All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chr <chunkeey@web.de>
To: Hans de Goede <j.w.r.degoede@hhs.nl>
Cc: Michael Wu <flamingice@sourmilk.net>, linux-wireless@vger.kernel.org
Subject: Re: Recent linux-wireless git changes have broken my prism54pci card
Date: Tue, 28 Aug 2007 21:32:59 +0200	[thread overview]
Message-ID: <200708282132.59474.chunkeey@web.de> (raw)
In-Reply-To: <46CEA8A2.3040906@hhs.nl>

[-- Attachment #1: Type: text/plain, Size: 515 bytes --]

On Friday, 24. August 2007, Hans de Goede wrote:
> Chr wrote:
> 
> Its a Sitecom WL-140 V2 (small letters at the bottom right of the front of the 
> box) aka the Sitecom Nitro XM 140G+
> 
> Note I think that the V2 is important to get the same one as mine, otherwise 
> you probably get an older fullmac version (if they still sell that anyware).
> 

Here we are:

series:
p54-pull-padding2.diff
p54-support-older-firmwares.diff

Signed-off will follow on friday/saturday... Michael, any complains?

Regards,
	Chr.

[-- Attachment #2: p54-pull-padding2.diff --]
[-- Type: text/x-diff, Size: 3109 bytes --]

diff -Nurp a/drivers/net/wireless/p54common.c b/drivers/net/wireless/p54common.c
--- a/drivers/net/wireless/p54common.c	2007-08-18 20:44:04.000000000 +0200
+++ b/drivers/net/wireless/p54common.c	2007-08-28 21:08:00.000000000 +0200
@@ -283,12 +283,13 @@ static void p54_rx_data(struct ieee80211
 	struct ieee80211_rx_status rx_status = {0};
 	u16 freq = le16_to_cpu(hdr->freq);
 
-	rx_status.ssi = hdr->rssi;	/* TODO: check this */
+	rx_status.ssi = hdr->rssi;
 	rx_status.rate = hdr->rate & 0x1f; /* report short preambles & CCK too */
 	rx_status.channel = freq == 2484 ? 14 : (freq - 2407)/5;
 	rx_status.freq = freq;
 	rx_status.phymode = MODE_IEEE80211G;
 	rx_status.antenna = hdr->antenna;
+	rx_status.mactime = le64_to_cpu(hdr->timestamp);
 
 	skb_pull(skb, sizeof(*hdr));
 	skb_trim(skb, le16_to_cpu(hdr->len));
@@ -324,6 +325,9 @@ static void p54_rx_frame_sent(struct iee
 		range = (struct memrecord *)&entry->cb;
 		if (range->start_addr == addr) {
 			struct ieee80211_tx_status status = {{0}};
+			struct p54_control_hdr *entry_hdr;
+			struct p54_tx_control_allocdata *entry_data;
+			int pad = 0;
 
 			if (entry->next != (struct sk_buff *)&priv->tx_queue)
 				freed = ((struct memrecord *)&entry->next->cb)->start_addr - last_addr;
@@ -339,14 +343,22 @@ static void p54_rx_frame_sent(struct iee
 			memcpy(&status.control, range->control,
 			       sizeof(status.control));
 			kfree(range->control);
-			if (!payload->status)
-				status.flags |= IEEE80211_TX_STATUS_ACK;
-			else
-				status.excessive_retries = 1;
+			priv->tx_stats.data[status.control.queue].len--;
+
+			entry_hdr = (struct p54_control_hdr *) entry->data;
+			entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
+			if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
+				pad = entry_data->align[0];
+
+			if (!status.control.flags & IEEE80211_TXCTL_NO_ACK) {
+				if (!(payload->status & 0x01))
+					status.flags |= IEEE80211_TX_STATUS_ACK;
+				else
+					status.excessive_retries = 1;
+			}
 			status.retry_count = payload->retries - 1;
 			status.ack_signal = le16_to_cpu(payload->ack_rssi);
-			skb_pull(entry, sizeof(*hdr) + sizeof(struct p54_tx_control_allocdata));
-			priv->tx_stats.data[status.control.queue].len--;
+			skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
 			ieee80211_tx_status_irqsafe(dev, entry, &status);
 			break;
 		} else
@@ -897,7 +909,7 @@ struct ieee80211_hw *p54_init_common(siz
 		    IEEE80211_HW_DATA_NULLFUNC_ACK; /* TODO: check */
 		    /* IEEE80211_HW_MONITOR_DURING_OPER FIXME: check */
 	dev->channel_change_time = 1000;	/* TODO: find actual value */
-	dev->max_rssi = 100;
+	dev->max_rssi = 127;
 
