From: "Sumanth J.V" <sumanth@cse.unl.edu>
To: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>,
Andrew Morton <akpm@linux-foundation.org>,
linux-ide@vger.kernel.org
Subject: Re: Fw: Spurious completions during NCQ
Date: Mon, 17 Sep 2007 08:18:26 -0500 [thread overview]
Message-ID: <46EE7EA2.3000608@cse.unl.edu> (raw)
In-Reply-To: <46ED25DD.605@gmail.com>
Tejun Heo wrote:
> Jeff Garzik wrote:
>
>> Andrew Morton wrote:
>>
>>> Begin forwarded message:
>>>
>>> Date: Fri, 07 Sep 2007 12:57:14 -0500
>>> From: "Sumanth J.V" <sumanth@cse.unl.edu>
>>> To: linux-kernel@vger.kernel.org
>>> Subject: Spurious completions during NCQ
>>>
>>>
>>> I keep seeing this message a few times a day on my box.
>>>
>>> ata1.00: exception Emask 0x2 SAct 0x18 SErr 0x0 action 0x2 frozen
>>> ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x18
>>> FIS=004040a1:00000004)
>>>
>
> Please report the result of "hdparm -I /dev/sda".
>
>
[root@localhost 3d]# hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD5000AAKS-22TMA0
Serial Number: WD-WCAPW2873034
Firmware Revision: 12.01C01
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific
minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12]
unknown 206[13]
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
128min for SECURITY ERASE UNIT.
Checksum: correct
next prev parent reply other threads:[~2007-09-17 13:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-15 7:57 Fw: Spurious completions during NCQ Andrew Morton
2007-09-15 23:57 ` Jeff Garzik
2007-09-16 12:47 ` Tejun Heo
2007-09-17 13:18 ` Sumanth J.V [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-10-19 23:46 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46EE7EA2.3000608@cse.unl.edu \
--to=sumanth@cse.unl.edu \
--cc=akpm@linux-foundation.org \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.