From: Marc MERLIN <marc@merlins.org>
To: htejun@gmail.com, linux-ide@vger.kernel.org
Subject: Re: sil24 PMP works with ST3500641AS but not HDS721010KLA330
Date: Tue, 2 Oct 2007 19:32:13 -0700 [thread overview]
Message-ID: <20071003023213.GB19430@merlins.org> (raw)
In-Reply-To: <20071003022857.GA19430@merlins.org>
On Tue, Oct 02, 2007 at 07:28:57PM -0700, Marc MERLIN wrote:
> On Tue, Oct 02, 2007 at 10:04:45AM -0700, Marc MERLIN wrote:
> > Howdy,
> >
> > I've had a system with 2.6.22.1 for a while, running 10 drives
> > behind a PMP on a sil24 card with no problems.
> >
> > Recently, I swapped 5 250GB drives with 5 TB drives.
> > The 5 TB drives eventually get detected, but do not work reliably.
> >
> > Details are below.
> >
> > This is all on 2.6.22.1-libata-tj-20070803.
> > I noticed that 20070808 is out, but it says it fixed NCQ over PMP,
> > and NCQ was working fine with my 500GB drives, so I'm not sure it's that.
>
> I tried with 20070808. Boot was better, so it seems to have helped.
> I guess the NCQ fix was relevant for my TB drives but not needed for the 500GB ones.
>
> I still got this when the array was built, but it didn't seem to prevent it from
> being built and from working:
Grr, never mind. Right as I sent this, the array died when I mke2fs'ed it.
Any other suggestions?
ata3.00: exception Emask 0x100 SAct 0x610 SErr 0x0 action 0x6 frozen
ata3.00: cmd 60/18:20:4f:00:48/00:00:02:00:00/40 tag 4 cdb 0x0 data 12288 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: cmd 60/10:48:67:00:48/00:00:02:00:00/40 tag 9 cdb 0x0 data 8192 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: cmd 60/28:50:77:00:48/00:00:02:00:00/40 tag 10 cdb 0x0 data 20480 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.01: exception Emask 0x100 SAct 0x10000 SErr 0x0 action 0x6 frozen
ata3.01: cmd 60/50:80:4f:00:48/00:00:02:00:00/40 tag 16 cdb 0x0 data 40960 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.02: exception Emask 0x100 SAct 0x20000 SErr 0x0 action 0x6 frozen
ata3.02: cmd 60/50:88:4f:00:48/00:00:02:00:00/40 tag 17 cdb 0x0 data 40960 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.03: exception Emask 0x100 SAct 0x8020 SErr 0x0 action 0x6 frozen
ata3.03: cmd 60/50:28:4f:00:48/00:00:02:00:00/40 tag 5 cdb 0x0 data 40960 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.03: cmd 60/10:78:3f:08:47/00:00:02:00:00/40 tag 15 cdb 0x0 data 8192 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: exception Emask 0x100 SAct 0x7fc48cf SErr 0x0 action 0x6 frozen
ata3.04: cmd 61/38:00:e7:01:48/00:00:02:00:00/40 tag 0 cdb 0x0 data 28672 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/70:08:cf:06:47/00:00:02:00:00/40 tag 1 cdb 0x0 data 57344 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/18:10:bf:01:48/00:00:02:00:00/40 tag 2 cdb 0x0 data 12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/10:18:d7:01:48/00:00:02:00:00/40 tag 3 cdb 0x0 data 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/20:30:1f:02:48/00:00:02:00:00/40 tag 6 cdb 0x0 data 16384 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/10:38:3f:02:48/00:00:02:00:00/40 tag 7 cdb 0x0 data 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/40:58:7f:03:47/00:00:02:00:00/40 tag 11 cdb 0x0 data 32768 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/60:70:d7:03:47/00:00:02:00:00/40 tag 14 cdb 0x0 data 49152 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/58:90:3f:04:47/00:00:02:00:00/40 tag 18 cdb 0x0 data 45056 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/08:98:ff:05:47/00:00:02:00:00/40 tag 19 cdb 0x0 data 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/08:a0:5f:06:47/00:00:02:00:00/40 tag 20 cdb 0x0 data 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/10:a8:bf:06:47/00:00:02:00:00/40 tag 21 cdb 0x0 data 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/00:b0:3f:07:47/01:00:02:00:00/40 tag 22 cdb 0x0 data 131072 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/a8:b8:9f:00:48/00:00:02:00:00/40 tag 23 cdb 0x0 data 86016 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/18:c0:47:01:48/00:00:02:00:00/40 tag 24 cdb 0x0 data 12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/20:c8:5f:01:48/00:00:02:00:00/40 tag 25 cdb 0x0 data 16384 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.04: cmd 61/40:d0:7f:01:48/00:00:02:00:00/40 tag 26 cdb 0x0 data 32768 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.15: hard resetting link
ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata3.00: hard resetting link
ata3.00: softreset failed (timeout)
ata3.00: hard resetting link
ata3.00: COMRESET failed (errno=-5)
ata3.00: reset failed, giving up
ata3.15: hard resetting link
ata3.15: softreset failed (timeout)
ata3.15: hard resetting link
ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata3.00: hard resetting link
ata3.00: softreset failed (timeout)
ata3.00: hard resetting link
ata3.00: COMRESET failed (errno=-5)
ata3.00: reset failed, giving up
ata3.15: hard resetting link
ata3.15: softreset failed (timeout)
ata3.15: hard resetting link
ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata3.00: hard resetting link
ata3.00: softreset failed (timeout)
ata3.00: hard resetting link
ata3.00: COMRESET failed (errno=-5)
ata3.00: reset failed, giving up
ata3.00: failed to recover link after 3 tries, disabling
ata3.00: disabled
ata3: failed to recover PMP, retrying in 5 secs
ata3.03: failed to recover link after 3 tries, disabling
ata3.03: disabled
ata3: failed to recover PMP, retrying in 5 secs
ata3.15: hard resetting link
ata3.15: softreset failed (timeout)
ata3.15: hard resetting link
ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata3.04: hard resetting link
ata3.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.05: hard resetting link
ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.04: configured for UDMA/100
sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 3:0:0:0: [sdc] Add. Sense: No additional sense information
end_request: I/O error, dev sdc, sector 38273103
sd 3:3:0:0: [sdf] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 3:3:0:0: [sdf] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 3:3:0:0: [sdf] Add. Sense: No additional sense information
end_request: I/O error, dev sdf, sector 38273103
sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 3:0:0:0: [sdc] Add. Sense: No additional sense information
end_request: I/O error, dev sdc, sector 38273127
sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 3:0:0:0: [sdc] Add. Sense: No additional sense information
end_request: I/O error, dev sdc, sector 38273143
sd 3:0:0:0: rejecting I/O to offline device
raid5: Disk failure on sdc1, disabling device. Operation continuing on 4 devices
sd 3:3:0:0: rejecting I/O to offline device
sd 3:0:0:0: rejecting I/O to offline device
raid5: Disk failure on sdf1, disabling device. Operation continuing on 3 devices
sd 3:3:0:0: rejecting I/O to offline device
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems & security ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
next prev parent reply other threads:[~2007-10-03 2:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-02 17:04 sil24 PMP works with ST3500641AS but not HDS721010KLA330 Marc MERLIN
2007-10-02 17:15 ` Marc MERLIN
2007-10-03 2:28 ` Marc MERLIN
2007-10-03 2:32 ` Marc MERLIN [this message]
2007-10-03 3:30 ` Tejun Heo
2007-10-03 5:59 ` Marc MERLIN
2007-10-03 6:38 ` Marc MERLIN
2007-10-03 14:08 ` Marc MERLIN
2007-10-07 17:22 ` sil24 PMP works with ST3500641AS but not HDS721010KLA330 (mostly solved) Marc MERLIN
2007-10-08 1:06 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071003023213.GB19430@merlins.org \
--to=marc@merlins.org \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.