From: Andrew Morton <akpm@linux-foundation.org>
To: linux-ide@vger.kernel.org
Cc: "Sumanth J.V" <sumanth@cse.unl.edu>
Subject: Fw: Spurious completions during NCQ
Date: Sat, 15 Sep 2007 00:57:51 -0700 [thread overview]
Message-ID: <20070915005751.353d0c69.akpm@linux-foundation.org> (raw)
Begin forwarded message:
Date: Fri, 07 Sep 2007 12:57:14 -0500
From: "Sumanth J.V" <sumanth@cse.unl.edu>
To: linux-kernel@vger.kernel.org
Subject: Spurious completions during NCQ
I keep seeing this message a few times a day on my box.
ata1.00: exception Emask 0x2 SAct 0x18 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x18
FIS=004040a1:00000004)
ata1.00: cmd 60/08:18:bf:04:df/00:00:23:00:00/40 tag 3 cdb 0x0 data 4096 in
res 40/00:24:c7:04:df/00:00:23:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/78:20:c7:04:df/00:00:23:00:00/40 tag 4 cdb 0x0 data 61440 in
res 40/00:24:c7:04:df/00:00:23:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
Can I assume that my data integrity is not compromised? Any idea what is
happening to the pending writes during the soft reset? How can I verify
that all the pending writes were committed?
I have attached the output of my dmesg, lspci, sdparm and mdadm. Do let
me know if you need any other info?
Regards,
Sumanth
------------ dmesg output: --------------------
Linux version 2.6.22.4-65.fc7
(kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502
(Red Hat 4.1.2-12)) #1 SMP Tue Aug 21 21:50:50 EDT 2007
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Entering add_active_range(0, 256, 917216) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
end_pfn_map = 1179648
DMI 2.4 present.
ACPI: RSDP 000F6F10, 0014 (r0 GBT )
ACPI: RSDT DFEE3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: FACP DFEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: DSDT DFEE3180, 4A88 (r1 GBT GBTUACPI 1000 MSFT 100000C)
ACPI: FACS DFEE0000, 0040
ACPI: HPET DFEE7D80, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
ACPI: MCFG DFEE7E00, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: APIC DFEE7C80, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: SSDT DFEE7E80, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311)
ACPI: SSDT DFEE8430, 0275 (r1 PmRef CpuPm 3000 INTL 20040311)
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Entering add_active_range(0, 256, 917216) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
Bootmem setup node 0 0000000000000000-0000000120000000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1179648
early_node_map[3] active PFN ranges
0: 0 -> 158
0: 256 -> 917216
0: 1048576 -> 1179648
On node 0 totalpages: 1048190
DMA zone: 56 pages used for memmap
DMA zone: 1303 pages reserved
DMA zone: 2639 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 898840 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000dfee0000 - 00000000dfee3000
swsusp: Registered nosave memory region: 00000000dfee3000 - 00000000dfef0000
swsusp: Registered nosave memory region: 00000000dfef0000 - 00000000dff00000
swsusp: Registered nosave memory region: 00000000dff00000 - 00000000f0000000
swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000
swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: dff00000:10100000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 40968 bytes of per cpu data
Built 1 zonelists. Total pages: 1030759
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2399.997 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1047000 - 0x5047000
Memory: 4060052k/4718592k available (2362k kernel code, 132708k
reserved, 1399k data, 312k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 4802.61 BogoMIPS
(lpj=2401307)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 16666627
Detected 16.666 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.04 BogoMIPS
(lpj=2400022)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x3
Initializing CPU#2
Calibrating delay using timer specific routine.. 4799.98 BogoMIPS
(lpj=2399991)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 2/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU2: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x1
Initializing CPU#3
Calibrating delay using timer specific routine.. 4799.98 BogoMIPS
(lpj=2399991)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 3/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2048 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at f0000000 - f3ffffff
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
pnp: 00:08: ioport range 0x400-0x4bf has been reserved
pnp: 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
pnp: 00:0a: iomem range 0xd5000-0xd7fff has been reserved
pnp: 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: b000-bfff
MEM window: f4000000-f7ffffff
PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:1c.0
IO window: a000-afff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: c000-cfff
MEM window: fa000000-fa0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: d000-dfff
MEM window: f8000000-f9ffffff
PREFETCH window: fa200000-fa2fffff
PCI: Bridge: 0000:00:1e.0
IO window: 9000-9fff
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3779k freed
audit: initializing netlink socket (disabled)
audit(1189149752.663:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 34BBEB243C265B53
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: SSDT DFEE8280, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
ACPI: Processor [CPU1] (supports 2 throttling states)
ACPI: SSDT DFEE8310, 0087 (r1 PmRef Cpu2Ist 3000 INTL 20040311)
ACPI: Processor [CPU2] (supports 2 throttling states)
ACPI: SSDT DFEE83A0, 0087 (r1 PmRef Cpu3Ist 3000 INTL 20040311)
ACPI: Processor [CPU3] (supports 2 throttling states)
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 312k freed
Write protecting the kernel read-only data: 1060k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa104000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa105000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
usb 1-1: USB disconnect, address 2
SCSI subsystem initialized
libata version 2.21 loaded.
