these laptops which are accessible through the -ACPI framework but not otherwise supported by the generic Linux ACPI -drivers. +ACPI framework but not otherwise fully supported by the generic Linux +ACPI drivers. Status @@ -638,6 +639,26 @@ The ThinkPad's ACPI DSDT code will reprogram the fan on its own when certain conditions are met. It will override any fan programming done through ibm-acpi. +The ibm-acpi kernel driver can be programmed to revert the fan level +to a safe setting if userspace does not issue one of the fan commands: +"enable", "disable", "level" or "watchdog" within a configurable +ammount of time. To do this, use the "watchdog" command. + + echo 'watchdog <interval>' > /proc/acpi/ibm/fan + +Interval is the ammount of time in seconds to wait for one of the +above mentioned fan commands before reseting the fan level to a safe +one. If set to zero, the watchdog is disabled (default). When the +watchdog timer runs out, it does the exact equivalent of the "enable" +fan command. + +Note that the watchdog timer stops after it enables the fan. It will +be rearmed again automatically (using the same interval) when one of +the above mentioned fan commands is received. The fan watchdog is, +therefore, not suitable to protect against fan mode changes made +through means other than the "enable", "disable", and "level" fan +commands. + EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan --------------------------------------- @@ -670,59 +691,3 @@ example: modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable -The ibm-acpi kernel driver can be programmed to revert the fan level -to a safe setting if userspace does not issue one of the fan commands: -"enable", "disable", "level" or "watchdog" within a configurable -ammount of time. To do this, use the "watchdog" command. - - echo 'watchdog <interval>' > /proc/acpi/ibm/fan - -Interval is the ammount of time in seconds to wait for one of the -above mentioned fan commands before reseting the fan level to a safe -one. If set to zero, the watchdog is disabled (default). When the -watchdog timer runs out, it does the exact equivalent of the "enable" -fan command. - -Note that the watchdog timer stops after it enables the fan. It will -be rearmed again automatically (using the same interval) when one of -the above mentioned fan commands is received. The fan watchdog is, -therefore, not suitable to protect against fan mode changes made -through means other than the "enable", "disable", and "level" fan -commands. - - -Example Configuration ---------------------- - -The ACPI support in the kernel is intended to be used in conjunction -with a user-space daemon, acpid. The configuration files for this -daemon control what actions are taken in response to various ACPI -events. An example set of configuration files are included in the -config/ directory of the tarball package available on the web -site. Note that these are provided for illustration purposes only and -may need to be adapted to your particular setup. - -The following utility scripts are used by the example action -scripts (included with ibm-acpi for completeness): - - /usr/local/sbin/idectl -- from the hdparm source distribution, - see http://www.ibiblio.org/pub/Linux/system/hardware - /usr/local/sbin/laptop_mode -- from the Linux kernel source - distribution, see Documentation/laptop-mode.txt - /sbin/service -- comes with Redhat/Fedora distributions - /usr/sbin/hibernate -- from the Software Suspend 2 distribution, - see http://softwaresuspend.berlios.de/ - -Toan T Nguyen <ntt@physics.ucla.edu> notes that Suse uses the -powersave program to suspend ('powersave --suspend-to-ram') or -hibernate ('powersave --suspend-to-disk'). This means that the -hibernate script is not needed on that distribution. - -Henrik Brix Andersen <brix@gentoo.org> has written a Gentoo ACPI event -handler script for the X31. You can get the latest version from -http://dev.gentoo.org/~brix/files/x31.sh - -David Schweikert <dws@ee.eth.ch> has written an alternative blank.sh -script which works on Debian systems. This scripts has now been -extended to also work on Fedora systems and included as the default -blank.sh in the distribution. -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 5/5] ACPI: ibm-acpi: update documentation @ 2007-02-24 15:01 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-02-24 15:01 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel, Henrique de Moraes Holschuh Update documentation header, and relocate a hunk of text that was missplaced. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> --- Documentation/ibm-acpi.txt | 85 +++++++++++++------------------------------- 1 files changed, 25 insertions(+), 60 deletions(-) diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt index 0132d36..16f1c77 100644 --- a/Documentation/ibm-acpi.txt +++ b/Documentation/ibm-acpi.txt @@ -1,16 +1,17 @@ IBM ThinkPad ACPI Extras Driver - Version 0.12 - 17 August 2005 + Version 0.13 + 31 December 2006 Borislav Deianov <borislav@users.sf.net> + Henrique de Moraes Holschuh <hmh@hmh.eng.br> http://ibm-acpi.sf.net/ This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports various features of these laptops which are accessible through the -ACPI framework but not otherwise supported by the generic Linux ACPI -drivers. +ACPI framework but not otherwise fully supported by the generic Linux +ACPI drivers. Status @@ -638,6 +639,26 @@ The ThinkPad's ACPI DSDT code will reprogram the fan on its own when certain conditions are met. It will override any fan programming done through ibm-acpi. +The ibm-acpi kernel driver can be programmed to revert the fan level +to a safe setting if userspace does not issue one of the fan commands: +"enable", "disable", "level" or "watchdog" within a configurable +ammount of time. To do this, use the "watchdog" command. + + echo 'watchdog <interval>' > /proc/acpi/ibm/fan + +Interval is the ammount of time in seconds to wait for one of the +above mentioned fan commands before reseting the fan level to a safe +one. If set to zero, the watchdog is disabled (default). When the +watchdog timer runs out, it does the exact equivalent of the "enable" +fan command. + +Note that the watchdog timer stops after it enables the fan. It will +be rearmed again automatically (using the same interval) when one of +the above mentioned fan commands is received. The fan watchdog is, +therefore, not suitable to protect against fan mode changes made +through means other than the "enable", "disable", and "level" fan +commands. + EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan --------------------------------------- @@ -670,59 +691,3 @@ example: modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable -The ibm-acpi kernel driver can be programmed to revert the fan level -to a safe setting if userspace does not issue one of the fan commands: -"enable", "disable", "level" or "watchdog" within a configurable -ammount of time. To do this, use the "watchdog" command. - - echo 'watchdog <interval>' > /proc/acpi/ibm/fan - -Interval is the ammount of time in seconds to wait for one of the -above mentioned fan commands before reseting the fan level to a safe -one. If set to zero, the watchdog is disabled (default). When the -watchdog timer runs out, it does the exact equivalent of the "enable" -fan command. - -Note that the watchdog timer stops after it enables the fan. It will -be rearmed again automatically (using the same interval) when one of -the above mentioned fan commands is received. The fan watchdog is, -therefore, not suitable to protect against fan mode changes made -through means other than the "enable", "disable", and "level" fan -commands. - - -Example Configuration ---------------------- - -The ACPI support in the kernel is intended to be used in conjunction -with a user-space daemon, acpid. The configuration files for this -daemon control what actions are taken in response to various ACPI -events. An example set of configuration files are included in the -config/ directory of the tarball package available on the web -site. Note that these are provided for illustration purposes only and -may need to be adapted to your particular setup. - -The following utility scripts are used by the example action -scripts (included with ibm-acpi for completeness): - - /usr/local/sbin/idectl -- from the hdparm source distribution, - see http://www.ibiblio.org/pub/Linux/system/hardware - /usr/local/sbin/laptop_mode -- from the Linux kernel source - distribution, see Documentation/laptop-mode.txt - /sbin/service -- comes with Redhat/Fedora distributions - /usr/sbin/hibernate -- from the Software Suspend 2 distribution, - see http://softwaresuspend.berlios.de/ - -Toan T Nguyen <ntt@physics.ucla.edu> notes that Suse uses the -powersave program to suspend ('powersave --suspend-to-ram') or -hibernate ('powersave --suspend-to-disk'). This means that the -hibernate script is not needed on that distribution. - -Henrik Brix Andersen <brix@gentoo.org> has written a Gentoo ACPI event -handler script for the X31. You can get the latest version from -http://dev.gentoo.org/~brix/files/x31.sh - -David Schweikert <dws@ee.eth.ch> has written an alternative blank.sh -script which works on Debian systems. This scripts has now been -extended to also work on Fedora systems and included as the default -blank.sh in the distribution. -- 1.5.0.