* [PATCH v3 01/13] [POWERPC] Add 'model: ...' line to common show_cpuinfo()
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
@ 2007-11-06 20:04 ` Marian Balakowicz
2007-11-06 20:05 ` [PATCH v3 02/13] [POWERPC] Add 'fsl, lpb' bus type for MPC5200 LocalPlus Bus Marian Balakowicz
` (11 subsequent siblings)
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:04 UTC (permalink / raw)
To: linuxppc-dev
Print out 'model' property of '/' node as a machine name
in generic show_cpuinfo() routine.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Olof Johansson <olof@lixom.net>
---
arch/powerpc/kernel/setup-common.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 2de00f8..cb291f1 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -165,6 +165,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
unsigned short min;
if (cpu_id == NR_CPUS) {
+ struct device_node *root;
+ const char *model = NULL;
#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
unsigned long bogosum = 0;
int i;
@@ -176,6 +178,13 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
if (ppc_md.name)
seq_printf(m, "platform\t: %s\n", ppc_md.name);
+ root = of_find_node_by_path("/");
+ if (root)
+ model = of_get_property(root, "model", NULL);
+ of_node_put(root);
+ if (model)
+ seq_printf(m, "model\t\t: %s\n", model);
+
if (ppc_md.show_cpuinfo != NULL)
ppc_md.show_cpuinfo(m);
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 02/13] [POWERPC] Add 'fsl, lpb' bus type for MPC5200 LocalPlus Bus
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
2007-11-06 20:04 ` [PATCH v3 01/13] [POWERPC] Add 'model: ...' line to common show_cpuinfo() Marian Balakowicz
@ 2007-11-06 20:05 ` Marian Balakowicz
2007-11-06 20:05 ` [PATCH v3 03/13] [POWERPC] Add common mpc52xx_setup_pci() routine Marian Balakowicz
` (10 subsequent siblings)
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:05 UTC (permalink / raw)
To: linuxppc-dev
Define MPC52xx specific device id list, add new
'fsl,lpb' compatible id for LocalPlus Bus.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
---
arch/powerpc/platforms/52xx/mpc52xx_common.c | 9 ++++++++-
1 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 9850685..2df97c5 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -124,11 +124,18 @@ mpc5200_setup_xlb_arbiter(void)
iounmap(xlb);
}
+static struct of_device_id mpc52xx_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "fsl,lpb", },
+ {},
+};
+
void __init
mpc52xx_declare_of_platform_devices(void)
{
/* Find every child of the SOC node and add it to of_platform */
- if (of_platform_bus_probe(NULL, NULL, NULL))
+ if (of_platform_bus_probe(NULL, mpc52xx_ids, NULL))
printk(KERN_ERR __FILE__ ": "
"Error while probing of_platform bus\n");
}
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 03/13] [POWERPC] Add common mpc52xx_setup_pci() routine
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
2007-11-06 20:04 ` [PATCH v3 01/13] [POWERPC] Add 'model: ...' line to common show_cpuinfo() Marian Balakowicz
2007-11-06 20:05 ` [PATCH v3 02/13] [POWERPC] Add 'fsl, lpb' bus type for MPC5200 LocalPlus Bus Marian Balakowicz
@ 2007-11-06 20:05 ` Marian Balakowicz
2007-11-06 20:05 ` [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards Marian Balakowicz
` (9 subsequent siblings)
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:05 UTC (permalink / raw)
To: linuxppc-dev
This patch moves a generic pci init code from lite5200
platform file to a common mpc52xx_setup_pci() routine
and adds additional compatibility property verification.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/platforms/52xx/lite5200.c | 12 +-----------
arch/powerpc/platforms/52xx/mpc52xx_pci.c | 15 +++++++++++++++
include/asm-powerpc/mpc52xx.h | 5 +++++
3 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 25d2bfa..ce903be 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -131,10 +131,6 @@ static void lite5200_resume_finish(void __iomem *mbar)
static void __init lite5200_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("lite5200_setup_arch()", 0);
@@ -154,13 +150,7 @@ static void __init lite5200_setup_arch(void)
lite5200_pm_init();
#endif
-#ifdef CONFIG_PCI
- np = of_find_node_by_type(NULL, "pci");
- if (np) {
- mpc52xx_add_bridge(np);
- of_node_put(np);
- }
-#endif
+ mpc52xx_setup_pci();
}
/*
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 4c6c82a..89304f2 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -406,3 +406,18 @@ mpc52xx_add_bridge(struct device_node *node)
return 0;
}
+
+void __init mpc52xx_setup_pci(void)
+{
+ struct device_node *pci;
+
+ pci = of_find_node_by_type(NULL, "pci");
+ if (!pci)
+ return;
+
+ if (of_device_is_compatible(pci, "fsl,mpc5200-pci") ||
+ of_device_is_compatible(pci, "mpc5200-pci"))
+ mpc52xx_add_bridge(pci);
+
+ of_node_put(pci);
+}
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index fcb2ebb..d7efbe0 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -257,7 +257,12 @@ extern void mpc52xx_declare_of_platform_devices(void);
extern void mpc52xx_init_irq(void);
extern unsigned int mpc52xx_get_irq(void);
+#ifdef CONFIG_PCI
extern int __init mpc52xx_add_bridge(struct device_node *node);
+extern void __init mpc52xx_setup_pci(void);
+#else
+static inline void mpc52xx_setup_pci(void) { }
+#endif
extern void __init mpc52xx_map_wdt(void);
extern void mpc52xx_restart(char *cmd);
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (2 preceding siblings ...)
2007-11-06 20:05 ` [PATCH v3 03/13] [POWERPC] Add common mpc52xx_setup_pci() routine Marian Balakowicz
@ 2007-11-06 20:05 ` Marian Balakowicz
2007-11-06 21:04 ` Grant Likely
2007-11-07 2:34 ` Stephen Rothwell
2007-11-06 20:05 ` [PATCH v3 05/13] [POWERPC] Export mpc52xx_map_node() routine symbol Marian Balakowicz
` (8 subsequent siblings)
12 siblings, 2 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:05 UTC (permalink / raw)
To: linuxppc-dev
This patch adds support for 'mpc5200-simple-platform' compatible
boards which do not need a platform specific setup. Such boards
are supported assuming the following:
- GPIO pins are configured by the firmware,
- CDM configuration (clocking) is setup correctly by firmware,
- if the 'fsl,has-wdt' property is present in one of the
gpt nodes, then it is safe to use such gpt to reset the board,
- PCI is supported if enabled in the kernel configuration
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/boot/dts/lite5200.dts | 2 -
arch/powerpc/boot/dts/lite5200b.dts | 2 -
arch/powerpc/platforms/52xx/Kconfig | 18 ++++++-
arch/powerpc/platforms/52xx/Makefile | 1
arch/powerpc/platforms/52xx/mpc5200_simple.c | 72 ++++++++++++++++++++++++++
5 files changed, 91 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/platforms/52xx/mpc5200_simple.c
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 6731763..5902362 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -19,7 +19,7 @@
/ {
model = "fsl,lite5200";
// revision = "1.0";
- compatible = "fsl,lite5200","generic-mpc5200";
+ compatible = "fsl,lite5200";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index b540388..b509129 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -19,7 +19,7 @@
/ {
model = "fsl,lite5200b";
// revision = "1.0";
- compatible = "fsl,lite5200b","generic-mpc5200";
+ compatible = "fsl,lite5200b";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 2938d49..b8a6ebc 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -19,6 +19,22 @@ config PPC_MPC5200_BUGFIX
It is safe to say 'Y' here
+config PPC_MPC5200_SIMPLE
+ bool "Generic support for simple MPC5200 based boards"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_MPC5200
+ default n
+ help
+ This option enables support for a simple MPC52xx based boards which
+ do not need a custom platform specific setup. Such boards are
+ supported assuming the following:
+
+ - GPIO pins are configured by the firmware,
+ - CDM configuration (clocking) is setup correctly by firmware,
+ - if the 'fsl,has-wdt' property is present in one of the
+ gpt nodes, then it is safe to use such gpt to reset the board,
+ - PCI is supported if enabled in the kernel configuration
+
config PPC_EFIKA
bool "bPlan Efika 5k2. MPC5200B based computer"
depends on PPC_MULTIPLATFORM && PPC32
@@ -34,5 +50,3 @@ config PPC_LITE5200
select WANT_DEVICE_TREE
select PPC_MPC5200
default n
-
-
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index 307dbc1..fe1b81b 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -6,6 +6,7 @@ obj-y += mpc52xx_pic.o mpc52xx_common.o
obj-$(CONFIG_PCI) += mpc52xx_pci.o
endif
+obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o
obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
new file mode 100644
index 0000000..618cf24
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -0,0 +1,72 @@
+/*
+ * Support for 'mpc5200-simple-platform' compatible boards.
