From: Kevin <spaceman__spiff@cox.net>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>, Olof Johansson <olof@lixom.net>,
Greg KH <gregkh@suse.de>, "Rafael J. Wysocki" <rjw@sisk.pl>,
"Theodore Ts'o" <tytso@mit.edu>,
Zwane Mwaikambo <zwane@arm.linux.org.uk>,
Justin Forbes <jmforbes@linuxtx.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Chris Wedgwood <reviews@ml.cw.f00f.org>,
Domenico Andreoli <cavokz@gmail.com>, Mark Lord <mlord@pobox.com>,
Randy Dunlap <rdunlap@xenotime.net>,
Michael Krufky <mkrufky@linuxtv.org>,
Chuck Ebbert <cebbert@redhat.com>, Dave Jones <davej@redhat.com>,
akpm@linux-foundation.org, Chuck Wolber <chuckw@quantumlinux.com>,
stable@kernel.org, alan@lxorguk.ukuu.org.uk,
BDFL <volkerdi@slackware.com>
Subject: Re: ARPM shutdown oops (Re: [stable] [patch 09/12] Fix SMP poweroff hangs)
Date: Wed, 10 Oct 2007 20:05:01 -0700 [thread overview]
Message-ID: <200710102005.02184.spaceman__spiff@cox.net> (raw)
In-Reply-To: <alpine.LFD.0.999.0710100747120.3838@woody.linux-foundation.org>
[-- Attachment #1: Type: text/plain, Size: 11628 bytes --]
On Wednesday 10 October 2007 07:57:52 am you wrote:
> On Tue, 9 Oct 2007, Kevin wrote:
> > I don't own a digital camera but I did jot the info down by hand.
>
> Heh, yeah, that's what I used to do too (and still do if a camera isn't
> handy).
>
> > Call Trace:
> > [<c010e852>] apm_bios_call_simple+0x92/0x110
> > [<c0285a0>] acpi_hw_clear_gpe_block+00/0x32
> > [<c010e8ec>] set_system_power_state+0x1c/0x30
> > [<c010f93a>] apm_system_power_off+0x6a/0x80
> > [<c010f8d0>] apm_system_power_off+0x0/0x80
> > [<c010e434>] native_machine_power_off+0x14/0x20
> > [<c010e406>] machine_power_off+0x6/0x10
> > [<c0127cb9>] sys_reboot+0x99/0x140
> >...
> > Code: Bad EIP Value
> > EIP: [<00007825>] 0x7825 SS:ESP 0068:e7305de8
> > /etc/rc.d/rc.0: Line 261: 2796 Segmentation Fault /sbin/poweroff
>
> Ahh. APM. That does explain the strange EIP register values: we're jumping
> into the BIOS, and the BIOS is doing something unexpected.
>
> However, that doesn't really explain the oops, because I don't think
> anything changed in APM from 2.6.22->23, and in particular, I don't think
> it has anything to do with the thing that caused problems for PPC.
>
> We did have some APM *detection* changes, and maybe APM wasn't even
> detected for you before, or it was detected differently. That would be due
> to the bootup changes, I'm Cc'ing Peter Anvin (and the kernel mailing
> list, in case somebody else see a pattern to this).
>
> Can you please
> - try with APM turned off (APM really shouldn't be useful on any machines
> built in the last ten years or so), just to verify that things work
> without APM.
That fixed the problem.
> - send the bootup "dmesg" output and a machine description (and please
> keep people Cc'd - sending things just to me is a sure-fire way to get
> things dropped eventually, if only because I'm a lazy clutz).
Both "dmesg" (before and after the fix) are attached. Also, here is the
machine specs:
Gigabyte Main Board
Name GA-K8NSC -939
Type / Chipset Socket 939 / nVidia nForce3 250 Gb Chipset
Dimensions +++ 35 mm (58 mm radius) around the socket to the next capacitor
or other parts of the
mainboard - for further information see Fit for Fan.
The overall size is 305 x 245mm.
