[patch 00/15] s390 patches for 2.6.22

All of lore.kernel.org
 help / color / mirror / Atom feed

* [patch 00/15] s390 patches for 2.6.22
@ 2007-05-10 13:51 Martin Schwidefsky
  2007-05-10 13:51 ` [patch 01/15] fix subsystem removal fallout Martin Schwidefsky
                   ` (14 more replies)
  0 siblings, 15 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:51 UTC (permalink / raw)
  To: linux-kernel, linux-s390

A few fixes, some compiler warnings and the Kconfig cleanup.
s390 now uses the common drivers/Kconfig file instead of the
home-brewn drivers/s390/Kconfig. There are some more config
options for s390 now, not all of them make sense but as long
as the code compiles no harm is done.

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 01/15] fix subsystem removal fallout
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
@ 2007-05-10 13:51 ` Martin Schwidefsky
  2007-05-10 13:51 ` [patch 02/15] cio: Get rid of _ccw_device_get_device_number() Martin Schwidefsky
                   ` (13 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:51 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Cornelia Huck, Martin Schwidefsky

[-- Attachment #1: 001-kset.diff --]
[-- Type: text/plain, Size: 4435 bytes --]

From: Cornelia Huck <cornelia.huck@de.ibm.com>

This patch fixes compilation on s390 after the removal of
struct subsystem.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 arch/s390/hypfs/inode.c |    2 +-
 arch/s390/kernel/ipl.c  |   26 +++++++++++++-------------
 2 files changed, 14 insertions(+), 14 deletions(-)

Index: quilt-2.6/arch/s390/hypfs/inode.c
===================================================================
--- quilt-2.6.orig/arch/s390/hypfs/inode.c
+++ quilt-2.6/arch/s390/hypfs/inode.c
@@ -477,7 +477,7 @@ static int __init hypfs_init(void)
 			goto fail_diag;
 		}
 	}
-	kset_set_kset_s(&s390_subsys, hypervisor_subsys);
+	kobj_set_kset_s(&s390_subsys, hypervisor_subsys);
 	rc = subsystem_register(&s390_subsys);
 	if (rc)
 		goto fail_sysfs;
Index: quilt-2.6/arch/s390/kernel/ipl.c
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/ipl.c
+++ quilt-2.6/arch/s390/kernel/ipl.c
@@ -816,23 +816,23 @@ static int __init ipl_register_fcp_files
 {
 	int rc;
 
-	rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+	rc = sysfs_create_group(&ipl_subsys.kobj,
 				&ipl_fcp_attr_group);
 	if (rc)
 		goto out;
-	rc = sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+	rc = sysfs_create_bin_file(&ipl_subsys.kobj,
 				   &ipl_parameter_attr);
 	if (rc)
 		goto out_ipl_parm;
-	rc = sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+	rc = sysfs_create_bin_file(&ipl_subsys.kobj,
 				   &ipl_scp_data_attr);
 	if (!rc)
 		goto out;
 
-	sysfs_remove_bin_file(&ipl_subsys.kset.kobj, &ipl_parameter_attr);
+	sysfs_remove_bin_file(&ipl_subsys.kobj, &ipl_parameter_attr);
 
 out_ipl_parm:
-	sysfs_remove_group(&ipl_subsys.kset.kobj, &ipl_fcp_attr_group);
+	sysfs_remove_group(&ipl_subsys.kobj, &ipl_fcp_attr_group);
 out:
 	return rc;
 }
@@ -846,7 +846,7 @@ static int __init ipl_init(void)
 		return rc;
 	switch (ipl_info.type) {
 	case IPL_TYPE_CCW:
-		rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+		rc = sysfs_create_group(&ipl_subsys.kobj,
 					&ipl_ccw_attr_group);
 		break;
 	case IPL_TYPE_FCP:
@@ -854,11 +854,11 @@ static int __init ipl_init(void)
 		rc = ipl_register_fcp_files();
 		break;
 	case IPL_TYPE_NSS:
-		rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+		rc = sysfs_create_group(&ipl_subsys.kobj,
 					&ipl_nss_attr_group);
 		break;
 	default:
-		rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+		rc = sysfs_create_group(&ipl_subsys.kobj,
 					&ipl_unknown_attr_group);
 		break;
 	}
@@ -885,7 +885,7 @@ static int __init reipl_nss_init(void)
 
 	if (!MACHINE_IS_VM)
 		return 0;
-	rc = sysfs_create_group(&reipl_subsys.kset.kobj, &reipl_nss_attr_group);
+	rc = sysfs_create_group(&reipl_subsys.kobj, &reipl_nss_attr_group);
 	if (rc)
 		return rc;
 	strncpy(reipl_nss_name, kernel_nss_name, NSS_NAME_SIZE + 1);
@@ -900,7 +900,7 @@ static int __init reipl_ccw_init(void)
 	reipl_block_ccw = (void *) get_zeroed_page(GFP_KERNEL);
 	if (!reipl_block_ccw)
 		return -ENOMEM;
-	rc = sysfs_create_group(&reipl_subsys.kset.kobj, &reipl_ccw_attr_group);
+	rc = sysfs_create_group(&reipl_subsys.kobj, &reipl_ccw_attr_group);
 	if (rc) {
 		free_page((unsigned long)reipl_block_ccw);
 		return rc;
@@ -938,7 +938,7 @@ static int __init reipl_fcp_init(void)
 	reipl_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
 	if (!reipl_block_fcp)
 		return -ENOMEM;
-	rc = sysfs_create_group(&reipl_subsys.kset.kobj, &reipl_fcp_attr_group);
+	rc = sysfs_create_group(&reipl_subsys.kobj, &reipl_fcp_attr_group);
 	if (rc) {
 		free_page((unsigned long)reipl_block_fcp);
 		return rc;
@@ -990,7 +990,7 @@ static int __init dump_ccw_init(void)
 	dump_block_ccw = (void *) get_zeroed_page(GFP_KERNEL);
 	if (!dump_block_ccw)
 		return -ENOMEM;
-	rc = sysfs_create_group(&dump_subsys.kset.kobj, &dump_ccw_attr_group);
+	rc = sysfs_create_group(&dump_subsys.kobj, &dump_ccw_attr_group);
 	if (rc) {
 		free_page((unsigned long)dump_block_ccw);
 		return rc;
@@ -1014,7 +1014,7 @@ static int __init dump_fcp_init(void)
 	dump_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
 	if (!dump_block_fcp)
 		return -ENOMEM;
-	rc = sysfs_create_group(&dump_subsys.kset.kobj, &dump_fcp_attr_group);
+	rc = sysfs_create_group(&dump_subsys.kobj, &dump_fcp_attr_group);
 	if (rc) {
 		free_page((unsigned long)dump_block_fcp);
 		return rc;

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 02/15] cio: Get rid of _ccw_device_get_device_number().
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
  2007-05-10 13:51 ` [patch 01/15] fix subsystem removal fallout Martin Schwidefsky
@ 2007-05-10 13:51 ` Martin Schwidefsky
  2007-05-10 13:51 ` [patch 03/15] cio: Make some structures and a function static Martin Schwidefsky
                   ` (12 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:51 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Cornelia Huck, Martin Schwidefsky

[-- Attachment #1: 002-cio-devid.diff --]
[-- Type: text/plain, Size: 5901 bytes --]

From: Cornelia Huck <cornelia.huck@de.ibm.com>

The function shouldn't have existed in the first place (not MSS-aware).
Introduce a new function ccw_device_get_id() that extracts the
ccw_dev_id structure of a ccw device and convert all users of
_ccw_device_get_device_number to ccw_device_get_id.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/s390/block/dasd_diag.c  |   10 ++++++----
 drivers/s390/block/dasd_ioctl.c |    4 +++-
 drivers/s390/char/raw3270.c     |    5 +++--
 drivers/s390/cio/device_ops.c   |   11 +++++++++++
 include/asm-s390/ccwdev.h       |    3 ++-
 5 files changed, 25 insertions(+), 8 deletions(-)

Index: quilt-2.6/drivers/s390/block/dasd_diag.c
===================================================================
--- quilt-2.6.orig/drivers/s390/block/dasd_diag.c
+++ quilt-2.6/drivers/s390/block/dasd_diag.c
@@ -50,6 +50,7 @@ struct dasd_diag_private {
 	struct dasd_diag_rw_io iob;
 	struct dasd_diag_init_io iib;
 	blocknum_t pt_block;
+	struct ccw_dev_id dev_id;
 };
 
 struct dasd_diag_req {
@@ -102,7 +103,7 @@ mdsk_init_io(struct dasd_device *device,
 	iib = &private->iib;
 	memset(iib, 0, sizeof (struct dasd_diag_init_io));
 
-	iib->dev_nr = _ccw_device_get_device_number(device->cdev);
+	iib->dev_nr = private->dev_id.devno;
 	iib->block_size = blocksize;
 	iib->offset = offset;
 	iib->flaga = DASD_DIAG_FLAGA_DEFAULT;
@@ -127,7 +128,7 @@ mdsk_term_io(struct dasd_device * device
 	private = (struct dasd_diag_private *) device->private;
 	iib = &private->iib;
 	memset(iib, 0, sizeof (struct dasd_diag_init_io));
-	iib->dev_nr = _ccw_device_get_device_number(device->cdev);
+	iib->dev_nr = private->dev_id.devno;
 	rc = dia250(iib, TERM_BIO);
 	return rc;
 }
@@ -166,7 +167,7 @@ dasd_start_diag(struct dasd_ccw_req * cq
 	private = (struct dasd_diag_private *) device->private;
 	dreq = (struct dasd_diag_req *) cqr->data;
 
-	private->iob.dev_nr = _ccw_device_get_device_number(device->cdev);
+	private->iob.dev_nr = private->dev_id.devno;
 	private->iob.key = 0;
 	private->iob.flags = DASD_DIAG_RWFLAG_ASYNC;
 	private->iob.block_count = dreq->block_count;
@@ -323,11 +324,12 @@ dasd_diag_check_device(struct dasd_devic
 				"memory allocation failed for private data");
 			return -ENOMEM;
 		}
+		ccw_device_get_id(device->cdev, &private->dev_id);
 		device->private = (void *) private;
 	}
 	/* Read Device Characteristics */
 	rdc_data = (void *) &(private->rdc_data);
-	rdc_data->dev_nr = _ccw_device_get_device_number(device->cdev);
+	rdc_data->dev_nr = private->dev_id.devno;
 	rdc_data->rdc_len = sizeof (struct dasd_diag_characteristics);
 
 	rc = diag210((struct diag210 *) rdc_data);
Index: quilt-2.6/drivers/s390/block/dasd_ioctl.c
===================================================================
--- quilt-2.6.orig/drivers/s390/block/dasd_ioctl.c
+++ quilt-2.6/drivers/s390/block/dasd_ioctl.c
@@ -255,6 +255,7 @@ dasd_ioctl_information(struct dasd_devic
 	unsigned long flags;
 	int rc;
 	struct ccw_device *cdev;
+	struct ccw_dev_id dev_id;
 
 	if (!device->discipline->fill_info)
 		return -EINVAL;
@@ -270,8 +271,9 @@ dasd_ioctl_information(struct dasd_devic
 	}
 
 	cdev = device->cdev;
+	ccw_device_get_id(cdev, &dev_id);
 