+ *
+ * Written by Marian Balakowicz <m8@semihalf.com>
+ * Copyright (C) 2007 Semihalf
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Description:
+ * This code implements support for a simple MPC52xx based boards which
+ * do not need a custom platform specific setup. Such boards are
+ * supported assuming the following:
+ *
+ * - GPIO pins are configured by the firmware,
+ * - CDM configuration (clocking) is setup correctly by firmware,
+ * - if the 'fsl,has-wdt' property is present in one of the
+ * gpt nodes, then it is safe to use such gpt to reset the board,
+ * - PCI is supported if enabled in the kernel configuration
+ */
+
+#undef DEBUG
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/mpc52xx.h>
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc5200_simple_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc5200_simple_setup_arch()", 0);
+
+ /* Some mpc5200 & mpc5200b related configuration */
+ mpc5200_setup_xlb_arbiter();
+
+ /* Map wdt for mpc52xx_restart() */
+ mpc52xx_map_wdt();
+
+ mpc52xx_setup_pci();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5200_simple_probe(void)
+{
+ unsigned long node = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(node, "mpc5200-simple-platform"))
+ return 0;
+ return 1;
+}
+
+define_machine(mpc5200_simple_platform) {
+ .name = "mpc5200-simple-platform",
+ .probe = mpc5200_simple_probe,
+ .setup_arch = mpc5200_simple_setup_arch,
+ .init = mpc52xx_declare_of_platform_devices,
+ .init_IRQ = mpc52xx_init_irq,
+ .get_irq = mpc52xx_get_irq,
+ .restart = mpc52xx_restart,
+ .calibrate_decr = generic_calibrate_decr,
+};
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards
2007-11-06 20:05 ` [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards Marian Balakowicz
@ 2007-11-06 21:04 ` Grant Likely
2007-11-06 22:22 ` Wolfgang Denk
2007-11-07 2:34 ` Stephen Rothwell
1 sibling, 1 reply; 26+ messages in thread
From: Grant Likely @ 2007-11-06 21:04 UTC (permalink / raw)
To: Marian Balakowicz; +Cc: linuxppc-dev
On 11/6/07, Marian Balakowicz <m8@semihalf.com> wrote:
> This patch adds support for 'mpc5200-simple-platform' compatible
> boards which do not need a platform specific setup. Such boards
> are supported assuming the following:
>
> - GPIO pins are configured by the firmware,
> - CDM configuration (clocking) is setup correctly by firmware,
> - if the 'fsl,has-wdt' property is present in one of the
> gpt nodes, then it is safe to use such gpt to reset the board,
> - PCI is supported if enabled in the kernel configuration
>
> Signed-off-by: Marian Balakowicz <m8@semihalf.com>
> ---
>
> arch/powerpc/boot/dts/lite5200.dts | 2 -
> arch/powerpc/boot/dts/lite5200b.dts | 2 -
> arch/powerpc/platforms/52xx/Kconfig | 18 ++++++-
> arch/powerpc/platforms/52xx/Makefile | 1
> arch/powerpc/platforms/52xx/mpc5200_simple.c | 72 ++++++++++++++++++++++++++
> 5 files changed, 91 insertions(+), 4 deletions(-)
> create mode 100644 arch/powerpc/platforms/52xx/mpc5200_simple.c
>
>
> diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
> index 6731763..5902362 100644
> --- a/arch/powerpc/boot/dts/lite5200.dts
> +++ b/arch/powerpc/boot/dts/lite5200.dts
> @@ -19,7 +19,7 @@
> / {
> model = "fsl,lite5200";
> // revision = "1.0";
> - compatible = "fsl,lite5200","generic-mpc5200";
> + compatible = "fsl,lite5200";
> #address-cells = <1>;
> #size-cells = <1>;
>
> diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
> index b540388..b509129 100644
> --- a/arch/powerpc/boot/dts/lite5200b.dts
> +++ b/arch/powerpc/boot/dts/lite5200b.dts
> @@ -19,7 +19,7 @@
> / {
> model = "fsl,lite5200b";
> // revision = "1.0";
> - compatible = "fsl,lite5200b","generic-mpc5200";
> + compatible = "fsl,lite5200b";
> #address-cells = <1>;
> #size-cells = <1>;
>
> diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
> index 2938d49..b8a6ebc 100644
> --- a/arch/powerpc/platforms/52xx/Kconfig
> +++ b/arch/powerpc/platforms/52xx/Kconfig
> @@ -19,6 +19,22 @@ config PPC_MPC5200_BUGFIX
>
> It is safe to say 'Y' here
>
> +config PPC_MPC5200_SIMPLE
> + bool "Generic support for simple MPC5200 based boards"
> + depends on PPC_MULTIPLATFORM && PPC32
> + select PPC_MPC5200
> + default n
> + help
> + This option enables support for a simple MPC52xx based boards which
> + do not need a custom platform specific setup. Such boards are
> + supported assuming the following:
> +
> + - GPIO pins are configured by the firmware,
> + - CDM configuration (clocking) is setup correctly by firmware,
> + - if the 'fsl,has-wdt' property is present in one of the
> + gpt nodes, then it is safe to use such gpt to reset the board,
> + - PCI is supported if enabled in the kernel configuration
... and there is a PCI bus node in the device tree.
I'd also add a list of the known boards that behave like this.
> +/*
> + * Called very early, MMU is off, device-tree isn't unflattened
> + */
> +static int __init mpc5200_simple_probe(void)
> +{
> + unsigned long node = of_get_flat_dt_root();
> +
> + if (!of_flat_dt_is_compatible(node, "mpc5200-simple-platform"))
> + return 0;
> + return 1;
> +}
I've thought some more about this, and I no longer think that this is
the best approach. I think having the mpc5200 simple platform is a
good thing, but I don't think we should have the device tree claim
compatibility with "mpc5200-simple-platform"
Trying to define exactly what "mpc5200-simple-platform" describes here
and now is probably over ambitious and there is the tendency to want
it change it's meaning over time. (just like with the compatible
field in device nodes; better to stick with real devices and not start
making stuff up).
Instead, I think we should drop "mpc5200-simple-platform" from the
device trees themselves and instead make mpc5200_simple_platform()
loop over a list of known boards that work with the simple 5200
platform.
In other words; make the assumption that it is easier to change the
kernel than it is to change the device tree.
