From: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
To: Cedric Le Goater <clg-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
Cc: cornelia.huck-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org,
Christian-YRGon0hq2jhQetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
heiko.carstens-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Borntraeger <borntraeger-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org>,
schwidefsky-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org,
Linux Containers
<containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org>,
sam-uyr5N9Q2VtJg9hUCZPvPmw@public.gmane.org,
"Serge E. Hallyn" <serge-A9i7LUbDfNHQT0dZR+AlfA@public.gmane.org>
Subject: Re: 2.6.23-mm1 s390 driver problem
Date: Fri, 19 Oct 2007 02:27:19 -0700 [thread overview]
Message-ID: <20071019022719.537ee71f.akpm@linux-foundation.org> (raw)
In-Reply-To: <471875E0.8040308-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
On Fri, 19 Oct 2007 11:16:16 +0200 Cedric Le Goater <clg-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org> wrote:
> Martin Schwidefsky wrote:
> > On Thu, 2007-10-18 at 15:31 -0500, Serge E. Hallyn wrote:
> >> Quoting Christian Borntraeger (borntraeger-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org):
> >>> Am Donnerstag, 18. Oktober 2007 schrieb Serge E. Hallyn:
> >>>> Sigh, well this turned out less informative than I'd liked.
> >>>> After bisecting 2.6.23 to 2.6.23-mm1, I found that
> >>>> git-s390.patch is the one breaking my s390 boot :(
> >>>> (Frown bc it's a conglomeration of patches0
> >>>>
> >>>> Symptom is:
> >>>> "Cannot open root device "dasdd2" or unknown-block(94,14)"
> >>>> even though dasdd2 appeared to be found earlier in the boot. I also
> >>>> get
> >>> Can you post the full console output from IPL to the unsuccessful end?
> >> Yeah, sorry, appended below.
> >>
> >> I had thought that the line
> >> sysctl table check failed: /sunrpc/transports .7249.14 Missing strategy
> >> meant that the fix referenced in http://lkml.org/lkml/2007/10/11/48
> >> would fix it, but it appeared to have no effect.
> >
> > This is the vmlinux.lds.S problem. The cleanup patch from Sam Ravnborg
> > moved the __initramfs_start and __initramfs_end symbols into
> > the .init.ramfs section. This is in itself not a problem, but it
> > surfaced a bug: there is no *(.init.initramfs), that needs to be
> > *(init.ramfs). I corrected this in the upstream patch but 2.6.23-mm1 has
> > the older one that still causes the "Cannot open root device". For
> > 2.6.23-mm1 use the patch below.
> >
>
> thanks martin,
>
> that helped going a little further in the boot process but we then have
> a network issue when bringing the network interface up :
please cc netdev on network issues.
> Bringing up interface eth0: ------------Ý cut here ¨------------
> Kernel BUG at 0000000000000002 Ýverbose debug info unavailable¨
> illegal operation: 0001 Ý#1¨
> Modules linked in:
> CPU: 0 Not tainted
> Process ip (pid: 1167, task: 0000000001d46038, ksp: 00000000025efb28)
> Krnl PSW : 0704200180000000 0000000000000002 (0x2)
> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
> Krnl GPRS: 0000000000000000 0000000000000000 000000000241f600 0000000001c8d
> 00000000000086dd 0000000001eb6d70 0000000000000000 0000000001c8d
> 0000000001eb6d40 00000000003abc28 0000000001eb6d00 00000000025ef
> 000000000241f600 00000000003b6d18 00000000002b33d2 00000000025ef
> Krnl Code:>0000000000000002: 0000 unknown
> 0000000000000004: 0000 unknown
> 0000000000000006: 0000 unknown
> 0000000000000008: 0000 unknown
> 000000000000000a: 0000 unknown
> 000000000000000c: 0000 unknown
> 000000000000000e: 0000 unknown
> 0000000000000010: 0000 unknown
