[PATCH 1/3] sky2: clear PCI power control reg at startup

[Stephen Hemminger <shemminger@linux-foundation.org>]

[-- Attachment #1: sky2-phy-power.patch --]
[-- Type: text/plain, Size: 1022 bytes --]

Make sure PCI register for PHY power gets cleared on boot, and make
sure to avoid any PCI posting problems.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>


--- a/drivers/net/sky2.c	2007-08-21 10:17:59.000000000 -0700
+++ b/drivers/net/sky2.c	2007-08-21 10:18:02.000000000 -0700
@@ -219,9 +219,12 @@ static void sky2_power_on(struct sky2_hw
 	else
 		sky2_write8(hw, B2_Y2_CLK_GATE, 0);
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+	    hw->chip_id == CHIP_ID_YUKON_EX) {
 		u32 reg;
 
+		sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
 		reg = sky2_pci_read32(hw, PCI_DEV_REG4);
 		/* set all bits to 0 except bits 15..12 and 8 */
 		reg &= P_ASPM_CONTROL_MSK;
@@ -238,6 +241,8 @@ static void sky2_power_on(struct sky2_hw
 		reg = sky2_read32(hw, B2_GP_IO);
 		reg |= GLB_GPIO_STAT_RACE_DIS;
 		sky2_write32(hw, B2_GP_IO, reg);
+
+		sky2_read32(hw, B2_GP_IO);
 	}
 }
 

-- 
Stephen Hemminger <shemminger@linux-foundation.org>