So, do something like this:
static int __init mpc5200_simple_probe(void)
{
const char *board[] = { "promess,motionpro", "schindler,cm5200",
"tqc,tqm5200",
NULL };
int i = 0;
while (board[i]) {
if (of_flat_dt_is_compatible(node, board[i]))
break;
i++;
}
return (board[i] != NULL);
}
Cheers,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards
2007-11-06 21:04 ` Grant Likely
@ 2007-11-06 22:22 ` Wolfgang Denk
2007-11-06 23:25 ` Grant Likely
0 siblings, 1 reply; 26+ messages in thread
From: Wolfgang Denk @ 2007-11-06 22:22 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev, Marian Balakowicz
Dear Grant,
in message <fa686aa40711061304k4779d01cu7fd1b17d1d34e5a2@mail.gmail.com> you wrote:
>
> In other words; make the assumption that it is easier to change the
> kernel than it is to change the device tree.
Are you serious about this?
Reading this from someone with your experience with device trees if
feeding my worst fears...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"Text processing has made it possible to right-justify any idea, even
one which cannot be justified on any other grounds."
-- J. Finnegan, USC.
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards
2007-11-06 22:22 ` Wolfgang Denk
@ 2007-11-06 23:25 ` Grant Likely
2007-11-09 14:43 ` Marian Balakowicz
0 siblings, 1 reply; 26+ messages in thread
From: Grant Likely @ 2007-11-06 23:25 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Marian Balakowicz
On 11/6/07, Wolfgang Denk <wd@denx.de> wrote:
> Dear Grant,
>
> in message <fa686aa40711061304k4779d01cu7fd1b17d1d34e5a2@mail.gmail.com> you wrote:
> >
> > In other words; make the assumption that it is easier to change the
> > kernel than it is to change the device tree.
>
> Are you serious about this?
>
> Reading this from someone with your experience with device trees if
> feeding my worst fears...
I think I better clarify.
Once a device tree is written and shipped on a deployed board, it may
never change again. Or, the kernel version may be updated more
frequently than the device tree.
Say, for example, that in kernel 2.6.25 tqm5200 and cm5200 are both
handled by the same platform code. And lets say that in 2.6.26 we
decide that they really need to have separate platform code (perhaps
due to a firmware bug that needs to be worked around on one board).
In this case, "mpc5200-simple-platform" has suddenly become useless.
Or, does mpc5200-simple-platform now describe the cm5200 or the
tqm5200? (an assumption which cannot be made due to deployed boards
of both types claiming "mpc5200-simple-platform").
Trying to claim "compatible" at the board level is far more difficult
than claiming it at the device level.
Segher suggested on IRC: "for boards it is pretty much useless most of
the time, i think -- use "model" instead"
Cheers,
g.
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
> "Text processing has made it possible to right-justify any idea, even
> one which cannot be justified on any other grounds."
> -- J. Finnegan, USC.
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards
2007-11-06 23:25 ` Grant Likely
@ 2007-11-09 14:43 ` Marian Balakowicz
2007-11-09 14:52 ` Grant Likely
0 siblings, 1 reply; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-09 14:43 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
Hi Grant,
Grant Likely wrote:
> On 11/6/07, Wolfgang Denk <wd@denx.de> wrote:
>>
>> in message <fa686aa40711061304k4779d01cu7fd1b17d1d34e5a2@mail.gmail.com> you wrote:
>>> In other words; make the assumption that it is easier to change the
>>> kernel than it is to change the device tree.
>> Are you serious about this?
>>
>> Reading this from someone with your experience with device trees if
>> feeding my worst fears...
>
> I think I better clarify.
>
> Once a device tree is written and shipped on a deployed board, it may
> never change again. Or, the kernel version may be updated more
> frequently than the device tree.
>
> Say, for example, that in kernel 2.6.25 tqm5200 and cm5200 are both
> handled by the same platform code. And lets say that in 2.6.26 we
> decide that they really need to have separate platform code (perhaps
> due to a firmware bug that needs to be worked around on one board).
> In this case, "mpc5200-simple-platform" has suddenly become useless.
> Or, does mpc5200-simple-platform now describe the cm5200 or the
> tqm5200? (an assumption which cannot be made due to deployed boards
> of both types claiming "mpc5200-simple-platform").
>
> Trying to claim "compatible" at the board level is far more difficult
> than claiming it at the device level.
>
> Segher suggested on IRC: "for boards it is pretty much useless most of
> the time, i think -- use "model" instead"
I can imagine that we may get into various trouble (or at least the
situation is less flexible) if we are unable to update .dts file along
with the kernel image on a deployed board. If so, then in fact there
is little sens in using "mpc5200-simple-platform" compatible.
But how serious is that, does such situation frequently happen in
field? If we are able to update kernel image than what prevents .dts
file update?
Cheers,
m.
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards
2007-11-09 14:43 ` Marian Balakowicz
@ 2007-11-09 14:52 ` Grant Likely
0 siblings, 0 replies; 26+ messages in thread
From: Grant Likely @ 2007-11-09 14:52 UTC (permalink / raw)
To: Marian Balakowicz; +Cc: linuxppc-dev
On 11/9/07, Marian Balakowicz <m8@semihalf.com> wrote:
> I can imagine that we may get into various trouble (or at least the
> situation is less flexible) if we are unable to update .dts file along
> with the kernel image on a deployed board. If so, then in fact there
> is little sens in using "mpc5200-simple-platform" compatible.
>
> But how serious is that, does such situation frequently happen in
> field? If we are able to update kernel image than what prevents .dts
> file update?
Not everything in the device tree is in the .dts file. U-boot or
other firmware can modify the device tree before passing it to the
kernel. It may not always be possible to update the device tree
without also updating the firmware. I already know of changes that
I'd like to make to the lite5200 tree which I know will break u-boot.
That isn't the situation in this particular case, but we must always
keep it in mind.
Cheers,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards
2007-11-06 20:05 ` [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards Marian Balakowicz
2007-11-06 21:04 ` Grant Likely
@ 2007-11-07 2:34 ` Stephen Rothwell
2007-11-09 14:11 ` Marian Balakowicz
1 sibling, 1 reply; 26+ messages in thread
From: Stephen Rothwell @ 2007-11-07 2:34 UTC (permalink / raw)
To: Marian Balakowicz; +Cc: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 436 bytes --]
Hi Marian,
On Tue, 06 Nov 2007 21:05:20 +0100 Marian Balakowicz <m8@semihalf.com> wrote:
>
> +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
> +
> +#include <linux/pci.h>
> +#include <linux/of.h>
> +#include <asm/time.h>
> +#include <asm/io.h>
Its not clear to me that you need any of the above four includes.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards
2007-11-07 2:34 ` Stephen Rothwell
@ 2007-11-09 14:11 ` Marian Balakowicz
0 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-09 14:11 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linuxppc-dev
Hi Stephen,
Stephen Rothwell wrote:
>
> On Tue, 06 Nov 2007 21:05:20 +0100 Marian Balakowicz <m8@semihalf.com> wrote:
>> +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
>> +
>> +#include <linux/pci.h>
>> +#include <linux/of.h>
>> +#include <asm/time.h>
>> +#include <asm/io.h>
>
> Its not clear to me that you need any of the above four includes.
#include <asm/time.h> is needed for generic_calibrate_decr() but other
few includes are in fact not necessary. Thanks.
Cheers,
m.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v3 05/13] [POWERPC] Export mpc52xx_map_node() routine symbol
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (3 preceding siblings ...)