Slots +++ 5x pci, 1x AGP (1.5V 4x/8x), 4x DDR PC2100 - PC3200 (max. 4GB RAM)
Connectors
+++ 1x Floppy, 4x UDMA133, 2x SATA150, 2x seriell, 1x parallel, 2x PS/2,
onBoard 10/100/1000 Mbps base-T Ethernet LAN (Marvell 8001),
8x USB 2.0/1.1 (4x internal but mounting bracket isn't included),
8-Channel AC'97 RealTek ALC850 onboard (1x int. CD in, 1x int. S/PDIF, ext.
Line in, ext. Mic, ext. Line out, int. optional connector for 8-Channel Audio
Combo Kit, not included)
and 3x fan connectors (1x used for chipset fan).
Vcore ++++ BIOS between 0.80 Volt and 1.7 Volt in steps of 0.025 and 0.05
Volt / Jumper not available
Multiplier ++++ BIOS between 4x and 25x (max multi depends on used CPU) /
Jumper not available
FSB ++++ BIOS between 200 and 455 MHz (AGP 66 - 100 MHz) / Jumper not
available
VIO/VDD ++++ VDDR +0.1 - +0.2 / VAGP +0.1 - +0.3 / V HT-Link +0.1 - +0.3
Home page:
http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=1881
BIOS upgrade (F8)
http://www.gigabyte.com.tw/Support/Motherboard/BIOS_Model.aspx?ProductID=1881
Also lspci -v
root@fosters:/home/kevin# lspci -v
00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at f4000000 (32-bit, prefetchable) [size=32M]
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [c0] AGP version 2.0
00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
Subsystem: Giga-byte Technology Unknown device 0c11
Flags: bus master, 66MHz, fast devsel, latency 0
00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
Subsystem: Giga-byte Technology Unknown device 0c11
Flags: 66MHz, fast devsel, IRQ 11
I/O ports at e400 [size=32]
I/O ports at 1c00 [size=64]
I/O ports at 2000 [size=64]
Capabilities: [44] Power Management version 2
00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
(prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Unknown device 5004
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 9
Memory at fd003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
(prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Unknown device 5004
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 9
Memory at fd004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller
(rev a2) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device 5004
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 9
Memory at fd005000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97
Audio Controller (rev a1)
Subsystem: Giga-byte Technology Unknown device a002
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 7
I/O ports at bc00 [size=256]
I/O ports at c000 [size=128]
Memory at fd001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5)
(rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Unknown device 5002
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
[size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
[size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
[size=1]
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5)
(rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Unknown device b002
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at dc00 [size=16]
I/O ports at e000 [size=128]
Capabilities: [44] Power Management version 2
00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge
(rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: f8000000-faffffff
Prefetchable memory behind bridge: f6000000-f7ffffff
00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev
a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: 88000000-880fffff
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Flags: fast devsel
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01)
(prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at f6000000 (32-bit, prefetchable) [size=32M]
Memory at f8000000 (32-bit, non-prefetchable) [size=16K]
Memory at f9000000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at f8020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0
02:06.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 4
I/O ports at a000 [size=32]
Capabilities: [80] Power Management version 2
02:06.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at a400 [size=32]
Capabilities: [80] Power Management version 2
02:06.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20
[EHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) Unknown device 1234
Flags: bus master, medium devsel, latency 32, IRQ 3
Memory at fc004000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
02:07.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast
Decoder (rev 01)
Subsystem: Avermedia Technologies Inc AVerMedia DVD EZMaker
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at fc005000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
02:0b.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit
Ethernet Controller (rev 13)
Subsystem: Giga-byte Technology Marvell 88E8001 Gigabit Ethernet
Controller (Gigabyte)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
Memory at fc000000 (32-bit, non-prefetchable) [size=16K]
I/O ports at a800 [size=256]
[virtual] Expansion ROM at 88000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
root@fosters:/home/kevin#
> - what was the last kernel that worked (and if you can bisect the
> problem, that would likely help enormously)
The last kernel I used was 6.2.22 the "dmesg" the file is attached:
dmesg 2.6.22 line 158 > apm: overridden by ACPI.
dmesg, APM on, has no line > apm: overridden by ACPI.
Also, a diff -u file is enclosed in case it might help.
