Remove obsolete board support

All of lore.kernel.org
 help / color / mirror / Atom feed

* Remove obsolete board support
@ 2007-06-11 13:08 Franck Bui-Huu
  2007-06-11 13:08 ` [PATCH 1/3] Remove MIPS ATLAS support Franck Bui-Huu
                   ` (3 more replies)
  0 siblings, 4 replies; 17+ messages in thread
From: Franck Bui-Huu @ 2007-06-11 13:08 UTC (permalink / raw)
  To: ralf; +Cc: linux-mips

Hi Ralf,

This patchset finishes to remove deprecated board support.

It should simplify a bit the hrtimer migration work.

Please consider,

		Franck

---

 arch/mips/Kconfig                           |   66 --
 arch/mips/Makefile                          |   31 -
 arch/mips/configs/atlas_defconfig           | 1481 ---------------------------
 arch/mips/configs/ocelot_c_defconfig        |  982 ------------------
 arch/mips/configs/sead_defconfig            |  651 ------------
 arch/mips/mips-boards/atlas/Makefile        |   20 -
 arch/mips/mips-boards/atlas/atlas_gdb.c     |   97 --
 arch/mips/mips-boards/atlas/atlas_int.c     |  271 -----
 arch/mips/mips-boards/atlas/atlas_setup.c   |   92 --
 arch/mips/mips-boards/generic/console.c     |   22 -
 arch/mips/mips-boards/generic/init.c        |   22 +-
 arch/mips/mips-boards/generic/reset.c       |   20 -
 arch/mips/mips-boards/generic/time.c        |   16 +-
 arch/mips/mips-boards/sead/Makefile         |   26 -
 arch/mips/mips-boards/sead/sead_int.c       |  117 ---
 arch/mips/mips-boards/sead/sead_setup.c     |   81 --
 arch/mips/momentum/ocelot_c/Makefile        |    8 -
 arch/mips/momentum/ocelot_c/cpci-irq.c      |  100 --
 arch/mips/momentum/ocelot_c/dbg_io.c        |  121 ---
 arch/mips/momentum/ocelot_c/irq.c           |  107 --
 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h |   61 --
 arch/mips/momentum/ocelot_c/platform.c      |  183 ----
 arch/mips/momentum/ocelot_c/prom.c          |  183 ----
 arch/mips/momentum/ocelot_c/reset.c         |   58 --
 arch/mips/momentum/ocelot_c/setup.c         |  362 -------
 arch/mips/momentum/ocelot_c/uart-irq.c      |   91 --
 arch/mips/pci/Makefile                      |    2 -
 arch/mips/pci/fixup-atlas.c                 |   91 --
 arch/mips/pci/fixup-ocelot-c.c              |   41 -
 arch/mips/pci/pci-ocelot-c.c                |  145 ---
 include/asm-mips/bootinfo.h                 |    2 +-
 include/asm-mips/mach-atlas/mc146818rtc.h   |   60 --
 include/asm-mips/mips-boards/atlas.h        |   80 --
 include/asm-mips/mips-boards/atlasint.h     |  115 ---
 include/asm-mips/mips-boards/generic.h      |   10 +-
 include/asm-mips/mips-boards/sead.h         |   36 -
 include/asm-mips/mips-boards/seadint.h      |   35 -
 include/asm-mips/serial.h                   |   26 -
 include/asm-mips/war.h                      |    6 +-
 39 files changed, 11 insertions(+), 5907 deletions(-)
 delete mode 100644 arch/mips/configs/atlas_defconfig
 delete mode 100644 arch/mips/configs/ocelot_c_defconfig
 delete mode 100644 arch/mips/configs/sead_defconfig
 delete mode 100644 arch/mips/mips-boards/atlas/Makefile
 delete mode 100644 arch/mips/mips-boards/atlas/atlas_gdb.c
 delete mode 100644 arch/mips/mips-boards/atlas/atlas_int.c
 delete mode 100644 arch/mips/mips-boards/atlas/atlas_setup.c
 delete mode 100644 arch/mips/mips-boards/sead/Makefile
 delete mode 100644 arch/mips/mips-boards/sead/sead_int.c
 delete mode 100644 arch/mips/mips-boards/sead/sead_setup.c
 delete mode 100644 arch/mips/momentum/ocelot_c/Makefile
 delete mode 100644 arch/mips/momentum/ocelot_c/cpci-irq.c
 delete mode 100644 arch/mips/momentum/ocelot_c/dbg_io.c
 delete mode 100644 arch/mips/momentum/ocelot_c/irq.c
 delete mode 100644 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
 delete mode 100644 arch/mips/momentum/ocelot_c/platform.c
 delete mode 100644 arch/mips/momentum/ocelot_c/prom.c
 delete mode 100644 arch/mips/momentum/ocelot_c/reset.c
 delete mode 100644 arch/mips/momentum/ocelot_c/setup.c
 delete mode 100644 arch/mips/momentum/ocelot_c/uart-irq.c
 delete mode 100644 arch/mips/pci/fixup-atlas.c
 delete mode 100644 arch/mips/pci/fixup-ocelot-c.c
 delete mode 100644 arch/mips/pci/pci-ocelot-c.c
 delete mode 100644 include/asm-mips/mach-atlas/mc146818rtc.h
 delete mode 100644 include/asm-mips/mips-boards/atlas.h
 delete mode 100644 include/asm-mips/mips-boards/atlasint.h
 delete mode 100644 include/asm-mips/mips-boards/sead.h
 delete mode 100644 include/asm-mips/mips-boards/seadint.h

^ permalink raw reply	[flat|nested] 17+ messages in thread

* [PATCH 1/3] Remove MIPS ATLAS support
  2007-06-11 13:08 Remove obsolete board support Franck Bui-Huu
@ 2007-06-11 13:08 ` Franck Bui-Huu
  2007-06-11 13:28   ` Maciej W. Rozycki
  2007-06-11 13:08 ` [PATCH 2/3] Remove MIPS SEAD support Franck Bui-Huu
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 17+ messages in thread
From: Franck Bui-Huu @ 2007-06-11 13:08 UTC (permalink / raw)
  To: ralf; +Cc: linux-mips

From: Franck Bui-Huu <fbuihuu@gmail.com>

Mips Atlas support is deprecated and scheduled for removal
since September 2006.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
---
 arch/mips/Kconfig                         |   29 -
 arch/mips/Makefile                        |   12 -
 arch/mips/configs/atlas_defconfig         | 1481 -----------------------------
 arch/mips/mips-boards/atlas/Makefile      |   20 -
 arch/mips/mips-boards/atlas/atlas_gdb.c   |   97 --
 arch/mips/mips-boards/atlas/atlas_int.c   |  271 ------
 arch/mips/mips-boards/atlas/atlas_setup.c |   92 --
 arch/mips/mips-boards/generic/console.c   |   11 +-
 arch/mips/mips-boards/generic/init.c      |   17 +-
 arch/mips/mips-boards/generic/reset.c     |   18 -
 arch/mips/mips-boards/generic/time.c      |    5 +-
 arch/mips/pci/Makefile                    |    1 -
 arch/mips/pci/fixup-atlas.c               |   91 --
 include/asm-mips/mach-atlas/mc146818rtc.h |   60 --
 include/asm-mips/mips-boards/atlas.h      |   80 --
 include/asm-mips/mips-boards/atlasint.h   |  115 ---
 include/asm-mips/war.h                    |    6 +-
 17 files changed, 8 insertions(+), 2398 deletions(-)
 delete mode 100644 arch/mips/configs/atlas_defconfig
 delete mode 100644 arch/mips/mips-boards/atlas/Makefile
 delete mode 100644 arch/mips/mips-boards/atlas/atlas_gdb.c
 delete mode 100644 arch/mips/mips-boards/atlas/atlas_int.c
 delete mode 100644 arch/mips/mips-boards/atlas/atlas_setup.c
 delete mode 100644 arch/mips/pci/fixup-atlas.c
 delete mode 100644 include/asm-mips/mach-atlas/mc146818rtc.h
 delete mode 100644 include/asm-mips/mips-boards/atlas.h
 delete mode 100644 include/asm-mips/mips-boards/atlasint.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c20cd90..3e1de55 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -140,35 +140,6 @@ config LASAT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
-config MIPS_ATLAS
-	bool "MIPS Atlas board"
-	select BOOT_ELF32
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select IRQ_CPU
-	select HW_HAS_PCI
-	select MIPS_BOARDS_GEN
-	select MIPS_BONITO64
-	select PCI_GT64XXX_PCI0
-	select MIPS_MSC
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_CPU_NEVADA
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
-	select SYS_SUPPORTS_SMARTMIPS
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  This enables support for the MIPS Technologies Atlas evaluation
-	  board.
-
 config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 2b19605..8ce1075 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -303,14 +303,6 @@ load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 core-$(CONFIG_MIPS_BOARDS_GEN)	+= arch/mips/mips-boards/generic/
 
 #
-# MIPS Atlas board
-#
-core-$(CONFIG_MIPS_ATLAS)	+= arch/mips/mips-boards/atlas/
-cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-atlas
-cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-mips
-load-$(CONFIG_MIPS_ATLAS)	+= 0xffffffff80100000
-
-#
 # MIPS Malta board
 #
 core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mips-boards/malta/
@@ -670,10 +662,6 @@ ifdef CONFIG_BOOT_ELF64
 all:	$(vmlinux-64)
 endif
 