2007-11-06 20:05 ` [PATCH v3 04/13] [POWERPC] Add generic support for simple MPC5200 based boards Marian Balakowicz
@ 2007-11-06 20:05 ` Marian Balakowicz
2007-11-06 20:05 ` [PATCH v3 06/13] [POWERPC] Use EXPORT_SYMBOL_GPL for 52xx common routines symbol export Marian Balakowicz
` (7 subsequent siblings)
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:05 UTC (permalink / raw)
To: linuxppc-dev
Make, so far static, mpc52xx_map_node() routine
symbol available for general use.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/platforms/52xx/mpc52xx_common.c | 3 ++-
include/asm-powerpc/mpc52xx.h | 1 +
2 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 2df97c5..7224bfe 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -26,7 +26,7 @@
*/
static volatile struct mpc52xx_gpt *mpc52xx_wdt = NULL;
-static void __iomem *
+void __iomem *
mpc52xx_map_node(struct device_node *ofn)
{
const u32 *regaddr_p;
@@ -47,6 +47,7 @@ mpc52xx_map_node(struct device_node *ofn)
return ioremap((u32)regaddr64, (u32)size64);
}
+EXPORT_SYMBOL_GPL(mpc52xx_map_node);
void __iomem *
mpc52xx_find_and_map(const char *compatible)
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index d7efbe0..1887b13 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -248,6 +248,7 @@ struct mpc52xx_cdm {
#ifndef __ASSEMBLY__
+extern void __iomem * mpc52xx_map_node(struct device_node *);
extern void __iomem * mpc52xx_find_and_map(const char *);
extern void __iomem * mpc52xx_find_and_map_path(const char *path);
extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 06/13] [POWERPC] Use EXPORT_SYMBOL_GPL for 52xx common routines symbol export
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (4 preceding siblings ...)
2007-11-06 20:05 ` [PATCH v3 05/13] [POWERPC] Export mpc52xx_map_node() routine symbol Marian Balakowicz
@ 2007-11-06 20:05 ` Marian Balakowicz
2007-11-06 20:05 ` [PATCH v3 07/13] [POWERPC] TQM5200 DTS Marian Balakowicz
` (6 subsequent siblings)
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:05 UTC (permalink / raw)
To: linuxppc-dev
Replace EXPORT_SYMBOL with EXPORT_SYMBOL_GPL in mpc52xx_common.c
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/platforms/52xx/mpc52xx_common.c | 8 +++-----
1 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 7224bfe..c9e1ab9 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -55,16 +55,14 @@ mpc52xx_find_and_map(const char *compatible)
return mpc52xx_map_node(
of_find_compatible_node(NULL, NULL, compatible));
}
-
-EXPORT_SYMBOL(mpc52xx_find_and_map);
+EXPORT_SYMBOL_GPL(mpc52xx_find_and_map);
void __iomem *
mpc52xx_find_and_map_path(const char *path)
{
return mpc52xx_map_node(of_find_node_by_path(path));
}
-
-EXPORT_SYMBOL(mpc52xx_find_and_map_path);
+EXPORT_SYMBOL_GPL(mpc52xx_find_and_map_path);
/**
* mpc52xx_find_ipb_freq - Find the IPB bus frequency for a device
@@ -93,7 +91,7 @@ mpc52xx_find_ipb_freq(struct device_node *node)
return p_ipb_freq ? *p_ipb_freq : 0;
}
-EXPORT_SYMBOL(mpc52xx_find_ipb_freq);
+EXPORT_SYMBOL_GPL(mpc52xx_find_ipb_freq);
/*
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 07/13] [POWERPC] TQM5200 DTS
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (5 preceding siblings ...)
2007-11-06 20:05 ` [PATCH v3 06/13] [POWERPC] Use EXPORT_SYMBOL_GPL for 52xx common routines symbol export Marian Balakowicz
@ 2007-11-06 20:05 ` Marian Balakowicz
2007-11-06 22:36 ` David Gibson
2007-11-06 20:05 ` [PATCH v3 08/13] [POWERPC] TQM5200 defconfig Marian Balakowicz
` (5 subsequent siblings)
12 siblings, 1 reply; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:05 UTC (permalink / raw)
To: linuxppc-dev
Add device tree source file for TQM5200 board.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/boot/dts/tqm5200.dts | 185 +++++++++++++++++++++++++++++++++++++
1 files changed, 185 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/tqm5200.dts
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
new file mode 100644
index 0000000..24d5369
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -0,0 +1,185 @@
+/*
+ * TQM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+ model = "tqc,tqm5200";
+ compatible = "tqc,tqm5200","mpc5200-simple-platform";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ model = "fsl,mpc5200";
+ compatible = "fsl,mpc5200";
+ revision = ""; // from bootloader
+ device_type = "soc";
+ ranges = <0 f0000000 0000c000>;
+ reg = <f0000000 00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "mpc5200-cdm";
+ reg = <200 38>;
+ };
+
+ mpc5200_pic: pic@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "mpc5200-pic";
+ reg = <500 80>;
+ };
+
+ gpt@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200-gpt";
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,has-wdt;
+ };
+
+ gpio@b00 {
+ compatible = "mpc5200-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ usb@1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200-ohci","ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ dma-controller@1200 {
+ compatible = "mpc5200-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ xlb@1f00 {
+ compatible = "mpc5200-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial@2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <0>; // Logical port assignment
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2200 { // PSC2
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <1>; // Logical port assignment
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2400 { // PSC3
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <2>; // Logical port assignment
+ reg = <2400 100>;
+ interrupts = <2 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "mpc5200-fec";
+ reg = <3000 800>;
+ local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+ interrupts = <2 5 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ata@3a00 {
+ compatible = "mpc5200-ata";
+ reg = <3a00 100>;
+ interrupts = <2 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i2c@3d40 {
+ compatible = "mpc5200-i2c","fsl-i2c";
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ };
+
+ sram@8000 {
+ compatible = "mpc5200-sram";
+ reg = <8000 4000>;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200-pci";
+ reg = <f0000d00 100>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
+ c000 0 0 2 &mpc5200_pic 0 0 3
+ c000 0 0 3 &mpc5200_pic 0 0 3
+ c000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 10000000
+ 02000000 0 90000000 90000000 0 10000000
+ 01000000 0 00000000 a0000000 0 01000000>;
+ };
+};
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [PATCH v3 07/13] [POWERPC] TQM5200 DTS
2007-11-06 20:05 ` [PATCH v3 07/13] [POWERPC] TQM5200 DTS Marian Balakowicz
@ 2007-11-06 22:36 ` David Gibson
2007-11-09 14:15 ` Marian Balakowicz
0 siblings, 1 reply; 26+ messages in thread
From: David Gibson @ 2007-11-06 22:36 UTC (permalink / raw)
To: Marian Balakowicz; +Cc: linuxppc-dev
On Tue, Nov 06, 2007 at 09:05:48PM +0100, Marian Balakowicz wrote:
> Add device tree source file for TQM5200 board.
>
> Signed-off-by: Marian Balakowicz <m8@semihalf.com>
[snip]
> + usb@1000 {
> + device_type = "usb-ohci-be";
This device_type is bogus. Remember having a valid device_type is the
exception not the rule. Really the only common device_type values are
"cpu", "memory", "network" and "serial".