-	dasd_info->devno = _ccw_device_get_device_number(device->cdev);
+	dasd_info->devno = dev_id.devno;
 	dasd_info->schid = _ccw_device_get_subchannel_number(device->cdev);
 	dasd_info->cu_type = cdev->id.cu_type;
 	dasd_info->cu_model = cdev->id.cu_model;
Index: quilt-2.6/drivers/s390/char/raw3270.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/raw3270.c
+++ quilt-2.6/drivers/s390/char/raw3270.c
@@ -589,9 +589,10 @@ static int
 __raw3270_size_device_vm(struct raw3270 *rp)
 {
 	int rc, model;
+	struct ccw_dev_id dev_id;
 
-	raw3270_init_diag210.vrdcdvno = 
-		_ccw_device_get_device_number(rp->cdev);
+	ccw_device_get_id(rp->cdev, &dev_id);
+	raw3270_init_diag210.vrdcdvno = dev_id.devno;
 	raw3270_init_diag210.vrdclen = sizeof(struct diag210);
 	rc = diag210(&raw3270_init_diag210);
 	if (rc)
Index: quilt-2.6/drivers/s390/cio/device_ops.c
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/device_ops.c
+++ quilt-2.6/drivers/s390/cio/device_ops.c
@@ -616,6 +616,17 @@ ccw_device_get_chp_desc(struct ccw_devic
 	return chp_get_chp_desc(chpid);
 }
 
+/**
+ * ccw_device_get_id - obtain a ccw device id
+ * @cdev: device to obtain the id for
+ * @dev_id: where to fill in the values
+ */
+void ccw_device_get_id(struct ccw_device *cdev, struct ccw_dev_id *dev_id)
+{
+	*dev_id = cdev->private->dev_id;
+}
+EXPORT_SYMBOL(ccw_device_get_id);
+
 // FIXME: these have to go:
 
 int
Index: quilt-2.6/include/asm-s390/ccwdev.h
===================================================================
--- quilt-2.6.orig/include/asm-s390/ccwdev.h
+++ quilt-2.6/include/asm-s390/ccwdev.h
@@ -16,6 +16,7 @@
 /* structs from asm/cio.h */
 struct irb;
 struct ccw1;
+struct ccw_dev_id;
 
 /* simplified initializers for struct ccw_device:
  * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one
@@ -175,6 +176,7 @@ extern int ccw_device_set_offline(struct
 
 extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd);
 extern __u8 ccw_device_get_path_mask(struct ccw_device *);
+extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
 
 #define get_ccwdev_lock(x) (x)->ccwlock
 
@@ -184,7 +186,6 @@ extern __u8 ccw_device_get_path_mask(str
 extern struct ccw_device *ccw_device_probe_console(void);
 
 // FIXME: these have to go
-extern int _ccw_device_get_device_number(struct ccw_device *);
 extern int _ccw_device_get_subchannel_number(struct ccw_device *);
 
 extern void *ccw_device_get_chp_desc(struct ccw_device *, int);

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 03/15] cio: Make some structures and a function static.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
  2007-05-10 13:51 ` [patch 01/15] fix subsystem removal fallout Martin Schwidefsky
  2007-05-10 13:51 ` [patch 02/15] cio: Get rid of _ccw_device_get_device_number() Martin Schwidefsky
@ 2007-05-10 13:51 ` Martin Schwidefsky
  2007-05-10 13:51 ` [patch 04/15] monreader inlining cleanup Martin Schwidefsky
                   ` (11 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:51 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Cornelia Huck, Martin Schwidefsky

[-- Attachment #1: 003-cio-static.diff --]
[-- Type: text/plain, Size: 2209 bytes --]

From: Cornelia Huck <cornelia.huck@de.ibm.com>

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/s390/cio/css.c    |    3 +--
 drivers/s390/cio/css.h    |    2 --
 drivers/s390/cio/device.c |    4 ++--
 3 files changed, 3 insertions(+), 6 deletions(-)

Index: quilt-2.6/drivers/s390/cio/css.c
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/css.c
+++ quilt-2.6/drivers/s390/cio/css.c
@@ -191,8 +191,7 @@ static int css_register_subchannel(struc
 	return ret;
 }
 
-int
-css_probe_device(struct subchannel_id schid)
+static int css_probe_device(struct subchannel_id schid)
 {
 	int ret;
 	struct subchannel *sch;
Index: quilt-2.6/drivers/s390/cio/css.h
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/css.h
+++ quilt-2.6/drivers/s390/cio/css.h
@@ -138,9 +138,7 @@ struct css_driver {
  * all css_drivers have the css_bus_type
  */
 extern struct bus_type css_bus_type;
-extern struct css_driver io_subchannel_driver;
 
-extern int css_probe_device(struct subchannel_id);
 extern int css_sch_device_register(struct subchannel *);
 extern void css_sch_device_unregister(struct subchannel *);
 extern struct subchannel * get_subchannel_by_schid(struct subchannel_id);
Index: quilt-2.6/drivers/s390/cio/device.c
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/device.c
+++ quilt-2.6/drivers/s390/cio/device.c
@@ -129,7 +129,7 @@ static void io_subchannel_verify(struct 
 static void io_subchannel_ioterm(struct device *);
 static void io_subchannel_shutdown(struct subchannel *);
 
-struct css_driver io_subchannel_driver = {
+static struct css_driver io_subchannel_driver = {
 	.subchannel_type = SUBCHANNEL_TYPE_IO,
 	.drv = {
 		.name = "io_subchannel",
@@ -546,7 +546,7 @@ static struct attribute_group ccwdev_att
 	.attrs = ccwdev_attrs,
 };
 
-struct attribute_group *ccwdev_attr_groups[] = {
+static struct attribute_group *ccwdev_attr_groups[] = {
 	&ccwdev_attr_group,
 	NULL,
 };

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 04/15] monreader inlining cleanup.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (2 preceding siblings ...)
  2007-05-10 13:51 ` [patch 03/15] cio: Make some structures and a function static Martin Schwidefsky
@ 2007-05-10 13:51 ` Martin Schwidefsky
  2007-05-10 13:51 ` [patch 05/15] dasd: Fix modular build Martin Schwidefsky
                   ` (10 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:51 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Martin Schwidefsky

[-- Attachment #1: 004-inline.diff --]
[-- Type: text/plain, Size: 2116 bytes --]

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/s390/char/monreader.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Index: quilt-2.6/drivers/s390/char/monreader.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/monreader.c
+++ quilt-2.6/drivers/s390/char/monreader.c
@@ -97,7 +97,7 @@ static u8 user_data_sever[16] = {
  * Create the 8 bytes EBCDIC DCSS segment name from
  * an ASCII name, incl. padding
  */
-static inline void dcss_mkname(char *ascii_name, char *ebcdic_name)
+static void dcss_mkname(char *ascii_name, char *ebcdic_name)
 {
 	int i;
 
@@ -191,7 +191,7 @@ static inline u32 mon_rec_end(struct mon
 	return *((u32 *) (mon_mca_start(monmsg) + monmsg->mca_offset + 8));
 }
 
-static inline int mon_check_mca(struct mon_msg *monmsg)
+static int mon_check_mca(struct mon_msg *monmsg)
 {
 	if ((mon_rec_end(monmsg) <= mon_rec_start(monmsg)) ||
 	    (mon_rec_start(monmsg) < mon_dcss_start) ||
@@ -209,8 +209,8 @@ static inline int mon_check_mca(struct m
 	return 0;
 }
 
-static inline int mon_send_reply(struct mon_msg *monmsg,
-				 struct mon_private *monpriv)
+static int mon_send_reply(struct mon_msg *monmsg,
+			  struct mon_private *monpriv)
 {
 	int rc;
 
@@ -236,7 +236,7 @@ static inline int mon_send_reply(struct 
 	return 0;
 }
 
-static inline void mon_free_mem(struct mon_private *monpriv)
+static void mon_free_mem(struct mon_private *monpriv)
 {
 	int i;
 
@@ -246,7 +246,7 @@ static inline void mon_free_mem(struct m
 	kfree(monpriv);
 }
 
-static inline struct mon_private *mon_alloc_mem(void)
+static struct mon_private *mon_alloc_mem(void)
 {
 	int i;
 	struct mon_private *monpriv;
@@ -307,7 +307,7 @@ static inline void mon_next_mca(struct m
 	monmsg->pos = 0;
 }
 
-static inline struct mon_msg *mon_next_message(struct mon_private *monpriv)
+static struct mon_msg *mon_next_message(struct mon_private *monpriv)
 {
 	struct mon_msg *monmsg;
 

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 05/15] dasd: Fix modular build.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (3 preceding siblings ...)
  2007-05-10 13:51 ` [patch 04/15] monreader inlining cleanup Martin Schwidefsky
@ 2007-05-10 13:51 ` Martin Schwidefsky
  2007-05-10 13:51 ` [patch 06/15] Avoid sparse warnings Martin Schwidefsky
                   ` (9 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:51 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Cornelia Huck, Martin Schwidefsky

[-- Attachment #1: 005-dasd-modular.diff --]
[-- Type: text/plain, Size: 770 bytes --]

From: Cornelia Huck <cornelia.huck@de.ibm.com>

Add missing export of dasd_generic_read_dev_chars().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/s390/block/dasd.c |    1 +
 1 file changed, 1 insertion(+)

Index: quilt-2.6/drivers/s390/block/dasd.c
===================================================================
--- quilt-2.6.orig/drivers/s390/block/dasd.c
+++ quilt-2.6/drivers/s390/block/dasd.c
@@ -2219,6 +2219,7 @@ int dasd_generic_read_dev_chars(struct d
 	dasd_sfree_request(cqr, cqr->device);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(dasd_generic_read_dev_chars);
 
 static int __init
 dasd_init(void)

