From: Vitaly Bordug <vitb@kernel.crashing.org>
To: linux-pcmcia@lists.infradead.org
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] [POWERPC] dts: kill hardcoded phandles
Date: Tue, 08 May 2007 13:50:49 +0400 [thread overview]
Message-ID: <20070508095049.20018.56908.stgit@localhost.localdomain> (raw)
In-Reply-To: <20070508095001.20018.85403.stgit@localhost.localdomain>
Removed explicit linux,phandle usage. Using references and labels now in
PQ and PQ2 boards currently supported in arch/powerpc.
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
---
arch/powerpc/boot/dts/mpc8272ads.dts | 42 +++++++++++---------------------
arch/powerpc/boot/dts/mpc866ads.dts | 31 ++++++++---------------
arch/powerpc/boot/dts/mpc885ads.dts | 45 +++++++++++++---------------------
3 files changed, 43 insertions(+), 75 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 423eedc..1934b80 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -14,12 +14,10 @@
compatible = "MPC8260ADS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8272@0 {
device_type = "cpu";
@@ -32,12 +30,10 @@
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
- linux,phandle = <201>;
};
};
- interrupt-controller@f8200000 {
- linux,phandle = <f8200000>;
+ pci_pic: interrupt-controller@f8200000 {
#address-cells = <0>;
#interrupt-cells = <2>;
interrupt-controller;
@@ -47,15 +43,13 @@
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 4000000 f4500000 00000020>;
};
chosen {
name = "chosen";
linux,platform = <0>;
- interrupt-controller = <10c00>;
- linux,phandle = <400>;
+ interrupt-controller = <&Cpm_pic>;
};
soc8272@f0000000 {
@@ -70,20 +64,17 @@
device_type = "mdio";
compatible = "fs_enet";
reg = <0 0>;
- linux,phandle = <24520>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <10c00>;
+ phy0:ethernet-phy@0 {
+ interrupt-parent = <&Cpm_pic>;
interrupts = <17 4>;
reg = <0>;
bitbang = [ 12 12 13 02 02 01 ];
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <10c00>;
+ phy1:ethernet-phy@1 {
+ interrupt-parent = <&Cpm_pic>;
interrupts = <17 4>;
bitbang = [ 12 12 13 02 02 01 ];
reg = <3>;
@@ -101,8 +92,8 @@
reg = <11300 20 8400 100 11380 30>;
mac-address = [ 00 11 2F 99 43 54 ];
interrupts = <20 2>;
- interrupt-parent = <10c00>;
- phy-handle = <2452000>;
+ interrupt-parent = <&Cpm_pic>;
+ phy-handle = <&Phy0>;
rx-clock = <13>;
tx-clock = <12>;
};
@@ -115,14 +106,13 @@
reg = <11320 20 8500 100 113b0 30>;
mac-address = [ 00 11 2F 99 44 54 ];
interrupts = <21 2>;
- interrupt-parent = <10c00>;
- phy-handle = <2452001>;
+ interrupt-parent = <&Cpm_pic>;
+ phy-handle = <&Phy1>;
rx-clock = <17>;
tx-clock = <18>;
};
cpm@f0000000 {
- linux,phandle = <f0000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
@@ -142,7 +132,7 @@
reg = <11a00 20 8000 100>;
current-speed = <1c200>;
interrupts = <28 2>;
- interrupt-parent = <10c00>;
+ interrupt-parent = <&Cpm_pic>;
clock-setup = <0 00ffffff>;
rx-clock = <1>;
tx-clock = <1>;
@@ -156,15 +146,14 @@
reg = <11a60 20 8300 100>;
current-speed = <1c200>;
interrupts = <2b 2>;