> + compatible = "mpc5200-ohci","ohci-be";
> + reg = <1000 ff>;
> + interrupts = <2 6 0>;
> + interrupt-parent = <&mpc5200_pic>;
> + };
> +
> + dma-controller@1200 {
> + compatible = "mpc5200-bestcomm";
> + reg = <1200 80>;
> + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> + 3 4 0 3 5 0 3 6 0 3 7 0
> + 3 8 0 3 9 0 3 a 0 3 b 0
> + 3 c 0 3 d 0 3 e 0 3 f 0>;
> + interrupt-parent = <&mpc5200_pic>;
> + };
> +
> + xlb@1f00 {
> + compatible = "mpc5200-xlb";
> + reg = <1f00 100>;
> + };
> +
> + serial@2000 { // PSC1
> + device_type = "serial";
> + compatible = "mpc5200-psc-uart";
> + port-number = <0>; // Logical port assignment
I know you said this is still needed, but the driver really needs to
be fixed. This is not a proper way of using the device tree for
logical numbering.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 07/13] [POWERPC] TQM5200 DTS
2007-11-06 22:36 ` David Gibson
@ 2007-11-09 14:15 ` Marian Balakowicz
0 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-09 14:15 UTC (permalink / raw)
To: David Gibson; +Cc: linuxppc-dev
David Gibson wrote:
> On Tue, Nov 06, 2007 at 09:05:48PM +0100, Marian Balakowicz wrote:
>> Add device tree source file for TQM5200 board.
> [snip]
>> + usb@1000 {
>> + device_type = "usb-ohci-be";
>
> This device_type is bogus. Remember having a valid device_type is the
> exception not the rule. Really the only common device_type values are
> "cpu", "memory", "network" and "serial".
Ok, rechecked this one, doesn't seem necessary, removed.
>> + serial@2000 { // PSC1
>> + device_type = "serial";
>> + compatible = "mpc5200-psc-uart";
>> + port-number = <0>; // Logical port assignment
>
> I know you said this is still needed, but the driver really needs to
> be fixed. This is not a proper way of using the device tree for
> logical numbering.
True, driver needs fixing, but there are also other boards that use
that driver, and I am not able to test them right now. And, as I
recall Grant mentioned that he's working on straightening this up.
Cheers,
m.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v3 08/13] [POWERPC] TQM5200 defconfig
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (6 preceding siblings ...)
2007-11-06 20:05 ` [PATCH v3 07/13] [POWERPC] TQM5200 DTS Marian Balakowicz
@ 2007-11-06 20:05 ` Marian Balakowicz
2007-11-06 20:06 ` [PATCH v3 09/13] [POWERPC] CM5200 DTS Marian Balakowicz
` (4 subsequent siblings)
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:05 UTC (permalink / raw)
To: linuxppc-dev
Add TQM5200 board defconfig file.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/configs/tqm5200_defconfig | 1306 ++++++++++++++++++++++++++++++++
1 files changed, 1306 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/configs/tqm5200_defconfig
diff --git a/arch/powerpc/configs/tqm5200_defconfig b/arch/powerpc/configs/tqm5200_defconfig
new file mode 100644
index 0000000..53fa968
--- /dev/null
+++ b/arch/powerpc/configs/tqm5200_defconfig
@@ -0,0 +1,1306 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Mon Oct 29 14:01:58 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200=y
+# CONFIG_PPC_MPC5200_BUGFIX is not set
+CONFIG_PPC_MPC5200_SIMPLE=y
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_PPC_BESTCOMM is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_HIBERNATION is not set
+CONFIG_SECCOMP=y
+# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=y
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MPC5200_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_PPC_CLOCK=y
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 09/13] [POWERPC] CM5200 DTS
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (7 preceding siblings ...)
2007-11-06 20:05 ` [PATCH v3 08/13] [POWERPC] TQM5200 defconfig Marian Balakowicz
@ 2007-11-06 20:06 ` Marian Balakowicz
2007-11-06 20:06 ` [PATCH v3 10/13] [POWERPC] CM5200 defconfig Marian Balakowicz
` (3 subsequent siblings)
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:06 UTC (permalink / raw)
To: linuxppc-dev
Add device tree source file for CM5200 board.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/boot/dts/cm5200.dts | 236 ++++++++++++++++++++++++++++++++++++++
1 files changed, 236 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/cm5200.dts
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
new file mode 100644
index 0000000..74e82bf
--- /dev/null
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -0,0 +1,236 @@
+/*
+ * CM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+ model = "schindler,cm5200";
+ compatible = "schindler,cm5200","mpc5200-simple-platform";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ model = "fsl,mpc5200b";
+ compatible = "fsl,mpc5200b";
+ revision = ""; // from bootloader
+ device_type = "soc";
+ ranges = <0 f0000000 0000c000>;
+ reg = <f0000000 00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "mpc5200b-cdm","mpc5200-cdm";
+ reg = <200 38>;
+ };
+
+ mpc5200_pic: pic@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "mpc5200b-pic","mpc5200-pic";
+ reg = <500 80>;
+ };
+
+ gpt@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,has-wdt;
+ };
+
+ gpt@610 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <610 10>;
+ interrupts = <1 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@620 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <620 10>;
+ interrupts = <1 b 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@630 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <630 10>;
+ interrupts = <1 c 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@640 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <640 10>;
+ interrupts = <1 d 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@650 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <650 10>;
+ interrupts = <1 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@660 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <660 10>;
+ interrupts = <1 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@670 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <670 10>;
+ interrupts = <1 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "mpc5200b-rtc","mpc5200-rtc";
+ reg = <800 100>;
+ interrupts = <1 5 0 1 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpio@b00 {
+ compatible = "mpc5200b-gpio","mpc5200-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpio-wkup@c00 {
+ compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
+ reg = <c00 40>;
+ interrupts = <1 8 0 0 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ spi@f00 {
+ compatible = "mpc5200b-spi","mpc5200-spi";
+ reg = <f00 20>;
+ interrupts = <2 d 0 2 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ usb@1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ dma-controller@1200 {
+ compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ xlb@1f00 {
+ compatible = "mpc5200b-xlb","mpc5200-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial@2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+ port-number = <0>; // Logical port assignment
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2200 { // PSC2
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <1>; // Logical port assignment
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2400 { // PSC3
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <2>; // Logical port assignment
+ reg = <2400 100>;
+ interrupts = <2 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2c00 { // PSC6
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+ port-number = <5>; // Logical port assignment
+ reg = <2c00 100>;
+ interrupts = <2 4 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "mpc5200b-fec","mpc5200-fec";
+ reg = <3000 800>;
+ local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+ interrupts = <2 5 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i2c@3d40 {
+ compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ };
+
+ sram@8000 {
+ compatible = "mpc5200b-sram","mpc5200-sram";
+ reg = <8000 4000>;
+ };
+ };
+};
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 10/13] [POWERPC] CM5200 defconfig
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (8 preceding siblings ...)
2007-11-06 20:06 ` [PATCH v3 09/13] [POWERPC] CM5200 DTS Marian Balakowicz
@ 2007-11-06 20:06 ` Marian Balakowicz
2007-11-06 20:06 ` [PATCH v3 11/13] [POWERPC] Motion-PRO: Add LED support Marian Balakowicz
` (2 subsequent siblings)
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:06 UTC (permalink / raw)
To: linuxppc-dev
Add CM5200 board defconfig file.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/configs/cm5200_defconfig | 1031 +++++++++++++++++++++++++++++++++
1 files changed, 1031 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/configs/cm5200_defconfig
diff --git a/arch/powerpc/configs/cm5200_defconfig b/arch/powerpc/configs/cm5200_defconfig
new file mode 100644
index 0000000..a17d966
--- /dev/null
+++ b/arch/powerpc/configs/cm5200_defconfig
@@ -0,0 +1,1031 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Mon Oct 29 14:06:34 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200=y
+# CONFIG_PPC_MPC5200_BUGFIX is not set
+CONFIG_PPC_MPC5200_SIMPLE=y
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_PPC_BESTCOMM is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_HIBERNATION is not set
+CONFIG_SECCOMP=y
+# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_PPC_CLOCK=y
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 11/13] [POWERPC] Motion-PRO: Add LED support
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (9 preceding siblings ...)