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 06/15] Avoid sparse warnings.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (4 preceding siblings ...)
  2007-05-10 13:51 ` [patch 05/15] dasd: Fix modular build Martin Schwidefsky
@ 2007-05-10 13:51 ` Martin Schwidefsky
  2007-05-10 13:51 ` [patch 07/15] qdio: re-add lost perf_stats.tl_runs change in qdio_handle_pci Martin Schwidefsky
                   ` (8 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:51 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Heiko Carstens

[-- Attachment #1: 006-sparse.diff --]
[-- Type: text/plain, Size: 7116 bytes --]

From: Heiko Carstens <heiko.carstens@de.ibm.com>

Monthly sparse warning avoidance patch. Sigh.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---

 drivers/s390/block/dasd.c      |    7 ++++---
 drivers/s390/block/dasd_eckd.c |    6 +++---
 drivers/s390/char/sclp.h       |    3 +++
 drivers/s390/char/sclp_sdias.c |    8 ++++----
 drivers/s390/char/zcore.c      |    9 +++------
 drivers/s390/net/qeth_mpc.c    |    4 ++--
 drivers/s390/scsi/zfcp_aux.c   |    8 +++-----
 drivers/s390/scsi/zfcp_dbf.c   |    2 +-
 include/asm-s390/ipl.h         |    2 +-
 9 files changed, 24 insertions(+), 25 deletions(-)

Index: quilt-2.6/drivers/s390/block/dasd.c
===================================================================
--- quilt-2.6.orig/drivers/s390/block/dasd.c
+++ quilt-2.6/drivers/s390/block/dasd.c
@@ -2174,9 +2174,10 @@ dasd_generic_notify(struct ccw_device *c
 	return ret;
 }
 
-struct dasd_ccw_req * dasd_generic_build_rdc(struct dasd_device *device,
-					     void *rdc_buffer,
-					     int rdc_buffer_size, char *magic)
+static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
+						   void *rdc_buffer,
+						   int rdc_buffer_size,
+						   char *magic)
 {
 	struct dasd_ccw_req *cqr;
 	struct ccw1 *ccw;
Index: quilt-2.6/drivers/s390/block/dasd_eckd.c
===================================================================
--- quilt-2.6.orig/drivers/s390/block/dasd_eckd.c
+++ quilt-2.6/drivers/s390/block/dasd_eckd.c
@@ -450,9 +450,9 @@ dasd_eckd_generate_uid(struct dasd_devic
 	return 0;
 }
 
-struct dasd_ccw_req * dasd_eckd_build_rcd_lpm(struct dasd_device *device,
-					      void *rcd_buffer,
-					      struct ciw *ciw, __u8 lpm)
+static struct dasd_ccw_req *dasd_eckd_build_rcd_lpm(struct dasd_device *device,
+						    void *rcd_buffer,
+						    struct ciw *ciw, __u8 lpm)
 {
 	struct dasd_ccw_req *cqr;
 	struct ccw1 *ccw;
Index: quilt-2.6/drivers/s390/char/sclp.h
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp.h
+++ quilt-2.6/drivers/s390/char/sclp.h
@@ -132,6 +132,9 @@ int sclp_deactivate(void);
 int sclp_reactivate(void);
 int sclp_service_call(sclp_cmdw_t command, void *sccb);
 
+int sclp_sdias_init(void);
+void sclp_sdias_exit(void);
+
 /* useful inlines */
 
 /* VM uses EBCDIC 037, LPAR+native(SE+HMC) use EBCDIC 500 */
Index: quilt-2.6/drivers/s390/char/sclp_sdias.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/sclp_sdias.c
+++ quilt-2.6/drivers/s390/char/sclp_sdias.c
@@ -66,9 +66,9 @@ static DEFINE_MUTEX(sdias_mutex);
 
 static void sdias_callback(struct sclp_req *request, void *data)
 {
-	struct sdias_sccb *sccb;
+	struct sdias_sccb *cbsccb;
 
-	sccb = (struct sdias_sccb *) request->sccb;
+	cbsccb = (struct sdias_sccb *) request->sccb;
 	sclp_req_done = 1;
 	wake_up(&sdias_wq); /* Inform caller, that request is complete */
 	TRACE("callback done\n");
@@ -229,7 +229,7 @@ out:
 	return rc;
 }
 
-int __init sdias_init(void)
+int __init sclp_sdias_init(void)
 {
 	int rc;
 
@@ -248,7 +248,7 @@ int __init sdias_init(void)
 	return 0;
 }
 
-void __exit sdias_exit(void)
+void __exit sclp_sdias_exit(void)
 {
 	debug_unregister(sdias_dbf);
 	sclp_unregister(&sclp_sdias_register);
Index: quilt-2.6/drivers/s390/char/zcore.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/zcore.c
+++ quilt-2.6/drivers/s390/char/zcore.c
@@ -21,6 +21,7 @@
 #include <asm/debug.h>
 #include <asm/processor.h>
 #include <asm/irqflags.h>
+#include "sclp.h"
 
 #define TRACE(x...) debug_sprintf_event(zcore_dbf, 1, x)
 #define MSG(x...) printk( KERN_ALERT x )
@@ -564,8 +565,6 @@ static void __init zcore_header_init(int
 	get_cpu_id(&hdr->cpu_id);
 }
 
-extern int sdias_init(void);
-
 static int __init zcore_init(void)
 {
 	unsigned char arch;
@@ -582,7 +581,7 @@ static int __init zcore_init(void)
 	TRACE("wwpn:   %llx\n", (unsigned long long) ipl_info.data.fcp.wwpn);
 	TRACE("lun:    %llx\n", (unsigned long long) ipl_info.data.fcp.lun);
 
-	rc = sdias_init();
+	rc = sclp_sdias_init();
 	if (rc)
 		goto fail;
 
@@ -634,12 +633,10 @@ fail:
 	return rc;
 }
 
-extern void sdias_exit(void);
-
 static void __exit zcore_exit(void)
 {
 	debug_unregister(zcore_dbf);
-	sdias_exit();
+	sclp_sdias_exit();
 	diag308(DIAG308_REL_HSA, NULL);
 }
 
Index: quilt-2.6/drivers/s390/net/qeth_mpc.c
===================================================================
--- quilt-2.6.orig/drivers/s390/net/qeth_mpc.c
+++ quilt-2.6/drivers/s390/net/qeth_mpc.c
@@ -162,7 +162,7 @@ struct ipa_rc_msg {
 	char *msg;
 };
 
-struct ipa_rc_msg qeth_ipa_rc_msg[] = {
+static struct ipa_rc_msg qeth_ipa_rc_msg[] = {
 	{IPA_RC_SUCCESS,		"success"},
 	{IPA_RC_NOTSUPP,		"Command not supported"},
 	{IPA_RC_IP_TABLE_FULL,		"Add Addr IP Table Full - ipv6"},
@@ -226,7 +226,7 @@ struct ipa_cmd_names {
 	char *name;
 };
 
-struct ipa_cmd_names qeth_ipa_cmd_names[] = {
+static struct ipa_cmd_names qeth_ipa_cmd_names[] = {
 	{IPA_CMD_STARTLAN,	"startlan"},
 	{IPA_CMD_STOPLAN,	"stoplan"},
 	{IPA_CMD_SETVMAC,	"setvmac"},
Index: quilt-2.6/drivers/s390/scsi/zfcp_aux.c
===================================================================
--- quilt-2.6.orig/drivers/s390/scsi/zfcp_aux.c
+++ quilt-2.6/drivers/s390/scsi/zfcp_aux.c
@@ -607,8 +607,7 @@ zfcp_sg_list_free(struct zfcp_sg_list *s
  * @sg_count: elements in array
  * Return: size of entire scatter-gather list
  */
-size_t
-zfcp_sg_size(struct scatterlist *sg, unsigned int sg_count)
+static size_t zfcp_sg_size(struct scatterlist *sg, unsigned int sg_count)
 {
 	unsigned int i;
 	struct scatterlist *p;
@@ -975,8 +974,7 @@ zfcp_free_low_mem_buffers(struct zfcp_ad
 		mempool_destroy(adapter->pool.data_gid_pn);
 }
 
-void
-zfcp_dummy_release(struct device *dev)
+static void zfcp_dummy_release(struct device *dev)
 {
 	return;
 }
@@ -1336,7 +1334,7 @@ zfcp_nameserver_enqueue(struct zfcp_adap
 
 #define ZFCP_LOG_AREA                   ZFCP_LOG_AREA_FC
 
-void
+static void
 zfcp_fsf_incoming_els_rscn(struct zfcp_adapter *adapter,
 			   struct fsf_status_read_buffer *status_buffer)
 {
Index: quilt-2.6/drivers/s390/scsi/zfcp_dbf.c
===================================================================
--- quilt-2.6.orig/drivers/s390/scsi/zfcp_dbf.c
+++ quilt-2.6/drivers/s390/scsi/zfcp_dbf.c
@@ -478,7 +478,7 @@ static struct debug_view zfcp_hba_dbf_vi
 	NULL
 };
 
-void
+static void
 _zfcp_san_dbf_event_common_ct(const char *tag, struct zfcp_fsf_req *fsf_req,
 			      u32 s_id, u32 d_id, void *buffer, int buflen)
 {
Index: quilt-2.6/include/asm-s390/ipl.h
===================================================================
--- quilt-2.6.orig/include/asm-s390/ipl.h
+++ quilt-2.6/include/asm-s390/ipl.h
@@ -79,8 +79,8 @@ struct ipl_parameter_block {
  * IPL validity flags
  */
 extern u32 ipl_flags;
-
 extern u32 dump_prefix_page;
+extern unsigned int zfcpdump_prefix_array[];
 
 extern void do_reipl(void);
 extern void ipl_save_parameters(void);

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 07/15] qdio: re-add lost perf_stats.tl_runs change in qdio_handle_pci
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (5 preceding siblings ...)
  2007-05-10 13:51 ` [patch 06/15] Avoid sparse warnings Martin Schwidefsky
@ 2007-05-10 13:51 ` Martin Schwidefsky
  2007-05-10 13:52 ` [patch 08/15] Avoid compile warning Martin Schwidefsky
                   ` (7 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:51 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Ursula Braun, Martin Schwidefsky

[-- Attachment #1: 007-qdio-stats.diff --]
[-- Type: text/plain, Size: 818 bytes --]

From: Ursula Braun <braunu@de.ibm.com>

Statement has been inadvertently lost with commit
00c0c6466c66bdf05f2a3dcf59e6895179ea8b76.