- interrupt-parent = <10c00>;
+ interrupt-parent = <&Cpm_pic>;
clock-setup = <1b ffffff00>;
rx-clock = <4>;
tx-clock = <4>;
};
};
- interrupt-controller@10c00 {
- linux,phandle = <10c00>;
+ cpm_pic:interrupt-controller@10c00 {
#address-cells = <0>;
#interrupt-cells = <2>;
interrupt-controller;
@@ -174,7 +163,6 @@
compatible = "CPM2";
};
pci@0500 {
- linux,phandle = <0500>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -202,7 +190,7 @@
c000 0 0 2 f8200000 43 8
c000 0 0 3 f8200000 40 8
c000 0 0 4 f8200000 41 8>;
- interrupt-parent = <10c00>;
+ interrupt-parent = <&Cpm_pic>;
interrupts = <14 8>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 40000000
@@ -216,7 +204,7 @@
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 2>;
- interrupt-parent = <10c00>;
+ interrupt-parent = <&Cpm_pic>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index c0d06fd..e5e7726 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -15,12 +15,10 @@
compatible = "mpc8xx";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,866@0 {
device_type = "cpu";
@@ -34,14 +32,12 @@
clock-frequency = <0>;
32-bit;
interrupts = <f 2>; // decrementer interrupt
- interrupt-parent = <ff000000>;
- linux,phandle = <201>;
+ interrupt-parent = <&Mpc8xx_pic>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 800000>;
};
@@ -57,11 +53,9 @@
device_type = "mdio";
compatible = "fs_enet";
reg = <e80 8>;
- linux,phandle = <e80>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet-phy@f {
- linux,phandle = <e800f>;
+ phy: ethernet-phy@f {
reg = <f>;
device_type = "ethernet-phy";
};
@@ -75,12 +69,11 @@
reg = <e00 188>;
mac-address = [ 00 00 0C 00 01 FD ];
interrupts = <3 1>;
- interrupt-parent = <ff000000>;
- phy-handle = <e800f>;
+ interrupt-parent = <&Mpc8xx_pic>;
+ phy-handle = <&Phy>;
};
- pic@ff000000 {
- linux,phandle = <ff000000>;
+ mpc8xx_pic: pic@ff000000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -91,7 +84,6 @@
};
cpm@ff000000 {
- linux,phandle = <ff000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
@@ -102,15 +94,14 @@
command-proc = <9c0>;
brg-frequency = <0>;
interrupts = <0 2>; // cpm error interrupt
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
- pic@930 {
- linux,phandle = <930>;
+ cpm_pic: pic@930 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <5 2 0 2>;
- interrupt-parent = <ff000000>;
+ interrupt-parent = <&Mpc8xx_pic>;
reg = <930 20>;
built-in;
device_type = "cpm-pic";
@@ -128,7 +119,7 @@
tx-clock = <1>;
current-speed = <0>;
interrupts = <4 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
smc@a90 {
@@ -142,7 +133,7 @@
tx-clock = <2>;
current-speed = <0>;
interrupts = <3 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
scc@a00 {
@@ -153,7 +144,7 @@
reg = <a00 18 3c00 80>;
mac-address = [ 00 00 0C 00 03 FD ];
interrupts = <1e 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 0786ac1..2b2fec8 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -15,12 +15,10 @@
compatible = "mpc8xx";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,885@0 {
device_type = "cpu";
