Re: [PATCH] PowerPC: Fix find_legacy_serial_ports on OPB.

[Arnd Bergmann <arnd@arndb.de>]

On Thursday 11 October 2007, Valentine Barshak wrote:
> Currently find_legacy_serial_ports() can find no serial ports on the OPB.
> Thus no legacy boot console can be initialized. Just the early udbg console
> works, which is initialized with udbg_init_44x_as1() on the UART's physical
> address specified in kernel config. This happens because we look for ns16750
> and higher serial devices only and expect opb node to have a device type
> property. This patch makes it look for ns16550 compatible devices and use
> of_device_is_compatible() for opb instead of checking device type.
> Lack of legacy serial ports found causes problems for KGDB over serial.
> 
> Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>

The patch would make sense if we were only dealing with flattened device
tree systems at this point. Unfortunately, IBM is shipping hardware that
encodes the serial port in exactly the way that find_legacy_serial_ports
is looking for (parent->type == "opb", compatible = "ns16750" "ns16550"
"ns16450" i8250").

Changing the search for ns16750 to ns16550 should be fine, but unnecessary
because AFAIK, all OPB serial imlpementations are actually ns16750 and
should have that in the device tree as well.

For the device type of the bus, please check for both compatible and
type, so that it still works on machines that are missing the compatible
property.

	Arnd <><