2007-11-06 20:06 ` [PATCH v3 10/13] [POWERPC] CM5200 defconfig Marian Balakowicz
@ 2007-11-06 20:06 ` Marian Balakowicz
2007-11-06 20:06 ` [PATCH v3 12/13] [POWERPC] Promess Motion-PRO DTS Marian Balakowicz
2007-11-06 20:06 ` [PATCH v3 13/13] [POWERPC] Promess Motion-PRO defconfig Marian Balakowicz
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:06 UTC (permalink / raw)
To: linuxppc-dev
Add LED driver for Promess Motion-PRO board.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
drivers/leds/Kconfig | 7 +
drivers/leds/Makefile | 3 -
drivers/leds/leds-motionpro.c | 243 +++++++++++++++++++++++++++++++++++++++++
include/asm-powerpc/mpc52xx.h | 5 +
4 files changed, 257 insertions(+), 1 deletions(-)
create mode 100644 drivers/leds/leds-motionpro.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ec568fa..1567ed6 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -55,6 +55,13 @@ config LEDS_TOSA
This option enables support for the LEDs on Sharp Zaurus
SL-6000 series.
+config LEDS_MOTIONPRO
+ tristate "Motion-PRO LEDs Support"
+ depends on LEDS_CLASS && PPC_MPC5200
+ help
+ This option enables support for status and ready LEDs connected
+ to GPIO lines on Motion-PRO board.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS && ARCH_S3C2410
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index a60de1b..a56d399 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -18,7 +18,8 @@ obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
-obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
+obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
+obj-$(CONFIG_LEDS_MOTIONPRO) += leds-motionpro.o
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
diff --git a/drivers/leds/leds-motionpro.c b/drivers/leds/leds-motionpro.c
new file mode 100644
index 0000000..11b283f
--- /dev/null
+++ b/drivers/leds/leds-motionpro.c
@@ -0,0 +1,243 @@
+/*
+ * LEDs driver for the Motion-PRO board.
+ *
+ * Copyright (C) 2007 Semihalf
+ * Jan Wrobel <wrr@semihalf.com>
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ *
+ * Decription:
+ * This driver enables control over Motion-PRO status and ready LEDs through
+ * sysfs. LEDs can be controlled by writing to sysfs files:
+ * class/leds/<led-name>/(brightness|delay_off|delay_on).
+ * See Documentation/leds-class.txt for more details.
+ * <led-name> is the set to the corresponding GPT node name.
+ *
+ * Before user issues first control command via sysfs, LED blinking is
+ * controlled by the kernel ('blink-delay' property of the GPT node
+ * in the device tree blob).
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/vmalloc.h>
+#include <linux/of_platform.h>
+
+#include <asm/mpc52xx.h>
+#include <asm/io.h>
+
+/* LED control bits */
+#define LED_ON MPC52xx_GPT_OUTPUT_1
+
+/* LED mode */
+#define LED_MODE_KERNEL 1
+#define LED_MODE_USER 2
+
+struct motionpro_led {
+ spinlock_t led_lock; /* Protects the LED data */
+ struct mpc52xx_gpt __iomem *gpt;/* LED registers */
+ struct timer_list blink_timer; /* Used if blink_delay is nonzero */
+ unsigned int blink_delay; /* [ms], if set to 0 blinking is off */
+ unsigned int mode; /* kernel/user */
+ struct led_classdev mpled_cdev; /* LED class */
+};
+
+/*
+ * Timer event - blinks LED before user takes control over it
+ * with the first access via sysfs.
+ */
+static void mpled_timer_toggle(unsigned long data)
+{
+ struct motionpro_led *mpled = (struct motionpro_led *)data;
+
+ spin_lock_bh(&mpled->led_lock);
+ if (mpled->mode == LED_MODE_KERNEL) {
+ u32 val = in_be32(&mpled->gpt->mode);
+ val ^= LED_ON;
+ out_be32(&mpled->gpt->mode, val);
+
+ mod_timer(&mpled->blink_timer,
+ jiffies + msecs_to_jiffies(mpled->blink_delay));
+ }
+ spin_unlock_bh(&mpled->led_lock);
+}
+
+/*
+ * Turn on/off led according to user settings in sysfs.
+ * First call to this function disables kernel blinking.
+ */
+static void mpled_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct motionpro_led *mpled;
+ int old_mode;
+ u32 val;
+
+ mpled = container_of(led_cdev, struct motionpro_led, mpled_cdev);
+
+ spin_lock_bh(&mpled->led_lock);
+ /* disable kernel controll */
+ old_mode = mpled->mode;
+ if (old_mode == LED_MODE_KERNEL)
+ mpled->mode = LED_MODE_USER;
+
+ val = in_be32(&mpled->gpt->mode);
+ if (brightness)
+ val |= LED_ON;
+ else
+ val &= ~LED_ON;
+ out_be32(&mpled->gpt->mode, val);
+ spin_unlock_bh(&mpled->led_lock);
+
+ /* delete kernel mode blink timer, not needed anymore */
+ if ((old_mode == LED_MODE_KERNEL) && mpled->blink_delay)
+ del_timer(&mpled->blink_timer);
+}
+
+static void mpled_init_led(void __iomem *gpt_mode)
+{
+ u32 val = in_be32(gpt_mode);
+ val |= MPC52xx_GPT_ENABLE_OUTPUT;
+ val &= ~LED_ON;
+ out_be32(gpt_mode, val);
+}
+
+static int __devinit mpled_probe(struct of_device *op,
+ const struct of_device_id *match)
+{
+ struct motionpro_led *mpled;
+ const unsigned int *of_blink_delay;
+ int err;
+
+ dev_dbg(&op->dev, "mpled_probe: node=%s (op=%p, match=%p)\n",
+ op->node->name, op, match);
+
+ mpled = kzalloc(sizeof(*mpled), GFP_KERNEL);
+ if (!mpled)
+ return -ENOMEM;
+
+ mpled->gpt = mpc52xx_map_node(op->node);
+ if (!mpled->gpt) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error mapping GPT registers for LED %s\n",
+ op->node->name);
+ err = -EIO;
+ goto err_free;
+ }
+
+ /* initialize GPT for LED use */
+ mpled_init_led(&mpled->gpt->mode);
+
+ spin_lock_init(&mpled->led_lock);
+ mpled->mode = LED_MODE_KERNEL;
+
+ /* get 'blink-delay' property if present */
+ of_blink_delay = of_get_property(op->node, "blink-delay", NULL);
+ mpled->blink_delay = of_blink_delay ? *of_blink_delay : 0;
+ dev_dbg(&op->dev, "mpled_probe: blink_delay = %d msec\n",
+ mpled->blink_delay);
+
+ /* initialize kernel blink_timer if blink_delay was provided */
+ if (mpled->blink_delay) {
+ init_timer(&mpled->blink_timer);
+ mpled->blink_timer.function = mpled_timer_toggle;
+ mpled->blink_timer.data = (unsigned long)mpled;
+
+ mod_timer(&mpled->blink_timer,
+ jiffies + msecs_to_jiffies(mpled->blink_delay));
+ }
+
+ /* register LED classdev */
+ mpled->mpled_cdev.name = op->node->name;
+ mpled->mpled_cdev.brightness_set = mpled_set;
+ mpled->mpled_cdev.default_trigger = "timer";
+
+ err = led_classdev_register(NULL, &mpled->mpled_cdev);
+ if (err) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error registering class device for LED %s\n",
+ op->node->name);
+ goto err;
+ }
+
+ dev_set_drvdata(&op->dev, mpled);
+ return 0;
+
+err:
+ if (mpled->blink_delay)
+ del_timer(&mpled->blink_timer);
+ iounmap(mpled->gpt);
+err_free:
+ kfree(mpled);
+
+ return err;
+}
+
+static int mpled_remove(struct of_device *op)
+{
+ struct motionpro_led *mpled = dev_get_drvdata(&op->dev);
+
+ dev_dbg(&op->dev, "mpled_remove: (%p)\n", op);
+
+ if (mpled->blink_delay && (mpled->mode == LED_MODE_KERNEL))
+ del_timer(&mpled->blink_timer);
+
+ led_classdev_unregister(&mpled->mpled_cdev);
+
+ iounmap(mpled->gpt);
+ kfree(mpled);
+
+ return 0;
+}
+
+static struct of_device_id mpled_match[] = {
+ { .compatible = "promess,motionpro-readyled", },
+ { .compatible = "promess,motionpro-statusled", },
+ {},
+};
+
+static struct of_platform_driver mpled_driver = {
+ .match_table = mpled_match,
+ .probe = mpled_probe,
+ .remove = mpled_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "leds-motionpro",
+ },
+};
+
+static int __init mpled_init(void)
+{
+ return of_register_platform_driver(&mpled_driver);
+}
+
+static void __exit mpled_exit(void)
+{
+ of_unregister_platform_driver(&mpled_driver);
+}
+
+module_init(mpled_init);