ahci 0000:00:1f.2: version 2.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
usb 1-1: new low speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1
input: Logitech USB Receiver as /class/input/input4
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1
usb 1-2: new low speed USB device using uhci_hcd and address 4
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA
mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc20000638100 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 2299
ata2: SATA max UDMA/133 cmd 0xffffc20000638180 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 2299
ata3: SATA max UDMA/133 cmd 0xffffc20000638200 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 2299
ata4: SATA max UDMA/133 cmd 0xffffc20000638280 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 2299
ata5: SATA max UDMA/133 cmd 0xffffc20000638300 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 2299
ata6: SATA max UDMA/133 cmd 0xffffc20000638380 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 2299
usb 1-2: configuration #1 chosen from 1 choice
hiddev96: USB HID v1.10 Device [CPS CP 1500C] on usb-0000:00:1a.0-2
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: WDC WD5000AAKS-22TMA0, 12.01C01, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3500641AS, 3.AAE, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3500641AS, 3.AAE, max UDMA/133
ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3500630AS, 3.AAE, max UDMA/133
ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 2:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
scsi 3:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 4:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
scsi 5:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 5:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 cmd 0xffffc2000063c100 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 19
ata8: SATA max UDMA/133 cmd 0xffffc2000063c180 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 19
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: Host Protected Area detected:
current size: 488395055 sectors
native size: 488397168 sectors
ata7.00: ATA-7: ST3250824AS, 3.AAH, max UDMA/133
ata7.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata7.00: Host Protected Area detected:
current size: 488395055 sectors
native size: 488397168 sectors
ata7.00: configured for UDMA/133
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: Host Protected Area detected:
current size: 976771055 sectors
native size: 976773168 sectors
ata8.00: ATA-7: Maxtor 7H500F0, HA431DN0, max UDMA/133
ata8.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata8.00: Host Protected Area detected:
current size: 976771055 sectors
native size: 976773168 sectors
ata8.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA ST3250824AS 3.AA PQ: 0 ANSI: 5
sd 6:0:0:0: [sdg] 488395055 512-byte hardware sectors (250058 MB)
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 6:0:0:0: [sdg] 488395055 512-byte hardware sectors (250058 MB)
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdg: sdg1 sdg2
sd 6:0:0:0: [sdg] Attached SCSI disk
scsi 7:0:0:0: Direct-Access ATA Maxtor 7H500F0 HA43 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdh] 976771055 512-byte hardware sectors (500107 MB)
sd 7:0:0:0: [sdh] Write Protect is off
sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 7:0:0:0: [sdh] 976771055 512-byte hardware sectors (500107 MB)
sd 7:0:0:0: [sdh] Write Protect is off
sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdh: sdh1
sd 7:0:0:0: [sdh] Attached SCSI disk
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0x000000000001c000 ctl 0x000000000001c102
bmdma 0x000000000001c400 irq 16
ata10: PATA max UDMA/100 cmd 0x000000000001c200 ctl 0x000000000001c302
bmdma 0x000000000001c408 irq 16
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1189149769.878:2): selinux=0 auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 6:0:0:0: Attached scsi generic sg6 type 0
sd 7:0:0:0: Attached scsi generic sg7 type 0
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: RTL8168b/8111b at 0xffffc20000640000, 00:1a:4d:4a:de:27, IRQ 16
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13
16:33:22 PDT 2007
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
floppy0: no floppy controllers found
No dock devices found.
