* [PARTIAL PATCH] snd-hda-intel on Medion WIM2160
@ 2007-09-11 12:16 Bernhard Rosenkraenzer
2007-09-13 12:47 ` [alsa-devel] " Takashi Iwai
0 siblings, 1 reply; 7+ messages in thread
From: Bernhard Rosenkraenzer @ 2007-09-11 12:16 UTC (permalink / raw)
To: alsa-devel; +Cc: linux-kernel
Hi,
On Medion WIM2160 notebooks (soundchip PCI ID 8086:27d8/17c0:4071),
snd-hda-intel loads and everything acts like it's working, but there's no
sound. The master volume is muted and there's no way to unmute it.
The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI
(and subvendor/subdevice) ID -- so the patch quite likely breaks Medion MD2
support.
WIM2160's soundchip has revision ID 02 - if MD2 uses something else, maybe
that can be used to identify them and do the right thing. (I don't have an
MD2...).
ttyl
bero
--- linux-2.6.22/sound/pci/hda/patch_realtek.c.wim2160snd~ 2007-07-09
01:32:17.000000000 +0200
+++ linux-2.6.22/sound/pci/hda/patch_realtek.c 2007-09-09 20:28:55.000000000
+0200
@@ -159,6 +159,7 @@
ALC883_ACER,
ALC883_MEDION,
ALC883_MEDION_MD2,
+ ALC883_MEDION_WIM2160,
ALC883_LAPTOP_EAPD,
ALC883_LENOVO_101E_2ch,
ALC883_LENOVO_NB0763,
@@ -5995,6 +5996,32 @@
{ } /* end */
};
+static struct snd_kcontrol_new alc883_medion_wim2160_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("iMic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("iMic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc883_mux_enum_info,
+ .get = alc883_mux_enum_get,
+ .put = alc883_mux_enum_put,
+ },
+ { } /* end */
+};
+
static struct snd_kcontrol_new alc883_chmode_mixer[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -6364,6 +6391,7 @@
[ALC883_ACER] = "acer",
[ALC883_MEDION] = "medion",
[ALC883_MEDION_MD2] = "medion-md2",
+ [ALC883_MEDION_WIM2160] = "medion-wim2160",
[ALC883_LAPTOP_EAPD] = "laptop-eapd",
[ALC883_LENOVO_101E_2ch] = "lenovo-101e",
[ALC883_LENOVO_NB0763] = "lenovo-nb0763",
@@ -6401,6 +6429,7 @@
SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763),
- SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
+ //SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
+ SND_PCI_QUIRK(0x17c0, 0x4071, "Medion WIM2160", ALC883_MEDION_WIM2160),
{}
};
@@ -6530,6 +6559,19 @@
.unsol_event = alc883_medion_md2_unsol_event,
.init_hook = alc883_medion_md2_automute,
},
+ [ALC883_MEDION_WIM2160] = {
+ .mixers = { alc883_medion_wim2160_mixer },
+ .init_verbs = { alc883_init_verbs, alc883_lenovo_nb0763_verbs},
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .adc_nids = alc883_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+ .channel_mode = alc883_3ST_2ch_modes,
+ .input_mux = &alc883_lenovo_nb0763_capture_source,
+ .unsol_event = alc883_medion_md2_unsol_event,
+ .init_hook = alc883_medion_md2_automute,
+ },
[ALC883_LAPTOP_EAPD] = {
.mixers = { alc883_base_mixer,
alc883_chmode_mixer },
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PARTIAL PATCH] snd-hda-intel on Medion WIM2160 2007-09-11 12:16 [PARTIAL PATCH] snd-hda-intel on Medion WIM2160 Bernhard Rosenkraenzer @ 2007-09-13 12:47 ` Takashi Iwai 0 siblings, 0 replies; 7+ messages in thread From: Takashi Iwai @ 2007-09-13 12:47 UTC (permalink / raw) To: Bernhard Rosenkraenzer; +Cc: alsa-devel, linux-kernel At Tue, 11 Sep 2007 14:16:24 +0200, Bernhard Rosenkraenzer wrote: > > Hi, > On Medion WIM2160 notebooks (soundchip PCI ID 8086:27d8/17c0:4071), > snd-hda-intel loads and everything acts like it's working, but there's no > sound. The master volume is muted and there's no way to unmute it. > > The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI > (and subvendor/subdevice) ID -- so the patch quite likely breaks Medion MD2 > support. In that case, try to reset board_config after snd_hda_check_board_config() but before setup_preset(). See patch_alc885() for example (appeariny in the latest ALSA tree, also in mm tree). Otherwise it looks OK to me. But, what is the primary difference in the setup between MD2 and WIM2160? Thanks, Takashi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [alsa-devel] [PARTIAL PATCH] snd-hda-intel on Medion WIM2160 @ 2007-09-13 