> Thanks,
>
>
> Linus
Hope this helps
Kevin
--
----------------------- ++ ---------------------------
Kevin Myers
spaceman__spiff@cox.net
http://members.cox.net/jwblack
----------------------- ++ ---------------------------
--
Your Fortune:
The Killer Ducks are coming!!!
[-- Attachment #2: dmesg APM off --]
[-- Type: text/plain, Size: 21434 bytes --]
Linux version 2.6.23-10.10.07 (root@dosxx) (gcc version 4.1.2) #2 Wed Oct 10 11:30:12 MST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000f5060
Entering add_active_range(0, 0, 229376) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 229376
On node 0 totalpages: 229376
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F69F0, 0014 (r0 Nvidia)
ACPI: RSDT 7FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: DSDT 7FFF30C0, 4AC4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 7FFF0000, 0040
ACPI: APIC 7FFF7BC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists in Zone order. Total pages: 227584
Kernel command line: BOOT_IMAGE=dosxx ro root=805
mapped APIC to ffffb000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2411.789 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902652k/917504k available (4212k kernel code, 14368k reserved, 1513k data, 368k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffff5000 - 0xfffff000 ( 40 kB)
vmalloc : 0xf8800000 - 0xffff3000 ( 119 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc069a000 - 0xc06f6000 ( 368 kB)
.data : 0xc051d39a - 0xc069785c (1513 kB)
.text : 0xc0100000 - 0xc051d39a (4212 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4824.85 BogoMIPS (lpj=2412427)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0eb8)
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb0a0, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
ACPI: Power Resource [ISAV] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
pnp: 00:00: ioport range 0x1000-0x107f has been reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff has been reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0xcc000-0xcffff has been reserved
pnp: 00:01: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:01: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: f8000000-faffffff
PREFETCH window: f6000000-f7ffffff
PCI: Bridge: 0000:00:0e.0
IO window: a000-afff
MEM window: fb000000-fcffffff
PREFETCH window: 88000000-880fffff
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NTFS driver 2.1.28 [Flags: R/W].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.102
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 5 (level, low) -> IRQ 5
[drm] Initialized mga 3.2.1 20051102 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
loop: module loaded
sk98lin: driver has been replaced by the skge driver and is scheduled for removal
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hda: Maxtor 6L100P0, ATA DISK drive
hdb: WDC WD800JB-00CRA1, ATA DISK drive
hda: selected mode 0x46
hdb: selected mode 0x45
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DVD-RW IDE1004, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
hdc: drive side 80-wire cable detection failed, limiting max speed to UDMA33
hdc: selected mode 0x42
hdd: selected mode 0x44
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 195810959 sectors (100255 MB)
native capacity is 195813072 sectors (100256 MB)
hda: Host Protected Area disabled.
hda: 195813072 sectors (100256 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
hdb: max request size: 128KiB
hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes not supported
hdb: hdb1
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2449]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.2
Copyright(c) 2004-2007 Emulex. All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
sata_nv 0000:00:0a.0: version 3.5
ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LFID] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001dc00 irq 11
ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001dc08 irq 11
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: Host Protected Area detected:
current size: 586070255 sectors
native size: 586072368 sectors
ata1.00: ATA-7: ST3300620AS, 3.AAD, max UDMA/133
ata1.00: 586070255 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: Host Protected Area detected:
current size: 586070255 sectors
native size: 586072368 sectors
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3300620AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 2:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 9, io mem 0xfd005000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:02:06.2[C] -> Link [LNK1] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:02:06.2: EHCI Host Controller
ehci_hcd 0000:02:06.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:02:06.2: irq 3, io mem 0xfc004000
ehci_hcd 0000:02:06.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 9, io mem 0xfd003000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:02.1: irq 9, io mem 0xfd004000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNK3] -> GSI 4 (level, low) -> IRQ 4
uhci_hcd 0000:02:06.0: UHCI Host Controller
uhci_hcd 0000:02:06.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:02:06.0: irq 4, io base 0x0000a000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:06.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:02:06.1: UHCI Host Controller
uhci_hcd 0000:02:06.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:02:06.1: irq 10, io base 0x0000a400
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 3-3: new low speed USB device using ohci_hcd and address 2
usb 3-3: configuration #1 chosen from 1 choice
usb 3-4: new full speed USB device using ohci_hcd and address 3
usb 3-4: configuration #1 chosen from 1 choice
usb 4-3: new low speed USB device using ohci_hcd and address 2
usb 4-3: configuration #1 chosen from 1 choice
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input0
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-3
input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb4/4-3/4-3:1.0/input/input1
input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3
input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb4/4-3/4-3:1.1/input/input2
input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 50762 usecs
intel8x0: clocking to 46857
ALSA device list:
#0: NVidia CK8S with ALC850 at irq 7
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 368k freed
Adding 1566328k swap on /dev/sda3. Priority:-1 extents:1 across:1566328k
EXT3 FS on sda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hda1.