> Call Trace:
> (Ý<00000000002b3352>¨ neigh_connected_output+0x76/0x138)
> Ý<0000000000325402>¨ ip6_output2+0x2da/0x470
> Ý<0000000000326ea6>¨ ip6_output+0x816/0x1064
> Ý<0000000000338e46>¨ __ndisc_send+0x416/0x6a8
> Ý<0000000000339330>¨ ndisc_send_rs+0x58/0x68
> Ý<000000000032cbf4>¨ addrconf_dad_completed+0xbc/0x100
> Ý<000000000032d2de>¨ addrconf_dad_start+0xa2/0x14c
> Ý<000000000032d408>¨ addrconf_add_linklocal+0x80/0xa8
> Ý<000000000032fa7e>¨ addrconf_notify+0x2de/0x8d4
> Ý<0000000000383990>¨ notifier_call_chain+0x5c/0x98
> Ý<0000000000063bca>¨ __raw_notifier_call_chain+0x26/0x34
> Ý<0000000000063c06>¨ raw_notifier_call_chain+0x2e/0x3c
> Ý<00000000002aa54c>¨ call_netdevice_notifiers+0x34/0x44
> Ý<00000000002ad1aa>¨ dev_open+0x9e/0xe0
> Ý<00000000002ad80a>¨ dev_change_flags+0x9e/0x1cc
> Ý<0000000000302c74>¨ devinet_ioctl+0x650/0x73c
> Ý<00000000003050ba>¨ inet_ioctl+0xde/0xf4
> Ý<000000000029a8d0>¨ sock_ioctl+0x1cc/0x2dc
> Ý<00000000000cb844>¨ do_ioctl+0xb8/0xcc
> Ý<00000000000cb8f2>¨ vfs_ioctl+0x9a/0x3ec
> Ý<00000000000cbc96>¨ sys_ioctl+0x52/0x7c
> Ý<0000000000022484>¨ sysc_noemu+0x10/0x16
> Ý<000002000010df12>¨ 0x2000010df12
that's a network issue ;)
> 00000000002b3352 gives : include/linux/netdevice.h:819
>
I have a feeling that we fixed this. But there's no BUG at 2.6.23-mm1's
include/linux/netdevice.h:819. How about setting
CONFIG_DEBUG_BUGVERBOSE=y?
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Morton <akpm@linux-foundation.org>
To: Cedric Le Goater <clg@fr.ibm.com>
Cc: schwidefsky@de.ibm.com, "Serge E. Hallyn" <serge@hallyn.com>,
Christian Borntraeger <borntraeger@de.ibm.com>,
linux-kernel@vger.kernel.org, cornelia.huck@de.ibm.com,
heiko.carstens@de.ibm.com, sam@ravnborg.org,
Linux Containers <containers@lists.osdl.org>,
netdev@vger.kernel.org
Subject: Re: 2.6.23-mm1 s390 driver problem
Date: Fri, 19 Oct 2007 02:27:19 -0700 [thread overview]
Message-ID: <20071019022719.537ee71f.akpm@linux-foundation.org> (raw)
In-Reply-To: <471875E0.8040308@fr.ibm.com>
On Fri, 19 Oct 2007 11:16:16 +0200 Cedric Le Goater <clg@fr.ibm.com> wrote:
> Martin Schwidefsky wrote:
> > On Thu, 2007-10-18 at 15:31 -0500, Serge E. Hallyn wrote:
> >> Quoting Christian Borntraeger (borntraeger@de.ibm.com):
> >>> Am Donnerstag, 18. Oktober 2007 schrieb Serge E. Hallyn:
> >>>> Sigh, well this turned out less informative than I'd liked.
> >>>> After bisecting 2.6.23 to 2.6.23-mm1, I found that
> >>>> git-s390.patch is the one breaking my s390 boot :(
> >>>> (Frown bc it's a conglomeration of patches0
> >>>>
> >>>> Symptom is:
> >>>> "Cannot open root device "dasdd2" or unknown-block(94,14)"
> >>>> even though dasdd2 appeared to be found earlier in the boot. I also
> >>>> get
> >>> Can you post the full console output from IPL to the unsuccessful end?
> >> Yeah, sorry, appended below.
> >>
> >> I had thought that the line
> >> sysctl table check failed: /sunrpc/transports .7249.14 Missing strategy
> >> meant that the fix referenced in http://lkml.org/lkml/2007/10/11/48
> >> would fix it, but it appeared to have no effect.
> >
> > This is the vmlinux.lds.S problem. The cleanup patch from Sam Ravnborg
> > moved the __initramfs_start and __initramfs_end symbols into
> > the .init.ramfs section. This is in itself not a problem, but it
> > surfaced a bug: there is no *(.init.initramfs), that needs to be
> > *(init.ramfs). I corrected this in the upstream patch but 2.6.23-mm1 has
> > the older one that still causes the "Cannot open root device". For
> > 2.6.23-mm1 use the patch below.
> >
>
> thanks martin,
>
> that helped going a little further in the boot process but we then have
> a network issue when bringing the network interface up :
please cc netdev on network issues.