-ifdef CONFIG_MIPS_ATLAS
-all:	vmlinux.srec
-endif
-
 ifdef CONFIG_MIPS_MALTA
 all:	vmlinux.srec
 endif
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
deleted file mode 100644
index 39e2513..0000000
--- a/arch/mips/configs/atlas_defconfig
+++ /dev/null
@@ -1,1481 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:27:35 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-CONFIG_MIPS_ATLAS=y
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_MIPS_BONITO64=y
-CONFIG_MIPS_MSC=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_GT64120=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
-
-#
-# SCSI low-level drivers
-#
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_LAN_SAA9730=y
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile
deleted file mode 100644
index d8dab75..0000000
--- a/arch/mips/mips-boards/atlas/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-
-obj-y			:= atlas_int.o atlas_setup.o
-obj-$(CONFIG_KGDB)	+= atlas_gdb.o
diff --git a/arch/mips/mips-boards/atlas/atlas_gdb.c b/arch/mips/mips-boards/atlas/atlas_gdb.c
deleted file mode 100644
index fb65280..0000000
--- a/arch/mips/mips-boards/atlas/atlas_gdb.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <asm/io.h>
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/saa9730_uart.h>
-
-#define INB(a)     inb((unsigned long)a)
-#define OUTB(x,a)  outb(x,(unsigned long)a)
-
-/*
- * This is the interface to the remote debugger stub
- * if the Philips part is used for the debug port,
- * called from the platform setup code.
- */
-void *saa9730_base = (void *)ATLAS_SAA9730_REG;
-
-static int saa9730_kgdb_active = 0;
-
-#define SAA9730_BAUDCLOCK(baud) (((ATLAS_SAA9730_BAUDCLOCK/(baud))/16)-1)
-
-int saa9730_kgdb_hook(int speed)
-{
-	int baudclock;
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-
-        /*
-         * Clear all interrupts
-         */
-	(void) INB(&kgdb_uart->Lsr);
-	(void) INB(&kgdb_uart->Msr);
-	(void) INB(&kgdb_uart->Thr_Rbr);
-	(void) INB(&kgdb_uart->Iir_Fcr);
-
-        /*
-         * Now, initialize the UART
-         */
-	/* 8 data bits, one stop bit, no parity */
-	OUTB(SAA9730_LCR_DATA8, &kgdb_uart->Lcr);
-
-	baudclock = SAA9730_BAUDCLOCK(speed);
-
-	OUTB((baudclock >> 16) & 0xff, &kgdb_uart->BaudDivMsb);
-	OUTB( baudclock        & 0xff, &kgdb_uart->BaudDivLsb);
-
-	/* Set RTS/DTR active */
-	OUTB(SAA9730_MCR_DTR | SAA9730_MCR_RTS, &kgdb_uart->Mcr);
-	saa9730_kgdb_active = 1;
-
-	return speed;
-}
-
-int saa9730_putDebugChar(char c)
-{
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-
-        if (!saa9730_kgdb_active) {     /* need to init device first */
-                return 0;
-        }
-
-        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_THRE))
-                ;
-	OUTB(c, &kgdb_uart->Thr_Rbr);
-
-        return 1;
-}
-
-char saa9730_getDebugChar(void)
-{
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-	char c;
-
-        if (!saa9730_kgdb_active) {     /* need to init device first */
-                return 0;
-        }
-        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_DR))
-                ;
-
-	c = INB(&kgdb_uart->Thr_Rbr);
-	return(c);
-}
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
deleted file mode 100644
index 9f49da9..0000000
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright (C) 1999, 2000, 2006  MIPS Technologies, Inc.
- *	All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Atlas board.
- *
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/kernel.h>
-
-#include <asm/gdb-stub.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/msc01_ic.h>
-
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-#include <asm/mips-boards/generic.h>
-
-static struct atlas_ictrl_regs *atlas_hw0_icregs;
-
-#if 0
-#define DEBUG_INT(x...) printk(x)
-#else
-#define DEBUG_INT(x...)
-#endif
-
-void disable_atlas_irq(unsigned int irq_nr)
-{
-	atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE);
-	iob();
-}
-
-void enable_atlas_irq(unsigned int irq_nr)
-{
-	atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE);
-	iob();
-}
-
-static void end_atlas_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_atlas_irq(irq);
-}
-
-static struct irq_chip atlas_irq_type = {
-	.name = "Atlas",
-	.ack = disable_atlas_irq,
-	.mask = disable_atlas_irq,
-	.mask_ack = disable_atlas_irq,
-	.unmask = enable_atlas_irq,
-	.eoi = enable_atlas_irq,
-	.end = end_atlas_irq,
-};
-
-static inline int ls1bit32(unsigned int x)
-{
-	int b = 31, s;
-
-	s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
-	s =  8; if (x <<  8 == 0) s = 0; b -= s; x <<= s;
-	s =  4; if (x <<  4 == 0) s = 0; b -= s; x <<= s;
-	s =  2; if (x <<  2 == 0) s = 0; b -= s; x <<= s;
-	s =  1; if (x <<  1 == 0) s = 0; b -= s;
-
-	return b;
-}
-
-static inline void atlas_hw0_irqdispatch(void)
-{
-	unsigned long int_status;
-	int irq;
-
-	int_status = atlas_hw0_icregs->intstatus;
-
-	/* if int_status == 0, then the interrupt has already been cleared */
-	if (unlikely(int_status == 0))
-		return;
-
-	irq = ATLAS_INT_BASE + ls1bit32(int_status);
-
-	DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq);
-
-	do_IRQ(irq);
-}
-
-static inline int clz(unsigned long x)
-{
-	__asm__ (
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = s0 & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0x8000;
-	t0 = t0 < 1;
-	//t0 = t0 << 2;
-	a0 = a0 - t0;
-	//s0 = s0 << t0;
-
-	return a0;
-#endif
-}
-
-/*
- * IRQs on the Atlas board look basically like (all external interrupt
- * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)):
- *
- *      MIPS IRQ        Source
- *      --------        ------
- *             0        Software 0 (reschedule IPI on MT)
- *             1        Software 1 (remote call IPI on MT)
- *             2        Combined Atlas hardware interrupt (hw0)
- *             3        Hardware (ignored)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Software 0
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq == MIPSCPU_INT_ATLAS)
-		atlas_hw0_irqdispatch();
-	else if (irq >= 0)
-		do_IRQ(MIPSCPU_INT_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-static inline void init_atlas_irqs (int base)
-{
-	int i;
-
-	atlas_hw0_icregs = (struct atlas_ictrl_regs *)
-			   ioremap(ATLAS_ICTRL_REGS_BASE,
-				   sizeof(struct atlas_ictrl_regs *));
-
-	/*
-	 * Mask out all interrupt by writing "1" to all bit position in
-	 * the interrupt reset reg.
-	 */
-	atlas_hw0_icregs->intrsten = 0xffffffff;
-
-	for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++)
-		set_irq_chip_and_handler(i, &atlas_irq_type, handle_level_irq);
-}
-
-static struct irqaction atlasirq = {
-	.handler = no_action,
-	.name = "Atlas cascade"
-};
-
-msc_irqmap_t __initdata msc_irqmap[] = {
-	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-};
-int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
-
-msc_irqmap_t __initdata msc_eicirqmap[] = {
-	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_ATLAS,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01E_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
-};
-int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
-
-void __init arch_init_irq(void)
-{
-	init_atlas_irqs(ATLAS_INT_BASE);
-
-	if (!cpu_has_veic)
-		mips_cpu_irq_init();
-
-	switch(mips_revision_corid) {
-	case MIPS_REVISION_CORID_CORE_MSC:
-	case MIPS_REVISION_CORID_CORE_FPGA2:
-	case MIPS_REVISION_CORID_CORE_FPGA3:
-	case MIPS_REVISION_CORID_CORE_24K:
-	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
-		if (cpu_has_veic)
-			init_msc_irqs (MSC01E_INT_BASE, MSC01E_INT_BASE,
-				       msc_eicirqmap, msc_nr_eicirqs);
-		else
-			init_msc_irqs (MSC01E_INT_BASE, MSC01C_INT_BASE,
-				       msc_irqmap, msc_nr_irqs);
-	}
-
-	if (cpu_has_veic) {
-		set_vi_handler (MSC01E_INT_ATLAS, atlas_hw0_irqdispatch);
-		setup_irq (MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq);
-	} else if (cpu_has_vint) {
-		set_vi_handler (MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch);
-#ifdef CONFIG_MIPS_MT_SMTC
-		setup_irq_smtc (MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS,
-				&atlasirq, (0x100 << MIPSCPU_INT_ATLAS));
-#else /* Not SMTC */
-		setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
-#endif /* CONFIG_MIPS_MT_SMTC */
-	} else
-		setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
-}
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
deleted file mode 100644
index 1cc6ebb..0000000
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-#include <asm/time.h>
-#include <asm/traps.h>
-
-extern void mips_reboot_setup(void);
-extern void mips_time_init(void);
-extern unsigned long mips_rtc_get_time(void);
-
-#ifdef CONFIG_KGDB
-extern void kgdb_config(void);
-#endif
-
-static void __init serial_init(void);
-
-const char *get_system_type(void)
-{
-	return "MIPS Atlas";
-}
-
-const char display_string[] = "        LINUX ON ATLAS       ";
-
-void __init plat_mem_setup(void)
-{
-	mips_pcibios_init();
-
-	ioport_resource.end = 0x7fffffff;
-
-	serial_init ();
-
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-	mips_reboot_setup();
-
-	board_time_init = mips_time_init;
-	rtc_mips_get_time = mips_rtc_get_time;
-}
-
-static void __init serial_init(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port s;
-
-	memset(&s, 0, sizeof(s));
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	s.iobase = ATLAS_UART_REGS_BASE;
-#else
-	s.iobase = ATLAS_UART_REGS_BASE+3;
-#endif
-	s.irq = ATLAS_INT_UART;
-	s.uartclk = ATLAS_BASE_BAUD * 16;
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
-	s.iotype = UPIO_PORT;
-	s.regshift = 3;
-
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial setup failed!\n");
-	}
-#endif
-}
diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c
index 4d8ab99..202fcee 100644
--- a/arch/mips/mips-boards/generic/console.c
+++ b/arch/mips/mips-boards/generic/console.c
@@ -22,16 +22,7 @@
 #include <linux/serial_reg.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlas.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define PORT(offset) (ATLAS_UART_REGS_BASE     + ((offset)<<3))
-#else
-#define PORT(offset) (ATLAS_UART_REGS_BASE + 3 + ((offset)<<3))
-#endif
-
-#elif defined(CONFIG_MIPS_SEAD)
+#ifdef CONFIG_MIPS_SEAD
 
 #include <asm/mips-boards/sead.h>
 
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index 4eabc1e..d6436a6 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -197,19 +197,10 @@ void __init kgdb_config (void)
 			while ((c = *++argptr) && ('0' <= c && c <= '9'))
 				speed = speed * 10 + c - '0';
 		}
-#ifdef CONFIG_MIPS_ATLAS
-		if (line == 1) {
-			speed = saa9730_kgdb_hook(speed);
-			generic_putDebugChar = saa9730_putDebugChar;
-			generic_getDebugChar = saa9730_getDebugChar;
-		}
-		else
-#endif
-		{
-			speed = rs_kgdb_hook(line, speed);
-			generic_putDebugChar = rs_putDebugChar;
-			generic_getDebugChar = rs_getDebugChar;
-		}
+
+		speed = rs_kgdb_hook(line, speed);
+		generic_putDebugChar = rs_putDebugChar;
+		generic_getDebugChar = rs_getDebugChar;
 
 		pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
 		        "session, please connect your debugger\n",
diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c
index 7a1bb51..f9ae162 100644
--- a/arch/mips/mips-boards/generic/reset.c
+++ b/arch/mips/mips-boards/generic/reset.c
@@ -27,15 +27,9 @@
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/mips-boards/generic.h>
-#if defined(CONFIG_MIPS_ATLAS)
-#include <asm/mips-boards/atlas.h>
-#endif
 
 static void mips_machine_restart(char *command);
 static void mips_machine_halt(void);
-#if defined(CONFIG_MIPS_ATLAS)
-static void atlas_machine_power_off(void);
-#endif
 
 static void mips_machine_restart(char *command)
 {
@@ -51,22 +45,10 @@ static void mips_machine_halt(void)
 	writew(GORESET, softres_reg);
 }
 
-#if defined(CONFIG_MIPS_ATLAS)
-static void atlas_machine_power_off(void)
-{
-	unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int));
-
-	writew(ATLAS_GOSTBY, psustby_reg);
-}
-#endif
-
 void mips_reboot_setup(void)
 {
 	_machine_restart = mips_machine_restart;
 	_machine_halt = mips_machine_halt;
-#if defined(CONFIG_MIPS_ATLAS)
-	pm_power_off = atlas_machine_power_off;
-#endif
 #if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
 	pm_power_off = mips_machine_halt;
 #endif
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 8f1000f..d7fe97f 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -41,9 +41,6 @@
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
 
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlasint.h>
-#endif
 #ifdef CONFIG_MIPS_MALTA
 #include <asm/mips-boards/maltaint.h>
 #endif
@@ -190,7 +187,7 @@ static unsigned int __init estimate_cpu_frequency(void)
 	else
 		count = 6000000;
 #endif
-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA)
+#ifdef CONFIG_MIPS_MALTA
 	unsigned long flags;
 	unsigned int start;
 