[-- Attachment #3: dmesg APM on --]
[-- Type: text/plain, Size: 21490 bytes --]
Linux version 2.6.23-10.09.07 (root@dosxx) (gcc version 4.1.2) #1 Tue Oct 9 20:19:03 MST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000f5060
Entering add_active_range(0, 0, 229376) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 229376
On node 0 totalpages: 229376
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F69F0, 0014 (r0 Nvidia)
ACPI: RSDT 7FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: DSDT 7FFF30C0, 4AC4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 7FFF0000, 0040
ACPI: APIC 7FFF7BC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists in Zone order. Total pages: 227584
Kernel command line: BOOT_IMAGE=dosxx ro root=805
mapped APIC to ffffb000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2411.744 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902632k/917504k available (4218k kernel code, 14388k reserved, 1519k data, 372k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffff5000 - 0xfffff000 ( 40 kB)
vmalloc : 0xf8800000 - 0xffff3000 ( 119 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc069e000 - 0xc06fb000 ( 372 kB)
.data : 0xc051e9ae - 0xc069a87c (1519 kB)
.text : 0xc0100000 - 0xc051e9ae (4218 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4824.86 BogoMIPS (lpj=2412431)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0eb8)
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb0a0, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
ACPI: Power Resource [ISAV] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
pnp: 00:00: ioport range 0x1000-0x107f has been reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff has been reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0xcc000-0xcffff has been reserved
pnp: 00:01: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:01: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: f8000000-faffffff
PREFETCH window: f6000000-f7ffffff
PCI: Bridge: 0000:00:0e.0
IO window: a000-afff
MEM window: fb000000-fcffffff
PREFETCH window: 88000000-880fffff
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
NTFS driver 2.1.28 [Flags: R/W].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.102
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 5 (level, low) -> IRQ 5
[drm] Initialized mga 3.2.1 20051102 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
loop: module loaded
sk98lin: driver has been replaced by the skge driver and is scheduled for removal
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hda: Maxtor 6L100P0, ATA DISK drive
hdb: WDC WD800JB-00CRA1, ATA DISK drive
hda: selected mode 0x46
hdb: selected mode 0x45
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DVD-RW IDE1004, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR DVDR PX-316A, ATAPI CD/DVD-ROM drive
hdc: drive side 80-wire cable detection failed, limiting max speed to UDMA33
hdc: selected mode 0x42
hdd: selected mode 0x44
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 195810959 sectors (100255 MB)
native capacity is 195813072 sectors (100256 MB)
hda: Host Protected Area disabled.