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/s390/cio/qdio.c |    1 +
 1 file changed, 1 insertion(+)

Index: quilt-2.6/drivers/s390/cio/qdio.c
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/qdio.c
+++ quilt-2.6/drivers/s390/cio/qdio.c
@@ -1983,6 +1983,7 @@ qdio_handle_pci(struct qdio_irq *irq_ptr
 		if (q->is_input_q&QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT)
 			qdio_mark_q(q);
 		else {
+			qdio_perf_stat_dec(&perf_stats.tl_runs);
 			__qdio_inbound_processing(q);
 		}
 	}

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 08/15] Avoid compile warning.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (6 preceding siblings ...)
  2007-05-10 13:51 ` [patch 07/15] qdio: re-add lost perf_stats.tl_runs change in qdio_handle_pci Martin Schwidefsky
@ 2007-05-10 13:52 ` Martin Schwidefsky
  2007-05-10 13:52 ` [patch 09/15] Kconfig: refine depends statements Martin Schwidefsky
                   ` (6 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:52 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Heiko Carstens

[-- Attachment #1: 008-warning.diff --]
[-- Type: text/plain, Size: 866 bytes --]

From: Heiko Carstens <heiko.carstens@de.ibm.com>

arch/s390/mm/fault.c: In function `signal_return': 
arch/s390/mm/fault.c:256: warning: unused variable `compat' 

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---

 arch/s390/mm/fault.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Index: quilt-2.6/arch/s390/mm/fault.c
===================================================================
--- quilt-2.6.orig/arch/s390/mm/fault.c
+++ quilt-2.6/arch/s390/mm/fault.c
@@ -253,7 +253,10 @@ static int signal_return(struct mm_struc
 			 unsigned long address, unsigned long error_code)
 {
 	u16 instruction;
-	int rc, compat;
+	int rc;
+#ifdef CONFIG_COMPAT
+	int compat;
+#endif
 
 	pagefault_disable();
 	rc = __get_user(instruction, (u16 __user *) regs->psw.addr);

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 09/15] Kconfig: refine depends statements.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (7 preceding siblings ...)
  2007-05-10 13:52 ` [patch 08/15] Avoid compile warning Martin Schwidefsky
@ 2007-05-10 13:52 ` Martin Schwidefsky
  2007-05-10 13:52 ` [patch 10/15] Kconfig: menus with depends on HAS_IOMEM Martin Schwidefsky
                   ` (5 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:52 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Martin Schwidefsky

[-- Attachment #1: 100-kconfig-refine.diff --]
[-- Type: text/plain, Size: 2914 bytes --]

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Refine some depends statements to limit their visibility to the
environments that are actually supported.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/auxdisplay/Kconfig     |    1 +
 drivers/char/Kconfig           |    2 ++
 drivers/ieee1394/Kconfig       |    1 +
 drivers/kvm/Kconfig            |    1 +
 drivers/message/fusion/Kconfig |    1 +
 drivers/message/i2o/Kconfig    |    1 +
 6 files changed, 7 insertions(+)

Index: quilt-2.6/drivers/auxdisplay/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/auxdisplay/Kconfig
+++ quilt-2.6/drivers/auxdisplay/Kconfig
@@ -6,6 +6,7 @@
 #
 
 menu "Auxiliary Display support"
+	depends on PARPORT
 
 config KS0108
 	tristate "KS0108 LCD Controller"
Index: quilt-2.6/drivers/char/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/char/Kconfig
+++ quilt-2.6/drivers/char/Kconfig
@@ -81,6 +81,7 @@ config VT_HW_CONSOLE_BINDING
 
 config SERIAL_NONSTANDARD
 	bool "Non-standard serial port support"
+	depends on HAS_IOMEM
 	---help---
 	  Say Y here if you have any non-standard serial boards -- boards
 	  which aren't supported using the standard "dumb" serial driver.
@@ -858,6 +859,7 @@ config COBALT_LCD
 
 config DTLK
 	tristate "Double Talk PC internal speech card support"
+	depends on ISA
 	help
 	  This driver is for the DoubleTalk PC, a speech synthesizer
 	  manufactured by RC Systems (<http://www.rcsys.com/>).  It is also
Index: quilt-2.6/drivers/ieee1394/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/ieee1394/Kconfig
+++ quilt-2.6/drivers/ieee1394/Kconfig
@@ -1,4 +1,5 @@
 menu "IEEE 1394 (FireWire) support"
+	depends on PCI || BROKEN
 
 config IEEE1394
 	tristate "IEEE 1394 (FireWire) support"
Index: quilt-2.6/drivers/kvm/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/kvm/Kconfig
+++ quilt-2.6/drivers/kvm/Kconfig
@@ -2,6 +2,7 @@
 # KVM configuration
 #
 menu "Virtualization"
+	depends on X86
 
 config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
Index: quilt-2.6/drivers/message/fusion/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/message/fusion/Kconfig
+++ quilt-2.6/drivers/message/fusion/Kconfig
@@ -1,5 +1,6 @@
 
 menu "Fusion MPT device support"
+	depends on PCI
 
 config FUSION
 	bool
Index: quilt-2.6/drivers/message/i2o/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/message/i2o/Kconfig
+++ quilt-2.6/drivers/message/i2o/Kconfig
@@ -1,5 +1,6 @@
 
 menu "I2O device support"
+	depends on PCI
 
 config I2O
 	tristate "I2O support"

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 10/15] Kconfig: menus with depends on HAS_IOMEM.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (8 preceding siblings ...)
  2007-05-10 13:52 ` [patch 09/15] Kconfig: refine depends statements Martin Schwidefsky
@ 2007-05-10 13:52 ` Martin Schwidefsky
  2007-05-10 13:52 ` [patch 11/15] Kconfig: unwanted menus for s390 Martin Schwidefsky
                   ` (4 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:52 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Martin Schwidefsky

[-- Attachment #1: 101-kconfig-menu-iomem.diff --]
[-- Type: text/plain, Size: 8421 bytes --]

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/ata/Kconfig        |    1 +
 drivers/char/ipmi/Kconfig  |    2 ++
 drivers/char/tpm/Kconfig   |    1 +
 drivers/edac/Kconfig       |    1 +
 drivers/hwmon/Kconfig      |    1 +
 drivers/i2c/Kconfig        |    1 +
 drivers/ide/Kconfig        |    1 +
 drivers/infiniband/Kconfig |    1 +
 drivers/leds/Kconfig       |    1 +
 drivers/media/Kconfig      |    1 +
 drivers/mfd/Kconfig        |    1 +
 drivers/mmc/Kconfig        |    1 +
 drivers/mtd/Kconfig        |    1 +
 drivers/parport/Kconfig    |    1 +
 drivers/pnp/Kconfig        |    1 +
 drivers/serial/Kconfig     |    1 +
 drivers/spi/Kconfig        |    1 +
 drivers/telephony/Kconfig  |    1 +
 drivers/usb/Kconfig        |    1 +
 drivers/video/Kconfig      |    1 +
 drivers/w1/Kconfig         |    1 +
 sound/Kconfig              |    1 +
 22 files changed, 23 insertions(+)

Index: quilt-2.6/drivers/ata/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/ata/Kconfig
+++ quilt-2.6/drivers/ata/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "Serial ATA (prod) and Parallel ATA (experimental) drivers"
+	depends on HAS_IOMEM
 
 config ATA
 	tristate "ATA device support"
Index: quilt-2.6/drivers/char/ipmi/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/char/ipmi/Kconfig
+++ quilt-2.6/drivers/char/ipmi/Kconfig
@@ -3,6 +3,8 @@
 #
 
 menu "IPMI"
+	depends on HAS_IOMEM
+
 config IPMI_HANDLER
        tristate 'IPMI top-level message handler'
        help
Index: quilt-2.6/drivers/char/tpm/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/char/tpm/Kconfig
+++ quilt-2.6/drivers/char/tpm/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "TPM devices"
+	depends on HAS_IOMEM
 
 config TCG_TPM
 	tristate "TPM Hardware Support"
Index: quilt-2.6/drivers/edac/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/edac/Kconfig
+++ quilt-2.6/drivers/edac/Kconfig
@@ -7,6 +7,7 @@
 #
 
 menu 'EDAC - error detection and reporting (RAS) (EXPERIMENTAL)'
+	depends on HAS_IOMEM
 
 config EDAC
 	tristate "EDAC core system error reporting (EXPERIMENTAL)"
Index: quilt-2.6/drivers/hwmon/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/hwmon/Kconfig
+++ quilt-2.6/drivers/hwmon/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig HWMON
 	tristate "Hardware Monitoring support"
+	depends on HAS_IOMEM
 	default y
 	help
 	  Hardware monitoring devices let you monitor the hardware health
Index: quilt-2.6/drivers/i2c/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/i2c/Kconfig
+++ quilt-2.6/drivers/i2c/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig I2C
 	tristate "I2C support"
+	depends on HAS_IOMEM
 	---help---
 	  I2C (pronounce: I-square-C) is a slow serial bus protocol used in
 	  many micro controller applications and developed by Philips.  SMBus,
Index: quilt-2.6/drivers/ide/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/ide/Kconfig
+++ quilt-2.6/drivers/ide/Kconfig
@@ -7,6 +7,7 @@
 if BLOCK
 
 menu "ATA/ATAPI/MFM/RLL support"
+	depends on HAS_IOMEM
 
 config IDE
 	tristate "ATA/ATAPI/MFM/RLL support"
Index: quilt-2.6/drivers/infiniband/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/infiniband/Kconfig
+++ quilt-2.6/drivers/infiniband/Kconfig
@@ -1,4 +1,5 @@
 menu "InfiniBand support"
+	depends on HAS_IOMEM
 
 config INFINIBAND
 	depends on PCI || BROKEN
Index: quilt-2.6/drivers/leds/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/leds/Kconfig
+++ quilt-2.6/drivers/leds/Kconfig
@@ -1,5 +1,6 @@
 
 menu "LED devices"
+	depends on HAS_IOMEM
 
 config NEW_LEDS
 	bool "LED Support"
Index: quilt-2.6/drivers/media/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/media/Kconfig
+++ quilt-2.6/drivers/media/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "Multimedia devices"
+	depends on HAS_IOMEM
 
 config VIDEO_DEV
 	tristate "Video For Linux"
Index: quilt-2.6/drivers/mfd/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/mfd/Kconfig
+++ quilt-2.6/drivers/mfd/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "Multifunction device drivers"
+	depends on HAS_IOMEM
 
 config MFD_SM501
 	tristate "Support for Silicon Motion SM501"
Index: quilt-2.6/drivers/mmc/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/mmc/Kconfig
+++ quilt-2.6/drivers/mmc/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig MMC
 	tristate "MMC/SD card support"
+	depends on HAS_IOMEM
 	help
 	  MMC is the "multi-media card" bus protocol.
 
