All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Garzik <jeff@garzik.org>
To: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Thomas Meyer <thomas@m3y3r.de>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Takashi Iwai <tiwai@suse.de>
Subject: Re: hda-intel: no soundcard with current linus' git tree
Date: Wed, 17 Oct 2007 23:38:06 -0400	[thread overview]
Message-ID: <4716D51E.2010509@garzik.org> (raw)
In-Reply-To: <200710180536.18611.maximlevitsky@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 297 bytes --]

Maxim Levitsky wrote:
> What sound codec do you have?
> cat /proc/asound/Intel/codec*

Attached.

I'm on x86-64/Fedora 7 FWIW.


> You probably have different issue, since your card is probed correctly

Agreed (though I was surprised that a correct probe did not yield a 
single printk).

	Jeff



[-- Attachment #2: codec.txt --]
[-- Type: text/plain, Size: 4412 bytes --]

Codec: SigmaTel STAC9221D A2
Address: 2
Vendor Id: 0x83847683
Subsystem Id: 0x80860417
Revision Id: 0x103201
No Modem Function Group found
Default PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
  Amp-Out caps: N/A
  Amp-Out vals:  [0xff 0xff]
  Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
  Amp-Out caps: N/A
  Amp-Out vals:  [0xff 0xff]
  Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
  Amp-Out caps: N/A
  Amp-Out vals:  [0xff 0xff]
  Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
  Amp-Out caps: N/A
  Amp-Out vals:  [0xff 0xff]
  Power: 0x0
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
  Power: 0x0
  Connection: 1
     0x17
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
  Power: 0x0
  Connection: 1
     0x18
Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital
  PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Connection: 1
     0x11
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x08173f: IN OUT HP Detect
  Pin Default 0x0221401f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
  Pin-ctls: 0xc0: OUT HP
  Connection: 1
     0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x081737: IN OUT Detect
  Pin Default 0x01011012: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x081737: IN OUT Detect
  Pin Default 0x01813024: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
  Pin-ctls: 0x20: IN
  Connection: 1
     0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x08173f: IN OUT HP Detect
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
  Pincap 0x0824: IN Detect
  Pin Default 0x01a19021: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
  Pin-ctls: 0x20: IN
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x0837: IN OUT Detect
  Pin Default 0x01016011: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Orange
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x05
Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital
  Pincap 0x0810: OUT
  Pin Default 0x01452130: [Jack] SPDIF Out at Ext Rear
    Conn = Optical, Color = Grey
  Pin-ctls: 0x40: OUT
  Connection: 3
     0x08* 0x17 0x19
Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital
  Pincap 0x0810024: IN EAPD Detect
  Pin Default 0x40000100: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x00:
  Power: 0x0
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 7
     0x0e* 0x15 0x0f 0x0b 0x0c 0x0d 0x0a
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 7
     0x0e* 0x15 0x0f 0x0b 0x0c 0x0d 0x0a
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
  Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
  Amp-Out vals:  [0x00]
Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x0820: IN
  Pin Default 0x02a19320: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
  Pin-ctls: 0x20: IN
Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono
Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In
  Amp-In caps: N/A
  Amp-In vals:  [0x07 0x07]
  Connection: 1
     0x12
Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In
  Amp-In caps: N/A
  Amp-In vals:  [0x80 0x80]
  Connection: 1
     0x13
Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital
Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital
  Pincap 0x0810: OUT
  Pin Default 0x40000100: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x00:
  Connection: 1
     0x1a

  reply	other threads:[~2007-10-18  3:38 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-16 22:18 hda-intel: no soundcard with current linus' git tree Thomas Meyer
2007-10-17  2:47 ` Maxim Levitsky
2007-10-17  2:47   ` Maxim Levitsky
2007-10-17  8:42 ` Takashi Iwai
2007-10-17 18:17   ` Thomas Meyer
2007-10-18  1:51     ` Maxim Levitsky
2007-10-18  1:51       ` Maxim Levitsky
2007-10-18  1:53       ` Maxim Levitsky
2007-10-18  1:53         ` Maxim Levitsky
2007-10-18  5:57         ` Takashi Iwai
2007-10-18  5:57           ` Takashi Iwai
2007-10-18 14:21           ` Maxim Levitsky
2007-10-18 14:21             ` Maxim Levitsky
2007-10-18 13:49             ` Takashi Iwai
2007-10-18 13:49               ` Takashi Iwai
2007-10-18 15:24               ` Maxim Levitsky
2007-10-18 15:24                 ` Maxim Levitsky
2007-10-18 14:47                 ` Takashi Iwai
2007-10-18 14:47                   ` Takashi Iwai
2007-10-21 15:42               ` Thomas Meyer
2007-10-18  2:35 ` Jeff Garzik
2007-10-18  3:36   ` Maxim Levitsky
2007-10-18  3:38     ` Jeff Garzik [this message]
2007-10-18  4:10       ` Maxim Levitsky
2007-10-18  4:24         ` Jeff Garzik
2007-10-18  6:02       ` Takashi Iwai
2007-10-18  8:49   ` Jan-Simon Möller
2007-10-18  8:11     ` Takashi Iwai
2007-10-18  8:11       ` [alsa-devel] " Takashi Iwai
2007-10-18 11:50       ` Jan-Simon Möller
2007-10-18 11:50         ` [alsa-devel] " Jan-Simon Möller
2007-10-18 15:05         ` Jan-Simon Möller
2007-10-18 14:39           ` Takashi Iwai
2007-10-18 14:39             ` [alsa-devel] " Takashi Iwai
2007-10-18 16:19             ` Jan-Simon Möller
2007-10-18 16:19               ` [alsa-devel] " Jan-Simon Möller
2007-10-19  5:05               ` Takashi Iwai
2007-10-19  5:05                 ` [alsa-devel] " Takashi Iwai
2007-10-19 10:46                 ` Jan-Simon Möller
2007-10-19 10:46                   ` [alsa-devel] " Jan-Simon Möller
2007-10-19 10:02                   ` Takashi Iwai
2007-10-19 10:02                     ` [alsa-devel] " Takashi Iwai
2007-10-21 14:57                     ` Jan-Simon Möller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4716D51E.2010509@garzik.org \
    --to=jeff@garzik.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maximlevitsky@gmail.com \
    --cc=thomas@m3y3r.de \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.