All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 07/12] sky2: add support for read/write of EEPROM
Date: Mon, 09 Jul 2007 15:33:39 -0700	[thread overview]
Message-ID: <20070709223453.418635581@linux-foundation.org> (raw)
In-Reply-To: 20070709223332.966231494@linux-foundation.org

[-- Attachment #1: sky2-eeprom.patch --]
[-- Type: text/plain, Size: 4844 bytes --]

Add get/set eeprom support for sky2.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

---
 drivers/net/sky2.c |  140 +++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 115 insertions(+), 25 deletions(-)

--- a/drivers/net/sky2.c	2007-07-09 15:30:10.000000000 -0700
+++ b/drivers/net/sky2.c	2007-07-09 15:30:12.000000000 -0700
@@ -77,6 +77,9 @@
 #define NAPI_WEIGHT		64
 #define PHY_RETRIES		1000
 
+#define SKY2_EEPROM_MAGIC	0x9955aabb
+
+
 #define RING_NEXT(x,s)	(((x)+1) & ((s)-1))
 
 static const u32 default_msg =
@@ -3429,34 +3432,121 @@ static int sky2_set_tso(struct net_devic
 	return ethtool_op_set_tso(dev, data);
 }
 
+static int sky2_get_eeprom_len(struct net_device *dev)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	u16 reg2;
+
+	reg2 = sky2_pci_read32(sky2->hw, PCI_DEV_REG2);
+	return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
+}
+
+static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset)
+{
+	sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
+
+	while (!(sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F))
+			cpu_relax();
+	return sky2_pci_read32(hw, cap + PCI_VPD_DATA);
+}
+
+static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val)
+{
+	sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
+	sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
+	do {
+		cpu_relax();
+	} while (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F);
+}
+
+static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+			   u8 *data)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
+	int length = eeprom->len;
+	u16 offset = eeprom->offset;
+
+	if (!cap)
+		return -EINVAL;
+
+	eeprom->magic = SKY2_EEPROM_MAGIC;
+
+	while (length > 0) {
+		u32 val = sky2_vpd_read(sky2->hw, cap, offset);
+		int n = min_t(int, length, sizeof(val));
+
+		memcpy(data, &val, n);
+		length -= n;
+		data += n;
+		offset += n;
+	}
+	return 0;
+}
+
+static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+			   u8 *data)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
+	int length = eeprom->len;
+	u16 offset = eeprom->offset;
+
+	if (!cap)
+		return -EINVAL;
+
+	if (eeprom->magic != SKY2_EEPROM_MAGIC)
+		return -EINVAL;
+
+	while (length > 0) {
+		u32 val;
+		int n = min_t(int, length, sizeof(val));
+
+		if (n < sizeof(val))
+			val = sky2_vpd_read(sky2->hw, cap, offset);
+		memcpy(&val, data, n);
+
+		sky2_vpd_write(sky2->hw, cap, offset, val);
+
+		length -= n;
+		data += n;
+		offset += n;
+	}
+	return 0;
+}
+
+
 static const struct ethtool_ops sky2_ethtool_ops = {
-	.get_settings = sky2_get_settings,
-	.set_settings = sky2_set_settings,
-	.get_drvinfo  = sky2_get_drvinfo,
-	.get_wol      = sky2_get_wol,
-	.set_wol      = sky2_set_wol,
-	.get_msglevel = sky2_get_msglevel,
-	.set_msglevel = sky2_set_msglevel,
-	.nway_reset   = sky2_nway_reset,
-	.get_regs_len = sky2_get_regs_len,
-	.get_regs = sky2_get_regs,
-	.get_link = ethtool_op_get_link,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = sky2_set_tx_csum,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = sky2_set_tso,
-	.get_rx_csum = sky2_get_rx_csum,
-	.set_rx_csum = sky2_set_rx_csum,
-	.get_strings = sky2_get_strings,
-	.get_coalesce = sky2_get_coalesce,
-	.set_coalesce = sky2_set_coalesce,
-	.get_ringparam = sky2_get_ringparam,
-	.set_ringparam = sky2_set_ringparam,
+	.get_settings	= sky2_get_settings,
+	.set_settings	= sky2_set_settings,
+	.get_drvinfo	= sky2_get_drvinfo,
+	.get_wol	= sky2_get_wol,
+	.set_wol	= sky2_set_wol,
+	.get_msglevel	= sky2_get_msglevel,
+	.set_msglevel	= sky2_set_msglevel,
+	.nway_reset	= sky2_nway_reset,
+	.get_regs_len	= sky2_get_regs_len,
+	.get_regs	= sky2_get_regs,
+	.get_link	= ethtool_op_get_link,
+	.get_eeprom_len	= sky2_get_eeprom_len,
+	.get_eeprom	= sky2_get_eeprom,
+	.set_eeprom	= sky2_set_eeprom,
+	.get_sg 	= ethtool_op_get_sg,
+	.set_sg 	= ethtool_op_set_sg,
+	.get_tx_csum	= ethtool_op_get_tx_csum,
+	.set_tx_csum	= sky2_set_tx_csum,
+	.get_tso	= ethtool_op_get_tso,
+	.set_tso	= sky2_set_tso,
+	.get_rx_csum	= sky2_get_rx_csum,
+	.set_rx_csum	= sky2_set_rx_csum,
+	.get_strings	= sky2_get_strings,
+	.get_coalesce	= sky2_get_coalesce,
+	.set_coalesce	= sky2_set_coalesce,
+	.get_ringparam	= sky2_get_ringparam,
+	.set_ringparam	= sky2_set_ringparam,
 	.get_pauseparam = sky2_get_pauseparam,
 	.set_pauseparam = sky2_set_pauseparam,
-	.phys_id = sky2_phys_id,
+	.phys_id	= sky2_phys_id,
 	.get_stats_count = sky2_get_stats_count,
 	.get_ethtool_stats = sky2_get_ethtool_stats,
 	.get_perm_addr	= ethtool_op_get_perm_addr,