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index aba3dbf..ddb964e 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 obj-$(CONFIG_BASLER_EXCITE)	+= ops-titan.o pci-excite.o fixup-excite.o
 obj-$(CONFIG_DDB5477)		+= fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o
 obj-$(CONFIG_LASAT)		+= pci-lasat.o
-obj-$(CONFIG_MIPS_ATLAS)	+= fixup-atlas.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_MIPS_EV64120)	+= pci-ev64120.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
deleted file mode 100644
index c6cd6e9..0000000
--- a/arch/mips/pci/fixup-atlas.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2003, 2004  Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
- *	Author:	 Maciej W. Rozycki <macro@mips.com>
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/mips-boards/atlasint.h>
-
-#define PCIA		ATLAS_INT_PCIA
-#define PCIB		ATLAS_INT_PCIB
-#define PCIC		ATLAS_INT_PCIC
-#define PCID		ATLAS_INT_PCID
-#define INTA		ATLAS_INT_INTA
-#define INTB		ATLAS_INT_INTB
-#define ETH		ATLAS_INT_ETH
-#define INTC		ATLAS_INT_INTC
-#define SCSI		ATLAS_INT_SCSI
-#define INTD		ATLAS_INT_INTD
-
-static char irq_tab[][5] __initdata = {
-	/*      INTA    INTB    INTC    INTD */
-	{0,	0,	0,	0,	0 },	/*  0: Unused */
-	{0,	0,	0,	0,	0 },	/*  1: Unused */
-	{0,	0,	0,	0,	0 },	/*  2: Unused */
-	{0,	0,	0,	0,	0 },	/*  3: Unused */
-	{0,	0,	0,	0,	0 },	/*  4: Unused */
-	{0,	0,	0,	0,	0 },	/*  5: Unused */
-	{0,	0,	0,	0,	0 },	/*  6: Unused */
-	{0,	0,	0,	0,	0 },	/*  7: Unused */
-	{0,	0,	0,	0,	0 },	/*  8: Unused */
-	{0,	0,	0,	0,	0 },	/*  9: Unused */
-	{0,	0,	0,	0,	0 },	/* 10: Unused */
-	{0,	0,	0,	0,	0 },	/* 11: Unused */
-	{0,	0,	0,	0,	0 },	/* 12: Unused */
-	{0,	0,	0,	0,	0 },	/* 13: Unused */
-	{0,	0,	0,	0,	0 },	/* 14: Unused */
-	{0,	PCIA,	PCIB,	PCIC,	PCID },	/* 15: cPCI (behind 21150) */
-	{0,	SCSI,	0,	0,	0 },	/* 16: SYM53C810A SCSI */
-	{0,	0,	0,	0,	0 },	/* 17: Core */
-	{0,	INTA,	INTB,	INTC,	INTD },	/* 18: PCI Slot */
-	{0,	ETH,	0,	0,	0 },	/* 19: SAA9730 Eth. et al. */
-	{0,	0,	0,	0,	0 },	/* 20: Unused */
-	{0,	0,	0,	0,	0 }	/* 21: Unused */
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return irq_tab[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-#ifdef CONFIG_KGDB
-/*
- * The PCI scan may have moved the saa9730 I/O address, so reread
- * the address here.
- * This does mean that it's not possible to debug the PCI bus configuration
- * code, but it is better than nothing...
- */
-
-static void atlas_saa9730_base_fixup (struct pci_dev *pdev)
-{
-	extern void *saa9730_base;
-	if (pdev->bus == 0 && PCI_SLOT(pdev->devfn) == 19)
-		(void) pci_read_config_dword (pdev, 0x14, (u32 *)&saa9730_base);
-	printk ("saa9730_base = %x\n", saa9730_base);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730,
-	 atlas_saa9730_base_fixup);
-
-#endif
diff --git a/include/asm-mips/mach-atlas/mc146818rtc.h b/include/asm-mips/mach-atlas/mc146818rtc.h
deleted file mode 100644
index 51d337e..0000000
--- a/include/asm-mips/mach-atlas/mc146818rtc.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 1999, 2000, 2005  MIPS Technologies, Inc.
- *	All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- * Copyright (C) 2003, 05 Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#ifndef __ASM_MACH_ATLAS_MC146818RTC_H
-#define __ASM_MACH_ATLAS_MC146818RTC_H
-
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-
-#define ARCH_RTC_LOCATION
-
-#define RTC_PORT(x)	(ATLAS_RTC_ADR_REG + (x) * 8)
-#define RTC_IO_EXTENT	0x100
-#define RTC_IOMAPPED	0
-#define RTC_IRQ		ATLAS_INT_RTC
-
-static inline unsigned char CMOS_READ(unsigned long addr)
-{
-	volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0));
-	volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1));
-
-	*ireg = addr;
-	return *dreg;
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
-{
-	volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0));
-	volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1));
-
-	*ireg = addr;
-	*dreg = data;
-}
-
-#define RTC_ALWAYS_BCD	0
-
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
-
-#endif /* __ASM_MACH_ATLAS_MC146818RTC_H */
diff --git a/include/asm-mips/mips-boards/atlas.h b/include/asm-mips/mips-boards/atlas.h
deleted file mode 100644
index a8ae12d..0000000
--- a/include/asm-mips/mips-boards/atlas.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Defines of the Atlas board specific address-MAP, registers, etc.
- *
- */
-#ifndef _MIPS_ATLAS_H
-#define _MIPS_ATLAS_H
-
-#include <asm/addrspace.h>
-
-/*
- * Atlas RTC-device indirect register access.
- */
-#define ATLAS_RTC_ADR_REG       0x1f000800
-#define ATLAS_RTC_DAT_REG       0x1f000808
-
-/*
- * Atlas interrupt controller register base.
- */
-#define ATLAS_ICTRL_REGS_BASE   0x1f000000
-
-/*
- * Atlas registers are memory mapped on 64-bit aligned boundaries and
- * only word access are allowed.
- */
-struct atlas_ictrl_regs {
-	volatile unsigned int intraw;
-	int dummy1;
-	volatile unsigned int intseten;
-	int dummy2;
-	volatile unsigned int intrsten;
-	int dummy3;
-	volatile unsigned int intenable;
-	int dummy4;
-	volatile unsigned int intstatus;
-	int dummy5;
-};
-
-/*
- * Atlas UART register base.
- */
-#define ATLAS_UART_REGS_BASE    0x1f000900
-#define ATLAS_BASE_BAUD ( 3686400 / 16 )
-
-/*
- * Atlas PSU standby register.
- */
-#define ATLAS_PSUSTBY_REG       0x1f000600
-#define ATLAS_GOSTBY            0x4d
-
-/*
- * We make a universal assumption about the way the bootloader (YAMON)
- * have located the Philips SAA9730 chip.
- * This is not ideal, but is needed for setting up remote debugging as
- * soon as possible.
- */
-#define ATLAS_SAA9730_REG	0x10800000
-
-#define ATLAS_SAA9730_BAUDCLOCK	3692300
-
-#endif /* !(_MIPS_ATLAS_H) */
diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h
deleted file mode 100644
index 76add42..0000000
--- a/include/asm-mips/mips-boards/atlasint.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright (C) 1999, 2006  MIPS Technologies, Inc.  All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Defines for the Atlas interrupt controller.
- *
- */
-#ifndef _MIPS_ATLASINT_H
-#define _MIPS_ATLASINT_H
-
-#include <irq.h>
-
-/*
- * Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
- */
-#define MIPSCPU_INT_BASE	MIPS_CPU_IRQ_BASE
-
-/* CPU interrupt offsets */
-#define MIPSCPU_INT_SW0		0
-#define MIPSCPU_INT_SW1		1
-#define MIPSCPU_INT_MB0		2
-#define MIPSCPU_INT_ATLAS	MIPSCPU_INT_MB0
-#define MIPSCPU_INT_MB1		3
-#define MIPSCPU_INT_MB2		4
-#define MIPSCPU_INT_MB3		5
-#define MIPSCPU_INT_MB4		6
-#define MIPSCPU_INT_CPUCTR	7
-
-/*
- * Interrupts 8..39 are used for Atlas interrupt controller interrupts
- */
-#define ATLAS_INT_BASE		8
-#define ATLAS_INT_UART		(ATLAS_INT_BASE + 0)
-#define ATLAS_INT_TIM0		(ATLAS_INT_BASE + 1)
-#define ATLAS_INT_RES2		(ATLAS_INT_BASE + 2)
-#define ATLAS_INT_RES3		(ATLAS_INT_BASE + 3)
-#define ATLAS_INT_RTC		(ATLAS_INT_BASE + 4)
-#define ATLAS_INT_COREHI	(ATLAS_INT_BASE + 5)
-#define ATLAS_INT_CORELO	(ATLAS_INT_BASE + 6)
-#define ATLAS_INT_RES7		(ATLAS_INT_BASE + 7)
-#define ATLAS_INT_PCIA		(ATLAS_INT_BASE + 8)
-#define ATLAS_INT_PCIB		(ATLAS_INT_BASE + 9)
-#define ATLAS_INT_PCIC		(ATLAS_INT_BASE + 10)
-#define ATLAS_INT_PCID		(ATLAS_INT_BASE + 11)
-#define ATLAS_INT_ENUM		(ATLAS_INT_BASE + 12)
-#define ATLAS_INT_DEG		(ATLAS_INT_BASE + 13)
-#define ATLAS_INT_ATXFAIL	(ATLAS_INT_BASE + 14)
-#define ATLAS_INT_INTA		(ATLAS_INT_BASE + 15)
-#define ATLAS_INT_INTB		(ATLAS_INT_BASE + 16)
-#define ATLAS_INT_ETH		ATLAS_INT_INTB
-#define ATLAS_INT_INTC		(ATLAS_INT_BASE + 17)
-#define ATLAS_INT_SCSI		ATLAS_INT_INTC
-#define ATLAS_INT_INTD		(ATLAS_INT_BASE + 18)
-#define ATLAS_INT_SERR		(ATLAS_INT_BASE + 19)
-#define ATLAS_INT_RES20		(ATLAS_INT_BASE + 20)
-#define ATLAS_INT_RES21		(ATLAS_INT_BASE + 21)
-#define ATLAS_INT_RES22		(ATLAS_INT_BASE + 22)
-#define ATLAS_INT_RES23		(ATLAS_INT_BASE + 23)
-#define ATLAS_INT_RES24		(ATLAS_INT_BASE + 24)
-#define ATLAS_INT_RES25		(ATLAS_INT_BASE + 25)
-#define ATLAS_INT_RES26		(ATLAS_INT_BASE + 26)
-#define ATLAS_INT_RES27		(ATLAS_INT_BASE + 27)
-#define ATLAS_INT_RES28		(ATLAS_INT_BASE + 28)
-#define ATLAS_INT_RES29		(ATLAS_INT_BASE + 29)
-#define ATLAS_INT_RES30		(ATLAS_INT_BASE + 30)
-#define ATLAS_INT_RES31		(ATLAS_INT_BASE + 31)
-#define ATLAS_INT_END		(ATLAS_INT_BASE + 31)
-
-/*
- * Interrupts 64..127 are used for Soc-it Classic interrupts
- */
-#define MSC01C_INT_BASE		64
-
-/* SOC-it Classic interrupt offsets */
-#define MSC01C_INT_TMR		0
-#define MSC01C_INT_PCI		1
-
-/*
- * Interrupts 64..127 are used for Soc-it EIC interrupts
- */
-#define MSC01E_INT_BASE		64
-
-/* SOC-it EIC interrupt offsets */
-#define	MSC01E_INT_SW0		1
-#define	MSC01E_INT_SW1		2
-#define	MSC01E_INT_MB0		3
-#define	MSC01E_INT_ATLAS	MSC01E_INT_MB0
-#define	MSC01E_INT_MB1		4
-#define	MSC01E_INT_MB2		5
-#define	MSC01E_INT_MB3		6
-#define	MSC01E_INT_MB4		7
-#define	MSC01E_INT_TMR		8
-#define	MSC01E_INT_PCI		9
-#define	MSC01E_INT_PERFCTR	10
-#define	MSC01E_INT_CPUCTR	11
-
-#endif /* !(_MIPS_ATLASINT_H) */
diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h
index 13a3502..a37a237 100644
--- a/include/asm-mips/war.h
+++ b/include/asm-mips/war.h
@@ -131,8 +131,7 @@
  * Affects:
  *  MIPS 4K		RTL revision <3.0, PRID revision <4
  */
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) || \
-    defined(CONFIG_MIPS_SEAD)
+#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
 #define MIPS4K_ICACHE_REFILL_WAR 1
 #endif
 
@@ -151,8 +150,7 @@
  *   MIPS 5Kc,5Kf	RTL revision <2.3, PRID revision <8
  *   MIPS 20Kc		RTL revision <4.0, PRID revision <?
  */
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) || \
-    defined(CONFIG_MIPS_SEAD)
+#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
 #define MIPS_CACHE_SYNC_WAR 1
 #endif
 
-- 
1.5.2.1

^ permalink raw reply related	[flat|nested] 17+ messages in thread

* Re: [PATCH 1/3] Remove MIPS ATLAS support
  2007-06-11 13:08 ` [PATCH 1/3] Remove MIPS ATLAS support Franck Bui-Huu
@ 2007-06-11 13:28   ` Maciej W. Rozycki
  0 siblings, 0 replies; 17+ messages in thread
From: Maciej W. Rozycki @ 2007-06-11 13:28 UTC (permalink / raw)
  To: Franck Bui-Huu; +Cc: ralf, linux-mips

On Mon, 11 Jun 2007, Franck Bui-Huu wrote:

> Mips Atlas support is deprecated and scheduled for removal
> since September 2006.

 Ditto.

  Maciej

^ permalink raw reply	[flat|nested] 17+ messages in thread

* [PATCH 2/3] Remove MIPS SEAD support
  2007-06-11 13:08 Remove obsolete board support Franck Bui-Huu
  2007-06-11 13:08 ` [PATCH 1/3] Remove MIPS ATLAS support Franck Bui-Huu
@ 2007-06-11 13:08 ` Franck Bui-Huu
  2007-06-11 13:27   ` Maciej W. Rozycki
  2007-06-11 13:08 ` [PATCH 3/3] Remove Momenco Ocelot C support Franck Bui-Huu
  2007-06-11 13:30 ` Remove obsolete board support Ralf Baechle
  3 siblings, 1 reply; 17+ messages in thread
From: Franck Bui-Huu @ 2007-06-11 13:08 UTC (permalink / raw)
  To: ralf; +Cc: linux-mips

From: Franck Bui-Huu <fbuihuu@gmail.com>

Mips Sead support is deprecated and scheduled for removal
since September 2006.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
---
 arch/mips/Kconfig                       |   19 -
 arch/mips/Makefile                      |   11 -
 arch/mips/configs/sead_defconfig        |  651 -------------------------------
 arch/mips/mips-boards/generic/console.c |   13 -
 arch/mips/mips-boards/generic/init.c    |    5 +-
 arch/mips/mips-boards/generic/reset.c   |    2 -
 arch/mips/mips-boards/generic/time.c    |   11 +-
 arch/mips/mips-boards/sead/Makefile     |   26 --
 arch/mips/mips-boards/sead/sead_int.c   |  117 ------
 arch/mips/mips-boards/sead/sead_setup.c |   81 ----
 include/asm-mips/mips-boards/generic.h  |   10 +-
 include/asm-mips/mips-boards/sead.h     |   36 --
 include/asm-mips/mips-boards/seadint.h  |   35 --
 include/asm-mips/war.h                  |    4 +-
 14 files changed, 5 insertions(+), 1016 deletions(-)
 delete mode 100644 arch/mips/configs/sead_defconfig
 delete mode 100644 arch/mips/mips-boards/sead/Makefile
 delete mode 100644 arch/mips/mips-boards/sead/sead_int.c
 delete mode 100644 arch/mips/mips-boards/sead/sead_setup.c
 delete mode 100644 include/asm-mips/mips-boards/sead.h
 delete mode 100644 include/asm-mips/mips-boards/seadint.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3e1de55..731b438 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -172,25 +172,6 @@ config MIPS_MALTA
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
 
-config MIPS_SEAD
-	bool "MIPS SEAD board (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	select IRQ_CPU
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select MIPS_BOARDS_GEN
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_SMARTMIPS
-	help
-	  This enables support for the MIPS Technologies SEAD evaluation
-	  board.
-
 config WR_PPMC
 	bool "Wind River PPMC board"
 	select IRQ_CPU
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 8ce1075..1f0fb74 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -310,13 +310,6 @@ cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-mips
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
 