hda: 195813072 sectors (100256 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
hdb: max request size: 128KiB
hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes not supported
hdb: hdb1
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2449]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.2
Copyright(c) 2004-2007 Emulex. All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
sata_nv 0000:00:0a.0: version 3.5
ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LFID] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001dc00 irq 11
ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001dc08 irq 11
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: Host Protected Area detected:
current size: 586070255 sectors
native size: 586072368 sectors
ata1.00: ATA-7: ST3300620AS, 3.AAD, max UDMA/133
ata1.00: 586070255 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: Host Protected Area detected:
current size: 586070255 sectors
native size: 586072368 sectors
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3300620AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 2:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 9, io mem 0xfd005000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:02:06.2[C] -> Link [LNK1] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:02:06.2: EHCI Host Controller
ehci_hcd 0000:02:06.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:02:06.2: irq 3, io mem 0xfc004000
ehci_hcd 0000:02:06.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 9, io mem 0xfd003000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:02.1: irq 9, io mem 0xfd004000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNK3] -> GSI 4 (level, low) -> IRQ 4
uhci_hcd 0000:02:06.0: UHCI Host Controller
uhci_hcd 0000:02:06.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:02:06.0: irq 4, io base 0x0000a000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:06.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:02:06.1: UHCI Host Controller
uhci_hcd 0000:02:06.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:02:06.1: irq 10, io base 0x0000a400
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 3-3: new low speed USB device using ohci_hcd and address 2
usb 3-3: configuration #1 chosen from 1 choice
usb 3-4: new full speed USB device using ohci_hcd and address 3
usb 3-4: configuration #1 chosen from 1 choice
usb 4-3: new low speed USB device using ohci_hcd and address 2
usb 4-3: configuration #1 chosen from 1 choice
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input0
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-3
input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb4/4-3/4-3:1.0/input/input1
input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3
input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb4/4-3/4-3:1.1/input/input2
input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 50748 usecs
intel8x0: clocking to 46844
ALSA device list:
#0: NVidia CK8S with ALC850 at irq 7
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 372k freed
Adding 1566328k swap on /dev/sda3. Priority:-1 extents:1 across:1566328k
EXT3 FS on sda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hda1.
[-- Attachment #4: dmesg-2.6.22 --]
[-- Type: text/plain, Size: 19832 bytes --]
Linux version 2.6.22-08.10.07a (root@dosxx) (gcc version 4.1.2) #12 Wed Oct 10 19:34:34 MST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
Entering add_active_range(0, 0, 229376) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
early_node_map[1] active PFN ranges
0: 0 -> 229376
On node 0 totalpages: 229376
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP 000F69F0, 0014 (r0 Nvidia)
ACPI: RSDT 7FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: DSDT 7FFF30C0, 4AC4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 7FFF0000, 0040
ACPI: APIC 7FFF7BC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists. Total pages: 227584
Kernel command line: BOOT_IMAGE=dosxx ro root=805
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2411.794 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902508k/917504k available (4313k kernel code, 14576k reserved, 1555k data, 364k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffff8000 - 0xfffff000 ( 28 kB)
vmalloc : 0xf8800000 - 0xffff6000 ( 119 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc06be000 - 0xc0719000 ( 364 kB)
.data : 0xc05367ad - 0xc06bb69c (1555 kB)
.text : 0xc0100000 - 0xc05367ad (4313 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4824.85 BogoMIPS (lpj=2412429)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0eb8)
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb0a0, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
ACPI: Power Resource [ISAV] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:00: ioport range 0x1000-0x107f has been reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff has been reserved
Time: tsc clocksource has been installed.
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0xcc000-0xcffff has been reserved
pnp: 00:01: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:01: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: f8000000-faffffff
PREFETCH window: f6000000-f7ffffff
PCI: Bridge: 0000:00:0e.0
IO window: a000-afff
MEM window: fb000000-fcffffff
PREFETCH window: 88000000-880fffff
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.28 [Flags: R/W].
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.102 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 5 (level, low) -> IRQ 5
[drm] Initialized mga 3.2.1 20051102 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
loop: module loaded
sk98lin: driver has been replaced by the skge driver and is scheduled for removal
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hda: Maxtor 6L100P0, ATA DISK drive
hdb: WDC WD800JB-00CRA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DVD-RW IDE1004, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 195810959 sectors (100255 MB)
native capacity is 195813072 sectors (100256 MB)
hda: Host Protected Area disabled.
