* [PATCH 1/7] b43legacy: use the retry limits provided by mac80211
@ 2007-11-06 21:48 Stefano Brivio
0 siblings, 0 replies; only message in thread
From: Stefano Brivio @ 2007-11-06 21:48 UTC (permalink / raw)
To: John Linville; +Cc: bcm43xx-dev, linux-wireless, Larry Finger
Use the retry limits provided by mac80211.
The patch to b43 by Michael Buesch <mb@bu3sch.de> has been ported to
b43legacy.
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
----
Index: wireless-2.6/drivers/net/wireless/b43legacy/main.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43legacy/main.c
+++ wireless-2.6/drivers/net/wireless/b43legacy/main.c
@@ -75,14 +75,6 @@ module_param_named(bad_frames_preempt, m
MODULE_PARM_DESC(bad_frames_preempt, "enable(1) / disable(0) Bad Frames"
" Preemption");
-static int modparam_short_retry = B43legacy_DEFAULT_SHORT_RETRY_LIMIT;
-module_param_named(short_retry, modparam_short_retry, int, 0444);
-MODULE_PARM_DESC(short_retry, "Short-Retry-Limit (0 - 15)");
-
-static int modparam_long_retry = B43legacy_DEFAULT_LONG_RETRY_LIMIT;
-module_param_named(long_retry, modparam_long_retry, int, 0444);
-MODULE_PARM_DESC(long_retry, "Long-Retry-Limit (0 - 15)");
-
static char modparam_fwpostfix[16];
module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
MODULE_PARM_DESC(fwpostfix, "Postfix for the firmware files to load.");
@@ -2927,6 +2919,20 @@ static void b43legacy_imcfglo_timeouts_w
#endif /* CONFIG_SSB_DRIVER_PCICORE */
}
+/* Write the short and long frame retry limit values. */
+static void b43legacy_set_retry_limits(struct b43legacy_wldev *dev,
+ unsigned int short_retry,
+ unsigned int long_retry)
+{
+ /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
+ * the chip-internal counter. */
+ short_retry = min(short_retry, (unsigned int)0xF);
+ long_retry = min(long_retry, (unsigned int)0xF);
+
+ b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0006, short_retry);
+ b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0007, long_retry);
+}
+
/* Shutdown a wireless core */
/* Locking: wl->mutex */
static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
@@ -3064,16 +3070,9 @@ static int b43legacy_wireless_core_init(
}
b43legacy_hf_write(dev, hf);
- /* Short/Long Retry Limit.
- * The retry-limit is a 4-bit counter. Enforce this to avoid overflowing
- * the chip-internal counter.
- */
- tmp = limit_value(modparam_short_retry, 0, 0xF);
- b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
- 0x0006, tmp);
- tmp = limit_value(modparam_long_retry, 0, 0xF);
- b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
- 0x0007, tmp);
+ b43legacy_set_retry_limits(dev,
+ B43legacy_DEFAULT_SHORT_RETRY_LIMIT,
+ B43legacy_DEFAULT_LONG_RETRY_LIMIT);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
0x0044, 3);
@@ -3250,19 +3249,41 @@ static void b43legacy_stop(struct ieee80
mutex_unlock(&wl->mutex);
}
+static int b43legacy_op_set_retry_limit(struct ieee80211_hw *hw,
+ u32 short_retry_limit,
+ u32 long_retry_limit)
+{
+ struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
+ struct b43legacy_wldev *dev;
+ int err = 0;
+
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (unlikely(!dev ||
+ (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED))) {
+ err = -ENODEV;
+ goto out_unlock;
+ }
+ b43legacy_set_retry_limits(dev, short_retry_limit, long_retry_limit);
+out_unlock:
+ mutex_unlock(&wl->mutex);
+
+ return err;
+}
static const struct ieee80211_ops b43legacy_hw_ops = {
- .tx = b43legacy_tx,
- .conf_tx = b43legacy_conf_tx,
- .add_interface = b43legacy_add_interface,
- .remove_interface = b43legacy_remove_interface,
- .config = b43legacy_dev_config,
- .config_interface = b43legacy_config_interface,
- .configure_filter = b43legacy_configure_filter,
- .get_stats = b43legacy_get_stats,
- .get_tx_stats = b43legacy_get_tx_stats,
- .start = b43legacy_start,
- .stop = b43legacy_stop,
+ .tx = b43legacy_tx,
+ .conf_tx = b43legacy_conf_tx,
+ .add_interface = b43legacy_add_interface,
+ .remove_interface = b43legacy_remove_interface,
+ .config = b43legacy_dev_config,
+ .config_interface = b43legacy_config_interface,
+ .configure_filter = b43legacy_configure_filter,
+ .get_stats = b43legacy_get_stats,
+ .get_tx_stats = b43legacy_get_tx_stats,
+ .start = b43legacy_start,
+ .stop = b43legacy_stop,
+ .set_retry_limit = b43legacy_op_set_retry_limit,
};
/* Hard-reset the chip. Do not call this directly.
Index: wireless-2.6/drivers/net/wireless/b43legacy/xmit.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43legacy/xmit.c
+++ wireless-2.6/drivers/net/wireless/b43legacy/xmit.c
@@ -290,6 +290,8 @@ static void generate_txhdr_fw3(struct b4
mac_ctl |= B43legacy_TX4_MAC_STMSDU;
if (rate_fb_ofdm)
mac_ctl |= B43legacy_TX4_MAC_FALLBACKOFDM;
+ if (txctl->flags & IEEE80211_TXCTL_LONG_RETRY_LIMIT)
+ mac_ctl |= B43legacy_TX4_MAC_LONGFRAME;
/* Generate the RTS or CTS-to-self frame */
if ((txctl->flags & IEEE80211_TXCTL_USE_RTS_CTS) ||
@@ -335,7 +337,6 @@ static void generate_txhdr_fw3(struct b4
len, rts_rate_fb);
hdr = (struct ieee80211_hdr *)(&txhdr->rts_frame);
txhdr->rts_dur_fb = hdr->duration_id;
- mac_ctl |= B43legacy_TX4_MAC_LONGFRAME;
}
/* Magic cookie */
--
Ciao
Stefano
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-11-06 22:13 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-11-06 21:48 [PATCH 1/7] b43legacy: use the retry limits provided by mac80211 Stefano Brivio
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.