+module_exit(mpled_exit);
+
+MODULE_LICENSE("GPL")
+MODULE_DESCRIPTION("Motion-PRO LED driver");
+MODULE_AUTHOR("Jan Wrobel <wrr@semihalf.com>");
+MODULE_AUTHOR("Marian Balakowicz <m8@semihalf.com>");
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index 1887b13..d8e4ada 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -147,6 +147,11 @@ struct mpc52xx_gpio {
#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5
#define MPC52xx_GPIO_PCI_DIS (1<<15)
+/* Enables GPT register to operate as simple GPIO output register */
+#define MPC52xx_GPT_ENABLE_OUTPUT 0x00000024
+/* Puts 1 on GPT output pin */
+#define MPC52xx_GPT_OUTPUT_1 0x00000010
+
/* GPIO with WakeUp*/
struct mpc52xx_gpio_wkup {
u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 12/13] [POWERPC] Promess Motion-PRO DTS
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (10 preceding siblings ...)
2007-11-06 20:06 ` [PATCH v3 11/13] [POWERPC] Motion-PRO: Add LED support Marian Balakowicz
@ 2007-11-06 20:06 ` Marian Balakowicz
2007-11-06 22:42 ` David Gibson
2007-11-06 20:06 ` [PATCH v3 13/13] [POWERPC] Promess Motion-PRO defconfig Marian Balakowicz
12 siblings, 1 reply; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:06 UTC (permalink / raw)
To: linuxppc-dev
Add device tree source file for Motion-PRO board.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/boot/dts/motionpro.dts | 309 +++++++++++++++++++++++++++++++++++
1 files changed, 309 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/motionpro.dts
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
new file mode 100644
index 0000000..6124dd5
--- /dev/null
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -0,0 +1,309 @@
+/*
+ * Motion-PRO board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+ model = "promess,motionpro";
+ compatible = "promess,motionpro","mpc5200-simple-platform";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ model = "fsl,mpc5200b";
+ compatible = "fsl,mpc5200b";
+ revision = ""; // from bootloader
+ device_type = "soc";
+ ranges = <0 f0000000 0000c000>;
+ reg = <f0000000 00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "mpc5200b-cdm","mpc5200-cdm";
+ reg = <200 38>;
+ };
+
+ mpc5200_pic: pic@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "mpc5200b-pic","mpc5200-pic";
+ reg = <500 80>;
+ };
+
+ gpt@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,has-wdt;
+ };
+
+ gpt@610 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <610 10>;
+ interrupts = <1 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@620 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <620 10>;
+ interrupts = <1 b 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@630 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <630 10>;
+ interrupts = <1 c 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@640 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <640 10>;
+ interrupts = <1 d 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@650 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <650 10>;
+ interrupts = <1 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ motionpro-statusled@660 { // Motion-PRO status LED
+ compatible = "promess,motionpro-statusled";
+ reg = <660 10>;
+ interrupts = <1 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ blink-delay = <64>; // 100 msec
+ };
+
+ motionpro-readyled@670 { // Motion-PRO ready LED
+ compatible = "promess,motionpro-readyled";
+ reg = <670 10>;
+ interrupts = <1 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "mpc5200b-rtc","mpc5200-rtc";
+ reg = <800 100>;
+ interrupts = <1 5 0 1 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ mscan@980 {
+ compatible = "mpc5200b-mscan","mpc5200-mscan";
+ interrupts = <2 12 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ reg = <980 80>;
+ };
+
+ gpio@b00 {
+ compatible = "mpc5200b-gpio","mpc5200-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpio-wkup@c00 {
+ compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
+ reg = <c00 40>;
+ interrupts = <1 8 0 0 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+
+ spi@f00 {
+ device_type = "spi";
+ compatible = "mpc5200b-spi","mpc5200-spi";
+ reg = <f00 20>;
+ interrupts = <2 d 0 2 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ usb@1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ dma-controller@1200 {
+ compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ xlb@1f00 {
+ compatible = "mpc5200b-xlb","mpc5200-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial@2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+ port-number = <0>; // Logical port assignment
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ // PSC2 in spi master mode
+ spi@2200 { // PSC2
+ compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
+ cell-index = <1>;
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ // PSC5 in uart mode
+ serial@2800 { // PSC5
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+ port-number = <4>; // Logical port assignment
+ reg = <2800 100>;
+ interrupts = <2 c 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "mpc5200b-fec","mpc5200-fec";
+ reg = <3000 800>;
+ local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+ interrupts = <2 5 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ata@3a00 {
+ compatible = "mpc5200b-ata","mpc5200-ata";
+ reg = <3a00 100>;
+ interrupts = <2 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i2c@3d40 {
+ compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ };
+
+ sram@8000 {
+ compatible = "mpc5200b-sram","mpc5200-sram";
+ reg = <8000 4000>;
+ };
+ };
+
+ lpb {
+ model = "fsl,lpb";
+ compatible = "fsl,lpb";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 50000000 00010000
+ 2 0 50010000 00010000
+ 3 0 50020000 00010000>;
+
+ // 8-bit DualPort SRAM on LocalPlus Bus CS1
+ kollmorgen@1,0 {
+ compatible = "promess,motionpro-kollmorgen";
+ reg = <1 0 10000>;
+ interrupts = <1 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ // 8-bit board CPLD on LocalPlus Bus CS2
+ cpld@2,0 {
+ compatible = "promess,motionpro-cpld";
+ reg = <2 0 10000>;
+ };
+
+ // 8-bit custom Anybus Module on LocalPlus Bus CS3
+ anybus@3,0 {
+ compatible = "promess,motionpro-anybus";
+ reg = <3 0 10000>;
+ };
+ pro_module_general@3,0 {
+ compatible = "promess,pro_module_general";
+ reg = <3 0 3>;
+ };
+ pro_module_dio@3,800 {
+ compatible = "promess,pro_module_dio";
+ reg = <3 800 2>;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "mpc5200b-pci","mpc5200-pci";
+ reg = <f0000d00 100>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+ c000 0 0 2 &mpc5200_pic 1 1 3
+ c000 0 0 3 &mpc5200_pic 1 2 3
+ c000 0 0 4 &mpc5200_pic 1 3 3
+
+ c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+ c800 0 0 2 &mpc5200_pic 1 2 3
+ c800 0 0 3 &mpc5200_pic 1 3 3
+ c800 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 20000000
+ 02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 b0000000 0 01000000>;
+ };
+};
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [PATCH v3 12/13] [POWERPC] Promess Motion-PRO DTS
2007-11-06 20:06 ` [PATCH v3 12/13] [POWERPC] Promess Motion-PRO DTS Marian Balakowicz
@ 2007-11-06 22:42 ` David Gibson
2007-11-09 14:22 ` Marian Balakowicz
2007-11-09 17:49 ` Grant Likely
0 siblings, 2 replies; 26+ messages in thread
From: David Gibson @ 2007-11-06 22:42 UTC (permalink / raw)
To: Marian Balakowicz; +Cc: linuxppc-dev
On Tue, Nov 06, 2007 at 09:06:34PM +0100, Marian Balakowicz wrote:
> Add device tree source file for Motion-PRO board.
