From: Bernhard Walle <bwalle@suse.de>
To: kexec@lists.infradead.org, akpm@linux-foundation.org
Cc: linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [patch 2/7] Use extended crashkernel command line on i386
Date: Thu, 20 Sep 2007 19:18:47 +0200 [thread overview]
Message-ID: <20070920171846.278376000@stravinsky.suse.de> (raw)
In-Reply-To: 20070920171845.774383000@stravinsky.suse.de
[-- Attachment #1: crashkernel-i386 --]
[-- Type: text/plain, Size: 3482 bytes --]
This patch removes the crashkernel parsing from
arch/i386/kernel/machine_kexec.c and calls the generic function, introduced in
the last patch, in setup_bootmem_allocator().
This is necessary because the amount of System RAM must be known in this
function now because of the new syntax.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
---
arch/i386/kernel/e820.c | 3 ++-
arch/i386/kernel/machine_kexec.c | 22 ----------------------
arch/i386/kernel/setup.c | 37 ++++++++++++++++++++++++++++++++-----
3 files changed, 34 insertions(+), 28 deletions(-)
--- a/arch/i386/kernel/e820.c
+++ b/arch/i386/kernel/e820.c
@@ -288,7 +288,8 @@ legacy_init_iomem_resources(struct resou
request_resource(res, code_resource);
request_resource(res, data_resource);
#ifdef CONFIG_KEXEC
- request_resource(res, &crashk_res);
+ if (crashk_res.start != crashk_res.end)
+ request_resource(res, &crashk_res);
#endif
}
}
--- a/arch/i386/kernel/machine_kexec.c
+++ b/arch/i386/kernel/machine_kexec.c
@@ -149,28 +149,6 @@ NORET_TYPE void machine_kexec(struct kim
image->start, cpu_has_pae);
}
-/* crashkernel=size@addr specifies the location to reserve for
- * a crash kernel. By reserving this memory we guarantee
- * that linux never sets it up as a DMA target.
- * Useful for holding code to do something appropriate
- * after a kernel panic.
- */
-static int __init parse_crashkernel(char *arg)
-{
- unsigned long size, base;
- size = memparse(arg, &arg);
- if (*arg == '@') {
- base = memparse(arg+1, &arg);
- /* FIXME: Do I want a sanity check
- * to validate the memory range?
- */
- crashk_res.start = base;
- crashk_res.end = base + size - 1;
- }
- return 0;
-}
-early_param("crashkernel", parse_crashkernel);
-
void arch_crash_save_vmcoreinfo(void)
{
#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -381,6 +381,37 @@ extern unsigned long __init setup_memory
extern void zone_sizes_init(void);
#endif /* !CONFIG_NEED_MULTIPLE_NODES */
+#ifdef CONFIG_KEXEC
+static void __init reserve_crashkernel(void)
+{
+ unsigned long long free_mem;
+ unsigned long long crash_size, crash_base;
+ int ret;
+
+ free_mem = (max_low_pfn + highend_pfn - highstart_pfn) << PAGE_SHIFT;
+
+ ret = parse_crashkernel(boot_command_line, free_mem,
+ &crash_size, &crash_base);
+ if (ret == 0 && crash_size > 0) {
+ if (crash_base > 0) {
+ printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+ "for crashkernel (System RAM: %ldMB)\n",
+ (unsigned long)(crash_size >> 20),
+ (unsigned long)(crash_base >> 20),
+ (unsigned long)(free_mem >> 20));
+ crashk_res.start = crash_base;
+ crashk_res.end = crash_base + crash_size - 1;
+ reserve_bootmem(crash_base, crash_size);
+ } else
+ printk(KERN_INFO "crashkernel reservation failed - "
+ "you have to specify a base address\n");
+ }
+}
+#else
+static inline void __init reserve_crashkernel(void)
+{}
+#endif
+
void __init setup_bootmem_allocator(void)
{
unsigned long bootmap_size;
@@ -456,11 +487,7 @@ void __init setup_bootmem_allocator(void
}
}
#endif
-#ifdef CONFIG_KEXEC
- if (crashk_res.start != crashk_res.end)
- reserve_bootmem(crashk_res.start,
- crashk_res.end - crashk_res.start + 1);
-#endif
+ reserve_crashkernel();
}
/*
--
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
WARNING: multiple messages have this Message-ID (diff)
From: Bernhard Walle <bwalle@suse.de>
To: kexec@lists.infradead.org, akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Subject: [patch 2/7] Use extended crashkernel command line on i386
Date: Thu, 20 Sep 2007 19:18:47 +0200 [thread overview]
Message-ID: <20070920171846.278376000@stravinsky.suse.de> (raw)
In-Reply-To: 20070920171845.774383000@stravinsky.suse.de
[-- Attachment #1: crashkernel-i386 --]
[-- Type: text/plain, Size: 3338 bytes --]
This patch removes the crashkernel parsing from
arch/i386/kernel/machine_kexec.c and calls the generic function, introduced in
the last patch, in setup_bootmem_allocator().