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PWRB]
md: md0 stopped.
md: bind<sdb1>
md: bind<sdc1>
md: bind<sdd1>
md: bind<sde1>
md: bind<sdf1>
md: bind<sdh1>
md: bind<sda1>
raid5: automatically using best checksumming function: generic_sse
generic_sse: 8536.000 MB/sec
raid5: using function: generic_sse (8536.000 MB/sec)
raid6: int64x1 2046 MB/s
raid6: int64x2 2734 MB/s
raid6: int64x4 2316 MB/s
raid6: int64x8 1875 MB/s
raid6: sse2x1 3750 MB/s
raid6: sse2x2 5410 MB/s
raid6: sse2x4 7113 MB/s
raid6: using algorithm sse2x4 (7113 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: device sda1 operational as raid disk 0
raid5: device sdh1 operational as raid disk 6
raid5: device sdf1 operational as raid disk 5
raid5: device sde1 operational as raid disk 4
raid5: device sdd1 operational as raid disk 3
raid5: device sdc1 operational as raid disk 2
raid5: device sdb1 operational as raid disk 1
raid5: allocated 7412kB for md0
raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2
RAID5 conf printout:
--- rd:7 wd:7
disk 0, o:1, dev:sda1
disk 1, o:1, dev:sdb1
disk 2, o:1, dev:sdc1
disk 3, o:1, dev:sdd1
disk 4, o:1, dev:sde1
disk 5, o:1, dev:sdf1
disk 6, o:1, dev:sdh1
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdg1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
across:2031608k
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
r8169: eth0: link up
r8169: eth0: link up
audit(1189149788.812:3): audit_pid=2221 old=0 by auid=4294967295
/dev/vmmon[2374]: VMCI: Driver initialized.
/dev/vmmon[2374]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[2374]: Module vmmon: initialized
/dev/vmnet: open called by PID 2434 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 2450 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2455 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
it87: Found IT8718F chip at 0x290, revision 4
it87: in3 is VCC (+5V)
coretemp coretemp.0: Using undocumented features, absolute temperature
might be wrong!
coretemp coretemp.1: Using undocumented features, absolute temperature
might be wrong!
coretemp coretemp.2: Using undocumented features, absolute temperature
might be wrong!
coretemp coretemp.3: Using undocumented features, absolute temperature
might be wrong!
eth0: no IPv6 routers present
/dev/vmnet: open called by PID 2707 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
vmnet8: no IPv6 routers present
i2c-adapter i2c-1: SMBus Quick command not supported, can't probe for chips
i2c-adapter i2c-2: SMBus Quick command not supported, can't probe for chips
i2c-adapter i2c-3: SMBus Quick command not supported, can't probe for chips
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/vmnet: open called by PID 3754 (vmware-vmx)
device eth0 entered promiscuous mode
bridge-eth0: enabled promiscuous mode
/dev/vmnet: port on hub 0 successfully opened
/dev/vmmon[3860]: host clock rate change request 0 -> 19
/dev/vmmon[3860]: host clock rate change request 19 -> 83
usb 8-4: new high speed USB device using ehci_hcd and address 2
usb 8-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 10:0:0:0: Direct-Access SAMSUNG HD501LJ 0-10 PQ: 0
ANSI: 2 CCS
sd 10:0:0:0: [sdi] 976773168 512-byte hardware sectors (500108 MB)
sd 10:0:0:0: [sdi] Write Protect is off
sd 10:0:0:0: [sdi] Mode Sense: 00 38 00 00
sd 10:0:0:0: [sdi] Assuming drive cache: write through
sd 10:0:0:0: [sdi] 976773168 512-byte hardware sectors (500108 MB)
sd 10:0:0:0: [sdi] Write Protect is off
sd 10:0:0:0: [sdi] Mode Sense: 00 38 00 00
sd 10:0:0:0: [sdi] Assuming drive cache: write through
sdi: sdi1
sd 10:0:0:0: [sdi] Attached SCSI disk
sd 10:0:0:0: Attached scsi generic sg8 type 0
usb 8-2: new high speed USB device using ehci_hcd and address 3
