From: Anton Vorontsov <cbou@mail.ru>
To: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: linuxppc-dev@ozlabs.org, netdev@vger.kernel.org,
leoli@freescale.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ucc_geth: add support for netpoll
Date: Sat, 27 Oct 2007 18:37:31 +0400 [thread overview]
Message-ID: <20071027143731.GA2616@zarina> (raw)
In-Reply-To: <4723389F.7010109@ru.mvista.com>
On Sat, Oct 27, 2007 at 05:09:51PM +0400, Sergei Shtylyov wrote:
> Hello.
>
> Anton Vorontsov wrote:
>
> > This patch adds netpoll support for the QE UCC Gigabit Ethernet
> > driver. The approach is very similar to the gianfar driver.
>
> It's rather contrarywise -- this is standard approach and gianfar with its
> 3 TSEC IRQs has a quite non-standard poll_controller() implementation.
Oh.. well, right -- gianfar a bit more comlex in that regard.
>
> > Tested using netconsole.
>
> KGDBoE is considered a better test (I hope you've also tested with it).
At the time of posting it was tested using netconsole only, a few
days later it's was tested using KGDBoE also. So, it works indeed.
> > Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> > diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
> > index 18a6f48..06807ce 100644
> > --- a/drivers/net/ucc_geth.c
> > +++ b/drivers/net/ucc_geth.c
> > @@ -3691,6 +3691,22 @@ static irqreturn_t ucc_geth_irq_handler(int irq, void *info)
> > return IRQ_HANDLED;
> > }
> >
> > +#ifdef CONFIG_NET_POLL_CONTROLLER
> > +/*
> > + * Polling 'interrupt' - used by things like netconsole to send skbs
> > + * without having to re-enable interrupts. It's not called while
> > + * the interrupt routine is executing.
> > + */
> > +static void ucc_netpoll(struct net_device *dev)
> > +{
> > + struct ucc_geth_private *ugeth = netdev_priv(dev);
> > +
> > + disable_irq(ugeth->ug_info->uf_info.irq);
> > + ucc_geth_irq_handler(ugeth->ug_info->uf_info.irq, dev);
> > + enable_irq(ugeth->ug_info->uf_info.irq);
>
> Why not make it less complex (for a reader and gcc too :-) ?
Yup, I'm agree here but it's too late. Again. ;-)
This patch already accepted into the -mm (a week or so after the
silence), so.. now I'd rather not bother Andrew with such really
cosmetic changes. But if Jeff would directly apply modfied patch,
I'll send it. ;-)
Anyhow, I'm sincerely appreciate your comments.
Thanks,
--
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <cbou@mail.ru>
To: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>,
netdev@vger.kernel.org, leoli@freescale.com,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] ucc_geth: add support for netpoll
Date: Sat, 27 Oct 2007 18:37:31 +0400 [thread overview]
Message-ID: <20071027143731.GA2616@zarina> (raw)
In-Reply-To: <4723389F.7010109@ru.mvista.com>
On Sat, Oct 27, 2007 at 05:09:51PM +0400, Sergei Shtylyov wrote:
> Hello.
>
> Anton Vorontsov wrote:
>
> > This patch adds netpoll support for the QE UCC Gigabit Ethernet
> > driver. The approach is very similar to the gianfar driver.
>
> It's rather contrarywise -- this is standard approach and gianfar with its
> 3 TSEC IRQs has a quite non-standard poll_controller() implementation.
Oh.. well, right -- gianfar a bit more comlex in that regard.
>
> > Tested using netconsole.
>
> KGDBoE is considered a better test (I hope you've also tested with it).
At the time of posting it was tested using netconsole only, a few
days later it's was tested using KGDBoE also. So, it works indeed.
> > Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> > diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
> > index 18a6f48..06807ce 100644
> > --- a/drivers/net/ucc_geth.c
> > +++ b/drivers/net/ucc_geth.c
> > @@ -3691,6 +3691,22 @@ static irqreturn_t ucc_geth_irq_handler(int irq, void *info)
> > return IRQ_HANDLED;
> > }
> >
> > +#ifdef CONFIG_NET_POLL_CONTROLLER
> > +/*
> > + * Polling 'interrupt' - used by things like netconsole to send skbs
> > + * without having to re-enable interrupts. It's not called while
> > + * the interrupt routine is executing.
> > + */
> > +static void ucc_netpoll(struct net_device *dev)
> > +{
> > + struct ucc_geth_private *ugeth = netdev_priv(dev);
> > +
> > + disable_irq(ugeth->ug_info->uf_info.irq);
> > + ucc_geth_irq_handler(ugeth->ug_info->uf_info.irq, dev);
> > + enable_irq(ugeth->ug_info->uf_info.irq);
>
> Why not make it less complex (for a reader and gcc too :-) ?
Yup, I'm agree here but it's too late. Again. ;-)
This patch already accepted into the -mm (a week or so after the
silence), so.. now I'd rather not bother Andrew with such really
cosmetic changes. But if Jeff would directly apply modfied patch,
I'll send it. ;-)
Anyhow, I'm sincerely appreciate your comments.
Thanks,
--
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2
next prev parent reply other threads:[~2007-10-27 14:39 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-11 12:48 [PATCH] ucc_geth: add support for netpoll Anton Vorontsov
2007-10-11 12:48 ` Anton Vorontsov
2007-10-27 13:09 ` Sergei Shtylyov
2007-10-27 13:09 ` Sergei Shtylyov
2007-10-27 14:37 ` Anton Vorontsov [this message]
2007-10-27 14:37 ` Anton Vorontsov
2007-10-29 6:12 ` Li Yang-r58472
2007-10-29 6:12 ` Li Yang-r58472
2007-10-29 12:17 ` Anton Vorontsov
2007-10-29 12:17 ` Anton Vorontsov
2007-10-31 21:59 ` Anton Vorontsov
2007-11-01 2:33 ` Li Yang-r58472
2007-11-01 2:33 ` Li Yang-r58472
2007-11-01 10:05 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071027143731.GA2616@zarina \
--to=cbou@mail.ru \
--cc=leoli@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=sshtylyov@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.