12:47 ` Takashi Iwai 0 siblings, 0 replies; 7+ messages in thread From: Takashi Iwai @ 2007-09-13 12:47 UTC (permalink / raw) To: Bernhard Rosenkraenzer; +Cc: alsa-devel, linux-kernel At Tue, 11 Sep 2007 14:16:24 +0200, Bernhard Rosenkraenzer wrote: > > Hi, > On Medion WIM2160 notebooks (soundchip PCI ID 8086:27d8/17c0:4071), > snd-hda-intel loads and everything acts like it's working, but there's no > sound. The master volume is muted and there's no way to unmute it. > > The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI > (and subvendor/subdevice) ID -- so the patch quite likely breaks Medion MD2 > support. In that case, try to reset board_config after snd_hda_check_board_config() but before setup_preset(). See patch_alc885() for example (appeariny in the latest ALSA tree, also in mm tree). Otherwise it looks OK to me. But, what is the primary difference in the setup between MD2 and WIM2160? Thanks, Takashi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PARTIAL PATCH] snd-hda-intel on Medion WIM2160 2007-09-13 12:47 ` [alsa-devel] " Takashi Iwai @ 2007-09-19 18:26 ` Bernhard Rosenkraenzer -1 siblings, 0 replies; 7+ messages in thread From: Bernhard Rosenkraenzer @ 2007-09-19 18:26 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, linux-kernel [-- Attachment #1: Type: text/plain, Size: 1105 bytes --] On Thursday 13 September 2007, Takashi Iwai wrote: > > The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI > > (and subvendor/subdevice) ID -- so the patch quite likely breaks Medion > > MD2 support. > > In that case, try to reset board_config after > snd_hda_check_board_config() but before setup_preset(). See > patch_alc885() for example (appeariny in the latest ALSA tree, also in > mm tree). Will do... > Otherwise it looks OK to me. But, what is the primary difference in > the setup between MD2 and WIM2160? I don't know -- I made it work by trial and error (I don't have access to any hardware specs or the likes). By some more trial and error, I could minimize the patch some more - it's down to editing the init_verbs and mixers. In the mixers, this one seems to be the key: HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT) Maybe we can get it to work with both MD2 and WIM2160 by using the MD2 mixers with this one added. I'm not familiar enough with sound drivers in general to fiddle with the verbs and be reasonably sure I'm not breaking the MD2. [-- Attachment #2: medion-wim2160-sound-try2.patch --] [-- Type: text/x-diff, Size: 3146 bytes --] --- linux-2.6.22/sound/pci/hda/patch_realtek.c.wim2160snd~ 2007-09-14 15:51:28.000000000 +0200 +++ linux-2.6.22/sound/pci/hda/patch_realtek.c 2007-09-14 15:53:21.000000000 +0200 @@ -169,6 +169,7 @@ ALC883_ACER, ALC883_MEDION, ALC883_MEDION_MD2, + ALC883_MEDION_WIM2160, ALC883_LAPTOP_EAPD, ALC883_LENOVO_101E_2ch, ALC883_LENOVO_NB0763, @@ -6235,6 +6236,32 @@ { } /* end */ }; +static struct snd_kcontrol_new alc883_medion_wim2160_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("iMic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("iMic Playback Switch", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + /* .name = "Capture Source", */ + .name = "Input Source", + .count = 2, + .info = alc883_mux_enum_info, + .get = alc883_mux_enum_get, + .put = alc883_mux_enum_put, + }, + { } /* end */ +}; + static struct snd_kcontrol_new alc883_chmode_mixer[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -6640,6 +6667,7 @@ [ALC883_ACER] = "acer", [ALC883_MEDION] = "medion", [ALC883_MEDION_MD2] = "medion-md2", + [ALC883_MEDION_WIM2160] = "medion-wim2160", [ALC883_LAPTOP_EAPD] = "laptop-eapd", [ALC883_LENOVO_101E_2ch] = "lenovo-101e", [ALC883_LENOVO_NB0763] = "lenovo-nb0763", @@ -6684,7 +6712,8 @@ SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC888_6ST_HP), SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP), SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP), - SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2), + //SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2), + SND_PCI_QUIRK(0x17c0, 0x4071, "Medion