Index: quilt-2.6/drivers/mtd/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/mtd/Kconfig
+++ quilt-2.6/drivers/mtd/Kconfig
@@ -2,6 +2,7 @@
 
 menuconfig MTD
 	tristate "Memory Technology Device (MTD) support"
+	depends on HAS_IOMEM
 	help
 	  Memory Technology Devices are flash, RAM and similar chips, often
 	  used for solid state file systems on embedded devices. This option
Index: quilt-2.6/drivers/parport/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/parport/Kconfig
+++ quilt-2.6/drivers/parport/Kconfig
@@ -6,6 +6,7 @@
 #
 
 menu "Parallel port support"
+	depends on HAS_IOMEM
 
 config PARPORT
 	tristate "Parallel port support"
Index: quilt-2.6/drivers/pnp/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/pnp/Kconfig
+++ quilt-2.6/drivers/pnp/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "Plug and Play support"
+	depends on HAS_IOMEM
 
 config PNP
 	bool "Plug and Play support"
Index: quilt-2.6/drivers/serial/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/serial/Kconfig
+++ quilt-2.6/drivers/serial/Kconfig
@@ -5,6 +5,7 @@
 #
 
 menu "Serial drivers"
+	depends on HAS_IOMEM
 
 #
 # The new 8250/16550 serial drivers
Index: quilt-2.6/drivers/spi/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/spi/Kconfig
+++ quilt-2.6/drivers/spi/Kconfig
@@ -6,6 +6,7 @@
 # fully appropriate there, so it'd need some thought to do well.
 #
 menu "SPI support"
+	depends on HAS_IOMEM
 
 config SPI
 	bool "SPI support"
Index: quilt-2.6/drivers/telephony/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/telephony/Kconfig
+++ quilt-2.6/drivers/telephony/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "Telephony Support"
+	depends on HAS_IOMEM
 
 config PHONE
 	tristate "Linux telephony support"
Index: quilt-2.6/drivers/usb/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/usb/Kconfig
+++ quilt-2.6/drivers/usb/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "USB support"
+	depends on HAS_IOMEM
 
 # Host-side USB depends on having a host controller
 # NOTE:  dummy_hcd is always an option, but it's ignored here ...
Index: quilt-2.6/drivers/video/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/video/Kconfig
+++ quilt-2.6/drivers/video/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "Graphics support"
+	depends on HAS_IOMEM
 
 source "drivers/video/backlight/Kconfig"
 source "drivers/video/display/Kconfig"
Index: quilt-2.6/drivers/w1/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/w1/Kconfig
+++ quilt-2.6/drivers/w1/Kconfig
@@ -1,4 +1,5 @@
 menu "Dallas's 1-wire bus"
+	depends on HAS_IOMEM
 
 config W1
 	tristate "Dallas's 1-wire support"
Index: quilt-2.6/sound/Kconfig
===================================================================
--- quilt-2.6.orig/sound/Kconfig
+++ quilt-2.6/sound/Kconfig
@@ -2,6 +2,7 @@
 #
 
 menu "Sound"
+	depends on HAS_IOMEM
 
 config SOUND
 	tristate "Sound card support"

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 11/15] Kconfig: unwanted menus for s390.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (9 preceding siblings ...)
  2007-05-10 13:52 ` [patch 10/15] Kconfig: menus with depends on HAS_IOMEM Martin Schwidefsky
@ 2007-05-10 13:52 ` Martin Schwidefsky
  2007-05-10 13:52 ` [patch 12/15] Kconfig: common config options " Martin Schwidefsky
                   ` (3 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:52 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Martin Schwidefsky

[-- Attachment #1: 102-kconfig-menu-s390.diff --]
[-- Type: text/plain, Size: 3215 bytes --]

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Disable some more menus in the configuration files that are of no
interest to a s390 machine.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/dma/Kconfig     |    1 +
 drivers/input/Kconfig   |    1 +
 drivers/isdn/Kconfig    |    1 +
 drivers/net/phy/Kconfig |    1 +
 drivers/rtc/Kconfig     |    1 +
 net/ax25/Kconfig        |    2 +-
 net/bluetooth/Kconfig   |    2 +-
 net/irda/Kconfig        |    2 +-
 8 files changed, 8 insertions(+), 3 deletions(-)

Index: quilt-2.6/drivers/dma/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/dma/Kconfig
+++ quilt-2.6/drivers/dma/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "DMA Engine support"
+	depends on !S390
 
 config DMA_ENGINE
 	bool "Support for DMA engines"
Index: quilt-2.6/drivers/input/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/input/Kconfig
+++ quilt-2.6/drivers/input/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "Input device support"
+	depends on !S390
 
 config INPUT
 	tristate "Generic input layer (needed for keyboard, mouse, ...)" if EMBEDDED
Index: quilt-2.6/drivers/isdn/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/isdn/Kconfig
+++ quilt-2.6/drivers/isdn/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "ISDN subsystem"
+	depends on !S390
 
 config ISDN
 	tristate "ISDN support"
Index: quilt-2.6/drivers/net/phy/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/net/phy/Kconfig
+++ quilt-2.6/drivers/net/phy/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "PHY device support"
+	depends on !S390
 
 config PHYLIB
 	tristate "PHY Device support and infrastructure"
Index: quilt-2.6/drivers/rtc/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/rtc/Kconfig
+++ quilt-2.6/drivers/rtc/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "Real Time Clock"
+	depends on !S390
 
 config RTC_LIB
 	tristate
Index: quilt-2.6/net/ax25/Kconfig
===================================================================
--- quilt-2.6.orig/net/ax25/Kconfig
+++ quilt-2.6/net/ax25/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig HAMRADIO
-	depends on NET
+	depends on NET && !S390
 	bool "Amateur Radio support"
 	help
 	  If you want to connect your Linux box to an amateur radio, answer Y
Index: quilt-2.6/net/bluetooth/Kconfig
===================================================================
--- quilt-2.6.orig/net/bluetooth/Kconfig
+++ quilt-2.6/net/bluetooth/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig BT
-	depends on NET
+	depends on NET && !S390
 	tristate "Bluetooth subsystem support"
 	help
 	  Bluetooth is low-cost, low-power, short-range wireless technology.
Index: quilt-2.6/net/irda/Kconfig
===================================================================
--- quilt-2.6.orig/net/irda/Kconfig
+++ quilt-2.6/net/irda/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig IRDA
-	depends on NET
+	depends on NET && !S390
 	tristate "IrDA (infrared) subsystem support"
 	select CRC_CCITT
 	---help---

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 12/15] Kconfig: common config options for s390.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (10 preceding siblings ...)
  2007-05-10 13:52 ` [patch 11/15] Kconfig: unwanted menus for s390 Martin Schwidefsky
@ 2007-05-10 13:52 ` Martin Schwidefsky
  2007-05-10 13:52 ` [patch 13/15] Kconfig: use common Kconfig files " Martin Schwidefsky
                   ` (2 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:52 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Martin Schwidefsky

[-- Attachment #1: 103-kconfig-option-s390.diff --]
[-- Type: text/plain, Size: 1897 bytes --]

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Disable some configuration options in the common Kconfig files that
are of no interest to a s390 machine. Enable hangcheck timer.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/char/Kconfig |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Index: quilt-2.6/drivers/char/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/char/Kconfig
+++ quilt-2.6/drivers/char/Kconfig
@@ -6,6 +6,7 @@ menu "Character devices"
 
 config VT
 	bool "Virtual terminal" if EMBEDDED
+	depends on !S390
 	select INPUT
 	default y if !VIOCONS
 	---help---
@@ -766,7 +767,7 @@ config NVRAM
 
 config RTC
 	tristate "Enhanced Real Time Clock Support"
-	depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH
+	depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH && !S390
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -814,7 +815,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
+	depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -1045,7 +1046,7 @@ config HPET_MMAP
 
 config HANGCHECK_TIMER
 	tristate "Hangcheck timer"
-	depends on X86 || IA64 || PPC64
+	depends on X86 || IA64 || PPC64 || S390
 	help
 	  The hangcheck-timer module detects when the system has gone
 	  out to lunch past a certain margin.  It can reboot the system

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 13/15] Kconfig: use common Kconfig files for s390.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (11 preceding siblings ...)
  2007-05-10 13:52 ` [patch 12/15] Kconfig: common config options " Martin Schwidefsky
@ 2007-05-10 13:52 ` Martin Schwidefsky
  2007-05-10 13:52 ` [patch 14/15] Kconfig: no wireless on s390 Martin Schwidefsky
  2007-05-10 13:52 ` [patch 15/15] update default configuration Martin Schwidefsky
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:52 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Martin Schwidefsky

[-- Attachment #1: 104-kconfig-common-s390.diff --]
[-- Type: text/plain, Size: 21753 bytes --]

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Disband drivers/s390/Kconfig, use the common Kconfig files. The s390
specific config options from drivers/s390/Kconfig are moved to the
respective common Kconfig files.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 arch/s390/Kconfig          |   49 +++------
 drivers/block/Kconfig      |    4 
 drivers/char/Kconfig       |    2 
 drivers/crypto/Kconfig     |   22 ++++
 drivers/s390/Kconfig       |  239 ---------------------------------------------
 drivers/s390/block/Kconfig |   11 --
 drivers/s390/char/Kconfig  |  166 +++++++++++++++++++++++++++++++
 drivers/s390/net/Kconfig   |    8 -
 include/asm-s390/param.h   |    2 
 9 files changed, 217 insertions(+), 286 deletions(-)

Index: quilt-2.6/arch/s390/Kconfig
===================================================================
--- quilt-2.6.orig/arch/s390/Kconfig
+++ quilt-2.6/arch/s390/Kconfig
@@ -4,27 +4,23 @@
 #
 
 config MMU
-	bool
-	default y
+	def_bool y
 
 config ZONE_DMA
 	def_bool y
 	depends on 64BIT
 
 config LOCKDEP_SUPPORT
-	bool
-	default y
+	def_bool y
 
 config STACKTRACE_SUPPORT
-	bool
-	default y
+	def_bool y
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
 
 config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
+	def_bool y
 
 config ARCH_HAS_ILOG2_U32
 	bool
@@ -35,8 +31,7 @@ config ARCH_HAS_ILOG2_U64
 	default n
 
 config GENERIC_HWEIGHT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_TIME
 	def_bool y
@@ -55,8 +50,7 @@ config NO_DMA
 mainmenu "Linux Kernel Configuration"
 
 config S390
-	bool
-	default y
+	def_bool y
 
 source "init/Kconfig"
 
@@ -280,6 +274,10 @@ config WARN_STACK_SIZE
 config ARCH_POPULATES_NODE_MAP
 	def_bool y
 
+comment "Kernel preemption"
+
+source "kernel/Kconfig.preempt"
+
 source "mm/Kconfig"
 
 config HOLES_IN_ZONE
@@ -320,17 +318,6 @@ config QDIO_DEBUG
 
 comment "Misc"
 
-config PREEMPT
-	bool "Preemptible Kernel"
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say N if you are unsure.
-
 config IPL
 	bool "Builtin IPL record support"
 	help
@@ -488,6 +475,8 @@ config APPLDATA_NET_SUM
 	  This can also be compiled as a module, which will be called
 	  appldata_net_sum.o.
 