@@ -34,14 +32,12 @@
clock-frequency = <0>;
32-bit;
interrupts = <f 2>; // decrementer interrupt
- interrupt-parent = <ff000000>;
- linux,phandle = <201>;
+ interrupt-parent = <&Mpc8xx_pic>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 800000>;
};
@@ -57,21 +53,17 @@
device_type = "mdio";
compatible = "fs_enet";
reg = <e80 8>;
- linux,phandle = <e80>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet-phy@0 {
- linux,phandle = <e8000>;
+ Phy0: ethernet-phy@0 {
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <e8001>;
+ Phy1: ethernet-phy@1 {
reg = <1>;
device_type = "ethernet-phy";
};
- ethernet-phy@2 {
- linux,phandle = <e8002>;
+ Phy2: ethernet-phy@2 {
reg = <2>;
device_type = "ethernet-phy";
};
@@ -85,8 +77,8 @@
reg = <e00 188>;
mac-address = [ 00 00 0C 00 01 FD ];
interrupts = <3 1>;
- interrupt-parent = <ff000000>;
- phy-handle = <e8000>;
+ interrupt-parent = <&Mpc8xx_pic>;
+ phy-handle = <&Phy1>;
};
fec@1e00 {
@@ -97,12 +89,11 @@
reg = <1e00 188>;
mac-address = [ 00 00 0C 00 02 FD ];
interrupts = <7 1>;
- interrupt-parent = <ff000000>;
- phy-handle = <e8001>;
+ interrupt-parent = <&Mpc8xx_pic>;
+ phy-handle = <&Phy2>;
};
- pic@ff000000 {
- linux,phandle = <ff000000>;
+ Mpc8xx_pic: pic@ff000000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -120,12 +111,11 @@
device_type = "pcmcia";
reg = <80 80>;
clock-frequency = <2faf080>;
- interrupt-parent = <&mpc8xx-pic>;
+ interrupt-parent = <&Mpc8xx_pic>;
interrupts = <d 1>;
};
cpm@ff000000 {
- linux,phandle = <ff000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
@@ -136,15 +126,14 @@
command-proc = <9c0>;
brg-frequency = <0>;
interrupts = <0 2>; // cpm error interrupt
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
- pic@930 {
- linux,phandle = <930>;
+ Cpm_pic: pic@930 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <5 2 0 2>;
- interrupt-parent = <ff000000>;
+ interrupt-parent = <&Mpc8xx_pic>;
reg = <930 20>;
built-in;
device_type = "cpm-pic";
@@ -162,7 +151,7 @@
tx-clock = <1>;
current-speed = <0>;
interrupts = <4 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
smc@a90 {
@@ -176,7 +165,7 @@
tx-clock = <2>;
current-speed = <0>;
interrupts = <3 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
scc@a40 {
@@ -187,8 +176,8 @@
reg = <a40 18 3e00 80>;
mac-address = [ 00 00 0C 00 03 FD ];
interrupts = <1c 3>;
- interrupt-parent = <930>;
- phy-handle = <e8002>;
+ interrupt-parent = <&Cpm_pic>;
+ phy-handle = <&Phy2>;
};
};
};
WARNING: multiple messages have this Message-ID (diff)
From: Vitaly Bordug <vitb@kernel.crashing.org>
To: linux-pcmcia@lists.infradead.org
Cc: linuxppc-dev@ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 3/3] [POWERPC] dts: kill hardcoded phandles
Date: Tue, 08 May 2007 13:50:49 +0400 [thread overview]
Message-ID: <20070508095049.20018.56908.stgit@localhost.localdomain> (raw)
In-Reply-To: <20070508095001.20018.85403.stgit@localhost.localdomain>
Removed explicit linux,phandle usage. Using references and labels now in
PQ and PQ2 boards currently supported in arch/powerpc.