 #
-# MIPS SEAD board
-#
-core-$(CONFIG_MIPS_SEAD)	+= arch/mips/mips-boards/sead/
-cflags-$(CONFIG_MIPS_SEAD)	+= -Iinclude/asm-mips/mach-mips
-load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
-
-#
 # MIPS SIM
 #
 core-$(CONFIG_MIPS_SIM)		+= arch/mips/mips-boards/sim/
@@ -666,10 +659,6 @@ ifdef CONFIG_MIPS_MALTA
 all:	vmlinux.srec
 endif
 
-ifdef CONFIG_MIPS_SEAD
-all:	vmlinux.srec
-endif
-
 ifdef CONFIG_QEMU
 all:	vmlinux.bin
 endif
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
deleted file mode 100644
index 988b9cd..0000000
--- a/arch/mips/configs/sead_defconfig
+++ /dev/null
@@ -1,651 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:28:10 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_SEAD=y
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=18432
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c
index 202fcee..17a2a0a 100644
--- a/arch/mips/mips-boards/generic/console.c
+++ b/arch/mips/mips-boards/generic/console.c
@@ -22,21 +22,8 @@
 #include <linux/serial_reg.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_MIPS_SEAD
-
-#include <asm/mips-boards/sead.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define PORT(offset) (SEAD_UART0_REGS_BASE     + ((offset)<<3))
-#else
-#define PORT(offset) (SEAD_UART0_REGS_BASE + 3 + ((offset)<<3))
-#endif
-
-#else
-
 #define PORT(offset) (0x3f8 + (offset))
 
-#endif
 
 static inline unsigned int serial_in(int offset)
 {
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index d6436a6..c110490 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -249,9 +249,6 @@ void __init prom_init(void)
 
 	mips_display_message("LINUX");
 
-#ifdef CONFIG_MIPS_SEAD
-	set_io_port_base(KSEG1);
-#else
 	/*
 	 * early setup of _pcictrl_bonito so that we can determine
 	 * the system controller on a CORE_EMUL board
@@ -396,7 +393,7 @@ void __init prom_init(void)
 		mips_display_message("SC Error");
 		while (1);   /* We die here... */
 	}
-#endif
+
 	board_nmi_handler_setup = mips_nmi_setup;
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c
index f9ae162..6a14da7 100644
--- a/arch/mips/mips-boards/generic/reset.c
+++ b/arch/mips/mips-boards/generic/reset.c
@@ -49,7 +49,5 @@ void mips_reboot_setup(void)
 {
 	_machine_restart = mips_machine_restart;
 	_machine_halt = mips_machine_halt;
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
 	pm_power_off = mips_machine_halt;
-#endif
 }
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index d7fe97f..bd5021d 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -44,9 +44,6 @@
 #ifdef CONFIG_MIPS_MALTA
 #include <asm/mips-boards/maltaint.h>
 #endif
-#ifdef CONFIG_MIPS_SEAD
-#include <asm/mips-boards/seadint.h>
-#endif
 
 unsigned long cpu_khz;
 
@@ -174,13 +171,7 @@ static unsigned int __init estimate_cpu_frequency(void)
 	unsigned int prid = read_c0_prid() & 0xffff00;
 	unsigned int count;
 
-#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM)
-	/*
-	 * The SEAD board doesn't have a real time clock, so we can't
-	 * really calculate the timer frequency
-	 * For now we hardwire the SEAD board frequency to 12MHz.
-	 */
-
+#if defined(CONFIG_MIPS_SIM)
 	if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
 	    (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
 		count = 12000000;
diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile
deleted file mode 100644
index 224bb84..0000000
--- a/arch/mips/mips-boards/sead/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
-#
-# ########################################################################
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# #######################################################################
-#
-# Makefile for the MIPS SEAD specific kernel interface routines
-# under Linux.
-#
-
-obj-y		:= sead_int.o sead_setup.o
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
deleted file mode 100644
index c4b9de3..0000000
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2004  Maciej W. Rozycki
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Sead board.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/mips-boards/seadint.h>
-
-static inline int clz(unsigned long x)
-{
-	__asm__ (
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = s0 & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0x8000;
-	t0 = t0 < 1;
-	//t0 = t0 << 2;
-	a0 = a0 - t0;
-	//s0 = s0 << t0;
-
-	return a0;
-#endif
-}
-
-/*
- * IRQs on the SEAD board look basically are combined together on hardware
- * interrupt 0 (MIPS IRQ 2)) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        UART0 (hw0)
- *             3        UART1 (hw1)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq >= 0)
-		do_IRQ(MIPSCPU_INT_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
-	mips_cpu_irq_init();
-}
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
deleted file mode 100644
index 811aba1..0000000
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * SEAD specific setup.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/sead.h>
-#include <asm/mips-boards/seadint.h>
-#include <asm/time.h>
-
-extern void mips_reboot_setup(void);
-extern void mips_time_init(void);
-
-static void __init serial_init(void);
-
-const char *get_system_type(void)
-{
-	return "MIPS SEAD";
-}
-
-const char display_string[] = "        LINUX ON SEAD       ";
-
-void __init plat_mem_setup(void)
-{
-	ioport_resource.end = 0x7fffffff;
-
-	serial_init ();
-
-	board_time_init = mips_time_init;
-
-	mips_reboot_setup();
-}
-
-static void __init serial_init(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port s;
-
-	memset(&s, 0, sizeof(s));
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	s.iobase = SEAD_UART0_REGS_BASE;
-#else
-	s.iobase = SEAD_UART0_REGS_BASE+3;
-#endif
-	s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
-	s.uartclk = SEAD_BASE_BAUD * 16;
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
-	s.iotype = UPIO_PORT;
-	s.regshift = 3;
-
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial setup failed!\n");
-	}
-#endif
-}
diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h
index c8ebcc3..ab88e8c 100644
--- a/include/asm-mips/mips-boards/generic.h
+++ b/include/asm-mips/mips-boards/generic.h
@@ -27,12 +27,8 @@
 /*
  * Display register base.
  */
-#ifdef CONFIG_MIPS_SEAD
-#define ASCII_DISPLAY_POS_BASE     0x1f0005c0
-#else
 #define ASCII_DISPLAY_WORD_BASE    0x1f000410
 #define ASCII_DISPLAY_POS_BASE     0x1f000418
-#endif
 
 
 /*
@@ -44,13 +40,9 @@
 /*
  * Reset register.
  */
-#ifdef CONFIG_MIPS_SEAD
-#define SOFTRES_REG       0x1e800050
-#define GORESET           0x4d
-#else
 #define SOFTRES_REG       0x1f000500
 #define GORESET           0x42
-#endif
+
 
 /*
  * Revision register.
diff --git a/include/asm-mips/mips-boards/sead.h b/include/asm-mips/mips-boards/sead.h
deleted file mode 100644
index 68c69de..0000000
--- a/include/asm-mips/mips-boards/sead.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Defines of the SEAD board specific address-MAP, registers, etc.
- *
- */
-#ifndef _MIPS_SEAD_H
-#define _MIPS_SEAD_H
-
-#include <asm/addrspace.h>
-
-/*
- * SEAD UART register base.
- */
-#define SEAD_UART0_REGS_BASE    (0x1f000800)
-#define SEAD_BASE_BAUD ( 3686400 / 16 )
-
-#endif /* !(_MIPS_SEAD_H) */
diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h
deleted file mode 100644
index 4f6a393..0000000
--- a/include/asm-mips/mips-boards/seadint.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Defines for the SEAD interrupt controller.
- */
-#ifndef _MIPS_SEADINT_H
-#define _MIPS_SEADINT_H
-
-#include <irq.h>
-
-/*
- * Interrupts 0..7 are used for SEAD CPU interrupts
- */
-#define MIPSCPU_INT_BASE	MIPS_CPU_IRQ_BASE
-
-#define MIPSCPU_INT_UART0	2
-#define MIPSCPU_INT_UART1	3
-
-#define MIPSCPU_INT_CPUCTR	7
-
-#endif /* !(_MIPS_SEADINT_H) */
diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h
index a37a237..0a0d7b9 100644
--- a/include/asm-mips/war.h
+++ b/include/asm-mips/war.h
@@ -131,7 +131,7 @@
  * Affects:
  *  MIPS 4K		RTL revision <3.0, PRID revision <4
  */
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
+#if defined(CONFIG_MIPS_MALTA)
 #define MIPS4K_ICACHE_REFILL_WAR 1
 #endif
 
@@ -150,7 +150,7 @@
  *   MIPS 5Kc,5Kf	RTL revision <2.3, PRID revision <8
  *   MIPS 20Kc		RTL revision <4.0, PRID revision <?
  */
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
+#if defined(CONFIG_MIPS_MALTA)
 #define MIPS_CACHE_SYNC_WAR 1
 #endif
 
-- 
1.5.2.1

^ permalink raw reply related	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/3] Remove MIPS SEAD support
  2007-06-11 13:08 ` [PATCH 2/3] Remove MIPS SEAD support Franck Bui-Huu
@ 2007-06-11 13:27   ` Maciej W. Rozycki
  2007-06-11 13:31       ` Kevin D. Kissell
                       ` (2 more replies)
  0 siblings, 3 replies; 17+ messages in thread
From: Maciej W. Rozycki @ 2007-06-11 13:27 UTC (permalink / raw)
  To: Franck Bui-Huu; +Cc: ralf, linux-mips

On Mon, 11 Jun 2007, Franck Bui-Huu wrote:

> Mips Sead support is deprecated and scheduled for removal
> since September 2006.

 Oh, is it?  The last time I tried it worked.  Have you tried it and 
failed to build?  That should be easy to fix.

  Maciej

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/3] Remove MIPS SEAD support
@ 2007-06-11 13:31       ` Kevin D. Kissell
  0 siblings, 0 replies; 17+ messages in thread
From: Kevin D. Kissell @ 2007-06-11 13:31 UTC (permalink / raw)
  To: Maciej W. Rozycki, Franck Bui-Huu; +Cc: ralf, linux-mips

> On Mon, 11 Jun 2007, Franck Bui-Huu wrote:
> 
> > Mips Sead support is deprecated and scheduled for removal
> > since September 2006.
> 
>  Oh, is it?  The last time I tried it worked.  Have you tried it and 
> failed to build?  That should be easy to fix.

There aren't that many SEAD users out there, but then again, no
replacement platform for SEAD has been announced, so I'm not 
wildly enthusiastic about deleting support for it, if it still works.

            Regards,

            Kevin K.

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/3] Remove MIPS SEAD support
@ 2007-06-11 13:31       ` Kevin D. Kissell
  0 siblings, 0 replies; 17+ messages in thread
From: Kevin D. Kissell @ 2007-06-11 13:31 UTC (permalink / raw)
  To: Maciej W. Rozycki, Franck Bui-Huu; +Cc: ralf, linux-mips

> On Mon, 11 Jun 2007, Franck Bui-Huu wrote:
> 
> > Mips Sead support is deprecated and scheduled for removal
> > since September 2006.
> 
>  Oh, is it?  The last time I tried it worked.  Have you tried it and 
> failed to build?  That should be easy to fix.

There aren't that many SEAD users out there, but then again, no
replacement platform for SEAD has been announced, so I'm not 
wildly enthusiastic about deleting support for it, if it still works.

            Regards,

            Kevin K.

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/3] Remove MIPS SEAD support
  2007-06-11 13:31       ` Kevin D. Kissell
  (?)
@ 2007-06-11 13:35       ` Maciej W. Rozycki
  -1 siblings, 0 replies; 17+ messages in thread
From: Maciej W. Rozycki @ 2007-06-11 13:35 UTC (permalink / raw)
  To: Kevin D. Kissell; +Cc: Franck Bui-Huu, ralf, linux-mips

On Mon, 11 Jun 2007, Kevin D. Kissell wrote:

> There aren't that many SEAD users out there, but then again, no
> replacement platform for SEAD has been announced, so I'm not 
> wildly enthusiastic about deleting support for it, if it still works.

 Any breakage possible should be minimal -- there is not too much to break 
there. ;-)  I am not sure if I find a couple of minutes to check it 
though...

  Maciej

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/3] Remove MIPS SEAD support
  2007-06-11 13:31       ` Kevin D. Kissell
  (?)
  (?)
@ 2007-06-11 13:35       ` Ralf Baechle
  -1 siblings, 0 replies; 17+ messages in thread
From: Ralf Baechle @ 2007-06-11 13:35 UTC (permalink / raw)
  To: Kevin D. Kissell; +Cc: Maciej W. Rozycki, Franck Bui-Huu, linux-mips

On Mon, Jun 11, 2007 at 03:31:16PM +0200, Kevin D. Kissell wrote:

> > > Mips Sead support is deprecated and scheduled for removal
> > > since September 2006.
> > 
> >  Oh, is it?  The last time I tried it worked.  Have you tried it and 
> > failed to build?  That should be easy to fix.
> 
> There aren't that many SEAD users out there, but then again, no
> replacement platform for SEAD has been announced, so I'm not 
> wildly enthusiastic about deleting support for it, if it still works.

It's relativly trivial to keep alive - like all the others in this
series.  Actuall the Atlas is probably the most problematic due to its
heart, the amazingly broken SAA9730 which I think I've also never seen
docs beyond a useless leaflet for.