hda: 195813072 sectors (100256 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
hdb: max request size: 128KiB
hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes not supported
hdb: hdb1
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache<4>hdc: drive side 80-wire cable detection failed, limiting max speed to UDMA33
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2437]-mh4)
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.12
Copyright(c) 2004-2007 Emulex. All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
sata_nv 0000:00:0a.0: version 3.4
ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LFID] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001dc00 irq 11
ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001dc08 irq 11
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: Host Protected Area detected:
current size: 586070255 sectors
native size: 586072368 sectors
ata1.00: ATA-7: ST3300620AS, 3.AAD, max UDMA/133
ata1.00: 586070255 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: Host Protected Area detected:
current size: 586070255 sectors
native size: 586072368 sectors
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3300620AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 2:0:0:0: [sda] Attached SCSI disk
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 9, io mem 0xfd003000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 9, io mem 0xfd004000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNK3] -> GSI 4 (level, low) -> IRQ 4
uhci_hcd 0000:02:06.0: UHCI Host Controller
uhci_hcd 0000:02:06.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:02:06.0: irq 4, io base 0x0000a000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-3: new low speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt 0000:02:06.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:02:06.1: UHCI Host Controller
uhci_hcd 0000:02:06.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:02:06.1: irq 10, io base 0x0000a400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
usb 1-4: new full speed USB device using ohci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
usb 2-3: new low speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input0
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-3
input: Logitech Logitech USB Keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3
input: Logitech Logitech USB Keyboard as /class/input/input2
input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 50771 usecs
intel8x0: clocking to 46866
ALSA device list:
#0: NVidia CK8S with ALC850 at irq 7
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 364k freed
Adding 1566328k swap on /dev/sda3. Priority:-1 extents:1 across:1566328k
EXT3 FS on sda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hda1.
[-- Attachment #5: DOT_config.txt --]
[-- Type: text/x-java, Size: 19248 bytes --]
# diff -u .config-2.6.22 .config-2.6.23
--- .config-2.6.22 2007-10-10 19:27:42.000000000 -0700
+++ .config-2.6.23 2007-10-10 11:23:33.000000000 -0700
@@ -1,12 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Wed Oct 10 19:27:39 2007
+# Linux kernel version: 2.6.23
+# Wed Oct 10 11:23:31 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
@@ -23,29 +25,24 @@
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-08.10.07a"
+CONFIG_LOCALVERSION="-10.10.07"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_IPC_NS=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-CONFIG_UTS_NS=y
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
@@ -67,7 +64,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -77,37 +73,30 @@
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
@@ -150,9 +139,9 @@
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -166,14 +155,17 @@
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_MODEL=4
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
# CONFIG_HPET_TIMER is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
-# CONFIG_X86_UP_APIC is not set
+CONFIG_X86_UP_APIC=y
+# CONFIG_X86_UP_IOAPIC is not set
+CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_MCE=y
-CONFIG_X86_MCE_NONFATAL=m
+# CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
@@ -185,13 +177,15 @@
#
# Firmware Drivers
#
-CONFIG_EDD=m
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
+# CONFIG_EDD is not set
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+CONFIG_DMIID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -206,9 +200,11 @@
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
-CONFIG_MATH_EMULATION=y
-CONFIG_MTRR=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_MTRR is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
@@ -226,19 +222,17 @@
# Power management options (ACPI, APM)
#
CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SLEEP_PROC_FS=y
-# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
@@ -258,13 +252,7 @@