 	/* (hard) queue limits */
 	priv->tx_stats.data[0].limit = 3;
diff -Nurp a/drivers/net/wireless/p54common.h b/drivers/net/wireless/p54common.h
--- a/drivers/net/wireless/p54common.h	2007-08-18 20:44:04.000000000 +0200
+++ b/drivers/net/wireless/p54common.h	2007-08-28 19:53:13.000000000 +0200
@@ -168,7 +168,7 @@ struct p54_rx_hdr {
 	u8 antenna;
 	u8 rate;
 	u8 rssi;
-	u8 padding;
+	u8 quality;
 	u16 unknown2;
 	__le64 timestamp;
 	u8 data[0];

[-- Attachment #3: p54-support-older-firmwares.diff --]
[-- Type: text/x-diff, Size: 3633 bytes --]

diff -Nurp a/drivers/net/wireless/p54common.c b/drivers/net/wireless/p54common.c
--- a/drivers/net/wireless/p54common.c	2007-08-28 21:08:00.000000000 +0200
+++ b/drivers/net/wireless/p54common.c	2007-08-28 21:11:06.000000000 +0200
@@ -30,9 +30,12 @@ MODULE_ALIAS("prism54common");
 void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 {
 	struct p54_common *priv = dev->priv;
+	struct bootrec_exp_if *exp_if;
 	struct bootrec *bootrec;
 	u32 *data = (u32 *)fw->data;
 	u32 *end_data = (u32 *)fw->data + (fw->size >> 2);
+	size_t len;
+	int i;
 
 	if (priv->rx_start)
 		return;
@@ -46,7 +49,7 @@ void p54_parse_firmware(struct ieee80211
 	bootrec = (struct bootrec *) data;
 
 	while (bootrec->data <= end_data &&
-	       (bootrec->data + le32_to_cpu(bootrec->len)) <= end_data) {
+	       (bootrec->data + (len = le32_to_cpu(bootrec->len))) <= end_data) {
 		u32 code = le32_to_cpu(bootrec->code);
 		switch (code) {
 		case BR_CODE_COMPONENT_ID:
@@ -69,6 +72,11 @@ void p54_parse_firmware(struct ieee80211
 			}
 			break;
 		case BR_CODE_COMPONENT_VERSION:
+			priv->fw_version = kmalloc(len * 4, GFP_KERNEL);
+			if (!priv->fw_version)
+				return ;
+			snprintf(priv->fw_version, len * 4, "%s",
+				(unsigned char*)bootrec->data);
 			break;
 		case BR_CODE_DESCR:
 			priv->rx_start = le32_to_cpu(bootrec->data[1]);
@@ -76,6 +84,10 @@ void p54_parse_firmware(struct ieee80211
 			priv->rx_end = le32_to_cpu(bootrec->data[2]) - 0x3500;
 			break;
 		case BR_CODE_EXPOSED_IF:
+			exp_if = (struct bootrec_exp_if *) bootrec->data;
+			for (i = 0; i < (len * sizeof(*exp_if) / 4); i++)
+				if (exp_if[i].if_id == 0x1a)
+					priv->fw_variant = le16_to_cpu(exp_if[i].variant);
 			break;
 		case BR_CODE_DEPENDENT_IF:
 			break;
@@ -86,8 +98,25 @@ void p54_parse_firmware(struct ieee80211
 		default:
 			break;
 		}
-		bootrec = (struct bootrec *)&bootrec->data[le32_to_cpu(bootrec->len)];
+		bootrec = (struct bootrec *)&bootrec->data[len];
+	}
+
+	if (priv->fw_version)
+		printk(KERN_INFO "p54: Rev %s - Softmac protocol %x\n",
+			priv->fw_version, priv->fw_variant);
+		
+	/* Firmware supports QoS, enable it! */
+	if (priv->fw_variant >= 0x300) {
+		/* queue limits */
+		priv->tx_stats.data[0].limit = 3;
+		priv->tx_stats.data[1].limit = 4;
+		priv->tx_stats.data[2].limit = 3;
+		priv->tx_stats.data[3].limit = 1;
+		
+		dev->queues = 4;
 	}
+
+
 }
 EXPORT_SYMBOL_GPL(p54_parse_firmware);
 