+source kernel/Kconfig.hz
+
 config NO_IDLE_HZ
 	bool "No HZ timer ticks in idle"
 	help
@@ -535,18 +524,12 @@ endmenu
 source "net/Kconfig"
 
 config PCMCIA
-	bool
-	default n
-
-source "drivers/base/Kconfig"
+	def_bool n
 
-source "drivers/connector/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/s390/Kconfig"
+config CCW
+	def_bool y
 
-source "drivers/net/Kconfig"
+source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
Index: quilt-2.6/drivers/block/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/block/Kconfig
+++ quilt-2.6/drivers/block/Kconfig
@@ -444,8 +444,6 @@ config CDROM_PKTCDVD_WCACHE
 	  this option is dangerous unless the CD-RW media is known good, as we
 	  don't do deferred write error handling yet.
 
-source "drivers/s390/block/Kconfig"
-
 config ATA_OVER_ETH
 	tristate "ATA over Ethernet support"
 	depends on NET
@@ -453,6 +451,8 @@ config ATA_OVER_ETH
 	This driver provides Support for ATA over Ethernet block
 	devices like the Coraid EtherDrive (R) Storage Blade.
 
+source "drivers/s390/block/Kconfig"
+
 endmenu
 
 endif
Index: quilt-2.6/drivers/char/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/char/Kconfig
+++ quilt-2.6/drivers/char/Kconfig
@@ -1081,5 +1081,7 @@ config DEVPORT
 	depends on ISA || PCI
 	default y
 
+source "drivers/s390/char/Kconfig"
+
 endmenu
 
Index: quilt-2.6/drivers/crypto/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/crypto/Kconfig
+++ quilt-2.6/drivers/crypto/Kconfig
@@ -56,4 +56,26 @@ config CRYPTO_DEV_GEODE
 	  To compile this driver as a module, choose M here: the module
 	  will be called geode-aes.
 
+config ZCRYPT
+	tristate "Support for PCI-attached cryptographic adapters"
+	depends on S390
+	select ZCRYPT_MONOLITHIC if ZCRYPT="y"
+	default "m"
+	help
+	  Select this option if you want to use a PCI-attached cryptographic
+	  adapter like:
+	  + PCI Cryptographic Accelerator (PCICA)
+	  + PCI Cryptographic Coprocessor (PCICC)
+	  + PCI-X Cryptographic Coprocessor (PCIXCC)
+	  + Crypto Express2 Coprocessor (CEX2C)
+	  + Crypto Express2 Accelerator (CEX2A)
+
+config ZCRYPT_MONOLITHIC
+	bool "Monolithic zcrypt module"
+	depends on ZCRYPT="m"
+	help
+	  Select this option if you want to have a single module z90crypt.ko
+	  that contains all parts of the crypto device driver (ap bus,
+	  request router and all the card drivers).
+
 endmenu
Index: quilt-2.6/drivers/s390/block/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/s390/block/Kconfig
+++ quilt-2.6/drivers/s390/block/Kconfig
@@ -1,11 +1,9 @@
-if S390 && BLOCK
-
 comment "S/390 block device drivers"
-	depends on S390
+	depends on S390 && BLOCK
 
 config BLK_DEV_XPRAM
 	tristate "XPRAM disk support"
-	depends on S390
+	depends on S390 && BLOCK
 	help
 	  Select this option if you want to use your expanded storage on S/390
 	  or zSeries as a disk.  This is useful as a _fast_ swap device if you
@@ -15,12 +13,13 @@ config BLK_DEV_XPRAM
 
 config DCSSBLK
 	tristate "DCSSBLK support"
+	depends on S390 && BLOCK
 	help
 	  Support for dcss block device
 