usb 8-2: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 11:0:0:0: Direct-Access ST332082 0A 0000 PQ: 0
ANSI: 0
sd 11:0:0:0: [sdj] 625142448 512-byte hardware sectors (320073 MB)
sd 11:0:0:0: [sdj] Write Protect is off
sd 11:0:0:0: [sdj] Mode Sense: 27 00 00 00
sd 11:0:0:0: [sdj] Assuming drive cache: write through
sd 11:0:0:0: [sdj] 625142448 512-byte hardware sectors (320073 MB)
sd 11:0:0:0: [sdj] Write Protect is off
sd 11:0:0:0: [sdj] Mode Sense: 27 00 00 00
sd 11:0:0:0: [sdj] Assuming drive cache: write through
sdj: sdj1
sd 11:0:0:0: [sdj] Attached SCSI disk
sd 11:0:0:0: Attached scsi generic sg9 type 0
fuse init (API version 7.8)
usb 7-3: new high speed USB device using ehci_hcd and address 4
usb 7-3: configuration #1 chosen from 1 choice
scsi12 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 12:0:0:0: Direct-Access ST320082 2A 3.01 PQ: 0
ANSI: 0 CCS
sd 12:0:0:0: [sdk] 390721968 512-byte hardware sectors (200050 MB)
sd 12:0:0:0: [sdk] Write Protect is off
sd 12:0:0:0: [sdk] Mode Sense: 00 14 00 00
sd 12:0:0:0: [sdk] Assuming drive cache: write through
sd 12:0:0:0: [sdk] 390721968 512-byte hardware sectors (200050 MB)
sd 12:0:0:0: [sdk] Write Protect is off
sd 12:0:0:0: [sdk] Mode Sense: 00 14 00 00
sd 12:0:0:0: [sdk] Assuming drive cache: write through
sdk: sdk1
sd 12:0:0:0: [sdk] Attached SCSI disk
sd 12:0:0:0: Attached scsi generic sg10 type 0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdk1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ata1.00: exception Emask 0x2 SAct 0x18 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x18
FIS=004040a1:00000004)
ata1.00: cmd 60/08:18:bf:04:df/00:00:23:00:00/40 tag 3 cdb 0x0 data 4096 in
res 40/00:24:c7:04:df/00:00:23:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/78:20:c7:04:df/00:00:23:00:00/40 tag 4 cdb 0x0 data 61440 in
res 40/00:24:c7:04:df/00:00:23:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
ata7: illegal qc_active transition (00000007->ffffffff)
ata7.00: exception Emask 0x2 SAct 0x7 SErr 0x0 action 0x2 frozen
ata7.00: cmd 61/08:00:bd:f1:44/00:00:00:00:00/40 tag 0 cdb 0x0 data 4096 out
res 40/00:00:bd:f1:44/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata7.00: cmd 61/10:08:fd:1f:10/00:00:15:00:00/40 tag 1 cdb 0x0 data 8192 out
res 40/00:00:bd:f1:44/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata7.00: cmd 61/10:10:85:f1:44/00:00:00:00:00/40 tag 2 cdb 0x0 data 8192 out
res 40/00:00:bd:f1:44/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata7: soft resetting port
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: Host Protected Area detected:
current size: 488395055 sectors
native size: 488397168 sectors
ata7.00: Host Protected Area detected:
current size: 488395055 sectors
native size: 488397168 sectors
ata7.00: configured for UDMA/133
ata7: EH complete
sd 6:0:0:0: [sdg] 488395055 512-byte hardware sectors (250058 MB)
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
ata7: illegal qc_active transition (00000001->ffffffff)
ata7.00: exception Emask 0x2 SAct 0x1 SErr 0x0 action 0x2 frozen
ata7.00: cmd 61/10:00:bd:22:bf/00:00:15:00:00/40 tag 0 cdb 0x0 data 8192 out
res 40/00:00:bd:22:bf/00:00:15:00:00/40 Emask 0x2 (HSM violation)
ata7: soft resetting port
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: Host Protected Area detected:
current size: 488395055 sectors
native size: 488397168 sectors
ata7.00: Host Protected Area detected:
current size: 488395055 sectors
native size: 488397168 sectors
ata7.00: configured for UDMA/133
ata7: EH complete
sd 6:0:0:0: [sdg] 488395055 512-byte hardware sectors (250058 MB)
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
---------------------------------------- lspci -vv -nn
---------------------------------------
00:00.0 Host bridge [0600]: Intel Corporation DRAM Controller
