From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 05/12] sky2: receive fill
Date: Mon, 09 Jul 2007 15:33:37 -0700 [thread overview]
Message-ID: <20070709223453.290284388@linux-foundation.org> (raw)
In-Reply-To: 20070709223332.966231494@linux-foundation.org
[-- Attachment #1: sky2-rx-update.patch --]
[-- Type: text/plain, Size: 3024 bytes --]
Simplify receive buffer refill logic. Rather than trying to update
incrementally; do receive ring refill at end of receive processing.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
--- a/drivers/net/sky2.c 2007-07-09 15:30:10.000000000 -0700
+++ b/drivers/net/sky2.c 2007-07-09 15:30:10.000000000 -0700
@@ -65,7 +65,6 @@
#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
#define RX_DEF_PENDING RX_MAX_PENDING
#define RX_SKB_ALIGN 8
-#define RX_BUF_WRITE 16
#define TX_RING_SIZE 512
#define TX_DEF_PENDING (TX_RING_SIZE - 1)
@@ -1138,6 +1137,11 @@ nomem:
return NULL;
}
+static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
+{
+ sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
+}
+
/*
* Allocate and setup receiver buffer pool.
* Normal case this ends up creating one list element for skb
@@ -1229,7 +1233,7 @@ static int sky2_rx_start(struct sky2_por
}
/* Tell chip about available buffers */
- sky2_put_idx(hw, rxq, sky2->rx_put);
+ sky2_rx_update(sky2, rxq);
return 0;
nomem:
sky2_rx_clean(sky2);
@@ -2147,14 +2151,14 @@ static inline void sky2_tx_done(struct n
/* Process status response ring */
static int sky2_status_intr(struct sky2_hw *hw, int to_do)
{
- struct sky2_port *sky2;
int work_done = 0;
- unsigned buf_write[2] = { 0, 0 };
+ unsigned rx[2] = { 0, 0 };
u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
rmb();
while (hw->st_idx != hwidx) {
+ struct sky2_port *sky2;
struct sky2_status_le *le = hw->st_le + hw->st_idx;
unsigned port = le->css & CSS_LINK_BIT;
struct net_device *dev;
@@ -2171,10 +2175,11 @@ static int sky2_status_intr(struct sky2_
switch (le->opcode & ~HW_OWNER) {
case OP_RXSTAT:
+ ++rx[port];
skb = sky2_receive(dev, length, status);
if (unlikely(!skb)) {
sky2->net_stats.rx_dropped++;
- goto force_update;
+ break;
}
/* This chip reports checksum status differently */
@@ -2201,13 +2206,6 @@ static int sky2_status_intr(struct sky2_
#endif
netif_receive_skb(skb);
- /* Update receiver after 16 frames */
- if (++buf_write[port] == RX_BUF_WRITE) {
-force_update:
- sky2_put_idx(hw, rxqaddr[port], sky2->rx_put);
- buf_write[port] = 0;
- }
-
/* Stop after net poll weight */
if (++work_done >= to_do)
goto exit_loop;
@@ -2263,24 +2261,18 @@ force_update:
if (net_ratelimit())
printk(KERN_WARNING PFX
"unknown status opcode 0x%x\n", le->opcode);
- goto exit_loop;
}
}
/* Fully processed status ring so clear irq */
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
- mmiowb();
exit_loop:
- if (buf_write[0]) {
- sky2 = netdev_priv(hw->dev[0]);
- sky2_put_idx(hw, Q_R1, sky2->rx_put);
- }
+ if (rx[0])
+ sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1);
- if (buf_write[1]) {
- sky2 = netdev_priv(hw->dev[1]);
- sky2_put_idx(hw, Q_R2, sky2->rx_put);
- }
+ if (rx[1])
+ sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2);
return work_done;
}
--
Stephen Hemminger <shemminger@linux-foundation.org>
next prev parent reply other threads:[~2007-07-09 22:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-09 22:33 [PATCH 00/12] sky2 driver updates for 2.6.23 Stephen Hemminger
2007-07-09 22:33 ` [PATCH 01/12] sky2: restore workarounds for lost interrupts Stephen Hemminger
2007-07-10 16:24 ` Jeff Garzik
2007-07-09 22:33 ` [PATCH 02/12] sky2: carrier management Stephen Hemminger
2007-07-09 22:33 ` [PATCH 03/12] sky2: debug interface Stephen Hemminger
2007-07-09 22:33 ` [PATCH 04/12] sky2: check for more work before leaving NAPI Stephen Hemminger
2007-07-09 22:33 ` Stephen Hemminger [this message]
2007-07-09 22:33 ` [PATCH 06/12] sky2: unmark as EXPERIMENTAL Stephen Hemminger
2007-07-09 22:33 ` [PATCH 07/12] sky2: add support for read/write of EEPROM Stephen Hemminger
2007-07-09 22:33 ` [PATCH 08/12] sky2: check drop truncated packets Stephen Hemminger
2007-07-09 22:33 ` [PATCH 09/12] sky2: use roundup() macro Stephen Hemminger
2007-07-09 22:33 ` [PATCH 10/12] sky2: use upper_32_bits() macro Stephen Hemminger
2007-07-09 22:33 ` [PATCH 11/12] sky2: remove some leftover debug messages Stephen Hemminger
2007-07-09 22:33 ` [PATCH 12/12] sky2: 1.16 version Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070709223453.290284388@linux-foundation.org \
--to=shemminger@linux-foundation.org \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.