>
> Signed-off-by: Marian Balakowicz <m8@semihalf.com>
[snip]
> + motionpro-statusled@660 { // Motion-PRO status LED
> + compatible = "promess,motionpro-statusled";
> + reg = <660 10>;
> + interrupts = <1 f 0>;
> + interrupt-parent = <&mpc5200_pic>;
> + blink-delay = <64>; // 100 msec
> + };
> +
> + motionpro-readyled@670 { // Motion-PRO ready LED
> + compatible = "promess,motionpro-readyled";
> + reg = <670 10>;
> + interrupts = <1 10 0>;
> + interrupt-parent = <&mpc5200_pic>;
> + };
Is there actually any difference in behaviour betweeen the two LEDs?
If not, they should probably have the same compatible value, and
perhaps a "label" property or some such to associate them with a
particular LED.
[snip]
> + spi@f00 {
> + device_type = "spi";
No device_type!
> + compatible = "mpc5200b-spi","mpc5200-spi";
> + reg = <f00 20>;
> + interrupts = <2 d 0 2 e 0>;
> + interrupt-parent = <&mpc5200_pic>;
> + };
> +
> + usb@1000 {
> + device_type = "usb-ohci-be";
Nor here.
> + compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
> + reg = <1000 ff>;
> + interrupts = <2 6 0>;
> + interrupt-parent = <&mpc5200_pic>;
> + };
[snip]
> + // PSC2 in spi master mode
> + spi@2200 { // PSC2
> + compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
> + cell-index = <1>;
>From your description, this is an incorrect usage of cell-index - it
should *only* be used to index into SoC shared registers; never for
logical numbering.
> + reg = <2200 100>;
> + interrupts = <2 2 0>;
> + interrupt-parent = <&mpc5200_pic>;
> + };
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 12/13] [POWERPC] Promess Motion-PRO DTS
2007-11-06 22:42 ` David Gibson
@ 2007-11-09 14:22 ` Marian Balakowicz
2007-11-09 17:49 ` Grant Likely
1 sibling, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-09 14:22 UTC (permalink / raw)
To: David Gibson; +Cc: linuxppc-dev
David Gibson wrote:
> On Tue, Nov 06, 2007 at 09:06:34PM +0100, Marian Balakowicz wrote:
>> Add device tree source file for Motion-PRO board.
> [snip]
>> + motionpro-statusled@660 { // Motion-PRO status LED
>> + compatible = "promess,motionpro-statusled";
>> + reg = <660 10>;
>> + interrupts = <1 f 0>;
>> + interrupt-parent = <&mpc5200_pic>;
>> + blink-delay = <64>; // 100 msec
>> + };
>> +
>> + motionpro-readyled@670 { // Motion-PRO ready LED
>> + compatible = "promess,motionpro-readyled";
>> + reg = <670 10>;
>> + interrupts = <1 10 0>;
>> + interrupt-parent = <&mpc5200_pic>;
>> + };
>
> Is there actually any difference in behaviour betweeen the two LEDs?
> If not, they should probably have the same compatible value, and
> perhaps a "label" property or some such to associate them with a
> particular LED.
In fact they are identical, so I have used the same compatible
property and added label property do distinguish them.
> [snip]
>> + spi@f00 {
>> + device_type = "spi";
>
> No device_type!
Removed.
>> + compatible = "mpc5200b-spi","mpc5200-spi";
>> + reg = <f00 20>;
>> + interrupts = <2 d 0 2 e 0>;
>> + interrupt-parent = <&mpc5200_pic>;
>> + };
>> +
>> + usb@1000 {
>> + device_type = "usb-ohci-be";
>
> Nor here.
Removed.
> [snip]
>> + // PSC2 in spi master mode
>> + spi@2200 { // PSC2
>> + compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
>> + cell-index = <1>;
>
>>From your description, this is an incorrect usage of cell-index - it
> should *only* be used to index into SoC shared registers; never for
> logical numbering.
Again true, but the situation is similar to the one with the "serial"
node.
Cheers,
m.
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 12/13] [POWERPC] Promess Motion-PRO DTS
2007-11-06 22:42 ` David Gibson
2007-11-09 14:22 ` Marian Balakowicz
@ 2007-11-09 17:49 ` Grant Likely
1 sibling, 0 replies; 26+ messages in thread
From: Grant Likely @ 2007-11-09 17:49 UTC (permalink / raw)
To: Marian Balakowicz, linuxppc-dev
On 11/6/07, David Gibson <david@gibson.dropbear.id.au> wrote:
> On Tue, Nov 06, 2007 at 09:06:34PM +0100, Marian Balakowicz wrote:
> [snip]
> > + // PSC2 in spi master mode
> > + spi@2200 { // PSC2
> > + compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
> > + cell-index = <1>;
>
> From your description, this is an incorrect usage of cell-index - it
> should *only* be used to index into SoC shared registers; never for
> logical numbering.
Actually, this one is correct. PSCs are numbered in the data sheet
from PSC1 to PSC6; so cell-index = <0> for PSC1, cell-index = <1> for
PSC2, etc.
Cheers,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v3 13/13] [POWERPC] Promess Motion-PRO defconfig
2007-11-06 20:04 [PATCH v3 00/13] [POWERPC] Add TQM5200/CM5200/Motion-PRO board support Marian Balakowicz
` (11 preceding siblings ...)
2007-11-06 20:06 ` [PATCH v3 12/13] [POWERPC] Promess Motion-PRO DTS Marian Balakowicz
@ 2007-11-06 20:06 ` Marian Balakowicz
12 siblings, 0 replies; 26+ messages in thread
From: Marian Balakowicz @ 2007-11-06 20:06 UTC (permalink / raw)
To: linuxppc-dev
Add Motion-PRO board defconfig file.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
arch/powerpc/configs/motionpro_defconfig | 989 ++++++++++++++++++++++++++++++
1 files changed, 989 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/configs/motionpro_defconfig
diff --git a/arch/powerpc/configs/motionpro_defconfig b/arch/powerpc/configs/motionpro_defconfig
new file mode 100644
index 0000000..fd7a327
--- /dev/null
+++ b/arch/powerpc/configs/motionpro_defconfig
@@ -0,0 +1,989 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Mon Oct 29 14:11:27 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200=y
+# CONFIG_PPC_MPC5200_BUGFIX is not set
+CONFIG_PPC_MPC5200_SIMPLE=y
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_PPC_BESTCOMM is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_HIBERNATION is not set
+CONFIG_SECCOMP=y
+# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_MPC52xx=y
+CONFIG_PATA_PLATFORM=y
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_MV643XX_ETH is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_MOTIONPRO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_PPC_CLOCK=y
^ permalink raw reply related [flat|nested] 26+ messages in thread