[8086:29c0] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge [0604]: Intel Corporation PCI Express Root Port
[8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f4000000-f7ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] Subsystem: Giga-byte Technology Unknown
device [1458:5000]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Address: fee0f00c Data: 4159
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2
Link: Latency L0s <256ns, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug-
Surpise-
Slot: Number 32, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [100] Virtual Channel
Capabilities: [140] Unknown (5)
00:1a.0 USB Controller [0c03]: Intel Corporation USB UHCI Controller #4
[8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e100 [size=32]
Capabilities: [50] #13 [0306]
00:1a.1 USB Controller [0c03]: Intel Corporation USB UHCI Controller #5
[8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e200 [size=32]
Capabilities: [50] #13 [0306]
00:1a.2 USB Controller [0c03]: Intel Corporation USB UHCI Controller #6
[8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e000 [size=32]
Capabilities: [50] #13 [0306]
00:1a.7 USB Controller [0c03]: Intel Corporation USB2 EHCI Controller #2
[8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fa104000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device [0403]: Intel Corporation HD Audio Controller
[8086:293e] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown,
Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)
00:1c.0 PCI bridge [0604]: Intel Corporation PCI Express Port 1
[8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 1
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 16, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Address: fee0f00c Data: 4161
Capabilities: [90] Subsystem: Giga-byte Technology Unknown
device [1458:5001]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.3 PCI bridge [0604]: Intel Corporation PCI Express Port 4
[8086:2946] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fa0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort+ <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 4
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 19, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Address: fee0f00c Data: 4169
Capabilities: [90] Subsystem: Giga-byte Technology Unknown
device [1458:5001]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.4 PCI bridge [0604]: Intel Corporation PCI Express Port 5
[8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000fa200000-00000000fa2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 5
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 20, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Address: fee0f00c Data: 4171
Capabilities: [90] Subsystem: Giga-byte Technology Unknown
device [1458:5001]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1d.0 USB Controller [0c03]: Intel Corporation USB UHCI Controller #1
[8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e300 [size=32]
Capabilities: [50] #13 [0306]
00:1d.1 USB Controller [0c03]: Intel Corporation USB UHCI Controller #2
[8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e400 [size=32]
Capabilities: [50] #13 [0306]
00:1d.2 USB Controller [0c03]: Intel Corporation USB UHCI Controller #3
[8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: [50] #13 [0306]
00:1d.7 USB Controller [0c03]: Intel Corporation USB2 EHCI Controller #1
[8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fa105000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 00009000-00009fff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Subsystem: Giga-byte Technology Unknown
device [1458:5000]