 config DASD
 	tristate "Support for DASD devices"
-	depends on CCW
+	depends on CCW && BLOCK
 	help
 	  Enable this option if you want to access DASDs directly utilizing
 	  S/390s channel subsystem commands. This is necessary for running
@@ -62,5 +61,3 @@ config DASD_EER
 	  This driver provides a character device interface to the
 	  DASD extended error reporting. This is only needed if you want to
 	  use applications written for the EER facility.
-
-endif
Index: quilt-2.6/drivers/s390/char/Kconfig
===================================================================
--- /dev/null
+++ quilt-2.6/drivers/s390/char/Kconfig
@@ -0,0 +1,166 @@
+comment "S/390 character device drivers"
+	depends on S390
+
+config TN3270
+	tristate "Support for locally attached 3270 terminals"
+	depends on CCW
+	help
+	  Include support for IBM 3270 terminals.
+
+config TN3270_TTY
+	tristate "Support for tty input/output on 3270 terminals"
+	depends on TN3270
+	help
+	  Include support for using an IBM 3270 terminal as a Linux tty.
+
+config TN3270_FS
+	tristate "Support for fullscreen applications on 3270 terminals"
+	depends on TN3270
+	help
+	  Include support for fullscreen applications on an IBM 3270 terminal.
+
+config TN3270_CONSOLE
+	bool "Support for console on 3270 terminal"
+	depends on TN3270=y && TN3270_TTY=y
+	help
+	  Include support for using an IBM 3270 terminal as a Linux system
+	  console.  Available only if 3270 support is compiled in statically.
+
+config TN3215
+	bool "Support for 3215 line mode terminal"
+	depends on CCW
+	help
+	  Include support for IBM 3215 line-mode terminals.
+
+config TN3215_CONSOLE
+	bool "Support for console on 3215 line mode terminal"
+	depends on TN3215
+	help
+	  Include support for using an IBM 3215 line-mode terminal as a
+	  Linux system console.
+
+config CCW_CONSOLE
+	bool
+	depends on TN3215_CONSOLE || TN3270_CONSOLE
+	default y
+
+config SCLP
+	bool "Support for SCLP"
+	depends on S390
+	help
+	  Include support for the SCLP interface to the service element.
+
+config SCLP_TTY
+	bool "Support for SCLP line mode terminal"
+	depends on SCLP
+	help
+	  Include support for IBM SCLP line-mode terminals.
+
+config SCLP_CONSOLE
+	bool "Support for console on SCLP line mode terminal"
+	depends on SCLP_TTY
+	help
+	  Include support for using an IBM HWC line-mode terminal as the Linux
+	  system console.
+
+config SCLP_VT220_TTY
+	bool "Support for SCLP VT220-compatible terminal"
+	depends on SCLP
+	help
+	  Include support for an IBM SCLP VT220-compatible terminal.
+
+config SCLP_VT220_CONSOLE
+	bool "Support for console on SCLP VT220-compatible terminal"
+	depends on SCLP_VT220_TTY
+	help
+	  Include support for using an IBM SCLP VT220-compatible terminal as a
+	  Linux system console.
+
+config SCLP_CPI
+	tristate "Control-Program Identification"
+	depends on SCLP
+	help
+	  This option enables the hardware console interface for system
+	  identification. This is commonly used for workload management and
+	  gives you a nice name for the system on the service element.
+	  Please select this option as a module since built-in operation is
+	  completely untested.
+	  You should only select this option if you know what you are doing,
+	  need this feature and intend to run your kernel in LPAR.
+
+config S390_TAPE
+	tristate "S/390 tape device support"
+	depends on CCW
+	help
+	  Select this option if you want to access channel-attached tape
+	  devices on IBM S/390 or zSeries.
+	  If you select this option you will also want to select at
+	  least one of the tape interface options and one of the tape
+	  hardware options in order to access a tape device.
+	  This option is also available as a module. The module will be
+	  called tape390 and include all selected interfaces and
+	  hardware drivers.
+
+comment "S/390 tape interface support"
+	depends on S390_TAPE
+
+config S390_TAPE_BLOCK
+	bool "Support for tape block devices"
+	depends on S390_TAPE
+	help
+	  Select this option if you want to access your channel-attached tape
+	  devices using the block device interface.  This interface is similar
+	  to CD-ROM devices on other platforms.  The tapes can only be
+	  accessed read-only when using this interface.  Have a look at
+	  <file:Documentation/s390/TAPE> for further information about creating
+	  volumes for and using this interface.  It is safe to say "Y" here.
+
+comment "S/390 tape hardware support"
+	depends on S390_TAPE
+
+config S390_TAPE_34XX
+	tristate "Support for 3480/3490 tape hardware"
+	depends on S390_TAPE
+	help
+	  Select this option if you want to access IBM 3480/3490 magnetic
+	  tape subsystems and 100% compatibles.
+	  It is safe to say "Y" here.
+
+config S390_TAPE_3590
+	tristate "Support for 3590 tape hardware"
+	depends on S390_TAPE
+	help
+	  Select this option if you want to access IBM 3590 magnetic
+	  tape subsystems and 100% compatibles.
+	  It is safe to say "Y" here.
+
+config VMLOGRDR
+	tristate "Support for the z/VM recording system services (VM only)"
+	depends on IUCV
+	help
+	  Select this option if you want to be able to receive records collected
+	  by the z/VM recording system services, eg. from *LOGREC, *ACCOUNT or
+	  *SYMPTOM.
+	  This driver depends on the IUCV support driver.
+
+config VMCP
+	tristate "Support for the z/VM CP interface (VM only)"
+	depends on S390
+	help
+	  Select this option if you want to be able to interact with the control
+	  program on z/VM
+
+
+config MONREADER
+	tristate "API for reading z/VM monitor service records"
+	depends on IUCV
+	help
+	  Character device driver for reading z/VM monitor service records
+
+config MONWRITER
+	tristate "API for writing z/VM monitor service records"
+	depends on S390
+	default "m"
+	help
+	  Character device driver for writing z/VM monitor service records
+
Index: quilt-2.6/drivers/s390/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/s390/Kconfig
+++ /dev/null
@@ -1,239 +0,0 @@
-config CCW
-	bool
-	default y
-
-source "drivers/block/Kconfig"
-
-source "drivers/md/Kconfig"
-
-
-menu "Character device drivers"
-
-config UNIX98_PTYS
-	bool "Unix98 PTY support"
-	---help---
-	  A pseudo terminal (PTY) is a software device consisting of two
-	  halves: a master and a slave. The slave device behaves identical to
-	  a physical terminal; the master device is used by a process to
-	  read data from and write data to the slave, thereby emulating a
-	  terminal. Typical programs for the master side are telnet servers
-	  and xterms.
-
-	  Linux has traditionally used the BSD-like names /dev/ptyxx for
-	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
-	  has a number of problems. The GNU C library glibc 2.1 and later,
-	  however, supports the Unix98 naming standard: in order to acquire a
-	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
-	  terminal is then made available to the process and the pseudo
-	  terminal slave can be accessed as /dev/pts/<number>. What was
-	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
-	  The entries in /dev/pts/ are created on the fly by a virtual
-	  file system; therefore, if you say Y here you should say Y to
-	  "/dev/pts file system for Unix98 PTYs" as well.
-
-	  If you want to say Y here, you need to have the C library glibc 2.1
-	  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
-	  Read the instructions in <file:Documentation/Changes> pertaining to
-	  pseudo terminals. It's safe to say N.
-
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
-config HANGCHECK_TIMER
-	tristate "Hangcheck timer"
-	help
-	  The hangcheck-timer module detects when the system has gone
-	  out to lunch past a certain margin.  It can reboot the system
-	  or merely print a warning.
-
-source "drivers/char/watchdog/Kconfig"
-
-comment "S/390 character device drivers"
-
-config TN3270
-	tristate "Support for locally attached 3270 terminals"
-	help
-	  Include support for IBM 3270 terminals.
-
-config TN3270_TTY
-	tristate "Support for tty input/output on 3270 terminals"
-	depends on TN3270
-	help
-	  Include support for using an IBM 3270 terminal as a Linux tty.
-
-config TN3270_FS
-	tristate "Support for fullscreen applications on 3270 terminals"
-	depends on TN3270
-	help
-	  Include support for fullscreen applications on an IBM 3270 terminal.
-
-config TN3270_CONSOLE
-	bool "Support for console on 3270 terminal"
-	depends on TN3270=y && TN3270_TTY=y
-	help
-	  Include support for using an IBM 3270 terminal as a Linux system
-	  console.  Available only if 3270 support is compiled in statically.
-
-config TN3215
-	bool "Support for 3215 line mode terminal"
-	help
-	  Include support for IBM 3215 line-mode terminals.
-
-config TN3215_CONSOLE
-	bool "Support for console on 3215 line mode terminal"
-	depends on TN3215
-	help
-	  Include support for using an IBM 3215 line-mode terminal as a
-	  Linux system console.
-
-config CCW_CONSOLE
- 	bool
- 	depends on TN3215_CONSOLE || TN3270_CONSOLE
- 	default y
- 
-config SCLP_TTY
-	bool "Support for SCLP line mode terminal"
-	help
-	  Include support for IBM SCLP line-mode terminals.
-
-config SCLP_CONSOLE
-	bool "Support for console on SCLP line mode terminal"
-	depends on SCLP_TTY
-	help
-	  Include support for using an IBM HWC line-mode terminal as the Linux
-	  system console.
-
-config SCLP_VT220_TTY
-	bool "Support for SCLP VT220-compatible terminal"
-	help
-	  Include support for an IBM SCLP VT220-compatible terminal.
-
-config SCLP_VT220_CONSOLE
-	bool "Support for console on SCLP VT220-compatible terminal"
-	depends on SCLP_VT220_TTY
-	help
-	  Include support for using an IBM SCLP VT220-compatible terminal as a
-	  Linux system console.
-
-config SCLP_CPI
-	tristate "Control-Program Identification"
-	help
-	  This option enables the hardware console interface for system
-	  identification. This is commonly used for workload management and
-	  gives you a nice name for the system on the service element.
-	  Please select this option as a module since built-in operation is
-	  completely untested.
-	  You should only select this option if you know what you are doing,
-	  need this feature and intend to run your kernel in LPAR.
-
-config S390_TAPE
-	tristate "S/390 tape device support"
-	help
-	  Select this option if you want to access channel-attached tape
-	  devices on IBM S/390 or zSeries.
-	  If you select this option you will also want to select at
-	  least one of the tape interface options and one of the tape
-	  hardware options in order to access a tape device.
-	  This option is also available as a module. The module will be
-	  called tape390 and include all selected interfaces and
-	  hardware drivers.
-
-comment "S/390 tape interface support"
-	depends on S390_TAPE
-
-config S390_TAPE_BLOCK
-	bool "Support for tape block devices"
-	depends on S390_TAPE
-	help
-	  Select this option if you want to access your channel-attached tape
-	  devices using the block device interface.  This interface is similar
-	  to CD-ROM devices on other platforms.  The tapes can only be
-	  accessed read-only when using this interface.  Have a look at
-	  <file:Documentation/s390/TAPE> for further information about creating
-	  volumes for and using this interface.  It is safe to say "Y" here.
-
-comment "S/390 tape hardware support"
-	depends on S390_TAPE
-
-config S390_TAPE_34XX
-	tristate "Support for 3480/3490 tape hardware"
-	depends on S390_TAPE
-	help
-	  Select this option if you want to access IBM 3480/3490 magnetic
-	  tape subsystems and 100% compatibles.
-	  It is safe to say "Y" here.
-
-config S390_TAPE_3590
-	tristate "Support for 3590 tape hardware"
-	depends on S390_TAPE
-	help
-	  Select this option if you want to access IBM 3590 magnetic
-	  tape subsystems and 100% compatibles.
-	  It is safe to say "Y" here.
-
-config VMLOGRDR
-	tristate "Support for the z/VM recording system services (VM only)"
-	depends on IUCV
-	help
-	  Select this option if you want to be able to receive records collected
-	  by the z/VM recording system services, eg. from *LOGREC, *ACCOUNT or
-	  *SYMPTOM.
-	  This driver depends on the IUCV support driver.
-
-config VMCP
-	tristate "Support for the z/VM CP interface (VM only)"
-	help
-	  Select this option if you want to be able to interact with the control
-	  program on z/VM
-
-
-config MONREADER
-	tristate "API for reading z/VM monitor service records"
-	depends on IUCV
-	help
-	  Character device driver for reading z/VM monitor service records
-
-config MONWRITER
-	tristate "API for writing z/VM monitor service records"
-	default "m"
-	help
-	  Character device driver for writing z/VM monitor service records
-
-endmenu
-
-menu "Cryptographic devices"
-
-config ZCRYPT
-	tristate "Support for PCI-attached cryptographic adapters"
-	select ZCRYPT_MONOLITHIC if ZCRYPT="y"
-	default "m"
-	help
-	  Select this option if you want to use a PCI-attached cryptographic
-	  adapter like:
-	  + PCI Cryptographic Accelerator (PCICA)
-	  + PCI Cryptographic Coprocessor (PCICC)
-	  + PCI-X Cryptographic Coprocessor (PCIXCC)
-	  + Crypto Express2 Coprocessor (CEX2C)
-	  + Crypto Express2 Accelerator (CEX2A)
-
-config ZCRYPT_MONOLITHIC
-	bool "Monolithic zcrypt module"
-	depends on ZCRYPT="m"
-	help
-	  Select this option if you want to have a single module z90crypt.ko
-	  that contains all parts of the crypto device driver (ap bus,
-	  request router and all the card drivers).
-
-endmenu
Index: quilt-2.6/drivers/s390/net/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/s390/net/Kconfig
+++ quilt-2.6/drivers/s390/net/Kconfig
@@ -3,7 +3,7 @@ menu "S/390 network device drivers"
 
 config LCS
 	tristate "Lan Channel Station Interface"
-	depends on NETDEVICES && (NET_ETHERNET || TR || FDDI)
+	depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
 	help
 	   Select this option if you want to use LCS networking  on IBM S/390
   	   or zSeries. This device driver supports Token Ring (IEEE 802.5),
@@ -13,7 +13,7 @@ config LCS
 
 config CTC
 	tristate "CTC device support"
-	depends on NETDEVICES
+	depends on CCW && NETDEVICES
 	help
 	  Select this option if you want to use channel-to-channel networking
 	  on IBM S/390 or zSeries. This device driver supports real CTC
@@ -42,7 +42,7 @@ config SMSGIUCV
 
 config CLAW
 	tristate "CLAW device support"
-	depends on NETDEVICES
+	depends on CCW && NETDEVICES
 	help
 	  This driver supports channel attached CLAW devices.
 	  CLAW is Common Link Access for Workstation.  Common devices
@@ -52,7 +52,7 @@ config CLAW
 
 config QETH
 	tristate "Gigabit Ethernet device support"
-	depends on NETDEVICES && IP_MULTICAST && QDIO
+	depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
 	help
 	  This driver supports the IBM S/390 and zSeries OSA Express adapters
 	  in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN
Index: quilt-2.6/include/asm-s390/param.h
===================================================================
--- quilt-2.6.orig/include/asm-s390/param.h
+++ quilt-2.6/include/asm-s390/param.h
@@ -10,7 +10,7 @@
 #define _ASMS390_PARAM_H
 
 #ifdef __KERNEL__
-# define HZ		100		/* Internal kernel timer frequency */
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
 # define USER_HZ	100		/* .. some user interfaces are in "ticks" */
 # define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
 #endif

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 14/15] Kconfig: no wireless on s390.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (12 preceding siblings ...)
  2007-05-10 13:52 ` [patch 13/15] Kconfig: use common Kconfig files " Martin Schwidefsky
@ 2007-05-10 13:52 ` Martin Schwidefsky
  2007-05-10 13:52 ` [patch 15/15] update default configuration Martin Schwidefsky
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:52 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: John W. Linville, Martin Schwidefsky

[-- Attachment #1: 105-kconfig-wlan.diff --]
[-- Type: text/plain, Size: 1021 bytes --]

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Hide the config menues for wireless on s390.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 drivers/net/wireless/Kconfig |    1 +
 net/Kconfig                  |    1 +
 2 files changed, 2 insertions(+)