-- 
Stephen Hemminger <shemminger@linux-foundation.org>


  parent reply	other threads:[~2007-07-09 22:37 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-09 22:33 [PATCH 00/12] sky2 driver updates for 2.6.23 Stephen Hemminger
2007-07-09 22:33 ` [PATCH 01/12] sky2: restore workarounds for lost interrupts Stephen Hemminger
2007-07-10 16:24   ` Jeff Garzik
2007-07-09 22:33 ` [PATCH 02/12] sky2: carrier management Stephen Hemminger
2007-07-09 22:33 ` [PATCH 03/12] sky2: debug interface Stephen Hemminger
2007-07-09 22:33 ` [PATCH 04/12] sky2: check for more work before leaving NAPI Stephen Hemminger
2007-07-09 22:33 ` [PATCH 05/12] sky2: receive fill Stephen Hemminger
2007-07-09 22:33 ` [PATCH 06/12] sky2: unmark as EXPERIMENTAL Stephen Hemminger
2007-07-09 22:33 ` Stephen Hemminger [this message]
2007-07-09 22:33 ` [PATCH 08/12] sky2: check drop truncated packets Stephen Hemminger
2007-07-09 22:33 ` [PATCH 09/12] sky2: use roundup() macro Stephen Hemminger
2007-07-09 22:33 ` [PATCH 10/12] sky2: use upper_32_bits() macro Stephen Hemminger
2007-07-09 22:33 ` [PATCH 11/12] sky2: remove some leftover debug messages Stephen Hemminger
2007-07-09 22:33 ` [PATCH 12/12] sky2: 1.16 version Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070709223453.418635581@linux-foundation.org \
    --to=shemminger@linux-foundation.org \
    --cc=jgarzik@pobox.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.