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [GIT PULL] ibm-acpi: more updates 2007-02-24 15:01 [GIT PULL] ibm-acpi: more updates Henrique de Moraes Holschuh [not found] ` <11723292823837-git-send-email-hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> 2007-02-24 15:01 ` Henrique de Moraes Holschuh @ 2007-03-09 3:59 ` Len Brown [not found] ` <200703082259.55832.lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> 2 siblings, 1 reply; 15+ messages in thread From: Len Brown @ 2007-03-09 3:59 UTC (permalink / raw) To: Henrique de Moraes Holschuh; +Cc: linux-acpi, ibm-acpi-devel Henrique, If you could refresh this on to of the latest acpi-test, that would be great. (ibm-acpi changes in acpi-test are headed for 2.6.21). note also that you have some whitespace violations. Space in indent is followed by a tab. .dotest/patch:41: led * led_exp_hlbl[ind]); Space in indent is followed by a tab. .dotest/patch:46: led * led_exp_hlcl[ind]); probably the simplest way to stay on top of these is to maintain the driver as Lindent free upon every patch. eg. run Lindent after every patch to make sure it doesn't introduce any violations. you can also use git-apply --whitespace=strip thanks, -Len On Saturday 24 February 2007 10:01, Henrique de Moraes Holschuh wrote: > Len, > > Please pull from: > git://repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git > branch for-upstream/acpi-test > > to receive the following patches: > > Henrique de Moraes Holschuh (5): > ACPI: ibm-acpi: rename some identifiers > ACPI: ibm-acpi: add header file > ACPI: ibm-acpi: organize code > ACPI: ibm-acpi: update copyright notice > ACPI: ibm-acpi: update documentation > > It has a lot of code shuffling, which I did while cleaning up and preparing for > a sysfs conversion. It would be helpful to me if it is merged in acpi-test, as > that means it will be much faster for me to keep my working tree and what is in > acpi-test and mainline in sync. The rest are just minor doc updates. > > This patch set should not change any functionality. > > I just added the patches on top of what I had already sent you (and that you > have already merged). If you'd prefer it to be based on something else, just > say so. > > > - > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 15+ messages in thread
[parent not found: <200703082259.55832.lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]
* Re: [GIT PULL] ibm-acpi: more updates [not found] ` <200703082259.55832.lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> @ 2007-03-10 17:16 ` Henrique de Moraes Holschuh 2007-03-11 19:34 ` Len Brown 0 siblings, 1 reply; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-03-10 17:16 UTC (permalink / raw) To: Len Brown Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA, ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f On Thu, 08 Mar 2007, Len Brown wrote: > Henrique, > If you could refresh this on to of the latest acpi-test, > that would be great. (ibm-acpi changes in acpi-test are > headed for 2.6.21). These are not 2.6.21 material, I don't want Linus goint postal on either of us :-) Please tell me when you open the merge window for acpi-test targeting 2.6.22, and I will rediff and resubmit them. > note also that you have some whitespace violations. > Space in indent is followed by a tab. > .dotest/patch:41: led * led_exp_hlbl[ind]); > Space in indent is followed by a tab. > .dotest/patch:46: led * led_exp_hlcl[ind]); > > probably the simplest way to stay on top of these is > to maintain the driver as Lindent free upon every patch. > eg. run Lindent after every patch to make sure it doesn't > introduce any violations. > > you can also use git-apply --whitespace=strip Will do, thanks. -- "One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL] ibm-acpi: more updates 2007-03-10 17:16 ` Henrique de Moraes Holschuh @ 2007-03-11 19:34 ` Len Brown 2007-03-12 1:26 ` Henrique de Moraes Holschuh 0 siblings, 1 reply; 15+ messages in thread From: Len Brown @ 2007-03-11 19:34 UTC (permalink / raw) To: Henrique de Moraes Holschuh; +Cc: linux-acpi, ibm-acpi-devel On Saturday 10 March 2007 12:16, Henrique de Moraes Holschuh wrote: > On Thu, 08 Mar 2007, Len Brown wrote: > > Henrique, > > If you could refresh this on to of the latest acpi-test, > > that would be great. (ibm-acpi changes in acpi-test are > > headed for 2.6.21). > > These are not 2.6.21 material, I don't want Linus goint postal on either of > us :-) > > Please tell me when you open the merge window for acpi-test targeting > 2.6.22, and I will rediff and resubmit them. heh, the service window is always open at this restaurant:-) seriously, as I use topic branches, I'm happy to accept patches for future releases sooner than later and they will not get in the way of the current release. some of the topic branches I pull into "release" for linus, and additional ones I pull into "test" for andrew. the other day, for example, I sent out the contents of "release", which subsequently got pulled into 2.6.21-rc3-git6, and the additional contents of "test", which is the current queue for 2.6.22 -- or beyond if they prove not to be ready by then. thanks, -Len ps. ibm-acpi-devel@lists.sourceforge.net almost always bounces on me with a timeout. I think sourceforge as an e-mail list host is disfunctional (which is why we moved linux-acpi a while back) ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL] ibm-acpi: more updates 2007-03-11 19:34 ` Len Brown @ 2007-03-12 1:26 ` Henrique de Moraes Holschuh 0 siblings, 0 replies; 15+ messages in thread From: Henrique de Moraes Holschuh @ 2007-03-12 1:26 UTC (permalink / raw) To: Len Brown; +Cc: linux-acpi, ibm-acpi-devel On Sun, 11 Mar 2007, Len Brown wrote: > heh, the service window is always open at this restaurant:-) Nice :-) > seriously, as I use topic branches, I'm happy to accept patches > for future releases sooner than later and they will not get > in the way of the current release. Ok. I will make sure to mention which release I am targetting for, anyway. > ps. ibm-acpi-devel@lists.sourceforge.net almost always bounces > on me with a timeout. I think sourceforge as an e-mail > list host is disfunctional (which is why we moved linux-acpi > a while back) Well, I don't know if ibm-acpi-devel is the kind of stuff that would be accepted in vger :( But yes, sf.net mail handling leaves *much* to be desired. -- "One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2007-03-12 1:26 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-24 15:01 [GIT PULL] ibm-acpi: more updates Henrique de Moraes Holschuh
[not found] ` <11723292823837-git-send-email-hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org>
2007-02-24 15:01 ` [PATCH 1/5] ACPI: ibm-acpi: rename some identifiers Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-02-24 15:01 ` [PATCH 2/5] ACPI: ibm-acpi: add header file Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-02-24 15:01 ` [PATCH 3/5] ACPI: ibm-acpi: organize code Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-02-24 15:01 ` [PATCH 4/5] ACPI: ibm-acpi: update copyright notice Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-02-24 15:01 ` [PATCH 5/5] ACPI: ibm-acpi: update documentation Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-02-24 15:01 ` [PATCH 1/5] ACPI: ibm-acpi: rename some identifiers Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-02-24 15:01 ` [PATCH 2/5] ACPI: ibm-acpi: add header file Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-02-24 15:01 ` [PATCH 3/5] ACPI: ibm-acpi: organize code Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-02-24 15:01 ` [PATCH 4/5] ACPI: ibm-acpi: update copyright notice Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-02-24 15:01 ` [PATCH 5/5] ACPI: ibm-acpi: update documentation Henrique de Moraes Holschuh
2007-02-24 15:01 ` Henrique de Moraes Holschuh
2007-03-09 3:59 ` [GIT PULL] ibm-acpi: more updates Len Brown
[not found] ` <200703082259.55832.lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2007-03-10 17:16 ` Henrique de Moraes Holschuh
2007-03-11 19:34 ` Len Brown
2007-03-12 1:26 ` Henrique de Moraes Holschuh
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.