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
---
arch/powerpc/boot/dts/mpc8272ads.dts | 42 +++++++++++---------------------
arch/powerpc/boot/dts/mpc866ads.dts | 31 ++++++++---------------
arch/powerpc/boot/dts/mpc885ads.dts | 45 +++++++++++++---------------------
3 files changed, 43 insertions(+), 75 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 423eedc..1934b80 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -14,12 +14,10 @@
compatible = "MPC8260ADS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8272@0 {
device_type = "cpu";
@@ -32,12 +30,10 @@
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
- linux,phandle = <201>;
};
};
- interrupt-controller@f8200000 {
- linux,phandle = <f8200000>;
+ pci_pic: interrupt-controller@f8200000 {
#address-cells = <0>;
#interrupt-cells = <2>;
interrupt-controller;
@@ -47,15 +43,13 @@
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 4000000 f4500000 00000020>;
};
chosen {
name = "chosen";
linux,platform = <0>;
- interrupt-controller = <10c00>;
- linux,phandle = <400>;
+ interrupt-controller = <&Cpm_pic>;
};
soc8272@f0000000 {
@@ -70,20 +64,17 @@
device_type = "mdio";
compatible = "fs_enet";
reg = <0 0>;
- linux,phandle = <24520>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <10c00>;
+ phy0:ethernet-phy@0 {
+ interrupt-parent = <&Cpm_pic>;
interrupts = <17 4>;
reg = <0>;
bitbang = [ 12 12 13 02 02 01 ];
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <10c00>;
+ phy1:ethernet-phy@1 {
+ interrupt-parent = <&Cpm_pic>;
interrupts = <17 4>;
bitbang = [ 12 12 13 02 02 01 ];
reg = <3>;
@@ -101,8 +92,8 @@
reg = <11300 20 8400 100 11380 30>;
mac-address = [ 00 11 2F 99 43 54 ];
interrupts = <20 2>;
- interrupt-parent = <10c00>;
- phy-handle = <2452000>;
+ interrupt-parent = <&Cpm_pic>;
+ phy-handle = <&Phy0>;
rx-clock = <13>;
tx-clock = <12>;
};
@@ -115,14 +106,13 @@
reg = <11320 20 8500 100 113b0 30>;
mac-address = [ 00 11 2F 99 44 54 ];
interrupts = <21 2>;
- interrupt-parent = <10c00>;
- phy-handle = <2452001>;
+ interrupt-parent = <&Cpm_pic>;
+ phy-handle = <&Phy1>;
rx-clock = <17>;
tx-clock = <18>;
};
cpm@f0000000 {
- linux,phandle = <f0000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
@@ -142,7 +132,7 @@
reg = <11a00 20 8000 100>;
current-speed = <1c200>;
interrupts = <28 2>;
- interrupt-parent = <10c00>;
+ interrupt-parent = <&Cpm_pic>;
clock-setup = <0 00ffffff>;
rx-clock = <1>;
tx-clock = <1>;
@@ -156,15 +146,14 @@
reg = <11a60 20 8300 100>;
current-speed = <1c200>;
interrupts = <2b 2>;
- interrupt-parent = <10c00>;
+ interrupt-parent = <&Cpm_pic>;
clock-setup = <1b ffffff00>;
rx-clock = <4>;
tx-clock = <4>;
};
};
- interrupt-controller@10c00 {
- linux,phandle = <10c00>;
+ cpm_pic:interrupt-controller@10c00 {
#address-cells = <0>;
#interrupt-cells = <2>;
interrupt-controller;
@@ -174,7 +163,6 @@
compatible = "CPM2";
};
pci@0500 {
- linux,phandle = <0500>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -202,7 +190,7 @@
c000 0 0 2 f8200000 43 8
c000 0 0 3 f8200000 40 8
c000 0 0 4 f8200000 41 8>;
- interrupt-parent = <10c00>;
+ interrupt-parent = <&Cpm_pic>;
interrupts = <14 8>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 40000000
@@ -216,7 +204,7 @@
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 2>;
- interrupt-parent = <10c00>;