  Ralf

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/3] Remove MIPS SEAD support
  2007-06-11 13:27   ` Maciej W. Rozycki
  2007-06-11 13:31       ` Kevin D. Kissell
@ 2007-06-11 13:53     ` Ralf Baechle
  2007-06-11 14:12     ` Franck Bui-Huu
  2 siblings, 0 replies; 17+ messages in thread
From: Ralf Baechle @ 2007-06-11 13:53 UTC (permalink / raw)
  To: Maciej W. Rozycki; +Cc: Franck Bui-Huu, linux-mips

On Mon, Jun 11, 2007 at 02:27:02PM +0100, Maciej W. Rozycki wrote:

>  Oh, is it?  The last time I tried it worked.  Have you tried it and 
> failed to build?  That should be easy to fix.

According to the latest auto-builder report it's building fine, just
like Atlas.

  Ralf

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/3] Remove MIPS SEAD support
  2007-06-11 13:27   ` Maciej W. Rozycki
  2007-06-11 13:31       ` Kevin D. Kissell
  2007-06-11 13:53     ` Ralf Baechle
@ 2007-06-11 14:12     ` Franck Bui-Huu
  2 siblings, 0 replies; 17+ messages in thread
From: Franck Bui-Huu @ 2007-06-11 14:12 UTC (permalink / raw)
  To: Maciej W. Rozycki; +Cc: ralf, linux-mips

Hi,

On 6/11/07, Maciej W. Rozycki <macro@linux-mips.org> wrote:
> On Mon, 11 Jun 2007, Franck Bui-Huu wrote:
>
> > Mips Sead support is deprecated and scheduled for removal
> > since September 2006.
>
>  Oh, is it?  The last time I tried it worked.  Have you tried it and
> failed to build?  That should be easy to fix.
>

Well I haven't tried to build it. I only took a look to the wiki and
get rid of listed deprecated boards... I thought that was an good
reason...
-- 
               Franck

^ permalink raw reply	[flat|nested] 17+ messages in thread

* [PATCH 3/3] Remove Momenco Ocelot C support
  2007-06-11 13:08 Remove obsolete board support Franck Bui-Huu
  2007-06-11 13:08 ` [PATCH 1/3] Remove MIPS ATLAS support Franck Bui-Huu
  2007-06-11 13:08 ` [PATCH 2/3] Remove MIPS SEAD support Franck Bui-Huu
@ 2007-06-11 13:08 ` Franck Bui-Huu
  2007-06-13 18:52   ` Ralf Baechle
  2007-06-11 13:30 ` Remove obsolete board support Ralf Baechle
  3 siblings, 1 reply; 17+ messages in thread
From: Franck Bui-Huu @ 2007-06-11 13:08 UTC (permalink / raw)
  To: ralf; +Cc: linux-mips

From: Franck Bui-Huu <fbuihuu@gmail.com>

Momenco Ocelot C support is deprecated and scheduled for removal
since September 2006.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
---
 arch/mips/Kconfig                           |   18 -
 arch/mips/Makefile                          |    8 -
 arch/mips/configs/ocelot_c_defconfig        |  982 ---------------------------
 arch/mips/momentum/ocelot_c/Makefile        |    8 -
 arch/mips/momentum/ocelot_c/cpci-irq.c      |  100 ---
 arch/mips/momentum/ocelot_c/dbg_io.c        |  121 ----
 arch/mips/momentum/ocelot_c/irq.c           |  107 ---
 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h |   61 --
 arch/mips/momentum/ocelot_c/platform.c      |  183 -----
 arch/mips/momentum/ocelot_c/prom.c          |  183 -----
 arch/mips/momentum/ocelot_c/reset.c         |   58 --
 arch/mips/momentum/ocelot_c/setup.c         |  362 ----------
 arch/mips/momentum/ocelot_c/uart-irq.c      |   91 ---
 arch/mips/pci/Makefile                      |    1 -
 arch/mips/pci/fixup-ocelot-c.c              |   41 --
 arch/mips/pci/pci-ocelot-c.c                |  145 ----
 include/asm-mips/bootinfo.h                 |    2 +-
 include/asm-mips/serial.h                   |   26 -
 18 files changed, 1 insertions(+), 2496 deletions(-)
 delete mode 100644 arch/mips/configs/ocelot_c_defconfig
 delete mode 100644 arch/mips/momentum/ocelot_c/Makefile
 delete mode 100644 arch/mips/momentum/ocelot_c/cpci-irq.c
 delete mode 100644 arch/mips/momentum/ocelot_c/dbg_io.c
 delete mode 100644 arch/mips/momentum/ocelot_c/irq.c
 delete mode 100644 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
 delete mode 100644 arch/mips/momentum/ocelot_c/platform.c
 delete mode 100644 arch/mips/momentum/ocelot_c/prom.c
 delete mode 100644 arch/mips/momentum/ocelot_c/reset.c
 delete mode 100644 arch/mips/momentum/ocelot_c/setup.c
 delete mode 100644 arch/mips/momentum/ocelot_c/uart-irq.c
 delete mode 100644 arch/mips/pci/fixup-ocelot-c.c
 delete mode 100644 arch/mips/pci/pci-ocelot-c.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 731b438..4ef3e39 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -245,24 +245,6 @@ config MOMENCO_OCELOT_3
 	  The Ocelot-3 is based off Discovery III System Controller and
 	  PMC-Sierra Rm79000 core.
 
-config MOMENCO_OCELOT_C
-	bool "Momentum Ocelot-C board"
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_MV64340
-	select PCI_MARVELL
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-	  Momentum Computer <http://www.momenco.com/>.
-
 config PNX8550_JBS
 	bool "Philips PNX8550 based JBS board"
 	select PNX8550
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 1f0fb74..9512184 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -328,14 +328,6 @@ cflags-$(CONFIG_MOMENCO_OCELOT)	+= -Iinclude/asm-mips/mach-ocelot
 load-$(CONFIG_MOMENCO_OCELOT)	+= 0xffffffff80100000
 
