All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chr <chunkeey@web.de>
To: Michael Wu <flamingice@sourmilk.net>
Cc: Hans de Goede <j.w.r.degoede@hhs.nl>,
	linux-wireless@vger.kernel.org,
	John Linville <linville@tuxdriver.com>
Subject: [PATCH 1/2] p54: various fixes
Date: Fri, 31 Aug 2007 23:27:14 +0200	[thread overview]
Message-ID: <200708312327.14559.chunkeey@web.de> (raw)
In-Reply-To: <200708300152.27736.flamingice@sourmilk.net>

[-- Attachment #1: Type: text/plain, Size: 342 bytes --]

From: Christian Lamparter <chunkeey@web.de>

This patch should finally fix the mysterious "stuck at 1 mbps" and numerous of
"lost" ACKs (very important for the not yet released p54 AP addon).

The patch also includes a bunch of useful one liners that did not make it in the tree yet.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
---

[-- Attachment #2: p54-forgotten-patch4.diff --]
[-- Type: text/x-diff, Size: 3145 bytes --]

diff -Nurp a/drivers/net/wireless/p54common.c b/drivers/net/wireless/p54common.c
--- a/drivers/net/wireless/p54common.c	2007-08-31 21:56:42.000000000 +0200
+++ b/drivers/net/wireless/p54common.c	2007-08-31 21:57:29.000000000 +0200
@@ -283,12 +283,13 @@ static void p54_rx_data(struct ieee80211
 	struct ieee80211_rx_status rx_status = {0};
 	u16 freq = le16_to_cpu(hdr->freq);
 
-	rx_status.ssi = hdr->rssi;	/* TODO: check this */
+	rx_status.ssi = hdr->rssi;
 	rx_status.rate = hdr->rate & 0x1f; /* report short preambles & CCK too */
 	rx_status.channel = freq == 2484 ? 14 : (freq - 2407)/5;
 	rx_status.freq = freq;
 	rx_status.phymode = MODE_IEEE80211G;
 	rx_status.antenna = hdr->antenna;
+	rx_status.mactime = le64_to_cpu(hdr->timestamp);
 
 	skb_pull(skb, sizeof(*hdr));
 	skb_trim(skb, le16_to_cpu(hdr->len));
@@ -324,6 +325,9 @@ static void p54_rx_frame_sent(struct iee
 		range = (struct memrecord *)&entry->cb;
 		if (range->start_addr == addr) {
 			struct ieee80211_tx_status status = {{0}};
+			struct p54_control_hdr *entry_hdr;
+			struct p54_tx_control_allocdata *entry_data;
+			int pad = 0;
 
 			if (entry->next != (struct sk_buff *)&priv->tx_queue)
 				freed = ((struct memrecord *)&entry->next->cb)->start_addr - last_addr;
@@ -339,14 +343,22 @@ static void p54_rx_frame_sent(struct iee
 			memcpy(&status.control, range->control,
 			       sizeof(status.control));
 			kfree(range->control);
-			if (!payload->status)
-				status.flags |= IEEE80211_TX_STATUS_ACK;
-			else
-				status.excessive_retries = 1;
+			priv->tx_stats.data[status.control.queue].len--;
+
+			entry_hdr = (struct p54_control_hdr *) entry->data;
+			entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
+			if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
+				pad = entry_data->align[0];
+
+			if (!status.control.flags & IEEE80211_TXCTL_NO_ACK) {
+				if (!(payload->status & 0x01))
+					status.flags |= IEEE80211_TX_STATUS_ACK;
+				else
+					status.excessive_retries = 1;
+			}
 			status.retry_count = payload->retries - 1;
 			status.ack_signal = le16_to_cpu(payload->ack_rssi);
-			skb_pull(entry, sizeof(*hdr) + sizeof(struct p54_tx_control_allocdata));
-			priv->tx_stats.data[status.control.queue].len--;
+			skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
 			ieee80211_tx_status_irqsafe(dev, entry, &status);
 			break;
 		} else
@@ -895,7 +907,7 @@ struct ieee80211_hw *p54_init_common(siz
 		    IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_WEP_INCLUDE_IV;
 	dev->channel_change_time = 1000;	/* TODO: find actual value */
-	dev->max_rssi = 100;
+	dev->max_rssi = 127;
 
 	/* (hard) queue limits */
 	priv->tx_stats.data[0].limit = 3;
diff -Nurp a/drivers/net/wireless/p54common.h b/drivers/net/wireless/p54common.h
--- a/drivers/net/wireless/p54common.h	2007-08-18 20:44:04.000000000 +0200
+++ b/drivers/net/wireless/p54common.h	2007-08-28 19:53:13.000000000 +0200
@@ -168,7 +168,7 @@ struct p54_rx_hdr {
 	u8 antenna;
 	u8 rate;
 	u8 rssi;
-	u8 padding;
+	u8 quality;
 	u16 unknown2;
 	__le64 timestamp;
 	u8 data[0];

  parent reply	other threads:[~2007-08-31 21:27 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-13  5:50 Recent linux-wireless git changes have broken my prism54pci card Hans de Goede
2007-08-13  6:18 ` Michael Wu
2007-08-13  6:33   ` Hans de Goede
2007-08-13  6:46     ` Andy Green
2007-08-13  7:49       ` Hans de Goede
2007-08-13  7:58         ` Michael Wu
2007-08-13  8:05           ` Andy Green
2007-08-13 11:58           ` Hans de Goede
2007-08-13 20:14             ` Michael Wu
2007-08-13 22:25               ` Chr
2007-08-14  8:10                 ` Hans de Goede
2007-08-14 18:29                   ` Chr
2007-08-20  0:44                   ` Chr
2007-08-20  2:32                     ` Larry Finger
2007-08-20  7:52                     ` Hans de Goede
2007-08-20 11:51                       ` Chr
2007-08-20 12:17                         ` Johannes Berg
2007-08-20 22:14                           ` Chr
2007-08-23 11:24                         ` Hans de Goede
2007-08-23 14:43                           ` Chr
2007-08-23 14:36                             ` Hans de Goede
2007-08-23 21:52                             ` Hans de Goede
2007-08-23 23:00                               ` Chr
2007-08-24  9:45                                 ` Hans de Goede
2007-08-28 19:32                                   ` Chr
2007-08-30  5:52                                     ` Michael Wu
2007-08-30 11:16                                       ` Chr
2007-08-31 21:27                                       ` Chr [this message]
2007-08-31 21:27                                       ` [PATCH 2/2] p54: disable QoS on older firmwares Chr
2007-09-01  4:58                                         ` Michael Wu
2007-09-01 16:54                                           ` [PATCH 2/2 v2] " Chr
2007-08-13 13:14       ` Recent linux-wireless git changes have broken my prism54pci card Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200708312327.14559.chunkeey@web.de \
    --to=chunkeey@web.de \
    --cc=flamingice@sourmilk.net \
    --cc=j.w.r.degoede@hhs.nl \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.