This is necessary because the amount of System RAM must be known in this
function now because of the new syntax.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
---
arch/i386/kernel/e820.c | 3 ++-
arch/i386/kernel/machine_kexec.c | 22 ----------------------
arch/i386/kernel/setup.c | 37 ++++++++++++++++++++++++++++++++-----
3 files changed, 34 insertions(+), 28 deletions(-)
--- a/arch/i386/kernel/e820.c
+++ b/arch/i386/kernel/e820.c
@@ -288,7 +288,8 @@ legacy_init_iomem_resources(struct resou
request_resource(res, code_resource);
request_resource(res, data_resource);
#ifdef CONFIG_KEXEC
- request_resource(res, &crashk_res);
+ if (crashk_res.start != crashk_res.end)
+ request_resource(res, &crashk_res);
#endif
}
}
--- a/arch/i386/kernel/machine_kexec.c
+++ b/arch/i386/kernel/machine_kexec.c
@@ -149,28 +149,6 @@ NORET_TYPE void machine_kexec(struct kim
image->start, cpu_has_pae);
}
-/* crashkernel=size@addr specifies the location to reserve for
- * a crash kernel. By reserving this memory we guarantee
- * that linux never sets it up as a DMA target.
- * Useful for holding code to do something appropriate
- * after a kernel panic.
- */
-static int __init parse_crashkernel(char *arg)
-{
- unsigned long size, base;
- size = memparse(arg, &arg);
- if (*arg == '@') {
- base = memparse(arg+1, &arg);
- /* FIXME: Do I want a sanity check
- * to validate the memory range?
- */
- crashk_res.start = base;
- crashk_res.end = base + size - 1;
- }
- return 0;
-}
-early_param("crashkernel", parse_crashkernel);
-
void arch_crash_save_vmcoreinfo(void)
{
#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -381,6 +381,37 @@ extern unsigned long __init setup_memory
extern void zone_sizes_init(void);
#endif /* !CONFIG_NEED_MULTIPLE_NODES */
+#ifdef CONFIG_KEXEC
+static void __init reserve_crashkernel(void)
+{
+ unsigned long long free_mem;
+ unsigned long long crash_size, crash_base;
+ int ret;
+
+ free_mem = (max_low_pfn + highend_pfn - highstart_pfn) << PAGE_SHIFT;
+
+ ret = parse_crashkernel(boot_command_line, free_mem,
+ &crash_size, &crash_base);
+ if (ret == 0 && crash_size > 0) {
+ if (crash_base > 0) {
+ printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+ "for crashkernel (System RAM: %ldMB)\n",
+ (unsigned long)(crash_size >> 20),
+ (unsigned long)(crash_base >> 20),
+ (unsigned long)(free_mem >> 20));
+ crashk_res.start = crash_base;
+ crashk_res.end = crash_base + crash_size - 1;
+ reserve_bootmem(crash_base, crash_size);
+ } else
+ printk(KERN_INFO "crashkernel reservation failed - "
+ "you have to specify a base address\n");
+ }
+}
+#else
+static inline void __init reserve_crashkernel(void)
+{}
+#endif
+
void __init setup_bootmem_allocator(void)
{
unsigned long bootmap_size;
@@ -456,11 +487,7 @@ void __init setup_bootmem_allocator(void
}
}
#endif
-#ifdef CONFIG_KEXEC
- if (crashk_res.start != crashk_res.end)
- reserve_bootmem(crashk_res.start,
- crashk_res.end - crashk_res.start + 1);
-#endif
+ reserve_crashkernel();
}
/*
--
next prev parent reply other threads:[~2007-09-20 17:19 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-20 17:18 [patch 0/7] Add extended crashkernel command line syntax Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle
2007-09-20 17:18 ` [patch 1/7] Extended crashkernel command line Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle
2007-09-22 23:14 ` Oleg Verych
2007-09-22 23:14 ` Oleg Verych
2007-09-23 20:19 ` Bernhard Walle
2007-09-23 20:19 ` Bernhard Walle
2007-09-23 21:15 ` Oleg Verych
2007-09-23 21:15 ` Oleg Verych
2007-09-23 21:04 ` Bernhard Walle
2007-09-23 21:04 ` Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle [this message]
2007-09-20 17:18 ` [patch 2/7] Use extended crashkernel command line on i386 Bernhard Walle
2007-09-20 17:18 ` [patch 3/7] Use extended crashkernel command line on x86_64 Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle
2007-09-20 17:18 ` [patch 4/7] Use extended crashkernel command line on ia64 Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle
2007-09-20 17:18 ` [patch 5/7] Use extended crashkernel command line on ppc64 Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle
2007-09-20 17:18 ` [patch 6/7] Use extended crashkernel command line on sh Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle
2007-09-20 17:18 ` [patch 7/7] Add documentation for extended crashkernel syntax Bernhard Walle
2007-09-20 17:18 ` Bernhard Walle
-- strict thread matches above, loose matches on Subject: below --
2007-09-25 18:22 [patch 0/7] Add extended crashkernel command line syntax Bernhard Walle
2007-09-25 18:22 ` [patch 2/7] Use extended crashkernel command line on i386 Bernhard Walle
2007-09-25 18:22 ` Bernhard Walle
2007-09-13 16:14 [patch 0/7] Add extended crashkernel command line syntax Bernhard Walle
2007-09-13 16:14 ` [patch 2/7] Use extended crashkernel command line on i386 Bernhard Walle
2007-09-13 16:14 ` Bernhard Walle
2007-09-18 4:36 ` Vivek Goyal
2007-09-18 4:36 ` Vivek Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070920171846.278376000@stravinsky.suse.de \
--to=bwalle@suse.de \
--cc=akpm@linux-foundation.org \
--cc=kexec@lists.infradead.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.