00:1f.0 ISA bridge [0601]: Intel Corporation LPC Interface Controller
[8086:2916] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 SATA controller [0106]: Intel Corporation 6 port SATA AHCI
Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Unknown device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 2299
Region 0: I/O ports at e600 [size=8]
Region 1: I/O ports at e700 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e900 [size=4]
Region 4: I/O ports at ea00 [size=32]
Region 5: Memory at fa106000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/4 Enable+
Address: fee0900c Data: 0091
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] #12 [0010]
Capabilities: [b0] #13 [0306]
00:1f.3 SMBus [0c05]: Intel Corporation SMBus Controller [8086:2930]
(rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fa107000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
01:00.0 VGA compatible controller [0300]: nVidia Corporation Unknown
device [10de:0402] (rev a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8243]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at b000 [size=128]
[virtual] Expansion ROM at f7000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag+
Device: Latency L0s <512ns, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1,
Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting
Capabilities: [600] Unknown (11)
03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Unknown device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at fa000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express Legacy Endpoint IRQ 1
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 1
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master
SecO PriO])
Subsystem: Giga-byte Technology Unknown device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c100 [size=4]
Region 2: I/O ports at c200 [size=8]
Region 3: I/O ports at c300 [size=4]
Region 4: I/O ports at c400 [size=16]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Giga-byte Technology Unknown device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f9000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fa200000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express Endpoint IRQ 0
Device: Supported: MaxPayload 1024 bytes, PhantFunc 0,
ExtTag+
Device: Latency L0s <128ns, L1 unlimited
Device: AtnBtn+ AtnInd+ PwrInd+
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [84] Vendor Specific Information
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel
Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-00-00
Capabilities: [154] Power Budgeting
------------------- sdparm -a -v /dev/sdx -----------------------
[root@localhost ~]# sdparm -a -v /dev/sda
/dev/sda: ATA WDC WD5000AAKS-2 12.0
Read write error recovery [0x1] mode page [PS=0]:
AWRE 1
ARRE 1
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
RRC 0
COR_S 0
HOC 0
DSOC 0
WRC 0
RTL 0
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
Caching (SBC) [0x8] mode page [PS=0]:
IC 0
ABPF 0
CAP 0
DISC 0
SIZE 0
WCE 1
MF 0
RCD 0
DRRP 0
WRP 0
DPTL 0
MIPF 0
MAPF 0
MAPFC 0
FSW 0
LBCSS 0
DRA 0
NV_DIS 0
NCS 0
CSS 0
Control [0xa] mode page [PS=0]:
TST 0
TMF_ONLY 0
D_SENSE 0
GLTSD 1
RLEC 0
QAM 0
QERR 0
RAC 0
UA_INTLCK 0
SWP 0
ATO 0
TAS 0
AUTOLOAD 0
BTP -1
ESTCT 30
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sdb
/dev/sdb: ATA ST3500641AS 3.AA
Read write error recovery [0x1] mode page [PS=0]:
AWRE 1
ARRE 1
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
RRC 0
COR_S 0
HOC 0
DSOC 0
WRC 0
RTL 0
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
Caching (SBC) [0x8] mode page [PS=0]:
IC 0
ABPF 0
CAP 0
DISC 0
SIZE 0
WCE 1
MF 0
RCD 0
DRRP 0
WRP 0
DPTL 0
MIPF 0
MAPF 0
MAPFC 0
FSW 0
LBCSS 0
DRA 0
NV_DIS 0
NCS 0
CSS 0
Control [0xa] mode page [PS=0]:
TST 0
TMF_ONLY 0
D_SENSE 0
GLTSD 1
RLEC 0
QAM 0
QERR 0
RAC 0
UA_INTLCK 0
SWP 0
ATO 0
TAS 0
AUTOLOAD 0
BTP -1
ESTCT 30
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sdc
/dev/sdc: ATA ST3500641AS 3.AA
Read write error recovery [0x1] mode page [PS=0]:
AWRE 1
ARRE 1
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
RRC 0
COR_S 0
HOC 0
DSOC 0
WRC 0
RTL 0
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
Caching (SBC) [0x8] mode page [PS=0]:
IC 0
ABPF 0
CAP 0
DISC 0
SIZE 0
WCE 1
MF 0
RCD 0
DRRP 0
WRP 0
DPTL 0
MIPF 0
MAPF 0
MAPFC 0
FSW 0
LBCSS 0
DRA 0
NV_DIS 0
NCS 0
CSS 0
Control [0xa] mode page [PS=0]:
TST 0
TMF_ONLY 0
D_SENSE 0
GLTSD 1
RLEC 0
QAM 0
QERR 0
RAC 0
UA_INTLCK 0
SWP 0
ATO 0
TAS 0
AUTOLOAD 0
BTP -1
ESTCT 30
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sdd
/dev/sdd: ATA ST3500641AS 3.AA
Read write error recovery [0x1] mode page [PS=0]:
AWRE 1
ARRE 1
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
RRC 0
COR_S 0
HOC 0
DSOC 0
WRC 0
RTL 0
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
Caching (SBC) [0x8] mode page [PS=0]:
IC 0
ABPF 0
CAP 0
DISC 0
SIZE 0
WCE 1
MF 0
RCD 0
DRRP 0
WRP 0
DPTL 0
MIPF 0
MAPF 0
MAPFC 0
FSW 0
LBCSS 0
DRA 0
NV_DIS 0
NCS 0
CSS 0
Control [0xa] mode page [PS=0]:
TST 0
TMF_ONLY 0
D_SENSE 0
GLTSD 1
RLEC 0
QAM 0
QERR 0
RAC 0
UA_INTLCK 0
SWP 0
ATO 0
TAS 0
AUTOLOAD 0
BTP -1
ESTCT 30
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sde
/dev/sde: ATA WDC WD5000AAKS-0 12.0
Read write error recovery [0x1] mode page [PS=0]:
AWRE 1
ARRE 1
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
RRC 0
COR_S 0
HOC 0
DSOC 0
WRC 0
RTL 0
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
Caching (SBC) [0x8] mode page [PS=0]:
IC 0
ABPF 0
CAP 0
DISC 0
SIZE 0
WCE 1
MF 0
RCD 0
DRRP 0
WRP 0
DPTL 0
MIPF 0
MAPF 0
MAPFC 0
FSW 0
LBCSS 0
DRA 0
NV_DIS 0
NCS 0
CSS 0
Control [0xa] mode page [PS=0]:
TST 0
TMF_ONLY 0
D_SENSE 0
GLTSD 1
RLEC 0
QAM 0
QERR 0
RAC 0
UA_INTLCK 0
SWP 0
ATO 0
TAS 0
AUTOLOAD 0
BTP -1
ESTCT 30
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sdf
/dev/sdf: ATA ST3500630AS 3.AA
Read write error recovery [0x1] mode page [PS=0]:
AWRE 1
ARRE 1
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
RRC 0
COR_S 0
HOC 0
DSOC 0
WRC 0
RTL 0
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
Caching (SBC) [0x8] mode page [PS=0]:
IC 0
ABPF 0
CAP 0
DISC 0
SIZE 0
WCE 1
MF 0
RCD 0
DRRP 0
WRP 0
DPTL 0
MIPF 0
MAPF 0
MAPFC 0
FSW 0
LBCSS 0
DRA 0
NV_DIS 0
NCS 0
CSS 0
Control [0xa] mode page [PS=0]:
TST 0
TMF_ONLY 0
D_SENSE 0
GLTSD 1
RLEC 0
QAM 0
QERR 0
RAC 0
UA_INTLCK 0
SWP 0
ATO 0
TAS 0
AUTOLOAD 0
BTP -1
ESTCT 30
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sdg
/dev/sdg: ATA ST3250824AS 3.AA
Read write error recovery [0x1] mode page [PS=0]:
AWRE 1
ARRE 1
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
RRC 0
COR_S 0
HOC 0
DSOC 0
WRC 0
RTL 0
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
Caching (SBC) [0x8] mode page [PS=0]:
IC 0
ABPF 0
CAP 0
DISC 0
SIZE 0
WCE 1
MF 0
RCD 0
DRRP 0
WRP 0
DPTL 0
MIPF 0
MAPF 0
MAPFC 0
FSW 0
LBCSS 0
DRA 0
NV_DIS 0
NCS 0
CSS 0
Control [0xa] mode page [PS=0]:
TST 0
TMF_ONLY 0
D_SENSE 0
GLTSD 1
RLEC 0
QAM 0
QERR 0
RAC 0
UA_INTLCK 0
SWP 0
ATO 0
TAS 0
AUTOLOAD 0
BTP -1
ESTCT 30
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sdh
/dev/sdh: ATA Maxtor 7H500F0 HA43
Read write error recovery [0x1] mode page [PS=0]:
AWRE 1
ARRE 1
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
RRC 0
COR_S 0
HOC 0
DSOC 0
WRC 0
RTL 0
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
Caching (SBC) [0x8] mode page [PS=0]:
IC 0
ABPF 0
CAP 0
DISC 0
SIZE 0
WCE 1
MF 0
RCD 0
DRRP 0
WRP 0
DPTL 0
MIPF 0
MAPF 0
MAPFC 0
FSW 0
LBCSS 0
DRA 0
NV_DIS 0
NCS 0
CSS 0
Control [0xa] mode page [PS=0]:
TST 0
TMF_ONLY 0