+ interrupt-parent = <&Cpm_pic>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index c0d06fd..e5e7726 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -15,12 +15,10 @@
compatible = "mpc8xx";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,866@0 {
device_type = "cpu";
@@ -34,14 +32,12 @@
clock-frequency = <0>;
32-bit;
interrupts = <f 2>; // decrementer interrupt
- interrupt-parent = <ff000000>;
- linux,phandle = <201>;
+ interrupt-parent = <&Mpc8xx_pic>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 800000>;
};
@@ -57,11 +53,9 @@
device_type = "mdio";
compatible = "fs_enet";
reg = <e80 8>;
- linux,phandle = <e80>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet-phy@f {
- linux,phandle = <e800f>;
+ phy: ethernet-phy@f {
reg = <f>;
device_type = "ethernet-phy";
};
@@ -75,12 +69,11 @@
reg = <e00 188>;
mac-address = [ 00 00 0C 00 01 FD ];
interrupts = <3 1>;
- interrupt-parent = <ff000000>;
- phy-handle = <e800f>;
+ interrupt-parent = <&Mpc8xx_pic>;
+ phy-handle = <&Phy>;
};
- pic@ff000000 {
- linux,phandle = <ff000000>;
+ mpc8xx_pic: pic@ff000000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -91,7 +84,6 @@
};
cpm@ff000000 {
- linux,phandle = <ff000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
@@ -102,15 +94,14 @@
command-proc = <9c0>;
brg-frequency = <0>;
interrupts = <0 2>; // cpm error interrupt
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
- pic@930 {
- linux,phandle = <930>;
+ cpm_pic: pic@930 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <5 2 0 2>;
- interrupt-parent = <ff000000>;
+ interrupt-parent = <&Mpc8xx_pic>;
reg = <930 20>;
built-in;
device_type = "cpm-pic";
@@ -128,7 +119,7 @@
tx-clock = <1>;
current-speed = <0>;
interrupts = <4 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
smc@a90 {
@@ -142,7 +133,7 @@
tx-clock = <2>;
current-speed = <0>;
interrupts = <3 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
scc@a00 {
@@ -153,7 +144,7 @@
reg = <a00 18 3c00 80>;
mac-address = [ 00 00 0C 00 03 FD ];
interrupts = <1e 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 0786ac1..2b2fec8 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -15,12 +15,10 @@
compatible = "mpc8xx";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,885@0 {
device_type = "cpu";
@@ -34,14 +32,12 @@
clock-frequency = <0>;
32-bit;
interrupts = <f 2>; // decrementer interrupt
- interrupt-parent = <ff000000>;
- linux,phandle = <201>;
+ interrupt-parent = <&Mpc8xx_pic>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 800000>;
};
@@ -57,21 +53,17 @@
device_type = "mdio";
compatible = "fs_enet";
reg = <e80 8>;
- linux,phandle = <e80>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet-phy@0 {
- linux,phandle = <e8000>;
+ Phy0: ethernet-phy@0 {
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <e8001>;
+ Phy1: ethernet-phy@1 {
reg = <1>;
device_type = "ethernet-phy";
};
- ethernet-phy@2 {
- linux,phandle = <e8002>;
+ Phy2: ethernet-phy@2 {
reg = <2>;
device_type = "ethernet-phy";
};
@@ -85,8 +77,8 @@
reg = <e00 188>;
mac-address = [ 00 00 0C 00 01 FD ];
interrupts = <3 1>;
- interrupt-parent = <ff000000>;
- phy-handle = <e8000>;
+ interrupt-parent = <&Mpc8xx_pic>;
+ phy-handle = <&Phy1>;
};
fec@1e00 {
@@ -97,12 +89,11 @@
reg = <1e00 188>;
mac-address = [ 00 00 0C 00 02 FD ];
interrupts = <7 1>;
- interrupt-parent = <ff000000>;