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
# CONFIG_ACPI_SBS is not set
-CONFIG_APM=y
-# CONFIG_APM_IGNORE_USER_SUSPEND is not set
-# CONFIG_APM_DO_ENABLE is not set
-# CONFIG_APM_CPU_IDLE is not set
-# CONFIG_APM_DISPLAY_BLANK is not set
-# CONFIG_APM_ALLOW_INTS is not set
-# CONFIG_APM_REAL_MODE_POWER_OFF is not set
+# CONFIG_APM is not set
#
# CPU Frequency scaling
@@ -293,7 +281,6 @@
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
-CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
@@ -321,8 +308,7 @@
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
@@ -344,8 +330,8 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
#
# Networking
@@ -372,7 +358,6 @@
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
@@ -434,9 +419,7 @@
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-# CONFIG_RXKAD is not set
+# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
@@ -447,6 +430,7 @@
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -459,21 +443,9 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
@@ -483,10 +455,7 @@
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
@@ -495,7 +464,7 @@
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -504,18 +473,16 @@
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_IBM_ASM=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
-CONFIG_SGI_IOC4=m
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-# CONFIG_SONYPI_COMPAT is not set
+# CONFIG_TIFM_7XX1 is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_MSI_LAPTOP is not set
+# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
@@ -530,7 +497,7 @@
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=m
+CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
@@ -540,7 +507,7 @@
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
-CONFIG_BLK_DEV_IDEPNP=y
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
@@ -590,6 +557,7 @@
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
@@ -608,7 +576,7 @@
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
@@ -622,11 +590,9 @@
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
+# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_3W_9XXX=y
@@ -768,75 +734,32 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-
-#
-# Controllers
-#
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=y
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-
-#
-# I2O device support
-#
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
@@ -899,15 +822,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -915,7 +830,7 @@
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
+CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
@@ -979,6 +894,7 @@
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
@@ -1029,6 +945,7 @@
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
@@ -1052,11 +969,12 @@
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
@@ -1095,16 +1013,12 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
@@ -1136,6 +1050,7 @@
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
+# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
@@ -1148,11 +1063,13 @@
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
+# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -1163,11 +1080,25 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
#
-# Dallas's 1-wire bus
+# 1-wire Slaves
#
-# CONFIG_W1 is not set
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
@@ -1255,6 +1186,7 @@
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
+# CONFIG_TUNER_TEA5761 is not set
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
@@ -1264,7 +1196,6 @@
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
@@ -1357,6 +1288,7 @@
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
# CONFIG_DVB_USB_OPERA1 is not set
+# CONFIG_DVB_USB_AF9005 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
@@ -1460,6 +1392,7 @@
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DAB=y
@@ -1477,16 +1410,16 @@
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
-CONFIG_MDA_CONSOLE=m
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_VIDEO_SELECT is not set
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
@@ -1574,6 +1507,7 @@
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1631,14 +1565,15 @@
# CONFIG_SND_SOC is not set
#
-# Open Sound System
+# SoC Audio support for SuperH
#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
#
-# HID Devices
+# Open Sound System
#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
@@ -1654,10 +1589,7 @@
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1671,16 +1603,16 @@
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
-CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1688,6 +1620,7 @@
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
@@ -1772,6 +1705,7 @@
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
#
# MMC/SD Host Controller Drivers
@@ -1779,11 +1713,8 @@
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