D_SENSE 0
GLTSD 1
RLEC 0
QAM 0
QERR 0
RAC 0
UA_INTLCK 0
SWP 0
ATO 0
TAS 0
AUTOLOAD 0
BTP -1
ESTCT 30
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sdi
/dev/sdi: SAMSUNG HD501LJ 0-10
Read write error recovery [0x1] mode page [PS=0]:
AWRE 0
ARRE 0
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
RRC 0
COR_S 0
HOC 0
DSOC 0
WRC 0
RTL 0
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
Caching (SBC) [0x8] mode page [PS=0]:
IC 0
ABPF 0
CAP 0
DISC 0
SIZE 0
WCE 0
MF 0
RCD 0
DRRP 0
WRP 0
DPTL 0
MIPF 0
MAPF 0
MAPFC 0
>> skipping rest as field position exceeds mode page length=12
>> Control mode page [0xa] not supported
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sdj
/dev/sdj: ST332082 0A 0000
Read write error recovery [0x1] mode page [PS=0]:
AWRE 0 [cha: n, def: 0, sav: 0]
ARRE 0 [cha: n, def: 0, sav: 0]
TB 0 [cha: n, def: 0, sav: 0]
RC 0 [cha: n, def: 0, sav: 0]
EER 0 [cha: n, def: 0, sav: 0]
PER 0 [cha: n, def: 0, sav: 0]
DTE 0 [cha: n, def: 0, sav: 0]
DCR 0 [cha: n, def: 0, sav: 0]
RRC 0 [cha: n, def: 0, sav: 0]
COR_S 0 [cha: n, def: 0, sav: 0]
HOC 0 [cha: n, def: 0, sav: 0]
DSOC 0 [cha: n, def: 0, sav: 0]
WRC 0 [cha: n, def: 0, sav: 0]
RTL 0 [cha: n, def: 0, sav: 0]
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
>> Caching (SBC) mode page [0x8] failed
>> Control mode page [0xa] not supported
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
[root@localhost ~]# sdparm -a -v /dev/sdk
/dev/sdk: ST320082 2A 3.01
>> Read write error recovery mode page [0x1] not supported
>> Disconnect-reconnect (SPC + transports) mode page [0x2] not supported
>> Format (SBC) mode page [0x3] not supported
>> Rigid disk (SBC) mode page [0x4] not supported
>> Verify error recovery (SBC) mode page [0x7] not supported
>> Caching (SBC) mode page [0x8] not supported
>> Control mode page [0xa] not supported
>> Control extension mode subpage [0xa,0x1] not supported
>> SAT pATA control mode subpage [0xa,0xf1] not supported
>> Power condition - old version mode page [0xd] not supported
>> XOR control (SBC) mode page [0x10] not supported
>> Protocol specific logical unit mode page [0x18] not supported
>> Protocol specific port mode page [0x19] not supported
>> Power condition mode page [0x1a] not supported
>> Informational exceptions control mode page [0x1c] not supported
>> Background control (SBC) mode subpage [0x1c,0x1] not supported
------------------- RAID setup on drives ------------------
[root@localhost ~]# mdadm --detail /dev/md0
/dev/md0:
Version : 00.90.03
Creation Time : Thu Sep 6 21:51:17 2007
Raid Level : raid5
Array Size : 2930303616 (2794.56 GiB 3000.63 GB)
Used Dev Size : 488383936 (465.76 GiB 500.11 GB)
Raid Devices : 7
Total Devices : 7
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Fri Sep 7 12:20:12 2007
State : clean
Active Devices : 7
Working Devices : 7
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 64K
UUID : 240004cd:0f00f1b9:ff34037b:d58aa0b2
Events : 0.18
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 8 17 1 active sync /dev/sdb1
2 8 33 2 active sync /dev/sdc1
3 8 49 3 active sync /dev/sdd1
4 8 65 4 active sync /dev/sde1
5 8 81 5 active sync /dev/sdf1
6 8 113 6 active sync /dev/sdh1
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2007-09-15 7:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-15 7:57 Andrew Morton [this message]
2007-09-15 23:57 ` Fw: Spurious completions during NCQ Jeff Garzik
2007-09-16 12:47 ` Tejun Heo
2007-09-17 13:18 ` Sumanth J.V
-- strict thread matches above, loose matches on Subject: below --
2007-10-19 23:46 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070915005751.353d0c69.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=sumanth@cse.unl.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.