WIM2160", ALC883_MEDION_WIM2160), {} }; @@ -6814,6 +6843,20 @@ .unsol_event = alc883_medion_md2_unsol_event, .init_hook = alc883_medion_md2_automute, }, + [ALC883_MEDION_WIM2160] = { + .mixers = { alc883_medion_wim2160_mixer }, + .init_verbs = { alc883_init_verbs, alc883_lenovo_nb0763_verbs}, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), + .adc_nids = alc883_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), + .channel_mode = alc883_3ST_2ch_modes, + .input_mux = &alc883_capture_source, + .unsol_event = alc883_medion_md2_unsol_event, + .init_hook = alc883_medion_md2_automute, + }, [ALC883_LAPTOP_EAPD] = { .mixers = { alc883_base_mixer, alc883_chmode_mixer }, [-- Attachment #3: Type: text/plain, Size: 160 bytes --] _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [alsa-devel] [PARTIAL PATCH] snd-hda-intel on Medion WIM2160 @ 2007-09-19 18:26 ` Bernhard Rosenkraenzer 0 siblings, 0 replies; 7+ messages in thread From: Bernhard Rosenkraenzer @ 2007-09-19 18:26 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, linux-kernel [-- Attachment #1: Type: text/plain, Size: 1105 bytes --] On Thursday 13 September 2007, Takashi Iwai wrote: > > The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI > > (and subvendor/subdevice) ID -- so the patch quite likely breaks Medion > > MD2 support. > > In that case, try to reset board_config after > snd_hda_check_board_config() but before setup_preset(). See > patch_alc885() for example (appeariny in the latest ALSA tree, also in > mm tree). Will do... > Otherwise it looks OK to me. But, what is the primary difference in > the setup between MD2 and WIM2160? I don't know -- I made it work by trial and error (I don't have access to any hardware specs or the likes). By some more trial and error, I could minimize the patch some more - it's down to editing the init_verbs and mixers. In the mixers, this one seems to be the key: HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT) Maybe we can get it to work with both MD2 and WIM2160 by using the MD2 mixers with this one added. I'm not familiar enough with sound drivers in general to fiddle with the verbs and be reasonably sure I'm not breaking the MD2. [-- Attachment #2: medion-wim2160-sound-try2.patch --] [-- Type: text/x-diff, Size: 3146 bytes --] --- linux-2.6.22/sound/pci/hda/patch_realtek.c.wim2160snd~ 2007-09-14 15:51:28.000000000 +0200 +++ linux-2.6.22/sound/pci/hda/patch_realtek.c 2007-09-14 15:53:21.000000000 +0200 @@ -169,6 +169,7 @@ ALC883_ACER, ALC883_MEDION, ALC883_MEDION_MD2, + ALC883_MEDION_WIM2160, ALC883_LAPTOP_EAPD, ALC883_LENOVO_101E_2ch, ALC883_LENOVO_NB0763, @@ -6235,6 +6236,32 @@ { } /* end */ }; +static struct snd_kcontrol_new alc883_medion_wim2160_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("iMic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("iMic Playback Switch", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + /* .name = "Capture Source", */ + .name = "Input Source", + .count = 2, + .info = alc883_mux_enum_info, + .get = alc883_mux_enum_get, + .put = alc883_mux_enum_put, + }, + { } /* end */ +}; + static struct snd_kcontrol_new alc883_chmode_mixer[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -6640,6 +6667,7 @@ [ALC883_ACER] = "acer", [ALC883_MEDION] = "medion", [ALC883_MEDION_MD2] = "medion-md2", + [ALC883_MEDION_WIM2160] = "medion-wim2160", [ALC883_LAPTOP_EAPD] = "laptop-eapd", [ALC883_LENOVO_101E_2ch] = "lenovo-101e", [ALC883_LENOVO_NB0763] = "lenovo-nb0763", @@ -6684,7 +6712,8 @@ SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC888_6ST_HP), SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP), SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP), - SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2), + //SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2), + SND_PCI_QUIRK(0x17c0, 0x4071, "Medion WIM2160", ALC883_MEDION_WIM2160), {} }; @@ -6814,6 +6843,20 @@ .unsol_event = alc883_medion_md2_unsol_event, .init_hook = alc883_medion_md2_automute, }, + [ALC883_MEDION_WIM2160] = { + .mixers = { alc883_medion_wim2160_mixer }, + .init_verbs = { alc883_init_verbs, alc883_lenovo_nb0763_verbs}, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), + .adc_nids = alc883_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), + .channel_mode = alc883_3ST_2ch_modes, + .input_mux = &alc883_capture_source, + .unsol_event = alc883_medion_md2_unsol_event, + .init_hook = alc883_medion_md2_automute, + }, [ALC883_LAPTOP_EAPD] = { .mixers = { alc883_base_mixer, alc883_chmode_mixer }, ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PARTIAL PATCH] snd-hda-intel on Medion WIM2160 2007-09-19 18:26 ` [alsa-devel] " Bernhard Rosenkraenzer @ 2007-09-20 11:05 ` Takashi Iwai -1 siblings, 0 replies; 7+ messages in thread From: Takashi Iwai @ 2007-09-20 11:05 UTC (permalink / raw) To: Bernhard Rosenkraenzer; +Cc: alsa-devel, linux-kernel At Wed, 19 Sep 2007 20:26:27 +0200, Bernhard Rosenkraenzer wrote: > > On Thursday 13 September 2007, Takashi Iwai wrote: > > > The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI > > > (and subvendor/subdevice) ID -- so the patch quite likely breaks Medion > > > MD2 support. > > > > In that case, try to reset board_config after > > snd_hda_check_board_config() but before setup_preset(). See > > patch_alc885() for example (appeariny in the latest ALSA tree, also in > > mm tree). > > Will do... > > > Otherwise it looks OK to me. But, what is the primary difference in > > the setup between MD2 and WIM2160? > > I don't know -- I made it work by trial and error (I don't have access to any > hardware specs or the likes). By some more trial and error, I could minimize > the patch some more - it's down to editing the init_verbs and mixers. > In the mixers, this one seems to be the key: > HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT) Hmm, these should be constantly unmuted at initialization via alc883_medion_md2_verbs[] in MD2 model, too. Could you double-check whether MD2 model doesn't work? If really not works, check codec#* output whether the inputs of NID 0x0c get unmuted or not. Takashi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [alsa-devel] [PARTIAL PATCH] snd-hda-intel on Medion WIM2160 @ 2007-09-20 11:05 ` Takashi Iwai 0 siblings, 0 replies; 7+ messages in thread From: Takashi Iwai @ 2007-09-20 11:05 UTC (permalink / raw) To: Bernhard Rosenkraenzer; +Cc: alsa-devel, linux-kernel At Wed, 19 Sep 2007 20:26:27 +0200, Bernhard Rosenkraenzer wrote: > > On Thursday 13 September 2007, Takashi Iwai wrote: > > > The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI > > > (and subvendor/subdevice) ID -- so the patch quite likely breaks Medion > > > MD2 support. > > > > In that case, try to reset board_config after > > snd_hda_check_board_config() but before setup_preset(). See > > patch_alc885() for example (appeariny in the latest ALSA tree, also in > > mm tree). > > Will do... > > > Otherwise it looks OK to me. But, what is the primary difference in > > the setup between MD2 and WIM2160? > > I don't know -- I made it work by trial and error (I don't have access to any > hardware specs or the likes). By some more trial and error, I could minimize > the patch some more - it's down to editing the init_verbs and mixers. > In the mixers, this one seems to be the key: > HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT) Hmm, these should be constantly unmuted at initialization via alc883_medion_md2_verbs[] in MD2 model, too. Could you double-check whether MD2 model doesn't work? If really not works, check codec#* output whether the inputs of NID 0x0c get unmuted or not. Takashi ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2007-09-20 11:05 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2007-09-11 12:16 [PARTIAL PATCH] snd-hda-intel on Medion WIM2160 Bernhard Rosenkraenzer 2007-09-13 12:47 ` Takashi Iwai 2007-09-13 12:47 ` [alsa-devel] " Takashi Iwai 2007-09-19 18:26 ` Bernhard Rosenkraenzer 2007-09-19 18:26 ` [alsa-devel] " Bernhard Rosenkraenzer 2007-09-20 11:05 ` Takashi Iwai 2007-09-20 11:05 ` [alsa-devel] " Takashi Iwai
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.