@@ -911,13 +940,9 @@ struct ieee80211_hw *p54_init_common(siz
 	dev->channel_change_time = 1000;	/* TODO: find actual value */
 	dev->max_rssi = 127;
 
-	/* (hard) queue limits */
-	priv->tx_stats.data[0].limit = 3;
-	priv->tx_stats.data[1].limit = 4;
-	priv->tx_stats.data[2].limit = 3;
-	priv->tx_stats.data[3].limit = 1;
+	priv->tx_stats.data[0].limit = 10;
+	dev->queues = 1;
 
-	dev->queues = 4;
 	dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 +
 				 sizeof(struct p54_tx_control_allocdata);
 
@@ -950,6 +975,7 @@ void p54_free_common(struct ieee80211_hw
 	kfree(priv->output_limit);
 	kfree(priv->curve_data);
 	kfree(priv->cached_vdcf);
+	kfree(priv->fw_version);
 }
 EXPORT_SYMBOL_GPL(p54_free_common);
 
diff -Nurp a/drivers/net/wireless/p54.h b/drivers/net/wireless/p54.h
--- a/drivers/net/wireless/p54.h	2007-08-28 12:00:54.000000000 +0200
+++ b/drivers/net/wireless/p54.h	2007-08-28 20:17:37.000000000 +0200
@@ -62,6 +62,8 @@ struct p54_common {
 	u8 version;
 	unsigned int tx_hdr_len;
 	void *cached_vdcf;
+	u8 *fw_version;
+	__le16 fw_variant;
 	/* FIXME: this channels/modes/rates stuff sucks */
 	struct ieee80211_channel channels[14];
 	struct ieee80211_rate rates[12];

  reply	other threads:[~2007-08-28 19:34 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-13  5:50 Recent linux-wireless git changes have broken my prism54pci card Hans de Goede
2007-08-13  6:18 ` Michael Wu
2007-08-13  6:33   ` Hans de Goede
2007-08-13  6:46     ` Andy Green
2007-08-13  7:49       ` Hans de Goede
2007-08-13  7:58         ` Michael Wu
2007-08-13  8:05           ` Andy Green
2007-08-13 11:58           ` Hans de Goede
2007-08-13 20:14             ` Michael Wu
2007-08-13 22:25               ` Chr
2007-08-14  8:10                 ` Hans de Goede
2007-08-14 18:29                   ` Chr
2007-08-20  0:44                   ` Chr
2007-08-20  2:32                     ` Larry Finger
2007-08-20  7:52                     ` Hans de Goede
2007-08-20 11:51                       ` Chr
2007-08-20 12:17                         ` Johannes Berg
2007-08-20 22:14                           ` Chr
2007-08-23 11:24                         ` Hans de Goede
2007-08-23 14:43                           ` Chr
2007-08-23 14:36                             ` Hans de Goede
2007-08-23 21:52                             ` Hans de Goede
2007-08-23 23:00                               ` Chr
2007-08-24  9:45                                 ` Hans de Goede
2007-08-28 19:32                                   ` Chr [this message]
2007-08-30  5:52                                     ` Michael Wu
2007-08-30 11:16                                       ` Chr
2007-08-31 21:27                                       ` [PATCH 1/2] p54: various fixes Chr
2007-08-31 21:27                                       ` [PATCH 2/2] p54: disable QoS on older firmwares Chr
2007-09-01  4:58                                         ` Michael Wu
2007-09-01 16:54                                           ` [PATCH 2/2 v2] " Chr
2007-08-13 13:14       ` Recent linux-wireless git changes have broken my prism54pci card Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200708282132.59474.chunkeey@web.de \
    --to=chunkeey@web.de \
    --cc=flamingice@sourmilk.net \
    --cc=j.w.r.degoede@hhs.nl \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.