 #
-# Momentum Ocelot-C and -CS boards
-#
-# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the
-# mips_io_port_base.
-core-$(CONFIG_MOMENCO_OCELOT_C)	+= arch/mips/momentum/ocelot_c/
-load-$(CONFIG_MOMENCO_OCELOT_C)	+= 0xffffffff80100000
-
-#
 # PMC-Sierra Yosemite
 #
 core-$(CONFIG_PMC_YOSEMITE)	+= arch/mips/pmc-sierra/yosemite/
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
deleted file mode 100644
index 82ff6fc..0000000
--- a/arch/mips/configs/ocelot_c_defconfig
+++ /dev/null
@@ -1,982 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:36 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-CONFIG_MOMENCO_OCELOT_C=y
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_MV64340=y
-CONFIG_PCI_MARVELL=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-CONFIG_CPU_RM7000=y
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
-CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile
deleted file mode 100644
index d69161a..0000000
--- a/arch/mips/momentum/ocelot_c/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for Momentum Computer's Ocelot-C and -CS boards.
-#
-
-obj-y	 		+= cpci-irq.o irq.o platform.o prom.o reset.o \
-			   setup.o uart-irq.o
-
-obj-$(CONFIG_KGDB)	+= dbg_io.o
diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c
deleted file mode 100644
index 186a140..0000000
--- a/arch/mips/momentum/ocelot_c/cpci-irq.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer
- * Author: mdharm@momenco.com
- *
- * arch/mips/momentum/ocelot_c/cpci-irq.c
- *     Interrupt routines for cpci.  Interrupt numbers are assigned from
- *     CPCI_IRQ_BASE to CPCI_IRQ_BASE+8 (8 interrupt sources).
- *
- * Note that the high-level software will need to be careful about using
- * these interrupts.  If this board is asserting a cPCI interrupt, it will
- * also see the asserted interrupt.  Care must be taken to avoid an
- * interrupt flood.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <asm/io.h>
-#include "ocelot_c_fpga.h"
-
-#define CPCI_IRQ_BASE	8
-
-static inline int ls1bit8(unsigned int x)
-{
-        int b = 7, s;
-
-        s =  4; if (((unsigned char)(x <<  4)) == 0) s = 0; b -= s; x <<= s;
-        s =  2; if (((unsigned char)(x <<  2)) == 0) s = 0; b -= s; x <<= s;
-        s =  1; if (((unsigned char)(x <<  1)) == 0) s = 0; b -= s;
-
-        return b;
-}
-
-/* mask off an interrupt -- 0 is enable, 1 is disable */
-static inline void mask_cpci_irq(unsigned int irq)
-{
-	uint32_t value;
-
-	value = OCELOT_FPGA_READ(INTMASK);
-	value |= 1 << (irq - CPCI_IRQ_BASE);
-	OCELOT_FPGA_WRITE(value, INTMASK);
-
-	/* read the value back to assure that it's really been written */
-	value = OCELOT_FPGA_READ(INTMASK);
-}
-
-/* unmask an interrupt -- 0 is enable, 1 is disable */
-static inline void unmask_cpci_irq(unsigned int irq)
-{
-	uint32_t value;
-
-	value = OCELOT_FPGA_READ(INTMASK);
-	value &= ~(1 << (irq - CPCI_IRQ_BASE));
-	OCELOT_FPGA_WRITE(value, INTMASK);
-
-	/* read the value back to assure that it's really been written */
-	value = OCELOT_FPGA_READ(INTMASK);
-}
-
-/*
- * Interrupt handler for interrupts coming from the FPGA chip.
- * It could be built in ethernet ports etc...
- */
-void ll_cpci_irq(void)
-{
-	unsigned int irq_src, irq_mask;
-
-	/* read the interrupt status registers */
-	irq_src = OCELOT_FPGA_READ(INTSTAT);
-	irq_mask = OCELOT_FPGA_READ(INTMASK);
-
-	/* mask for just the interrupts we want */
-	irq_src &= ~irq_mask;
-
-	do_IRQ(ls1bit8(irq_src) + CPCI_IRQ_BASE);
-}
-
-struct irq_chip cpci_irq_type = {
-	.name = "CPCI/FPGA",
-	.ack = mask_cpci_irq,
-	.mask = mask_cpci_irq,
-	.mask_ack = mask_cpci_irq,
-	.unmask = unmask_cpci_irq,
-};
-
-void cpci_irq_init(void)
-{
-	int i;
-
-	for (i = CPCI_IRQ_BASE; i < (CPCI_IRQ_BASE + 8); i++)
-		set_irq_chip_and_handler(i, &cpci_irq_type, handle_level_irq);
-}
diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c
deleted file mode 100644
index 32d6fb4..0000000
--- a/arch/mips/momentum/ocelot_c/dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-
-#include <asm/serial.h> /* For the serial port location and base baud */
-
-/* --- CONFIG --- */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-/* --- END OF CONFIG --- */
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-
-/* [jsun] we use the second serial port for kdb */
-#define         BASE                    OCELOT_SERIAL1_BASE
-#define         MAX_BAUD                OCELOT_BASE_BAUD
-
-/* === END OF CONFIG === */
-
-#define         REG_OFFSET              4
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
-#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
-	/* disable interrupts */
-	UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-	/* set up baud rate */
-	{
-		uint32 divisor;
-
-		/* set DIAB bit */
-		UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-		/* set divisor */
-		divisor = MAX_BAUD / baud;
-		UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-		UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-		/* clear DIAB bit */
-		UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-	}
-
-	/* set data format */
-	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-uint8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_38400,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-	return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_38400,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
-	UART16550_WRITE(OFS_SEND_BUFFER, byte);
-	return 1;
-}
diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c
deleted file mode 100644
index 844d566..0000000
--- a/arch/mips/momentum/ocelot_c/irq.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <linux/mv643xx.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-extern void uart_irq_init(void);
-extern void cpci_irq_init(void);
-
-static struct irqaction cascade_fpga = {
-	no_action, IRQF_DISABLED, CPU_MASK_NONE, "cascade via FPGA", NULL, NULL
-};
-
-static struct irqaction cascade_mv64340 = {
-	no_action, IRQF_DISABLED, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL
-};
-
-extern void ll_uart_irq(void);
-extern void ll_cpci_irq(void);
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
-	if (pending & STATUSF_IP0)
-		do_IRQ(0);
-	else if (pending & STATUSF_IP1)
-		do_IRQ(1);
-	else if (pending & STATUSF_IP2)
-		do_IRQ(2);
-	else if (pending & STATUSF_IP3)
-		ll_uart_irq();
-	else if (pending & STATUSF_IP4)
-		do_IRQ(4);
-	else if (pending & STATUSF_IP5)
-		ll_cpci_irq();
-	else if (pending & STATUSF_IP6)
-		ll_mv64340_irq();
-	else if (pending & STATUSF_IP7)
-		do_IRQ(7);
-	else
-		spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
-	/*
-	 * Clear all of the interrupts while we change the able around a bit.
-	 * int-handler is not on bootstrap
-	 */
-	clear_c0_status(ST0_IM);
-
-	mips_cpu_irq_init();
-
-	/* set up the cascading interrupts */
-	setup_irq(3, &cascade_fpga);
-	setup_irq(5, &cascade_fpga);
-	setup_irq(6, &cascade_mv64340);
-
-	mv64340_irq_init(16);
-	uart_irq_init();
-	cpci_irq_init();
-}
diff --git a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
deleted file mode 100644
index f0f5581..0000000
--- a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Ocelot-C Board Register Definitions
- *
- * (C) 2002 Momentum Computer Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  Louis Hamilton, Red Hat, Inc.
- *    hamilton@redhat.com  [MIPS64 modifications]
- */
-
-#ifndef __OCELOT_C_FPGA_H__
-#define __OCELOT_C_FPGA_H__
-
-
-#ifdef CONFIG_64BIT
-#define OCELOT_C_CS0_ADDR       (0xfffffffffc000000)
-#else
-#define OCELOT_C_CS0_ADDR               (0xfc000000)
-#endif
-
-#define OCELOT_C_REG_BOARDREV		0x0
-#define OCELOT_C_REG_FPGA_REV		0x1
-#define OCELOT_C_REG_FPGA_TYPE		0x2
-#define OCELOT_C_REG_RESET_STATUS	0x3
-#define OCELOT_C_REG_BOARD_STATUS	0x4
-#define OCELOT_C_REG_CPCI_ID		0x5
-#define OCELOT_C_REG_SET		0x6
-#define OCELOT_C_REG_CLR		0x7
-#define OCELOT_C_REG_EEPROM_MODE	0x9
-#define OCELOT_C_REG_INTMASK		0xa
-#define OCELOT_C_REG_INTSTAT		0xb
-#define OCELOT_C_REG_UART_INTMASK	0xc
-#define OCELOT_C_REG_UART_INTSTAT	0xd
-#define OCELOT_C_REG_INTSET		0xe
-#define OCELOT_C_REG_INTCLR		0xf
-
-#define __FPGA_REG_TO_ADDR(reg)						\
-	((void *) OCELOT_C_CS0_ADDR + OCELOT_C_REG_##reg)
-#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
-#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
-
-#endif
diff --git a/arch/mips/momentum/ocelot_c/platform.c b/arch/mips/momentum/ocelot_c/platform.c
deleted file mode 100644
index 7780aa0..0000000
--- a/arch/mips/momentum/ocelot_c/platform.c
+++ /dev/null
@@ -1,183 +0,0 @@
-#include <linux/delay.h>
-#include <linux/if_ether.h>
-#include <linux/ioport.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-
-#include "ocelot_c_fpga.h"
-
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-
-static struct resource mv643xx_eth_shared_resources[] = {
-	[0] = {
-		.name   = "ethernet shared base",
-		.start  = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
-		.end    = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
-		                       MV643XX_ETH_SHARED_REGS_SIZE - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mv643xx_eth_shared_device = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv643xx_eth_shared_resources),
-	.resource	= mv643xx_eth_shared_resources,
-};
-
-#define MV_SRAM_BASE			0xfe000000UL
-#define MV_SRAM_SIZE			(256 * 1024)
-
-#define MV_SRAM_RXRING_SIZE		(MV_SRAM_SIZE / 4)
-#define MV_SRAM_TXRING_SIZE		(MV_SRAM_SIZE / 4)
-
-#define MV_SRAM_BASE_ETH0		MV_SRAM_BASE
-#define MV_SRAM_BASE_ETH1		(MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
-
-#define MV64x60_IRQ_ETH_0 48
-#define MV64x60_IRQ_ETH_1 49
-
-static struct resource mv64x60_eth0_resources[] = {
-	[0] = {
-		.name	= "eth0 irq",
-		.start	= MV64x60_IRQ_ETH_0,
-		.end	= MV64x60_IRQ_ETH_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth0_pd = {
-	.port_number	= 0,
-
-	.tx_sram_addr	= MV_SRAM_BASE_ETH0,
-	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
-	.tx_queue_size	= MV_SRAM_TXRING_SIZE / 16,
-
-	.rx_sram_addr	= MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
-	.rx_sram_size	= MV_SRAM_RXRING_SIZE,
-	.rx_queue_size	= MV_SRAM_RXRING_SIZE / 16,
-};
-
-static struct platform_device eth0_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth0_resources),
-	.resource	= mv64x60_eth0_resources,
-	.dev = {
-		.platform_data = &eth0_pd,
-	},
-};
-
-static struct resource mv64x60_eth1_resources[] = {
-	[0] = {
-		.name	= "eth1 irq",
-		.start	= MV64x60_IRQ_ETH_1,
-		.end	= MV64x60_IRQ_ETH_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
-	.port_number	= 1,
-
-	.tx_sram_addr	= MV_SRAM_BASE_ETH1,
-	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
-	.tx_queue_size	= MV_SRAM_TXRING_SIZE / 16,
-
-	.rx_sram_addr	= MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
-	.rx_sram_size	= MV_SRAM_RXRING_SIZE,
-	.rx_queue_size	= MV_SRAM_RXRING_SIZE / 16,
-};
-
-static struct platform_device eth1_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth1_resources),
-	.resource	= mv64x60_eth1_resources,
-	.dev = {
-		.platform_data = &eth1_pd,
-	},
-};
-
-static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
-	&mv643xx_eth_shared_device,
-	&eth0_device,
-	&eth1_device,
-	/* The third port is not wired up on the Ocelot C */
-};
-
-static u8 __init exchange_bit(u8 val, u8 cs)
-{
-	/* place the data */
-	OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
-	udelay(1);
-
-	/* turn the clock on */
-	OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
-	udelay(1);
-
-	/* turn the clock off and read-strobe */
-	OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
-	/* return the data */
-	return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
-}
-
-static void __init get_mac(char dest[6])
-{
-	u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-	int i,j;
-
-	for (i = 0; i < 12; i++)
-		exchange_bit(read_opcode[i], 1);
-
-	for (j = 0; j < 6; j++) {
-		dest[j] = 0;
-		for (i = 0; i < 8; i++) {
-			dest[j] <<= 1;
-			dest[j] |= exchange_bit(0, 1);
-		}
-	}
-
-	/* turn off CS */
-	exchange_bit(0,0);
-}
-
-/*
- * Copy and increment ethernet MAC address by a small value.
- *
- * This is useful for systems where the only one MAC address is stored in
- * non-volatile memory for multiple ports.
- */
-static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
-	unsigned int add)
-{
-	int i;
-
-	BUG_ON(add >= 256);
-
-	for (i = ETH_ALEN; i >= 0; i--) {
-		dst[i] = src[i] + add;
-		add = dst[i] < src[i];		/* compute carry */
-	}
-
-	WARN_ON(add);
-}
-
-static int __init mv643xx_eth_add_pds(void)
-{
-	unsigned char mac[ETH_ALEN];
-	int ret;
-
-	get_mac(mac);
-	eth_mac_add(eth0_pd.mac_addr, mac, 0);
-	eth_mac_add(eth1_pd.mac_addr, mac, 1);
-	ret = platform_add_devices(mv643xx_eth_pd_devs,
-			ARRAY_SIZE(mv643xx_eth_pd_devs));
-
-	return ret;
-}
-
-device_initcall(mv643xx_eth_add_pds);
-
-#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c
deleted file mode 100644
index b689cee..0000000
--- a/arch/mips/momentum/ocelot_c/prom.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- *   hamilton@redhat.com  [MIPS64 modifications]
- *
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/mv643xx.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/pmon.h>
-
-#include "ocelot_c_fpga.h"
-
-struct callvectors* debug_vectors;
-
-extern unsigned long marvell_base;
-extern unsigned int cpu_clock;
-
-const char *get_system_type(void)
-{
-#ifdef CONFIG_CPU_SR71000
-	return "Momentum Ocelot-CS";
-#else
-	return "Momentum Ocelot-C";
-#endif
-}
-
-#ifdef CONFIG_64BIT
-
-unsigned long signext(unsigned long addr)
-{
-  addr &= 0xffffffff;
-  return (unsigned long)((int)addr);
-}
-
-void *get_arg(unsigned long args, int arc)
-{
-  unsigned long ul;
-  unsigned char *puc, uc;
-
-  args += (arc * 4);
-  ul = (unsigned long)signext(args);
-  puc = (unsigned char *)ul;
-  if (puc == 0)
-    return (void *)0;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-  uc = *puc++;
-  ul = (unsigned long)uc;
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 8);
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 16);
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 24);
-#else  /* CONFIG_CPU_LITTLE_ENDIAN */
-  uc = *puc++;
-  ul = ((unsigned long)uc) << 24;
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 16);
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 8);
-  uc = *puc++;
-  ul |= ((unsigned long)uc);
-#endif  /* CONFIG_CPU_LITTLE_ENDIAN */
-  ul = signext(ul);
-  return (void *)ul;
-}
-
-char *arg64(unsigned long addrin, int arg_index)
-{
-  unsigned long args;
-  char *p;
-  args = signext(addrin);
-  p = (char *)get_arg(args, arg_index);
-  return p;
-}
-#endif  /* CONFIG_64BIT */
-
-
-void __init prom_init(void)
-{
-	int argc = fw_arg0;
-	char **arg = (char **) fw_arg1;
-	char **env = (char **) fw_arg2;
-	struct callvectors *cv = (struct callvectors *) fw_arg3;
-	int i;
-
-#ifdef CONFIG_64BIT
-	char *ptr;
-
-	printk("prom_init - MIPS64\n");
-	/* save the PROM vectors for debugging use */
-	debug_vectors = (struct callvectors *)signext((unsigned long)cv);
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-
-	for (i = 1; i < argc; i++) {
-		ptr = (char *)arg64((unsigned long)arg, i);
-		if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
-		    sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, ptr);
-		strcat(arcs_cmdline, " ");
-	}
-	i = 0;
-	while (1) {
-		ptr = (char *)arg64((unsigned long)env, i);
-		if (! ptr)
-			break;
-
-		if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
-			marvell_base = simple_strtol(ptr + strlen("gtbase="),
-							NULL, 16);
-
-			if ((marvell_base & 0xffffffff00000000) == 0)
-				marvell_base |= 0xffffffff00000000;
-
-			printk("marvell_base set to 0x%016lx\n", marvell_base);
-		}
-		if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
-			cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
-							NULL, 10);
-			printk("cpu_clock set to %d\n", cpu_clock);
-		}
-		i++;
-	}
-	printk("arcs_cmdline: %s\n", arcs_cmdline);
-
-#else   /* CONFIG_64BIT */
-	/* save the PROM vectors for debugging use */
-	debug_vectors = cv;
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, arg[i]);
-		strcat(arcs_cmdline, " ");
-	}
-
-	while (*env) {
-		if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
-			marvell_base = simple_strtol(*env + strlen("gtbase="),
-							NULL, 16);
-		}
-		if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
-			cpu_clock = simple_strtol(*env + strlen("cpuclock="),
-							NULL, 10);
-		}
-		env++;
-	}
-#endif /* CONFIG_64BIT */
-
-	mips_machgroup = MACH_GROUP_MOMENCO;
-	mips_machtype = MACH_MOMENCO_OCELOT_C;
-
-#ifndef CONFIG_64BIT
-	debug_vectors->printf("Booting Linux kernel...\n");
-#endif
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/momentum/ocelot_c/reset.c b/arch/mips/momentum/ocelot_c/reset.c
deleted file mode 100644
index 3fdcb64..0000000
--- a/arch/mips/momentum/ocelot_c/reset.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 2001 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- * hamilton@redhat.com  [MIPS64 modifications]
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <linux/delay.h>
-
-void momenco_ocelot_restart(char *command)
-{
-	/* base address of timekeeper portion of part */
-	void *nvram = (void *)
-#ifdef CONFIG_64BIT
-		0xfffffffffc807000;
-#else
-		0xfc807000;
-#endif
-
-	/* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
-	writeb(0x84, nvram + 0xff7);
-
-	/* wait for the watchdog to go off */
-	mdelay(100+(1000/16));
-
-	/* if the watchdog fails for some reason, let people know */