#
# LED drivers
@@ -1792,20 +1723,9 @@
#
# LED Triggers
#
-
-#
-# InfiniBand support
-#
+# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
# CONFIG_EDAC is not set
-
-#
-# Real Time Clock
-#
# CONFIG_RTC_CLASS is not set
#
@@ -1816,17 +1736,19 @@
#
# DMA Clients
#
-CONFIG_NET_DMA=y
+# CONFIG_NET_DMA is not set
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
#
-# Virtualization
+# Userspace I/O
#
-# CONFIG_KVM is not set
+# CONFIG_UIO is not set
#
# File systems
@@ -1919,24 +1841,25 @@
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1993,10 +1916,7 @@
#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
@@ -2013,6 +1933,8 @@
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
@@ -2023,12 +1945,8 @@
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
-CONFIG_SECURITY_CAPABILITIES=m
+CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=m
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
@@ -2070,10 +1988,7 @@
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
@@ -2087,6 +2002,7 @@
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
@@ -2094,6 +2010,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
next prev parent reply other threads:[~2007-10-11 4:59 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20071008180406.052382073@mini.kroah.org>
2007-10-08 18:05 ` [patch 00/12] 2.6.22.10 -stable review Greg KH
2007-10-08 18:06 ` [patch 01/12] scsi_transport_spi: fix domain validation failure from incorrect width setting Greg KH
2007-10-08 18:06 ` [patch 02/12] sky2: reduce impact of watchdog timer Greg KH
2007-10-08 18:06 ` [patch 03/12] sky2: fix VLAN receive processing Greg KH
2007-10-08 18:06 ` [patch 04/12] sky2: fix transmit state on resume Greg KH
2007-10-08 18:06 ` [patch 05/12] libata: update drive blacklists Greg KH
2007-10-08 18:06 ` [patch 06/12] Fix ppp_mppe kernel stack usage Greg KH
2007-10-08 18:06 ` [patch 07/12] i2c-algo-bit: Read block data bugfix Greg KH
2007-10-08 18:06 ` [patch 08/12] NLM: Fix a circular lock dependency in lockd Greg KH
2007-10-08 20:01 ` Roel Kluin
2007-10-09 15:00 ` Trond Myklebust
2007-10-09 15:13 ` Greg KH
2007-10-09 15:27 ` Trond Myklebust
2007-10-09 20:41 ` [stable] " Greg KH
2007-10-08 18:06 ` [patch 09/12] Fix SMP poweroff hangs Greg KH
2007-10-09 15:17 ` Olof Johansson
2007-10-09 22:20 ` [stable] " Greg KH
2007-10-09 23:21 ` Thomas Gleixner
2007-10-09 23:27 ` Linus Torvalds
2007-10-09 23:35 ` Thomas Gleixner
2007-10-10 5:29 ` Linus Torvalds
[not found] ` <200710092359.47144.spaceman__spiff@cox.net>
2007-10-10 14:57 ` ARPM shutdown oops (Re: [stable] [patch 09/12] Fix SMP poweroff hangs) Linus Torvalds
2007-10-10 16:31 ` H. Peter Anvin
2007-10-11 3:05 ` Kevin [this message]
2007-10-11 15:31 ` Linus Torvalds
2007-10-11 18:42 ` Jeff Garzik
2007-10-11 19:19 ` Dave Jones
2007-10-11 20:55 ` Rafael J. Wysocki
2007-10-11 23:27 ` APM " Adrian Bunk
2007-10-12 12:05 ` Rafael J. Wysocki
2007-10-10 0:03 ` [stable] [patch 09/12] Fix SMP poweroff hangs Olof Johansson
2007-10-10 0:03 ` Olof Johansson
2007-10-10 0:08 ` [PATCH] powerpc: don't enable cpu hotplug on mpic-based pseries Olof Johansson
2007-10-10 0:08 ` Olof Johansson
2007-10-10 0:18 ` Stephen Rothwell
2007-10-10 0:18 ` Stephen Rothwell
2007-10-10 0:38 ` [PATCH v2] " Olof Johansson
2007-10-10 10:08 ` Milton Miller
2007-10-10 10:08 ` Milton Miller
2007-10-10 16:43 ` Olof Johansson
2007-10-10 16:43 ` Olof Johansson
2007-10-11 15:25 ` Milton Miller
2007-10-11 5:52 ` Paul Mackerras
2007-10-11 5:59 ` Olof Johansson
2007-10-11 21:42 ` Milton Miller
2007-10-11 0:24 ` [stable] [patch 09/12] Fix SMP poweroff hangs Paul Mackerras
2007-10-09 23:28 ` Greg KH
[not found] ` <alpine.LFD.0.999.0710091625520.3838@woody.linux%foundation.org>
2007-10-10 10:06 ` Milton Miller
2007-10-10 11:35 ` Rafael J. Wysocki
2007-10-10 11:35 ` Rafael J. Wysocki
2007-10-10 10:06 ` Milton Miller
2007-10-08 18:06 ` [patch 10/12] Fix timer_stats printout of events/sec Greg KH
2007-10-08 18:06 ` [patch 11/12] SELinux: clear parent death signal on SID transitions Greg KH
2007-10-08 18:06 ` [patch 12/12] i386: Use global flag to disable broken local apic timer on AMD CPUs Greg KH
2007-10-08 18:09 ` [patch 00/12] 2.6.22.10 -stable review Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710102005.02184.spaceman__spiff@cox.net \
--to=spaceman__spiff@cox.net \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=cavokz@gmail.com \
--cc=cebbert@redhat.com \
--cc=chuckw@quantumlinux.com \
--cc=davej@redhat.com \
--cc=greg@kroah.com \
--cc=gregkh@suse.de \
--cc=jmforbes@linuxtx.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkrufky@linuxtv.org \
--cc=mlord@pobox.com \
--cc=olof@lixom.net \
--cc=rdunlap@xenotime.net \
--cc=reviews@ml.cw.f00f.org \
--cc=rjw@sisk.pl \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=tytso@mit.edu \
--cc=volkerdi@slackware.com \
--cc=zwane@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.