From: "Jan-Simon Möller" <dl9pf@gmx.de>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
alsa-devel@alsa-project.org
Subject: Re: hda-intel: no soundcard with current linus' git tree
Date: Thu, 18 Oct 2007 10:49:48 +0200 [thread overview]
Message-ID: <200710181049.48896.dl9pf@gmx.de> (raw)
In-Reply-To: <4716C68C.4030504@garzik.org>
I've also no sound. Had it working using the alsa.git tree _before_ the last
merge (>48h). Needed to use model=asus for this fujitsu v5505 here.
Now it doesn't work, even with other model-options (fujitsu, laptop).
legolas:/proc/asound # cat cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc400000 irq 22
legolas:/proc/asound # cat pcm
00-01: Conexant Digital : Conexant Digital : playback 1
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
legolas:/proc/asound # cat hwdep
00-00: HDA Codec 0
legolas:/proc/asound # cat devices
2: : timer
3: [ 0- 1]: digital audio playback
4: [ 0- 0]: digital audio playback
5: [ 0- 0]: digital audio capture
6: [ 0- 0]: hardware dependent
7: [ 0] : control
8: : sequencer
legolas:/proc/asound # cat card0/codec#0
Codec: Conexant CX20549 (Venice)
Address: 0
Vendor Id: 0x14f15045
Subsystem Id: 0x1734110e
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x140]: 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
Amp-Out vals: [0x2b 0x2b]
Pincap 0x0810014: OUT EAPD Detect
Pin Default 0x92170110: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 2
0x19 0x17*
Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
Amp-Out vals: [0x2b 0x2b]
Pincap 0x08113c: IN OUT HP Detect
Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Power: 0x0
Connection: 2
0x19 0x17*
Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
Amp-Out vals: [0x2b 0x2b]
Pincap 0x08113c: IN OUT HP Detect
Pin Default 0x01a19020: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x20: IN
Power: 0x0
Connection: 2
0x19 0x17*
Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x214571f0: [Jack] SPDIF Out at Sep Rear
Conn = Optical, Color = Yellow
Pin-ctls: 0x00:
Connection: 1
0x18
Node 0x14 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081124: IN Detect
Pin Default 0x97a7012e: [Fixed] Mic at Int Riser
Conn = Analog, Color = Unknown
Pin-ctls: 0x24: IN
Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1
Amp-Out vals: [0x06]
Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1
Amp-In vals: [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94]
Power: 0x0
Connection: 5
0x19 0x14 0x12 0x11 0x15
Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital
PCM:
rates [0x40]: 48000
bits [0x6]: 16 20
formats [0x5]: PCM AC3
Node 0x19 [Audio Output] wcaps 0xc11: Stereo
PCM:
rates [0x540]: 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: 0x0
Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1
Amp-In vals: [0x17 0x17] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Power: 0x0
Connection: 5
0x17 0x14* 0x12 0x11 0x15
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Best regards
Jan-Simon
next prev parent reply other threads:[~2007-10-18 8:49 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-16 22:18 hda-intel: no soundcard with current linus' git tree Thomas Meyer
2007-10-17 2:47 ` Maxim Levitsky
2007-10-17 2:47 ` Maxim Levitsky
2007-10-17 8:42 ` Takashi Iwai
2007-10-17 18:17 ` Thomas Meyer
2007-10-18 1:51 ` Maxim Levitsky
2007-10-18 1:51 ` Maxim Levitsky
2007-10-18 1:53 ` Maxim Levitsky
2007-10-18 1:53 ` Maxim Levitsky
2007-10-18 5:57 ` Takashi Iwai
2007-10-18 5:57 ` Takashi Iwai
2007-10-18 14:21 ` Maxim Levitsky
2007-10-18 14:21 ` Maxim Levitsky
2007-10-18 13:49 ` Takashi Iwai
2007-10-18 13:49 ` Takashi Iwai
2007-10-18 15:24 ` Maxim Levitsky
2007-10-18 15:24 ` Maxim Levitsky
2007-10-18 14:47 ` Takashi Iwai
2007-10-18 14:47 ` Takashi Iwai
2007-10-21 15:42 ` Thomas Meyer
2007-10-18 2:35 ` Jeff Garzik
2007-10-18 3:36 ` Maxim Levitsky
2007-10-18 3:38 ` Jeff Garzik
2007-10-18 4:10 ` Maxim Levitsky
2007-10-18 4:24 ` Jeff Garzik
2007-10-18 6:02 ` Takashi Iwai
2007-10-18 8:49 ` Jan-Simon Möller [this message]
2007-10-18 8:11 ` Takashi Iwai
2007-10-18 8:11 ` [alsa-devel] " Takashi Iwai
2007-10-18 11:50 ` Jan-Simon Möller
2007-10-18 11:50 ` [alsa-devel] " Jan-Simon Möller
2007-10-18 15:05 ` Jan-Simon Möller
2007-10-18 14:39 ` Takashi Iwai
2007-10-18 14:39 ` [alsa-devel] " Takashi Iwai
2007-10-18 16:19 ` Jan-Simon Möller
2007-10-18 16:19 ` [alsa-devel] " Jan-Simon Möller
2007-10-19 5:05 ` Takashi Iwai
2007-10-19 5:05 ` [alsa-devel] " Takashi Iwai
2007-10-19 10:46 ` Jan-Simon Möller
2007-10-19 10:46 ` [alsa-devel] " Jan-Simon Möller
2007-10-19 10:02 ` Takashi Iwai
2007-10-19 10:02 ` [alsa-devel] " Takashi Iwai
2007-10-21 14:57 ` Jan-Simon Möller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710181049.48896.dl9pf@gmx.de \
--to=dl9pf@gmx.de \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.