> Bringing up interface eth0: ------------Ý cut here ¨------------
> Kernel BUG at 0000000000000002 Ýverbose debug info unavailable¨
> illegal operation: 0001 Ý#1¨
> Modules linked in:
> CPU: 0 Not tainted
> Process ip (pid: 1167, task: 0000000001d46038, ksp: 00000000025efb28)
> Krnl PSW : 0704200180000000 0000000000000002 (0x2)
> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
> Krnl GPRS: 0000000000000000 0000000000000000 000000000241f600 0000000001c8d
> 00000000000086dd 0000000001eb6d70 0000000000000000 0000000001c8d
> 0000000001eb6d40 00000000003abc28 0000000001eb6d00 00000000025ef
> 000000000241f600 00000000003b6d18 00000000002b33d2 00000000025ef
> Krnl Code:>0000000000000002: 0000 unknown
> 0000000000000004: 0000 unknown
> 0000000000000006: 0000 unknown
> 0000000000000008: 0000 unknown
> 000000000000000a: 0000 unknown
> 000000000000000c: 0000 unknown
> 000000000000000e: 0000 unknown
> 0000000000000010: 0000 unknown
> Call Trace:
> (Ý<00000000002b3352>¨ neigh_connected_output+0x76/0x138)
> Ý<0000000000325402>¨ ip6_output2+0x2da/0x470
> Ý<0000000000326ea6>¨ ip6_output+0x816/0x1064
> Ý<0000000000338e46>¨ __ndisc_send+0x416/0x6a8
> Ý<0000000000339330>¨ ndisc_send_rs+0x58/0x68
> Ý<000000000032cbf4>¨ addrconf_dad_completed+0xbc/0x100
> Ý<000000000032d2de>¨ addrconf_dad_start+0xa2/0x14c
> Ý<000000000032d408>¨ addrconf_add_linklocal+0x80/0xa8
> Ý<000000000032fa7e>¨ addrconf_notify+0x2de/0x8d4
> Ý<0000000000383990>¨ notifier_call_chain+0x5c/0x98
> Ý<0000000000063bca>¨ __raw_notifier_call_chain+0x26/0x34
> Ý<0000000000063c06>¨ raw_notifier_call_chain+0x2e/0x3c
> Ý<00000000002aa54c>¨ call_netdevice_notifiers+0x34/0x44
> Ý<00000000002ad1aa>¨ dev_open+0x9e/0xe0
> Ý<00000000002ad80a>¨ dev_change_flags+0x9e/0x1cc
> Ý<0000000000302c74>¨ devinet_ioctl+0x650/0x73c
> Ý<00000000003050ba>¨ inet_ioctl+0xde/0xf4
> Ý<000000000029a8d0>¨ sock_ioctl+0x1cc/0x2dc
> Ý<00000000000cb844>¨ do_ioctl+0xb8/0xcc
> Ý<00000000000cb8f2>¨ vfs_ioctl+0x9a/0x3ec
> Ý<00000000000cbc96>¨ sys_ioctl+0x52/0x7c
> Ý<0000000000022484>¨ sysc_noemu+0x10/0x16
> Ý<000002000010df12>¨ 0x2000010df12
that's a network issue ;)
> 00000000002b3352 gives : include/linux/netdevice.h:819
>
I have a feeling that we fixed this. But there's no BUG at 2.6.23-mm1's
include/linux/netdevice.h:819. How about setting
CONFIG_DEBUG_BUGVERBOSE=y?
next prev parent reply other threads:[~2007-10-19 9:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-18 20:01 2.6.23-mm1 s390 driver problem Serge E. Hallyn
2007-10-18 20:15 ` Christian Borntraeger
2007-10-18 20:31 ` Serge E. Hallyn
2007-10-19 7:47 ` Martin Schwidefsky
2007-10-19 9:16 ` Cedric Le Goater
2007-10-19 9:20 ` Martin Schwidefsky
2007-10-19 11:06 ` Cedric Le Goater
2007-10-19 11:06 ` Cedric Le Goater
[not found] ` <471875E0.8040308-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org>
2007-10-19 9:27 ` Andrew Morton [this message]
2007-10-19 9:27 ` Andrew Morton
[not found] ` <20071019022719.537ee71f.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2007-10-19 11:17 ` Cedric Le Goater
2007-10-19 11:17 ` Cedric Le Goater
2007-10-19 11:25 ` Martin Schwidefsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071019022719.537ee71f.akpm@linux-foundation.org \
--to=akpm-de/tnxtf+jlsfhdxvbkv3wd2fqjk+8+b@public.gmane.org \
--cc=Christian-YRGon0hq2jhQetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=borntraeger-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org \
--cc=clg-NmTC/0ZBporQT0dZR+AlfA@public.gmane.org \
--cc=containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org \
--cc=cornelia.huck-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org \
--cc=heiko.carstens-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sam-uyr5N9Q2VtJg9hUCZPvPmw@public.gmane.org \
--cc=schwidefsky-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org \
--cc=serge-A9i7LUbDfNHQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.