-	printk(KERN_NOTICE "Watchdog reset failed\n");
-}
-
-void momenco_ocelot_halt(void)
-{
-	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-	while (1)
-		__asm__(".set\tmips3\n\t"
-	                "wait\n\t"
-			".set\tmips0");
-}
-
-void momenco_ocelot_power_off(void)
-{
-	momenco_ocelot_halt();
-}
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
deleted file mode 100644
index 0b6b233..0000000
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Momentum Computer Ocelot-C and -CS board dependent boot routines
- *
- * Copyright (C) 1996, 1997, 2001  Ralf Baechle
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2001 Red Hat, Inc.
- * Copyright (C) 2002 Momentum Computer
- *
- * Author: Matthew Dharm, Momentum Computer
- *   mdharm@momenco.com
- *
- * Louis Hamilton, Red Hat, Inc.
- *   hamilton@redhat.com  [MIPS64 modifications]
- *
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/bcd.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/timex.h>
-#include <linux/vmalloc.h>
-#include <linux/mv643xx.h>
-
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/marvell.h>
-#include <linux/bootmem.h>
-#include <linux/blkdev.h>
-#include "ocelot_c_fpga.h"
-
-unsigned long marvell_base;
-unsigned int cpu_clock;
-
-/* These functions are used for rebooting or halting the machine*/
-extern void momenco_ocelot_restart(char *command);
-extern void momenco_ocelot_halt(void);
-extern void momenco_ocelot_power_off(void);
-
-void momenco_time_init(void);
-
-static char reset_reason;
-
-void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long entryhi, unsigned long pagemask);
-
-static unsigned long ENTRYLO(unsigned long paddr)
-{
-	return ((paddr & PAGE_MASK) |
-	       (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
-		_CACHE_UNCACHED)) >> 6;
-}
-
-/* setup code for a handoff from a version 2 PMON 2000 PROM */
-void PMON_v2_setup(void)
-{
-	/* Some wired TLB entries for the MV64340 and perhiperals. The
-	   MV64340 is going to be hit on every IRQ anyway - there's
-	   absolutely no point in letting it be a random TLB entry, as
-	   it'll just cause needless churning of the TLB. And we use
-	   the other half for the serial port, which is just a PITA
-	   otherwise :)
-
-		Device			Physical	Virtual
-		MV64340 Internal Regs	0xf4000000	0xf4000000
-		Ocelot-C[S] PLD (CS0)	0xfc000000	0xfc000000
-		NVRAM (CS1)		0xfc800000	0xfc800000
-		UARTs (CS2)		0xfd000000	0xfd000000
-		Internal SRAM		0xfe000000	0xfe000000
-		M-Systems DOC (CS3)	0xff000000	0xff000000
-	*/
-  printk("PMON_v2_setup\n");
-
-#ifdef CONFIG_64BIT
-	/* marvell and extra space */
-	add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xfffffffff4000000, PM_64K);
-	/* fpga, rtc, and uart */
-	add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfffffffffc000000, PM_16M);
-	/* m-sys and internal SRAM */
-	add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M);
-
-	marvell_base = 0xfffffffff4000000;
-#else
-	/* marvell and extra space */
-	add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K);
-	/* fpga, rtc, and uart */
-	add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfc000000, PM_16M);
-	/* m-sys and internal SRAM */
-	add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M);
-
-	marvell_base = 0xf4000000;
-#endif
-}
-
-unsigned long m48t37y_get_time(void)
-{
-#ifdef CONFIG_64BIT
-	unsigned char *rtc_base = (unsigned char*)0xfffffffffc800000;
-#else
-	unsigned char* rtc_base = (unsigned char*)0xfc800000;
-#endif
-	unsigned int year, month, day, hour, min, sec;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	/* stop the update */
-	rtc_base[0x7ff8] = 0x40;
-
-	year = BCD2BIN(rtc_base[0x7fff]);
-	year += BCD2BIN(rtc_base[0x7ff1]) * 100;
-
-	month = BCD2BIN(rtc_base[0x7ffe]);
-
-	day = BCD2BIN(rtc_base[0x7ffd]);
-
-	hour = BCD2BIN(rtc_base[0x7ffb]);
-	min = BCD2BIN(rtc_base[0x7ffa]);
-	sec = BCD2BIN(rtc_base[0x7ff9]);
-
-	/* start the update */
-	rtc_base[0x7ff8] = 0x00;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return mktime(year, month, day, hour, min, sec);
-}
-
-int m48t37y_set_time(unsigned long sec)
-{
-#ifdef CONFIG_64BIT
-	unsigned char* rtc_base = (unsigned char*)0xfffffffffc800000;
-#else
-	unsigned char* rtc_base = (unsigned char*)0xfc800000;
-#endif
-	struct rtc_time tm;
-	unsigned long flags;
-
-	/* convert to a more useful format -- note months count from 0 */
-	to_tm(sec, &tm);
-	tm.tm_mon += 1;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	/* enable writing */
-	rtc_base[0x7ff8] = 0x80;
-
-	/* year */
-	rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100);
-	rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100);
-
-	/* month */
-	rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon);
-
-	/* day */
-	rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday);
-
-	/* hour/min/sec */
-	rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour);
-	rtc_base[0x7ffa] = BIN2BCD(tm.tm_min);
-	rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
-
-	/* day of week -- not really used, but let's keep it up-to-date */
-	rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
-
-	/* disable writing */
-	rtc_base[0x7ff8] = 0x00;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	setup_irq(7, irq);
-}
-
-void momenco_time_init(void)
-{
-#ifdef CONFIG_CPU_SR71000
-	mips_hpt_frequency = cpu_clock;
-#elif defined(CONFIG_CPU_RM7000)
-	mips_hpt_frequency = cpu_clock / 2;
-#else
-#error Unknown CPU for this board
-#endif
-	printk("momenco_time_init cpu_clock=%d\n", cpu_clock);
-
-	rtc_mips_get_time = m48t37y_get_time;
-	rtc_mips_set_time = m48t37y_set_time;
-}
-
-void __init plat_mem_setup(void)
-{
-	unsigned int tmpword;
-
-	board_time_init = momenco_time_init;
-
-	_machine_restart = momenco_ocelot_restart;
-	_machine_halt = momenco_ocelot_halt;
-	pm_power_off = momenco_ocelot_power_off;
-
-	/*
-	 * initrd_start = (unsigned long)ocelot_initrd_start;
-	 * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
-	 * initrd_below_start_ok = 1;
-	 */
-
-	/* do handoff reconfiguration */
-	PMON_v2_setup();
-
-	/* shut down ethernet ports, just to be sure our memory doesn't get
-	 * corrupted by random ethernet traffic.
-	 */
-	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
-	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
-	do {}
-	  while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
-	do {}
-	  while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
-	do {}
-	  while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
-	do {}
-	  while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
-	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
-	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
-	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
-	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
-
-	/* Turn off the Bit-Error LED */
-	OCELOT_FPGA_WRITE(0x80, CLR);
-
-	tmpword = OCELOT_FPGA_READ(BOARDREV);
-#ifdef CONFIG_CPU_SR71000
-	if (tmpword < 26)
-		printk("Momenco Ocelot-CS: Board Assembly Rev. %c\n",
-			'A'+tmpword);
-	else
-		printk("Momenco Ocelot-CS: Board Assembly Revision #0x%x\n",
-			tmpword);
-#else
-	if (tmpword < 26)
-		printk("Momenco Ocelot-C: Board Assembly Rev. %c\n",
-			'A'+tmpword);
-	else
-		printk("Momenco Ocelot-C: Board Assembly Revision #0x%x\n",
-			tmpword);
-#endif
-
-	tmpword = OCELOT_FPGA_READ(FPGA_REV);
-	printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
-	tmpword = OCELOT_FPGA_READ(RESET_STATUS);
-	printk("Reset reason: 0x%x\n", tmpword);
-	switch (tmpword) {
-		case 0x1:
-			printk("  - Power-up reset\n");
-			break;
-		case 0x2:
-			printk("  - Push-button reset\n");
-			break;
-		case 0x4:
-			printk("  - cPCI bus reset\n");
-			break;
-		case 0x8:
-			printk("  - Watchdog reset\n");
-			break;
-		case 0x10:
-			printk("  - Software reset\n");
-			break;
-		default:
-			printk("  - Unknown reset cause\n");
-	}
-	reset_reason = tmpword;
-	OCELOT_FPGA_WRITE(0xff, RESET_STATUS);
-
-	tmpword = OCELOT_FPGA_READ(CPCI_ID);
-	printk("cPCI ID register: 0x%02x\n", tmpword);
-	printk("  - Slot number: %d\n", tmpword & 0x1f);
-	printk("  - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no");
-	printk("  - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no");
-
-	tmpword = OCELOT_FPGA_READ(BOARD_STATUS);
-	printk("Board Status register: 0x%02x\n", tmpword);
-	printk("  - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
-	printk("  - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
-	printk("  - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
-	printk("  - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
-
-	switch(tmpword &3) {
-	case 3:
-		/* 512MiB */
-		add_memory_region(0x0, 0x200<<20, BOOT_MEM_RAM);
-		break;
-	case 2:
-		/* 256MiB */
-		add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM);
-		break;
-	case 1:
-		/* 128MiB */
-		add_memory_region(0x0,  0x80<<20, BOOT_MEM_RAM);
-		break;
-	case 0:
-		/* 1GiB -- needs CONFIG_HIGHMEM */
-		add_memory_region(0x0, 0x400<<20, BOOT_MEM_RAM);
-		break;
-	}
-}
-
-/*
- * This needs to be one of the first initcalls, because no I/O port access
- * can work before this
- */
-static int io_base_ioremap(void)
-{
-	void __iomem * io_remap_range = ioremap(0xc0000000UL, 0x10000);
-
-	if (!io_remap_range)
-		panic("Could not ioremap I/O port range");
-
-	set_io_port_base((unsigned long) io_remap_range);
-
-	return 0;
-}
-
-module_init(io_base_ioremap);
diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c
deleted file mode 100644
index de1a31e..0000000
--- a/arch/mips/momentum/ocelot_c/uart-irq.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer
- * Author: mdharm@momenco.com
- *
- * arch/mips/momentum/ocelot_c/uart-irq.c
- *     Interrupt routines for UARTs.  Interrupt numbers are assigned from
- *     80 to 81 (2 interrupt sources).
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include "ocelot_c_fpga.h"
-
-static inline int ls1bit8(unsigned int x)
-{
-        int b = 7, s;
-
-        s =  4; if (((unsigned char)(x << 4)) == 0) s = 0; b -= s; x <<= s;
-        s =  2; if (((unsigned char)(x << 2)) == 0) s = 0; b -= s; x <<= s;
-        s =  1; if (((unsigned char)(x << 1)) == 0) s = 0; b -= s;
-
-        return b;
-}
-
-/* mask off an interrupt -- 0 is enable, 1 is disable */
-static inline void mask_uart_irq(unsigned int irq)
-{
-	uint8_t value;
-
-	value = OCELOT_FPGA_READ(UART_INTMASK);
-	value |= 1 << (irq - 74);
-	OCELOT_FPGA_WRITE(value, UART_INTMASK);
-
-	/* read the value back to assure that it's really been written */
-	value = OCELOT_FPGA_READ(UART_INTMASK);
-}
-
-/* unmask an interrupt -- 0 is enable, 1 is disable */
-static inline void unmask_uart_irq(unsigned int irq)
-{
-	uint8_t value;
-
-	value = OCELOT_FPGA_READ(UART_INTMASK);
-	value &= ~(1 << (irq - 74));
-	OCELOT_FPGA_WRITE(value, UART_INTMASK);
-
-	/* read the value back to assure that it's really been written */
-	value = OCELOT_FPGA_READ(UART_INTMASK);
-}
-
-/*
- * Interrupt handler for interrupts coming from the FPGA chip.
- */
-void ll_uart_irq(void)
-{
-	unsigned int irq_src, irq_mask;
-
-	/* read the interrupt status registers */
-	irq_src = OCELOT_FPGA_READ(UART_INTSTAT);
-	irq_mask = OCELOT_FPGA_READ(UART_INTMASK);
-
-	/* mask for just the interrupts we want */
-	irq_src &= ~irq_mask;
-
-	do_IRQ(ls1bit8(irq_src) + 74);
-}
-
-struct irq_chip uart_irq_type = {
-	.name = "UART/FPGA",
-	.ack = mask_uart_irq,
-	.mask = mask_uart_irq,
-	.mask_ack = mask_uart_irq,
-	.unmask = unmask_uart_irq,
-};
-
-void uart_irq_init(void)
-{
-	set_irq_chip_and_handler(80, &uart_irq_type, handle_level_irq);
-	set_irq_chip_and_handler(81, &uart_irq_type, handle_level_irq);
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index ddb964e..18b7a9c 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -31,7 +31,6 @@ obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_MOMENCO_OCELOT)	+= fixup-ocelot.o pci-ocelot.o
 obj-$(CONFIG_MOMENCO_OCELOT_3)	+= fixup-ocelot3.o
-obj-$(CONFIG_MOMENCO_OCELOT_C)	+= fixup-ocelot-c.o pci-ocelot-c.o
 obj-$(CONFIG_PMC_YOSEMITE)	+= fixup-yosemite.o ops-titan.o ops-titan-ht.o \
 				   pci-yosemite.o
 obj-$(CONFIG_SGI_IP27)		+= ops-bridge.o pci-ip27.o
diff --git a/arch/mips/pci/fixup-ocelot-c.c b/arch/mips/pci/fixup-ocelot-c.c
deleted file mode 100644
index d454948..0000000
--- a/arch/mips/pci/fixup-ocelot-c.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Based on work for the Linux port to the Ocelot board, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/momentum/ocelot_g/pci.c
- *     Board-specific PCI routines for mv64340 controller.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int bus = dev->bus->number;
-
-	if (bus == 0 && slot == 1)
-		return 2;       /* PCI-X A */
-	if (bus == 1 && slot == 1)
-		return 12;      /* PCI-X B */
-	if (bus == 1 && slot == 2)
-		return 4;       /* PCI B */
-
-return 0;
-	panic("Whooops in pcibios_map_irq");
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/pci-ocelot-c.c b/arch/mips/pci/pci-ocelot-c.c
deleted file mode 100644
index 027759f..0000000
--- a/arch/mips/pci/pci-ocelot-c.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 06 by Ralf Baechle (ralf@linux-mips.org)
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/mv643xx.h>
-
-#include <linux/init.h>
-
-#include <asm/marvell.h>
-
-/*
- * We assume the address ranges have already been setup appropriately by
- * the firmware.  PMON in case of the Ocelot C does that.
- */
-static struct resource mv_pci_io_mem0_resource = {
-	.name	= "MV64340 PCI0 IO MEM",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource mv_pci_mem0_resource = {
-	.name	= "MV64340 PCI0 MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-static struct mv_pci_controller mv_bus0_controller = {
-	.pcic = {
-		.pci_ops	= &mv_pci_ops,
-		.mem_resource	= &mv_pci_mem0_resource,
-		.io_resource	= &mv_pci_io_mem0_resource,
-	},
-	.config_addr	= MV64340_PCI_0_CONFIG_ADDR,
-	.config_vreg	= MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
-};
-
-static uint32_t mv_io_base, mv_io_size;
-
-static void mv64340_pci0_init(void)
-{
-	uint32_t mem0_base, mem0_size;
-	uint32_t io_base, io_size;
-
-	io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16;
-	io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16;
-	mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
-	mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
-
-	mv_pci_io_mem0_resource.start		= 0;
-	mv_pci_io_mem0_resource.end		= io_size - 1;
-	mv_pci_mem0_resource.start		= mem0_base;
-	mv_pci_mem0_resource.end		= mem0_base + mem0_size - 1;
-	mv_bus0_controller.pcic.mem_offset	= mem0_base;
-	mv_bus0_controller.pcic.io_offset	= 0;
-
-	ioport_resource.end		= io_size - 1;
-
-	register_pci_controller(&mv_bus0_controller.pcic);
-
-	mv_io_base = io_base;
-	mv_io_size = io_size;
-}
-
-static struct resource mv_pci_io_mem1_resource = {
-	.name	= "MV64340 PCI1 IO MEM",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource mv_pci_mem1_resource = {
-	.name	= "MV64340 PCI1 MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-static struct mv_pci_controller mv_bus1_controller = {
-	.pcic = {
-		.pci_ops	= &mv_pci_ops,
-		.mem_resource	= &mv_pci_mem1_resource,
-		.io_resource	= &mv_pci_io_mem1_resource,
-	},
-	.config_addr	= MV64340_PCI_1_CONFIG_ADDR,
-	.config_vreg	= MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
-};
-
-static __init void mv64340_pci1_init(void)
-{
-	uint32_t mem0_base, mem0_size;
-	uint32_t io_base, io_size;
-
-	io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16;
-	io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16;
-	mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16;
-	mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16;
-
-	/*
-	 * Here we assume the I/O window of second bus to be contiguous with
-	 * the first.  A gap is no problem but would waste address space for
-	 * remapping the port space.
-	 */
-	mv_pci_io_mem1_resource.start		= mv_io_size;
-	mv_pci_io_mem1_resource.end		= mv_io_size + io_size - 1;
-	mv_pci_mem1_resource.start		= mem0_base;
-	mv_pci_mem1_resource.end		= mem0_base + mem0_size - 1;
-	mv_bus1_controller.pcic.mem_offset	= mem0_base;
-	mv_bus1_controller.pcic.io_offset	= 0;
-
-	ioport_resource.end		= io_base + io_size -mv_io_base - 1;
-
-	register_pci_controller(&mv_bus1_controller.pcic);
-
-	mv_io_size = io_base + io_size - mv_io_base;
-}
-
-static __init int __init ocelot_c_pci_init(void)
-{
-	unsigned long io_v_base;
-	uint32_t enable;
-
-	enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
-
-	/*
-	 * We require at least one enabled I/O or PCI memory window or we
-	 * will ignore this PCI bus.  We ignore PCI windows 1, 2 and 3.
-	 */
-	if (enable & (0x01 <<  9) || enable & (0x01 << 10))
-		mv64340_pci0_init();
-
-	if (enable & (0x01 << 14) || enable & (0x01 << 15))
-		mv64340_pci1_init();
-
-	if (mv_io_size) {
-		io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size);
-		if (!io_v_base)
-			panic("Could not ioremap I/O port range");
-
-		set_io_port_base(io_v_base);
-	}
-
-	return 0;
-}
-
-arch_initcall(ocelot_c_pci_init);
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index b0c3297..3a09af0 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -120,7 +120,7 @@
 #define MACH_GROUP_MOMENCO	12	/* Momentum Boards		*/
 #define  MACH_MOMENCO_OCELOT	0
 #define  MACH_MOMENCO_OCELOT_G	1	/* no more supported (may 2007) */
-#define  MACH_MOMENCO_OCELOT_C	2
+#define  MACH_MOMENCO_OCELOT_C	2	/* no more supported (jun 2007) */
 #define  MACH_MOMENCO_JAGUAR_ATX 3	/* no more supported (may 2007) */
 #define  MACH_MOMENCO_OCELOT_3	4
 