- phy-handle = <e8001>;
+ interrupt-parent = <&Mpc8xx_pic>;
+ phy-handle = <&Phy2>;
};
- pic@ff000000 {
- linux,phandle = <ff000000>;
+ Mpc8xx_pic: pic@ff000000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -120,12 +111,11 @@
device_type = "pcmcia";
reg = <80 80>;
clock-frequency = <2faf080>;
- interrupt-parent = <&mpc8xx-pic>;
+ interrupt-parent = <&Mpc8xx_pic>;
interrupts = <d 1>;
};
cpm@ff000000 {
- linux,phandle = <ff000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
@@ -136,15 +126,14 @@
command-proc = <9c0>;
brg-frequency = <0>;
interrupts = <0 2>; // cpm error interrupt
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
- pic@930 {
- linux,phandle = <930>;
+ Cpm_pic: pic@930 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <5 2 0 2>;
- interrupt-parent = <ff000000>;
+ interrupt-parent = <&Mpc8xx_pic>;
reg = <930 20>;
built-in;
device_type = "cpm-pic";
@@ -162,7 +151,7 @@
tx-clock = <1>;
current-speed = <0>;
interrupts = <4 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
smc@a90 {
@@ -176,7 +165,7 @@
tx-clock = <2>;
current-speed = <0>;
interrupts = <3 3>;
- interrupt-parent = <930>;
+ interrupt-parent = <&Cpm_pic>;
};
scc@a40 {
@@ -187,8 +176,8 @@
reg = <a40 18 3e00 80>;
mac-address = [ 00 00 0C 00 03 FD ];
interrupts = <1c 3>;
- interrupt-parent = <930>;
- phy-handle = <e8002>;
+ interrupt-parent = <&Cpm_pic>;
+ phy-handle = <&Phy2>;
};
};
};
next prev parent reply other threads:[~2007-05-08 9:51 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-08 9:50 [PATCH 0/3] 8xx PCMCIA stuff && cleanup: take 3 Vitaly Bordug
2007-05-08 9:50 ` Vitaly Bordug
2007-05-08 9:50 ` [PATCH 1/3] [POWERPC] 8xx: mpc885ads pcmcia support Vitaly Bordug
2007-05-08 9:50 ` Vitaly Bordug
2007-05-08 14:04 ` Kumar Gala
2007-05-08 14:04 ` Kumar Gala
2007-05-08 17:31 ` Vitaly Bordug
2007-05-08 17:31 ` Vitaly Bordug
2007-05-08 21:19 ` Vitaly Bordug
2007-05-08 21:19 ` Vitaly Bordug
2007-05-08 9:50 ` [PATCH 2/3] [POWERPC] 8xx: fix whitespace and indentation Vitaly Bordug
2007-05-08 9:50 ` Vitaly Bordug
2007-05-08 9:50 ` Vitaly Bordug [this message]
2007-05-08 9:50 ` [PATCH 3/3] [POWERPC] dts: kill hardcoded phandles Vitaly Bordug
-- strict thread matches above, loose matches on Subject: below --
2007-05-08 22:31 [PATCH 0/3] 8xx PCMCIA stuff && cleanup: take 4 Vitaly Bordug
2007-05-08 22:31 ` [PATCH 3/3] [POWERPC] dts: kill hardcoded phandles Vitaly Bordug
2007-05-08 22:31 ` Vitaly Bordug
[not found] <20070508053049.18428.50622.stgit@localhost.localdomain>
2007-05-08 5:48 ` Vitaly Bordug
2007-05-08 5:48 ` Vitaly Bordug
2007-05-08 5:54 ` David Gibson
2007-05-08 5:54 ` David Gibson
2007-05-08 14:29 ` Loeliger Jon-LOELIGER
2007-05-08 14:29 ` Loeliger Jon-LOELIGER
2007-05-08 16:26 ` Vitaly Bordug
2007-05-08 16:26 ` Vitaly Bordug
2007-05-08 23:31 ` David Gibson
2007-05-08 23:31 ` David Gibson
2007-05-08 23:30 ` David Gibson
2007-05-08 23:30 ` David Gibson
2007-05-08 0:36 [PATCH 1/3] [POWERPC] 8xx: mpc885ads pcmcia support Vitaly Bordug
2007-05-08 0:50 ` [PATCH 3/3] [POWERPC] dts: kill hardcoded phandles Vitaly Bordug
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070508095049.20018.56908.stgit@localhost.localdomain \
--to=vitb@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pcmcia@lists.infradead.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.