From: Marc MERLIN <marc@merlins.org>
To: htejun@gmail.com, linux-ide@vger.kernel.org
Subject: Re: sil24 PMP works with ST3500641AS but not HDS721010KLA330
Date: Tue, 2 Oct 2007 19:28:57 -0700 [thread overview]
Message-ID: <20071003022857.GA19430@merlins.org> (raw)
In-Reply-To: <20071002170445.GB2902@merlins.org>
On Tue, Oct 02, 2007 at 10:04:45AM -0700, Marc MERLIN wrote:
> Howdy,
>
> I've had a system with 2.6.22.1 for a while, running 10 drives
> behind a PMP on a sil24 card with no problems.
>
> Recently, I swapped 5 250GB drives with 5 TB drives.
> The 5 TB drives eventually get detected, but do not work reliably.
>
> Details are below.
>
> This is all on 2.6.22.1-libata-tj-20070803.
> I noticed that 20070808 is out, but it says it fixed NCQ over PMP,
> and NCQ was working fine with my 500GB drives, so I'm not sure it's that.
I tried with 20070808. Boot was better, so it seems to have helped.
I guess the NCQ fix was relevant for my TB drives but not needed for the 500GB ones.
I still got this when the array was built, but it didn't seem to prevent it from
being built and from working:
ata3.04: exception Emask 0x0 SAct 0xff SErr 0x0 action 0x2 frozen
ata3.04: cmd 61/c0:00:7f:94:04/00:00:71:00:00/40 tag 0 cdb 0x0 data 98304 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/00:08:3f:95:04/01:00:71:00:00/40 tag 1 cdb 0x0 data 131072 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/08:10:77:94:04/00:00:71:00:00/40 tag 2 cdb 0x0 data 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/90:18:3f:96:04/00:00:71:00:00/40 tag 3 cdb 0x0 data 73728 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/20:20:57:93:04/01:00:71:00:00/40 tag 4 cdb 0x0 data 147456 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/70:28:cf:96:04/00:00:71:00:00/40 tag 5 cdb 0x0 data 57344 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/00:30:3f:97:04/01:00:71:00:00/40 tag 6 cdb 0x0 data 131072 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/20:38:3f:98:04/01:00:71:00:00/40 tag 7 cdb 0x0 data 147456 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.15: hard resetting link
ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata3.00: hard resetting link
ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: hard resetting link
ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.02: hard resetting link
ata3.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.03: hard resetting link
ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.04: hard resetting link
ata3.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.05: hard resetting link
ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3.01: configured for UDMA/100
ata3.02: configured for UDMA/100
ata3.03: configured for UDMA/100
ata3.04: configured for UDMA/100
ata3: EH complete
sd 3:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:1:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:1:0:0: [sdd] Write Protect is off
sd 3:1:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:1:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:2:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:2:0:0: [sde] Write Protect is off
sd 3:2:0:0: [sde] Mode Sense: 00 3a 00 00
sd 3:2:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:3:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:3:0:0: [sdf] Write Protect is off
sd 3:3:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 3:3:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:4:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:4:0:0: [sdg] Write Protect is off
sd 3:4:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 3:4:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:1:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:1:0:0: [sdd] Write Protect is off
sd 3:1:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:1:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:2:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:2:0:0: [sde] Write Protect is off
sd 3:2:0:0: [sde] Mode Sense: 00 3a 00 00
sd 3:2:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:3:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:3:0:0: [sdf] Write Protect is off
sd 3:3:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 3:3:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:4:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:4:0:0: [sdg] Write Protect is off
sd 3:4:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 3:4:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems & security ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
next prev parent reply other threads:[~2007-10-03 2:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-02 17:04 sil24 PMP works with ST3500641AS but not HDS721010KLA330 Marc MERLIN
2007-10-02 17:15 ` Marc MERLIN
2007-10-03 2:28 ` Marc MERLIN [this message]
2007-10-03 2:32 ` Marc MERLIN
2007-10-03 3:30 ` Tejun Heo
2007-10-03 5:59 ` Marc MERLIN
2007-10-03 6:38 ` Marc MERLIN
2007-10-03 14:08 ` Marc MERLIN
2007-10-07 17:22 ` sil24 PMP works with ST3500641AS but not HDS721010KLA330 (mostly solved) Marc MERLIN
2007-10-08 1:06 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071003022857.GA19430@merlins.org \
--to=marc@merlins.org \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.