From: Sam Ravnborg <sam@ravnborg.org>
To: Russell King <rmk@arm.linux.org.uk>,
linux-arm-kernel@lists.arm.linux.org.uk,
LKML <linux-kernel@vger.kernel.org>
Cc: sam@ravnborg.org
Subject: ARM: Section mismatch warnings
Date: Mon, 28 May 2007 18:32:53 +0200 [thread overview]
Message-ID: <20070528163253.GA29174@uranus.ravnborg.org> (raw)
Hi Russell.
I've been building all defconfigs for ARM on latest -linus tree
and got the following results with respect to section mismatch warnings.
Unpatched: 105 section mismatch warnings
Applied a path to ignore section mismatch warnings from variables named *_timer.
Result: 39 section mismatch warnings.
I will carry this patch in kbuild.git since it touches only modpost.c
39 looked like a managebale set of warnings so I took a closer look.
With patches that I will post as follow-up for this mail:
Result: 19 section mismatch warnings (where some are duplicates from more than one defconfig).
The remaining warnings are the following:
# This symbol is exported and marked __init.
# Eiteher drop the export or drop the __init marking.
o-arm-mx1ads/log.out:WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x80): Section mismatch: reference to .init.text:set_imx_fb_info (after '__ksymtab_set_imx_fb_info')
# These are all almost trivial if one knows the device-model. I did not know enough about the devicemodel to fix them.
# I suspect several symbols should NOT be marked __init since they are used in .add assignments and the like
# or mayby __Devinit since they are used only in HOTPLUG scenarios.
o-arm-ks8695/log.out:WARNING: arch/arm/mach-ks8695/built-in.o(.data+0x108): Section mismatch: reference to .init.text:micrel_pci_map_irq (after 'micrel_pci')
o-arm-lubbock/log.out:WARNING: drivers/built-in.o(.text+0x39f2c): Section mismatch: reference to .init.text:pcmcia_lubbock_init (between 'pcmcia_probe' and 'sa1111_pcmcia_socket_suspend')
o-arm-neponset/log.out:WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x1748): Section mismatch: reference to .init.text:sa1110_mb_disable (between 'neponset_init' and 'neponset_resume')
o-arm-neponset/log.out:WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x17ac): Section mismatch: reference to .init.data:devices (between 'neponset_init' and 'neponset_resume')
o-arm-neponset/log.out:WARNING: drivers/built-in.o(.text+0x4e0a8): Section mismatch: reference to .init.text:pcmcia_neponset_init (between 'pcmcia_probe' and 'sa1111_pcmcia_socket_suspend')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2410/built-in.o(.text+0x80): Section mismatch: reference to .init.data:s3c2410_dma_order (between 's3c2410_dma_add' and 's3c2410_pm_add')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2410/built-in.o(.text+0x84): Section mismatch: reference to .init.data:s3c2410_dma_sel (between 's3c2410_dma_add' and 's3c2410_pm_add')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2412/built-in.o(.text+0x738): Section mismatch: reference to .init.data:s3c2412_dma_sel (between 's3c2412_dma_add' and 's3c2412_pm_prepare')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2440/built-in.o(.text+0x4b8): Section mismatch: reference to .init.data:s3c2440_dma_order (between 's3c2440_dma_add' and 'anubis_nand_select')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2440/built-in.o(.text+0x4bc): Section mismatch: reference to .init.data:s3c2440_dma_sel (between 's3c2440_dma_add' and 'anubis_nand_select')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2443/built-in.o(.text+0x1ac): Section mismatch: reference to .init.text:s3c2443_add_sub (between 's3c2443_irq_add' and 's3c2443_irq_wdtac97_mask')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2443/built-in.o(.text+0x1c8): Section mismatch: reference to .init.text:s3c2443_add_sub (between 's3c2443_irq_add' and 's3c2443_irq_wdtac97_mask')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2443/built-in.o(.text+0x1e4): Section mismatch: reference to .init.text:s3c2443_add_sub (between 's3c2443_irq_add' and 's3c2443_irq_wdtac97_mask')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2443/built-in.o(.text+0x200): Section mismatch: reference to .init.text:s3c2443_add_sub (between 's3c2443_irq_add' and 's3c2443_irq_wdtac97_mask')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2443/built-in.o(.text+0x21c): Section mismatch: reference to .init.text:s3c2443_add_sub (between 's3c2443_irq_add' and 's3c2443_irq_wdtac97_mask')
o-arm-s3c2410/log.out:WARNING: arch/arm/mach-s3c2443/built-in.o(.text+0xf0c): Section mismatch: reference to .init.data:s3c2443_dma_sel (after 's3c2443_dma_add')
# Assembler stuff. It looked to me like __INIT was used wrongly but then I did not feel confident enough to patch it up - and I cannot test it.
o-arm-realview-smp/log.out:WARNING: arch/arm/vfp/built-in.o(.data+0x0): Section mismatch: reference to .init.text:vfp_testing_entry (between 'vfp_vector' and 'vfp_notifier_block')
o-arm-versatile/log.out:WARNING: arch/arm/vfp/built-in.o(.data+0x0): Section mismatch: reference to .init.text:vfp_testing_entry (between 'vfp_vector' and 'vfp_notifier_block')
Sam
next reply other threads:[~2007-05-28 16:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-28 16:32 Sam Ravnborg [this message]
2007-05-28 16:44 ` [PATCH] arm: fix section mismatch warnings Sam Ravnborg
2007-05-28 17:09 ` Russell King
2007-05-28 18:38 ` Sam Ravnborg
2007-05-28 17:04 ` ARM: Section " Russell King
2007-05-28 17:56 ` Andrew Victor
2007-05-28 18:36 ` Sam Ravnborg
2007-05-28 19:25 ` Russell King
2007-05-28 19:58 ` Sam Ravnborg
2007-05-28 20:25 ` Russell King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070528163253.GA29174@uranus.ravnborg.org \
--to=sam@ravnborg.org \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=rmk@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.