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index ce51213..007162a 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -115,31 +115,6 @@
 #define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
 #endif
 
-#ifdef CONFIG_MOMENCO_OCELOT_C
-/* Ordinary NS16552 duart with a 20MHz crystal.  */
-#define OCELOT_C_BASE_BAUD ( 20000000 / 16 )
-
-#define OCELOT_C_SERIAL1_IRQ	80
-#define OCELOT_C_SERIAL1_BASE	0xfd000020
-
-#define OCELOT_C_SERIAL2_IRQ	81
-#define OCELOT_C_SERIAL2_BASE	0xfd000000
-
-#define _OCELOT_C_SERIAL_INIT(int, base)				\
-	{ .baud_base		= OCELOT_C_BASE_BAUD,			\
-	  .irq			= (int),				\
-	  .flags		= STD_COM_FLAGS,			\
-	  .iomem_base		= (u8 *) base,				\
-	  .iomem_reg_shift	= 2,					\
-	  .io_type		= SERIAL_IO_MEM				\
-	 }
-#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS				\
-	_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \
-	_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE)
-#else
-#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS
-#endif
-
 #ifdef CONFIG_DDB5477
 #include <asm/ddb5xxx/ddb5477.h>
 #define DDB5477_SERIAL_PORT_DEFNS                                       \
@@ -170,7 +145,6 @@
 	IP32_SERIAL_PORT_DEFNS                          \
 	JAZZ_SERIAL_PORT_DEFNS				\
 	STD_SERIAL_PORT_DEFNS				\
-	MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS		\
 	MOMENCO_OCELOT_SERIAL_PORT_DEFNS		\
 	MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
 
-- 
1.5.2.1

^ permalink raw reply related	[flat|nested] 17+ messages in thread

* Re: [PATCH 3/3] Remove Momenco Ocelot C support
  2007-06-11 13:08 ` [PATCH 3/3] Remove Momenco Ocelot C support Franck Bui-Huu
@ 2007-06-13 18:52   ` Ralf Baechle
  2007-06-14  7:11     ` Yoichi Yuasa
  0 siblings, 1 reply; 17+ messages in thread
From: Ralf Baechle @ 2007-06-13 18:52 UTC (permalink / raw)
  To: Franck Bui-Huu; +Cc: linux-mips

On Mon, Jun 11, 2007 at 03:08:55PM +0200, Franck Bui-Huu wrote:

> Momenco Ocelot C support is deprecated and scheduled for removal
> since September 2006.

And totally untested since ages.  2.6.22 will be its last summer ;-)

Patch queued up to 2.6.23, actually already a few days ago.

Thanks,

  Ralf

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 3/3] Remove Momenco Ocelot C support
  2007-06-13 18:52   ` Ralf Baechle
@ 2007-06-14  7:11     ` Yoichi Yuasa
  2007-06-14  7:36       ` Franck Bui-Huu
  0 siblings, 1 reply; 17+ messages in thread
From: Yoichi Yuasa @ 2007-06-14  7:11 UTC (permalink / raw)
  To: Ralf Baechle; +Cc: yoichi_yuasa, vagabon.xyz, linux-mips

On Wed, 13 Jun 2007 19:52:32 +0100
Ralf Baechle <ralf@linux-mips.org> wrote:

> On Mon, Jun 11, 2007 at 03:08:55PM +0200, Franck Bui-Huu wrote:
> 
> > Momenco Ocelot C support is deprecated and scheduled for removal
> > since September 2006.
> 
> And totally untested since ages.  2.6.22 will be its last summer ;-)
> 
> Patch queued up to 2.6.23, actually already a few days ago.

Please queue this patch too.

Yoichi

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>

---

Already dropped Momenco Ocelot C/G boards support.
also remove their MTD support.

diff -pruN -X mips/Documentation/dontdiff mips-orig/drivers/mtd/devices/docprobe.c mips/drivers/mtd/devices/docprobe.c
--- mips-orig/drivers/mtd/devices/docprobe.c	2007-06-14 13:22:04.698797000 +0900
+++ mips/drivers/mtd/devices/docprobe.c	2007-06-14 13:19:38.473658500 +0900
@@ -84,8 +84,6 @@ static unsigned long __initdata doc_loca
 #elif defined(CONFIG_MOMENCO_OCELOT)
 	0x2f000000,
 	0xff000000,
-#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
-	0xff000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
diff -pruN -X mips/Documentation/dontdiff mips-orig/drivers/mtd/nand/diskonchip.c mips/drivers/mtd/nand/diskonchip.c
--- mips-orig/drivers/mtd/nand/diskonchip.c	2007-06-14 13:22:05.482846000 +0900
+++ mips/drivers/mtd/nand/diskonchip.c	2007-06-14 13:19:12.008004500 +0900
@@ -59,8 +59,6 @@ static unsigned long __initdata doc_loca
 #elif defined(CONFIG_MOMENCO_OCELOT)
 	0x2f000000,
 	0xff000000,
-#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
-	0xff000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 3/3] Remove Momenco Ocelot C support
  2007-06-14  7:11     ` Yoichi Yuasa
@ 2007-06-14  7:36       ` Franck Bui-Huu
  0 siblings, 0 replies; 17+ messages in thread
From: Franck Bui-Huu @ 2007-06-14  7:36 UTC (permalink / raw)
  To: Yoichi Yuasa; +Cc: Ralf Baechle, linux-mips

Hi Yoichi,

On 6/14/07, Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> wrote:
> On Wed, 13 Jun 2007 19:52:32 +0100
> Ralf Baechle <ralf@linux-mips.org> wrote:
>
> > On Mon, Jun 11, 2007 at 03:08:55PM +0200, Franck Bui-Huu wrote:
> >
> > > Momenco Ocelot C support is deprecated and scheduled for removal
> > > since September 2006.
> >
> > And totally untested since ages.  2.6.22 will be its last summer ;-)
> >
> > Patch queued up to 2.6.23, actually already a few days ago.
>
> Please queue this patch too.
>

Good catch !

Thanks
-- 
               Franck

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: Remove obsolete board support
  2007-06-11 13:08 Remove obsolete board support Franck Bui-Huu
                   ` (2 preceding siblings ...)
  2007-06-11 13:08 ` [PATCH 3/3] Remove Momenco Ocelot C support Franck Bui-Huu
@ 2007-06-11 13:30 ` Ralf Baechle
  2007-06-11 14:14   ` Franck Bui-Huu
  3 siblings, 1 reply; 17+ messages in thread
From: Ralf Baechle @ 2007-06-11 13:30 UTC (permalink / raw)
  To: Franck Bui-Huu; +Cc: linux-mips

On Mon, Jun 11, 2007 at 03:08:52PM +0200, Franck Bui-Huu wrote:

> This patchset finishes to remove deprecated board support.

I de-deprecated the files but only in feature-removal-schedule.txt not
the wiki ...

  Ralf

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: Remove obsolete board support
  2007-06-11 13:30 ` Remove obsolete board support Ralf Baechle
@ 2007-06-11 14:14   ` Franck Bui-Huu
  0 siblings, 0 replies; 17+ messages in thread
From: Franck Bui-Huu @ 2007-06-11 14:14 UTC (permalink / raw)
  To: Ralf Baechle; +Cc: linux-mips

On 6/11/07, Ralf Baechle <ralf@linux-mips.org> wrote:
> On Mon, Jun 11, 2007 at 03:08:52PM +0200, Franck Bui-Huu wrote:
>
> > This patchset finishes to remove deprecated board support.
>
> I de-deprecated the files but only in feature-removal-schedule.txt not
> the wiki ...
>

OK then this patchset is deprecated...
-- 
               Franck

^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2007-06-14  7:37 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-11 13:08 Remove obsolete board support Franck Bui-Huu
2007-06-11 13:08 ` [PATCH 1/3] Remove MIPS ATLAS support Franck Bui-Huu
2007-06-11 13:28   ` Maciej W. Rozycki
2007-06-11 13:08 ` [PATCH 2/3] Remove MIPS SEAD support Franck Bui-Huu
2007-06-11 13:27   ` Maciej W. Rozycki
2007-06-11 13:31     ` Kevin D. Kissell
2007-06-11 13:31       ` Kevin D. Kissell
2007-06-11 13:35       ` Maciej W. Rozycki
2007-06-11 13:35       ` Ralf Baechle
2007-06-11 13:53     ` Ralf Baechle
2007-06-11 14:12     ` Franck Bui-Huu
2007-06-11 13:08 ` [PATCH 3/3] Remove Momenco Ocelot C support Franck Bui-Huu
2007-06-13 18:52   ` Ralf Baechle
2007-06-14  7:11     ` Yoichi Yuasa
2007-06-14  7:36       ` Franck Bui-Huu
2007-06-11 13:30 ` Remove obsolete board support Ralf Baechle
2007-06-11 14:14   ` Franck Bui-Huu

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.