Index: quilt-2.6/drivers/net/wireless/Kconfig
===================================================================
--- quilt-2.6.orig/drivers/net/wireless/Kconfig
+++ quilt-2.6/drivers/net/wireless/Kconfig
@@ -3,6 +3,7 @@
 #
 
 menu "Wireless LAN"
+	depends on !S390
 
 config WLAN_PRE80211
 	bool "Wireless LAN (pre-802.11)"
Index: quilt-2.6/net/Kconfig
===================================================================
--- quilt-2.6.orig/net/Kconfig
+++ quilt-2.6/net/Kconfig
@@ -218,6 +218,7 @@ config FIB_RULES
 	bool
 
 menu "Wireless"
+	depends on !S390
 
 source "net/wireless/Kconfig"
 source "net/mac80211/Kconfig"

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [patch 15/15] update default configuration.
  2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
                   ` (13 preceding siblings ...)
  2007-05-10 13:52 ` [patch 14/15] Kconfig: no wireless on s390 Martin Schwidefsky
@ 2007-05-10 13:52 ` Martin Schwidefsky
  14 siblings, 0 replies; 16+ messages in thread
From: Martin Schwidefsky @ 2007-05-10 13:52 UTC (permalink / raw)
  To: linux-kernel, linux-s390; +Cc: Martin Schwidefsky

[-- Attachment #1: 106-defconfig.diff --]
[-- Type: text/plain, Size: 9760 bytes --]

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 arch/s390/defconfig |  234 ++++++++++++++++++++++++++++------------------------
 1 file changed, 128 insertions(+), 106 deletions(-)

Index: quilt-2.6/arch/s390/defconfig
===================================================================
--- quilt-2.6.orig/arch/s390/defconfig
+++ quilt-2.6/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc1
-# Wed Feb 21 10:44:30 2007
+# Linux kernel version: 2.6.21
+# Thu May 10 15:18:19 2007
 #
 CONFIG_MMU=y
 CONFIG_ZONE_DMA=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_BUG=y
 CONFIG_NO_IOMEM=y
+CONFIG_NO_DMA=y
 CONFIG_S390=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -41,9 +42,11 @@ CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CPUSETS is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -60,12 +63,14 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -128,6 +133,14 @@ CONFIG_CHECK_STACK=y
 CONFIG_STACK_GUARD=256
 # CONFIG_WARN_STACK is not set
 CONFIG_ARCH_POPULATES_NODE_MAP=y
+
+#
+# Kernel preemption
+#
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -150,7 +163,6 @@ CONFIG_QDIO=y
 #
 # Misc
 #
-CONFIG_PREEMPT=y
 CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
@@ -163,6 +175,11 @@ CONFIG_PFAULT=y
 CONFIG_VIRT_TIMER=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 # CONFIG_APPLDATA_BASE is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
 CONFIG_NO_IDLE_HZ=y
 CONFIG_NO_IDLE_HZ_INIT=y
 CONFIG_S390_HYPFS_FS=y
@@ -177,7 +194,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -216,6 +232,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
@@ -240,7 +257,12 @@ CONFIG_IPV6_SIT=y
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
-# CONFIG_IP_SCTP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
 
 #
 # TIPC Configuration (EXPERIMENTAL)
@@ -263,9 +285,6 @@ CONFIG_IPV6_SIT=y
 #
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -308,11 +327,14 @@ CONFIG_NET_ESTIMATOR=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_RFKILL is not set
 # CONFIG_PCMCIA is not set
+CONFIG_CCW=y
+
+#
+# Device Drivers
+#
 
 #
 # Generic Driver Options
@@ -330,6 +352,37 @@ CONFIG_SYS_HYPERVISOR=y
 # CONFIG_CONNECTOR is not set
 
 #
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# S/390 block device drivers
+#
+CONFIG_BLK_DEV_XPRAM=m
+# CONFIG_DCSSBLK is not set
+CONFIG_DASD=y
+CONFIG_DASD_PROFILE=y
+CONFIG_DASD_ECKD=y
+CONFIG_DASD_FBA=y
+CONFIG_DASD_DIAG=y
+CONFIG_DASD_EER=y
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
@@ -356,6 +409,7 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -372,34 +426,6 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ZFCP=y
-CONFIG_CCW=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# S/390 block device drivers
-#
-CONFIG_BLK_DEV_XPRAM=m
-# CONFIG_DCSSBLK is not set
-CONFIG_DASD=y
-CONFIG_DASD_PROFILE=y
-CONFIG_DASD_ECKD=y
-CONFIG_DASD_FBA=y
-CONFIG_DASD_DIAG=y
-CONFIG_DASD_EER=y
-# CONFIG_ATA_OVER_ETH is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -421,56 +447,7 @@ CONFIG_DM_MIRROR=y
 CONFIG_DM_ZERO=y
 CONFIG_DM_MULTIPATH=y
 # CONFIG_DM_MULTIPATH_EMC is not set
-
-#
-# Character device drivers
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=2048
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-
-#
-# S/390 character device drivers
-#
-CONFIG_TN3270=y
-CONFIG_TN3270_TTY=y
-CONFIG_TN3270_FS=m
-CONFIG_TN3270_CONSOLE=y
-CONFIG_TN3215=y
-CONFIG_TN3215_CONSOLE=y
-CONFIG_CCW_CONSOLE=y
-CONFIG_SCLP_TTY=y
-CONFIG_SCLP_CONSOLE=y
-CONFIG_SCLP_VT220_TTY=y
-CONFIG_SCLP_VT220_CONSOLE=y
-CONFIG_SCLP_CPI=m
-CONFIG_S390_TAPE=m
-
-#
-# S/390 tape interface support
-#
-CONFIG_S390_TAPE_BLOCK=y
-
-#
-# S/390 tape hardware support
-#
-CONFIG_S390_TAPE_34XX=m
-# CONFIG_S390_TAPE_3590 is not set
-# CONFIG_VMLOGRDR is not set
-# CONFIG_VMCP is not set
-# CONFIG_MONREADER is not set
-CONFIG_MONWRITER=m
-
-#
-# Cryptographic devices
-#
-CONFIG_ZCRYPT=m
-# CONFIG_ZCRYPT_MONOLITHIC is not set
+# CONFIG_DM_DELAY is not set
 
 #
 # Network device support
@@ -482,10 +459,6 @@ CONFIG_EQUALIZER=m
 CONFIG_TUN=m
 
 #
-# PHY device support
-#
-
-#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -498,6 +471,7 @@ CONFIG_NET_ETHERNET=y
 #
 # Ethernet (10000 Mbit)
 #
+CONFIG_MLX4_DEBUG=y
 
 #
 # Token Ring devices
@@ -505,11 +479,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
 # Wan interfaces
 #
 # CONFIG_WAN is not set
@@ -537,6 +506,56 @@ CONFIG_CCWGROUP=y
 # CONFIG_NET_POLL_CONTROLLER is not set
 
 #
+# Character devices
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# S/390 character device drivers
+#
+CONFIG_TN3270=y
+CONFIG_TN3270_TTY=y
+CONFIG_TN3270_FS=m
+CONFIG_TN3270_CONSOLE=y
+CONFIG_TN3215=y
+CONFIG_TN3215_CONSOLE=y
+CONFIG_CCW_CONSOLE=y
+CONFIG_SCLP=y
+CONFIG_SCLP_TTY=y
+CONFIG_SCLP_CONSOLE=y
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
+CONFIG_SCLP_CPI=m
+CONFIG_S390_TAPE=m
+
+#
+# S/390 tape interface support
+#
+CONFIG_S390_TAPE_BLOCK=y
+
+#
+# S/390 tape hardware support
+#
+CONFIG_S390_TAPE_34XX=m
+# CONFIG_S390_TAPE_3590 is not set
+# CONFIG_VMLOGRDR is not set
+# CONFIG_VMCP is not set
+# CONFIG_MONREADER is not set
+CONFIG_MONWRITER=m
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -628,6 +647,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -658,6 +678,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
 
 #
 # Native Language Support
@@ -668,8 +689,6 @@ CONFIG_MSDOS_PARTITION=y
 # Distributed Lock Manager
 #
 CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
 # CONFIG_DLM_DEBUG is not set
 
 #
@@ -693,7 +712,6 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
@@ -729,12 +747,13 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -745,6 +764,7 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_DES is not set
 CONFIG_CRYPTO_FCRYPT=m
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -771,6 +791,8 @@ CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_DES_S390 is not set
 # CONFIG_CRYPTO_AES_S390 is not set
 CONFIG_S390_PRNG=m
+CONFIG_ZCRYPT=m
+# CONFIG_ZCRYPT_MONOLITHIC is not set
 
 #
 # Library routines

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2007-05-10 13:52 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-10 13:51 [patch 00/15] s390 patches for 2.6.22 Martin Schwidefsky
2007-05-10 13:51 ` [patch 01/15] fix subsystem removal fallout Martin Schwidefsky
2007-05-10 13:51 ` [patch 02/15] cio: Get rid of _ccw_device_get_device_number() Martin Schwidefsky
2007-05-10 13:51 ` [patch 03/15] cio: Make some structures and a function static Martin Schwidefsky
2007-05-10 13:51 ` [patch 04/15] monreader inlining cleanup Martin Schwidefsky
2007-05-10 13:51 ` [patch 05/15] dasd: Fix modular build Martin Schwidefsky
2007-05-10 13:51 ` [patch 06/15] Avoid sparse warnings Martin Schwidefsky
2007-05-10 13:51 ` [patch 07/15] qdio: re-add lost perf_stats.tl_runs change in qdio_handle_pci Martin Schwidefsky
2007-05-10 13:52 ` [patch 08/15] Avoid compile warning Martin Schwidefsky
2007-05-10 13:52 ` [patch 09/15] Kconfig: refine depends statements Martin Schwidefsky
2007-05-10 13:52 ` [patch 10/15] Kconfig: menus with depends on HAS_IOMEM Martin Schwidefsky
2007-05-10 13:52 ` [patch 11/15] Kconfig: unwanted menus for s390 Martin Schwidefsky
2007-05-10 13:52 ` [patch 12/15] Kconfig: common config options " Martin Schwidefsky
2007-05-10 13:52 ` [patch 13/15] Kconfig: use common Kconfig files " Martin Schwidefsky
2007-05-10 13:52 ` [patch 14/15] Kconfig: no wireless on s390 Martin Schwidefsky
2007-05-10 13:52 ` [patch 15/15] update default configuration Martin Schwidefsky

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.